Sell: BSI Standards page 60 In the Cheapest

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

BS 5521:1977, ISO 1809-1977 BS 5521:1977, ISO 1809-1977. Specification for textile machinery and accessories – types of formers for yarn packages – nomenclature
BS 5753:Part 1:1979 BS 5753:Part 1:1979. Textile machinery and accessories: pirns for winding at the loom. Specification for weft pirns without rings
BS 5948:Part 1:1980, ISO 4814-1980 BS 5948:Part 1:1980, ISO 4814-1980. Household sewing machines. Method for determination of the stability of needle thread tension
BS 5948:Part 2:1981, ISO 4815-1980 BS 5948:Part 2:1981, ISO 4815-1980. Household sewing machines. Method for determination of sewing capacity
BS 6246:Part 2:1983 BS 6246:Part 2:1983. Industrial laundry machinery. Methods for the assessment of the effect of extracting machines on textiles
BS 6246:Part 4:1983 BS 6246:Part 4:1983. Industrial laundry machinery. Methods for the assessment of the effect of batch drying tumblers on textiles
BS 6378:1983, ISO 94-1982 BS 6378:1983, ISO 94-1982. Specification for dimensions of spindle gauges for ring-spinning and ring-doubling frames
BS 953:1979 BS 953:1979. Methods of test for safety and protective footwear
BS 2495:1977 BS 2495:1977. Specification for protective helmets for vehicle users (high protection)
BS 6473:1984 BS 6473:1984. Specification for protective hats for horse and pony riders
BS 4110:1979 BS 4110:1979. Specification for eye-protectors for vehicle users
BS 4224:1982 BS 4224:1982. Specification for yachtsmen’s safety harnesses and safety lines
BS 4423:1969 BS 4423:1969. Specification for climbers’ helmets
BS 4474:1979 BS 4474:1979. Specification for safety harnesses and safety lines for use by children in yachts
BS 5243:1975 BS 5243:1975. General principles for sampling airborne radioactive materials
BS 5361:1976 BS 5361:1976. Specification. Protective helmets for vehicle users
BS 6183-1:1981 BS 6183-1:1981. Protective equipment for cricketers. Specification for batting gloves, leg guards and boxes
BS 3102:1959 BS 3102:1959. Specification for brass eyelets and washers for general purposes
BS 4985:1973 BS 4985:1973. Conversion table for replacing traditional yarn numbers by rounded values in the Tex System
BS 2457:1975 BS 2457:1975. Specification for protractors for drawing office use
BS 2459:1974 BS 2459:1974. Specification for set squares (fixed and adjustable) for drawing office use
BS 6381:1983 BS 6381:1983. Specification for drawing boards
BS EN ISO 6414:1995 BS EN ISO 6414:1995. Technical drawings for glassware
BS 1646-1:1979, ISO 3511/I-1977 BS 1646-1:1979, ISO 3511/I-1977. Symbolic representation for process measurement control functions and instrumentation. Basic requirements
BS 1646-2:1983 BS 1646-2:1983. Symbolic representation for process measurement control functions and instrumentation. Specification for additional basic requirements
BS 1646-3:1984 BS 1646-3:1984. Symbolic representation for process measurement control functions and instrumentation. Specification for detailed symbols for instrument interconnection diagrams
BS 1646-4:1984 BS 1646-4:1984. Symbolic representation for process measurement control functions and instrumentation. Specification for basic symbols for process computer, interface and shared display/control functions
BS 3238-1:1960 BS 3238-1:1960. Graphical symbols for components of servo-mechanisms. Transductors and magnetic amplifiers
BS 3238-2:1964 BS 3238-2:1964. Graphical symbols for components of servo-mechanisms. General servo-mechanisms
BS 3363:1980, IEC 60148:1969 BS 3363:1980, IEC 60148:1969. Specification for letter symbols for semiconductor devices and integrated microcircuits
BS 3363:Supplement No. 1:1981, IEC 60148A:1974 BS 3363:Supplement No. 1:1981, IEC 60148A:1974. Specification for letter symbols for semiconductor devices and integrated microcircuits
BS 3363:Supplement No. 2:1981, IEC 60148B:1979 BS 3363:Supplement No. 2:1981, IEC 60148B:1979. Specification for letter symbols for semiconductor devices and integrated microcircuits
BS 2856:1973 BS 2856:1973. Precise conversion of inch and metric sizes on engineering drawings
PD 6470:1981 PD 6470:1981. The management of design for economic production. Standardization philosophy aimed at improving the performance of the electrical and mechanical manufacturing sectors
PD 6481:1977 PD 6481:1977. Recommendations for the use of preferred numbers and preferred sizes
PD 6507:1982 PD 6507:1982. Guidance on metric screw threads and fasteners for use by model engineers
PD 7300:1979 PD 7300:1979. Nuts and bolts: recommended drawing ratios for schools and colleges
BS 3903:1977 BS 3903:1977. Methods of test for sulphuric acid, oleum and liquid sulphur trioxide
BS 4341:1968 BS 4341:1968. Methods of test for formic acid
BS 4367:1968 BS 4367:1968. Methods of test for nitric acid
BS 4404:1968 BS 4404:1968. Method for the determination of arsenic (silver diethyldithiocarbamate procedure)
BS 4450:1976, EN 7:1974 BS 4450:1976, EN 7:1974. Determination of ash from petroleum products
BS 4459:1978 BS 4459:1978. Method for calculating viscosity index of petroleum products and lubricants from kinematic viscosity
BS 4695:1980, ISO 3841-1977 BS 4695:1980, ISO 3841-1977. Method for determination of melting point of petroleum wax (cooling curve)
BS 4714:1980, ISO 3675-1976 BS 4714:1980, ISO 3675-1976. Method for laboratory determination of density or relative density of crude petroleum and liquid petroleum products (hydrometer method)
BS 4774:1972 BS 4774:1972. Methods of test for chloroform for industrial use
BS 5072-1:1974 BS 5072-1:1974. Methods of test for sodium fluoride for industrial use. Determination of water-insoluble matter
BS 5072-2:1974 BS 5072-2:1974. Methods of test for sodium fluoride for industrial use. Determination of moisture content
BS 5072-3:1975 BS 5072-3:1975. Methods of test for sodium fluoride for industrial use. Determination of fluorine content
BS 5072-4:1980, ISO 3428-1976 BS 5072-4:1980, ISO 3428-1976. Methods of test for sodium fluoride for industrial use. Preparation and storage of test samples
BS 5072-5:1980, ISO 3429-1976 BS 5072-5:1980, ISO 3429-1976. Methods of test for sodium fluoride for industrial use. Determination of iron content
BS 5072-6:1980, ISO 3430-1976 BS 5072-6:1980, ISO 3430-1976. Methods of test for sodium fluoride for industrial use. Determination of silica content
BS 5072-7:1980, ISO 3431-1976 BS 5072-7:1980, ISO 3431-1976. Methods of test for sodium fluoride for industrial use. Determination of soluble sulphates content
BS 5072-8:1980, ISO 3566-1976 BS 5072-8:1980, ISO 3566-1976. Methods of test for sodium fluoride for industrial use. Determination of chlorides content
BS 5072-9:1980, ISO 4278-1976 BS 5072-9:1980, ISO 4278-1976. Methods of test for sodium fluoride for industrial use. Determination of carbonate content
BS 5309-1:1976 BS 5309-1:1976. Methods for sampling chemical products. Introduction and general principles
BS 5309-2:1976 BS 5309-2:1976. Methods for sampling chemical products. Sampling of gases
BS 5309-3:1976 BS 5309-3:1976. Methods for sampling chemical products. Sampling of liquids
BS 5309-4:1976 BS 5309-4:1976. Methods for sampling chemical products. Sampling of solids
BS 187:1978 BS 187:1978. Specification for calcium silicate (sandlime and flintlime) bricks
BS 5443:1977 BS 5443:1977. Recommendations for a standard layout for methods of chemical analysis by gas chromatography
BS 5634:1978 BS 5634:1978. Methods of test for potassium hydroxide
BS 5688-1:1979, ISO 1914:1972 BS 5688-1:1979, ISO 1914:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of boric acid content of boric acid
BS 5688-3:1979, ISO 1916:1972 BS 5688-3:1979, ISO 1916:1972. Methods of test for boric acid, boric oxide, diRsodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sodium oxide and boric oxide contents and loss on ignition of disodium tetraborates
BS 5688-4:1979, ISO 1917:1972 BS 5688-4:1979, ISO 1917:1972. Methods of test for boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sodium oxide, boric oxide and available oxygen contents of hydrated sodium perborates
BS 5688-5:1979, ISO 1918:1972 BS 5688-5:1979, ISO 1918:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sulphur compounds in boric acid, boric oxide, disodium tetraborates and crude sodium borates
BS 5688-6:1979, ISO 2214:1972 BS 5688-6:1979, ISO 2214:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of manganese content of boric acid, boric oxide and disodium tetraborates
BS 5688-7:1979, ISO 2215:1972 BS 5688-7:1979, ISO 2215:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of copper content of boric acid, boric oxide and disodium tetraborates
BS 5688-8:1979, ISO 2216:1972 BS 5688-8:1979, ISO 2216:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of sodium oxide and boric oxide contents of crude sodium borates
BS 5688-9:1979, ISO 2218:1972 BS 5688-9:1979, ISO 2218:1972. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of loss in mass of crude sodium borates after heating at a temperature of 900°C
BS 5688-10:1979, ISO 2217:1975 BS 5688-10:1979, ISO 2217:1975. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of matter insoluble in alkaline medium and preparation of test solutions of crude sodium borates
BS 5688-11:1979, ISO 2760:1975 BS 5688-11:1979, ISO 2760:1975. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total aluminium content of crude sodium borates
BS 5688-12:1979, ISO 2761:1975 BS 5688-12:1979, ISO 2761:1975. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of total titanium content of crude sodium borates
BS 5688-13:1979, ISO 3118:1976 BS 5688-13:1979, ISO 3118:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of particle size distribution of sodium perborates by mechanical sieving
BS 5688-14:1979, ISO 3119:1976 BS 5688-14:1979, ISO 3119:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of chromium content of boric acid, boric oxide and disodium tetraborates
BS 5688-15:1979, ISO 3120:1976 BS 5688-15:1979, ISO 3120:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of water content of disodium tetraborates and crude sodium borates
BS 5688-16:1979, ISO 3121:1976 BS 5688-16:1979, ISO 3121:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of chloride content of boric acid, boric oxide and disodium tetraborates
BS 5688-17:1979, ISO 3122:1976 BS 5688-17:1979, ISO 3122:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of iron content of boric acid, boric oxide, disodium tetraborates, sodium perborates and crude sodium borates
BS 5688-18:1979, ISO 3123:1976 BS 5688-18:1979, ISO 3123:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of rate of solution of sodium perborates
BS 5688-19:1979, ISO 3124:1976 BS 5688-19:1979, ISO 3124:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of iron soluble in alkaline medium in crude sodium borates
BS 5688-20:1979, ISO 3125:1976 BS 5688-20:1979, ISO 3125:1976. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of aluminium soluble in alkaline medium in crude sodium borates
BS 5688-21:1979, ISO 3424:1975 BS 5688-21:1979, ISO 3424:1975. Methods of test for orthoboric acid (boric acid), diboron trioxide (boric oxide), disodium tetraborates, sodium perborates and crude sodium borates for industrial use. Determination of bulk density of sodium perborates
BS 5656:1983, EN 115:1983 BS 5656:1983, EN 115:1983. Safety rules for the construction and installation of escalators and passenger conveyors
BS 5965:1980 BS 5965:1980. Specification for manually driven balanced personal homelifts
BS 6440:1983 BS 6440:1983. Code of practice for powered lifting platforms for use by disabled persons
BS 466:1984 BS 466:1984. Specification for power driven overhead travelling cranes, semi-goliath and goliath cranes for general use
BS 4737-3.1:1977 BS 4737-3.1:1977. Intruder alarm systems. Specifications for components. Continuous wiring
BS 4737-3.2:1977 BS 4737-3.2:1977. Intruder alarm systems. Specifications for components. Foil on glass
BS 4737-3.3:1977 BS 4737-3.3:1977. Intruder alarm systems. Specifications for components. Protective switches
BS 4737-3.4:1978 BS 4737-3.4:1978. Intruder alarm systems. Specifications for components. Radiowave Doppler detectors
BS 4737-3.5:1978 BS 4737-3.5:1978. Intruder alarm systems. Specifications for components. Ultrasonic movement detectors
BS 4737-3.6:1978 BS 4737-3.6:1978. Intruder alarm systems. Specifications for components. Acoustic detectors
BS 4737-3.7:1978 BS 4737-3.7:1978. Intruder alarm systems. Specifications for components. Passive infra-red detectors
BS 4737-3.8:1978 BS 4737-3.8:1978. Intruder alarm systems. Specifications for components. Volumetric capacitive detectors
BS 4737-3.9:1978 BS 4737-3.9:1978. Intruder alarm systems. Specifications for components. Pressure mats
BS 4737-3.10:1978 BS 4737-3.10:1978. Intruder alarm systems. Specifications for components. Vibration detectors
BS 4737-3.11:1978 BS 4737-3.11:1978. Intruder alarm systems. Specifications for components. Rigid printed-circuit wiring
BS 4737-3.12:1978 BS 4737-3.12:1978. Intruder alarm systems. Specifications for components. Beam interruption detectors
BS 4737-3.13:1978 BS 4737-3.13:1978. Intruder alarm systems. Specifications for components. Capacitive proximity detectors
BS 5445:Part 1:1977, EN 54-1:1976 BS 5445:Part 1:1977, EN 54-1:1976. Components of automatic fire detection systems. Introduction
BS 5445-5:1977, EN 54-5:1976 BS 5445-5:1977, EN 54-5:1976. Components of automatic fire detection systems. Heat sensitive detectors – point detectors containing a static element
BS 5445-7:1984, EN 54-7:1982 BS 5445-7:1984, EN 54-7:1982. Components of automatic fire detection systems. Specification for point-type smoke detectors using scattered light, transmitted light or ionization
BS 5445-8:1984, EN 54-8:1982 BS 5445-8:1984, EN 54-8:1982. Components of automatic fire detection systems. Specification for high temperature heat detectors
BS 5445-9:1984, EN 54-9:1982 BS 5445-9:1984, EN 54-9:1982. Components of automatic fire detection systems. Methods of test of sensitivity to fire
BS 5839-2:1983 BS 5839-2:1983. Fire detection and alarm systems for buildings. Specification for manual call points
BS 3251:1976 BS 3251:1976. Specification. Indicator plates for fire hydrants and emergency water supplies
BS 5041-3:1975 BS 5041-3:1975. Fire hydrant systems equipment. Specification for inlet breechings for dry riser inlets
BS 5041-4:1975 BS 5041-4:1975. Fire hydrant systems equipment. Specification for boxes for landing valves for dry risers
BS 5041-5:1974 BS 5041-5:1974. Fire hydrant systems equipment. Specification for boxes for foam inlets and dry riser inlets
BS 5306-1:1976 BS 5306-1:1976. Fire extinguishing installations and equipment on premises. Hydrant systems, hose reels and foam inlets
BS 5306-5.2:1984 BS 5306-5.2:1984. Code of practice for fire extinguishing installations and equipment on premises. Halon systems. Halon 1211 total flooding systems
BS 6391:1983 BS 6391:1983. Specification for non-percolating layflat delivery hoses and hose assemblies for fire fighting purposes
BS 6073-2:1981 BS 6073-2:1981. Precast concrete masonry units. Method for specifying precast concrete masonry units
BS 4022:1970 BS 4022:1970. Specification for prefabricated gypsum wallboard panels
BS 5427:1976 BS 5427:1976. Code of practice for performance and loading criteria for profiled sheeting in building
BS 690-2:1981 BS 690-2:1981. Asbestos-cement slates and sheets. Specification for asbestos-cement and cellulose-asbestos-cement flat sheets
BS 690-5:1975 BS 690-5:1975. Asbestos-cement slates and sheets. Lining sheets and panels
BS 690-6:1976 BS 690-6:1976. Asbestos-cement slates and sheets. Fittings for use with corrugated sheets
BS 4154-1:1985 BS 4154-1:1985. Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for material and performance requirements
BS 4154-2:1985 BS 4154-2:1985. Corrugated plastics translucent sheets made from thermo-setting polyester resin (glass fibre reinforced). Specification for profiles and dimensions
BS 1133-5:1985 BS 1133-5:1985. Packaging code. Protection against spoilage of packages and their contents by micro-organisms, insects, mites and rodents
BS 3130:Part 3:1974, BS 1133:Sec18:Subsec1:1974 BS 3130:Part 3:1974, BS 1133:Sec18:Subsec1:1974. Glossary of packaging terms. Glass containers and closures
BS 3130-4:1976 BS 3130-4:1976. Glossary of packaging terms. Metal containers and aerosols
BS 3130-6:1981 BS 3130-6:1981. Glossary of packaging terms. Wooden packaging
BS 3177:1959 BS 3177:1959. Method for determining the permeability to water vapour of flexible sheet materials used for packaging
BS 3951-1.4:1983, ISO 830-1981 BS 3951-1.4:1983, ISO 830-1981. Freight containers. General. Glossary of terminology
BS 5073:1982 BS 5073:1982. Guide to stowage of goods in freight containers
BS 5771:1981, EN 76:1978 BS 5771:1981, EN 76:1978. Specification for packages for certain pre-packed foodstuffs: capacities of glass and metal containers
BS 4155:1967 BS 4155:1967. Specification for dimensions of pallet trucks
BS 1764:1973 BS 1764:1973. Specification for nominal diameters of round built-up tins
BS 2006:1984 BS 2006:1984. Specification for aluminium collapsible tubes
BS 5567:1978 BS 5567:1978. Specification for apertures in tinplate containers to receive plug-in plastics closures
BS 5774:1984, ISO 1361-1983 BS 5774:1984, ISO 1361-1983. Specification for internal diameters of round hermetically sealed metal cans for food and non-carbonated drinks
BS 2987:1958 BS 2987:1958. Notes on the application of statistics to paper testing
BS 3110:1959 BS 3110:1959. Methods for measuring the rub resistance of print
BS 3755:1964 BS 3755:1964. Methods of test for the assessment of odour from packaging materials used for foodstuffs
BS EN 24178:1993, ISO 4178:1980 BS EN 24178:1993, ISO 4178:1980. Specification for information to be recorded in distribution trials involving complete, filled transport packages
BS 1428-B2:1960 BS 1428-B2:1960. Microchemical analysis. Apparatus for the determination of elements by other than combustion methods. Specification for ammonia distillation apparatus (Markham)
BS 1428-D1:1965 BS 1428-D1:1965. Microchemical apparatus. Volumetric analysis. Specification for burettes with pressure-filling device and automatic zero
BS 604:1982, ISO 4788:1980 BS 604:1982, ISO 4788:1980. Specification for graduated glass measuring cylinders
BS 700-1:1982, ISO 835-1:1981 BS 700-1:1982, ISO 835-1:1981. Graduated pipettes. Specification for general requirements
BS 700-2:1982, ISO 835-2:1981 BS 700-2:1982, ISO 835-2:1981. Graduated pipettes. Specification for pipettes for which no waiting time is specified
BS 700-3:1982, ISO 835-4:1981 BS 700-3:1982, ISO 835-4:1981. Graduated pipettes. Specification for blow-out pipettes
BS 2058:1961 BS 2058:1961. Specification for Lunge-Rey weighing pipette
BS 3996:1978 BS 3996:1978. Specification for colour coding for one-mark and graduated pipettes (including requirements for the service performance of the colour coding enamels)
BS 5404-1:1976 BS 5404-1:1976. Specification for plastics laboratory ware. Beakers
BS 5404-2:1977 BS 5404-2:1977. Specification for plastics laboratory ware. Graduated measuring cylinders
BS 5404-3:1977 BS 5404-3:1977. Specification for plastics laboratory ware. Filter funnels
BS 5404-4:1979 BS 5404-4:1979. Specification for plastics laboratory ware. Wash bottles
BS 1900:1976 BS 1900:1976. Specification for secondary reference thermometers
BS 2765:1969 BS 2765:1969. Specification for dimensions of temperature detecting elements and corresponding pockets
BS 3273:1960 BS 3273:1960. Specification for distant indicating thermometers for ships’ refrigerated cargo spaces
BS 4937:Part 1:1973 BS 4937:Part 1:1973. International thermocouple reference tables. Platinum -10% rhodium/platinum thermocouples. Type S
BS 4937:Part 2:1973 BS 4937:Part 2:1973. International thermocouple reference tables. Platinum -13% rhodium/platinum thermocouples. Type R
BS 4937:Part 3:1973 BS 4937:Part 3:1973. International thermocouple reference tables. Iron/copper – nickel thermocouples. Type J
BS 4937:Part 4:1973 BS 4937:Part 4:1973. International thermocouple reference tables. Nickel -chromium/nickel – aluminium thermocouples. Type K
BS 4937:Part 5:1974 BS 4937:Part 5:1974. International thermocouple reference tables. Copper/copper-nickel thermocouples. Type T
BS 4937:Part 6:1974 BS 4937:Part 6:1974. International thermocouple reference tables. Nickel-chromium/copper-nickel thermocouples. Type E
BS 4937:Part 7:1974 BS 4937:Part 7:1974. International thermocouple reference tables. Platinum-30% rhodium/platinum-6% rhodium thermocouples. Type B
BS 5074:1974 BS 5074:1974. Specification for short and long solid-stem thermometers for precision use
BS 5471:1977 BS 5471:1977. Specification for thermometer for use with alcohol hydrometers
BS 1088 & 4079:1966 BS 1088 & 4079:1966. Specifications for plywood for marine craft
BS 1105:1981 BS 1105:1981. Specification for wood wool cement slabs up to 125 mm thick
BS 4841-2:1975 BS 4841-2:1975. Rigid polyurethane (PUR) and polyisocyanurate (PIR) foam for building applications. Laminated board for use as a wall and ceiling insulation
BS 5803-3:1985 BS 5803-3:1985. Thermal insulation for use in pitched roof spaces in dwellings. Specification for cellulose fibre thermal insulation for application by blowing
BS 5803-5:1985 BS 5803-5:1985. Thermal insulation for use in pitched roof spaces in dwellings. Specification for installation of man-made mineral fibre and cellulose fibre insulation
BS 3830:1973 BS 3830:1973. Specification for vitreous enamelled steel building components
BS 1202-1:1974 BS 1202-1:1974. Specification for nails. Specifications for nails. Steel nails
BS 1202-2:1974 BS 1202-2:1974. Specification for nails. Copper nails
BS 1202-3:1974 BS 1202-3:1974. Specification for nails. Aluminium nails
BS 1579:1960 BS 1579:1960. Specification for connectors for timber
BS 2911:1974 BS 2911:1974. Specification for letter plates
BS 4951:1973 BS 4951:1973. Specification for builders’ hardware: lock and latch furniture (doors)
BS 5725:Part 1:1981 BS 5725:Part 1:1981. Emergency exit devices. Specification for panic bolts and panic latches mechanically operated by a horizontal push-bar
BS 5872:1980 BS 5872:1980. Specification for locks and latches for doors in buildings
BS 6181:1981, ISO 6589-1981 BS 6181:1981, ISO 6589-1981. Method of test for air permeability of joints in building
BS 4A 4:1966 BS 4A 4:1966. Test pieces and test methods for metallic materials for aircraft. Metric units
BS 4A 4-1.3:1967 BS 4A 4-1.3:1967. Specification for test pieces and test methods for metallic materials. Tensile tests. Uninterrupted creep and rupture tests. Metric units
BS 2A 24:1962 BS 2A 24:1962. Specification for corrosion-resisting steel hexagonal nuts (B.A and B.S.F. threads) (ordinary, thin, slotted and castle) for aircraft
BS 2A 25:1962 BS 2A 25:1962. Specification for steel hexagonal-headed bolts (B.A. and B.S.F. threads) for aircraft
BS 2A 26:1962 BS 2A 26:1962. Specification for corrosion-resisting steel hexagonal-headed bolts (B.A and B.S.F. threads) for aircraft
BS 2A 27:1962 BS 2A 27:1962. Specification for steel hexagonal nuts (B.A. and B.S.F threads) (ordinary, thin, slotted and castle) for aircraft
BS 2A 29:1962 BS 2A 29:1962. Specification for aluminium alloy hexagonal nuts (B.A and B.S.F. threads) (ordinary and slotted) for aircraft
BS 2A 30:1962 BS 2A 30:1962. Specification for steel hexagonal-headed bolts (B.A. and B.S.F threads) with close tolerance shanks for aircraft
BS 2A 57:1962 BS 2A 57:1962. Specification for steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft
BS 2A 58:1962 BS 2A 58:1962. Specification for steel hexagonal nuts (B.S.F. threads) for shear bolts for aircraft
BS 2A 59:1962 BS 2A 59:1962. Specification for cadmium-plated steel hexagonal-headed bolts (B.A. and B.S.F. threads) with close tolerance shanks for aircraft
BS 2A 60:1962 BS 2A 60:1962. Specification for cadmium-plated steel hexagonal-headed shear bolts (B.S.F. threads) for aircraft
BS 2A 61:1962 BS 2A 61:1962. Specification for aluminium alloy hexagonal headed bolts (B.A. and B.S.F. threads) for aircraft
BS A 101:1969 BS A 101:1969. Specification for general requirements for titanium bolts
BS 3A 102:1962 BS 3A 102:1962. Specification for steel bolts (Unified hexagons and Unified threads) for aircraft
BS 3A 103:1962 BS 3A 103:1962. Specification for steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
BS 3A 104:1962 BS 3A 104:1962. Specification for corrosion-resisting steel bolts (Unified hexagons and Unified threads) for aircraft
BS 3A 105:1962 BS 3A 105:1962. Specification for corrosion-resisting steel nuts (Unified hexagons and Unified threads) (ordinary, thin, slotted and castle) for aircraft
BS 3A 107:1962 BS 3A 107:1962. Specification for aluminium alloy nuts (Unified hexagons and Unified threads) (ordinary and slotted) for aircraft
BS 3A 108:1962 BS 3A 108:1962. Specification for steel bolts (Unified hexagons and Unified threads) with close tolerance shanks for aircraft
BS 2A 110:1962 BS 2A 110:1962. Specification for steel nuts (Unified hexagons and Unified threads) for shear bolts for aircraft
BS 3A 113:1962 BS 3A 113:1962. Specification for steel mushroom head bolts (Unified threads) for aircraft
BS 3A 114:1962 BS 3A 114:1962. Specification for corrosion-resisting steel mushroom head bolts (Unified threads) for aircraft
BS 3A 116:1962 BS 3A 116:1962. Specification for steel pan head bolts (Unified threads) for aircraft
BS 3A 117:1962 BS 3A 117:1962. Specification for corrosion-resisting steel pan head bolts (Unified threads) for aircraft
BS 2A 122; 2A 123; 2A 124:1981 BS 2A 122; 2A 123; 2A 124:1981. Specification for clinch nuts (Unified threads) for aircraft
BS 3A 125 to 3A [...]:1981 BS 3A 125 to 3A [...]:1981. Specification for stiffnuts (Unified threads) for aircraft
BS 3A 169:1962 BS 3A 169:1962. Specification for aluminium alloy bolts (Unified hexagons and Unified threads) for aircraft
BS 3A 170:1962 BS 3A 170:1962. Specification for aluminium alloy mushroom head bolts (Unified threads) for aircraft
BS 3A 171:1962 BS 3A 171:1962. Specification for aluminium alloy pan head bolts (Unified threads) for aircraft
BS 2A 173:1962 BS 2A 173:1962. Specification for 100° countersunk head steel bolts (Unified threads) for aircraft
BS 2A 174:1962 BS 2A 174:1962. Specification for 100° countersunk head corrosion-resisting steel bolts (Unified threads) for aircraft
BS 2A 175:1962 BS 2A 175:1962. Specification for 100° countersunk head aluminium alloy bolts (Unified threads) for aircraft
BS 2A 204; 2A 206 [...]:1963 BS 2A 204; 2A 206 [...]:1963. Specifications for machine screws and nuts (Unified threads) below ? inch for aeronautical purposes
BS 2A 210:1962 BS 2A 210:1962. Specification for brass nuts (Unified hexagons and Unified threads) for aircraft
BS A 211:1961 BS A 211:1961. Specification for 100° countersunk head steel bolts (Unified threads and cruciform recesses) for aircraft
BS A 226:1965 BS A 226:1965. Specification for steel hexagon head bolts (short thread: Class 3A)
BS A 227:1965 BS A 227:1965. Specification for steel pan head bolts (short thread: Class 3A)
BS 3A 228:1979 BS 3A 228:1979. Specification for steel double hexagon bolts 1250 MPa (180 000 lbf/in2) for aircraft
BS 2A 229:1972 BS 2A 229:1972. Specification for hexagonal head steel bolts 160000 lbf/in2 (1100/MPa)
BS 4A 4-1.2:1967 BS 4A 4-1.2:1967. Specification for test pieces and test methods for metallic materials. Tensile tests. Tensile tests – elevated temperature. Metric units
BS 1000[676]:1984 BS 1000[676]:1984. Universal Decimal Classification. English full edition. Paper industry
BS 2922-1:1985, ISO 3689-1983 BS 2922-1:1985, ISO 3689-1983. Strength of wet paper and board. Method for determination of the bursting strength of paper and board after immersion in water
BS 2922-2:1984, ISO 3781-1983 BS 2922-2:1984, ISO 3781-1983. Strength of wet paper and board. Method for determination of the tensile strength of paper and board after immersion in water
BS 2924-1:1983, ISO 6588:1981 BS 2924-1:1983, ISO 6588:1981. Aqueous extracts of paper, board and pulp. Method for determination of pH
BS 3137:1972 BS 3137:1972. Methods for determining the bursting strength of paper and board
BS 3432:1980, ISO 536-1976 BS 3432:1980, ISO 536-1976. Method for determination of grammage of paper and board
BS 3631:1984, ISO 2144-1983 BS 3631:1984, ISO 2144-1983. Method for determination of ash of paper and board
BS 4685:1971 BS 4685:1971. Method for the determination of the wax content of waxed paper and board
BS 4816:1972 BS 4816:1972. Method for the determination of the puncture resistance of board
BS 4817:1972 BS 4817:1972. Method for the determination of the thickness of corrugated fibreboard
BS 6225-1:1982, ISO 3782-1980 BS 6225-1:1982, ISO 3782-1980. Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT tester. Pendulum or spring model
BS 6225-2:1982, ISO 3783-1980 BS 6225-2:1982, ISO 3783-1980. Method for determining the resistance to picking of paper and board: accelerating speed method using the IGT tester. Electric model
BS 4839-1:1972 BS 4839-1:1972. Plastics containers. Containers up to 5 litres capacity
BS 4839-2:1974 BS 4839-2:1974. Plastics containers. Containers over 5 litres and up to 60 litres capacity
BS 6162:1981 BS 6162:1981. Specification for open-mouth sacks manufactured from woven polyolefin tape yarn
BS 3732-2:1980, ISO 1858-1977 BS 3732-2:1980, ISO 1858-1977. Reels for magnetic tape for instrumentation applications. Specification for general purpose reels with 76 mm (3 in) centre hole
BS 3732-3:1980, ISO 3802-1976 BS 3732-3:1980, ISO 3802-1976. Reels for magnetic tape for instrumentation applications. Specification for general purpose reels with 8 mm (5/16 in) centre hole
BS 1101:1977 BS 1101:1977. Specification for pressure containers for paint and other similar substances
BS 4566:1970 BS 4566:1970. Specification for slots for packages for pegboard display
BS 4672-1:1971 BS 4672-1:1971. Guide to hazards in the transport and storage of packages. Climatic hazards
BS 4672-2:1971 BS 4672-2:1971. Guide to hazards in the transport and storage of packages. Climatic hazards (maps and diagrams)
BS 5167:1978, EN 23-1:1978 BS 5167:1978, EN 23-1:1978. Packages for washing and cleaning powders. Dimensions and volumes of cartons and drums from fibreboard
BS 5701:1980 BS 5701:1980. Guide to number-defective charts for quality control
BS 667:1968 BS 667:1968. Specification for portable photoelectric photometers
BS 3880-1:1971 BS 3880-1:1971. Specification for paper tape for data processing. Unpunched paper tape
BS 3880-2:1971 BS 3880-2:1971. Specification for paper tape for data processing. Dimensions and location of punched holes in paper tape
BS 3880-3:1971 BS 3880-3:1971. Specification for paper tape for data processing. Representation of codes on paper tape
BS 3880-4:1972 BS 3880-4:1972. Specification for paper tape for data processing. General requirements for data interchange on punched paper tape
BS 4636-1:1970 BS 4636-1:1970. Punched cards. Unpunched paper cards
BS 4636-2:1970 BS 4636-2:1970. Punched cards. Dimensions and location of rectangular holes in 12-row, 80-column punched cards
BS 3649:1963 BS 3649:1963. Recommendations for original printing plates
BS 4496:1984, ISO 776-1982 BS 4496:1984, ISO 776-1982. Method for determination of acid-insoluble ash of pulp
BS 2913:1957 BS 2913:1957. Methods for the measurement of offset blanket thickness for lithographic printing
BS 4321:1969 BS 4321:1969. Methods of test for printing inks (resistance of prints to various physical and chemical agents)
BS 4432:Part 1:1980, ISO 2469-1977 BS 4432:Part 1:1980, ISO 2469-1977. Methods for determining optical properties of pulp, paper and board. Measurement of diffuse reflectance factor of paper, board and pulps
BS 4432-2:1980, ISO 2470-1977 BS 4432-2:1980, ISO 2470-1977. Methods for determining optical properties of pulp, paper and board. Measurement of diffuse blue reflectance factor (ISO brightness) of paper and board
BS 4432:Part 3:1980, ISO 2471-1977 BS 4432:Part 3:1980, ISO 2471-1977. Methods for determining optical properties of pulp, paper and board. Determination of opacity (paper backing) of paper and board by the diffuse reflectance method
BS 4432-4:1980, ISO 3688-1977 BS 4432-4:1980, ISO 3688-1977. Methods for determining optical properties of pulp, paper and board. Measurement of diffuse blue reflectance factor (ISO brightness) of pulps
BS 612:1966 BS 612:1966. Specification for Nessler cylinders
BS 733:Part 1:1983, ISO 3507-1976 BS 733:Part 1:1983, ISO 3507-1976. Pyknometers. Specification
BS 1752:1983, ISO 4793:1980 BS 1752:1983, ISO 4793:1980. Specification for laboratory sintered or fritted filters including porosity grading
BS 2021:1980, ISO 4800-1977 BS 2021:1980, ISO 4800-1977. Specification for separating and dropping funnels for laboratory use
BS 2461:1983 BS 2461:1983. Specification for gas washing bottles
BS 2586:1979 BS 2586:1979. Specification for glass and reference electrodes for the measurement of pH
BS 2761:1983 BS 2761:1983. Specification for spherical ground joints
BS 3218:1982 BS 3218:1982. Specification for test tubes and boiling tubes
BS 5470:1977 BS 5470:1977. Specification for glass alcohol hydrometers not incorporating a thermometer
BS 5895:1980, ISO 4803-1978 BS 5895:1980, ISO 4803-1978. Specification for borosilicate glass tubing for laboratory apparatus
BS 5922:1980, ISO 4799-1978 BS 5922:1980, ISO 4799-1978. Specification for glass condensers for laboratory use
BS 5849:1980, IEC 60528:1975 BS 5849:1980, IEC 60528:1975. Method of expression of performance of air quality infra-red analysers
BS 5865:1980 BS 5865:1980. Specification for construction and operation of spirit burner for small-scale laboratory flame tests
BS 2846-2:1981, ISO 2602-1980 BS 2846-2:1981, ISO 2602-1980. Guide to statistical interpretation of data. Estimation of the mean: confidence interval
BS 2846-3:1975, ISO 3207:1975 BS 2846-3:1975, ISO 3207:1975. Guide to statistical interpretation of data. Determination of a statistical tolerance interval
BS 2846-4:1976, ISO 2854-1976 BS 2846-4:1976, ISO 2854-1976. Guide to statistical interpretation of data. Techniques of estimation and tests relating to means and variances
BS 2846-5:1977, ISO 3494-1976 BS 2846-5:1977, ISO 3494-1976. Guide to statistical interpretation of data. Power of tests relating to means and variances
BS 2846-6:1976, ISO 3301-1975 BS 2846-6:1976, ISO 3301-1975. Guide to statistical interpretation of data. Comparison of two means in the case of paired observations
BS 2846:Part 7:1984 BS 2846:Part 7:1984. Guide to statistical interpretation of data. Tests for departure from normality
BS 5668:Part 2:1983, ISO 7210-1983 BS 5668:Part 2:1983, ISO 7210-1983. Routine analytical cigarette smoking machine. Methods of non-routine evaluation
BS 3145:1978 BS 3145:1978. Specification for laboratory pH meters
BS 3385:1973 BS 3385:1973. Specification for direct reading pocket type electroscope exposure meters
BS 4314-1:1968 BS 4314-1:1968. Specification for apparatus for physical methods of gas analysis. Infra-red gas analysers for industrial use
BS 5704:1979, IEC 60485:1974 BS 5704:1979, IEC 60485:1974. Method for specifying the performance of digital electronic d.c. voltmeters and d.c. electronic analogue-to-digital convertors
BS 1170:1983 BS 1170:1983. Recommendations for treatment of water for marine boilers
BS 3403:1972 BS 3403:1972. Specification for indicating tachometer and speedometer systems for industrial, railway and marine use
BS 1807:1981 BS 1807:1981. Specification for marine main propulsion gears and similar drives: metric module
BS 3501:1962 BS 3501:1962. Specification for dinghy buoyancy equipment
BS 4263:1967 BS 4263:1967. Specification for the marking of hatchway beams
BS 4268:1967 BS 4268:1967. Specification for the marking of wooden hatchway covers
PD 6430:1969 PD 6430:1969. The adoption of the metric system in the marine industry: report, basic programme and guide
PD 6430/1:1970 PD 6430/1:1970. Extract (appendices A and B) from PD 6430: ‘The adoption of the metric system in the marine industry: report, basic programme and guide. Units of the SI, their application and use in the marine industry
BS EN 26595:1993, BS 6068-2.1:1983,ISO 6595-1985 BS EN 26595:1993, BS 6068-2.1:1983,ISO 6595-1985. Water quality. Determination of total arsenic. Silver diethyldithiocarbamate spectrophotometric method
BS 6068-2.2:1983, ISO 6332-1982 BS 6068-2.2:1983, ISO 6332-1982. Water quality. Physical, chemical and biochemical methods. Determination of iron: 1,10-phenanthroline photometric method
BS EN 25813:1993, BS 6068-2.3:1993,ISO 5813-1983 BS EN 25813:1993, BS 6068-2.3:1993,ISO 5813-1983. Water quality. Determination of dissolved oxygen. Iodometric method
BS 6068:Part 2:Section 2.4:1984, ISO 5666/1-1983 BS 6068:Part 2:Section 2.4:1984, ISO 5666/1-1983. Water quality. Physical, chemical and biochemical methods. Determination of total mercury by flameless atomic absorption spectrometry: method after digestion with permanganate-peroxodisulphate
BS 6068:Part 2:Section 2.5:1984, ISO 5666/2-1983 BS 6068:Part 2:Section 2.5:1984, ISO 5666/2-1983. Water quality. Physical, chemical and biochemical methods. Determination of total mercury by flameless atomic absorption spectrometry: method after pretreatment with ultraviolet radiation
BS 6068:Part 2:Section 2.6:1984, ISO 5666/3-1984 BS 6068:Part 2:Section 2.6:1984, ISO 5666/3-1984. Water quality. Physical, chemical and biochemical methods. Determination of total mercury by flameless atomic absorption spectrometry: method after digestion with bromine
BS 6068-2.7:1984, ISO 5664-1984 BS 6068-2.7:1984, ISO 5664-1984. Water quality. Physical, chemical and biochemical methods. Determination of ammonium: distillation and titration method
BS 6068-2.8:1984, ISO 6058-1984 BS 6068-2.8:1984, ISO 6058-1984. Water quality. Physical, chemical and biochemical methods. Determination of calcium content: EDTA titrimetric method
BS 6068-2.9:1984, ISO 6059-1984 BS 6068-2.9:1984, ISO 6059-1984. Water quality. Physical, chemical and biochemical methods. Determination of the sum of calcium and magnesium: EDTA titrimetric method
BS 6068-2.10:1984, ISO 6778-1984 BS 6068-2.10:1984, ISO 6778-1984. Water quality. Physical, chemical and biochemical methods. Determination of ammonium: potentiometric method
BS 6068-2.11:1984, ISO 7150-1:1984 BS 6068-2.11:1984, ISO 7150-1:1984. Water quality. Physical, chemical and biochemical methods. Determination of ammonium: manual spectrometric method
BS EN 25667-1:1994, BS 6068-6.1:1981,ISO 5667-1:1980 BS EN 25667-1:1994, BS 6068-6.1:1981,ISO 5667-1:1980. Water quality. Sampling. Guidance on the design of sampling programmes
BS 6075-0:1981 BS 6075-0:1981. Methods of sampling and test for sodium hydroxide for industrial use. General introduction
BS 6075-1:1981, ISO 979-1974 BS 6075-1:1981, ISO 979-1974. Methods of sampling and test for sodium hydroxide for industrial use. Determination of sodium hydroxide content
BS 6075-2:1981, ISO 981-1973 BS 6075-2:1981, ISO 981-1973. Methods of sampling and test for sodium hydroxide for industrial use. Determination of chloride content (mercurimetric method)
BS 6075-3:1981, ISO 983-1974 BS 6075-3:1981, ISO 983-1974. Methods of sampling and test for sodium hydroxide for industrial use. Determination of iron content
BS 6075-4:1981, ISO 984-1974 BS 6075-4:1981, ISO 984-1974. Methods of sampling and test for sodium hydroxide for industrial use. Determination of silica content
BS 6075-5:1981, ISO 3195-1975 BS 6075-5:1981, ISO 3195-1975. Methods of sampling and test for sodium hydroxide for industrial use. Sampling and preparation of main test solution
BS 6075-6:1981, ISO 3196-1975 BS 6075-6:1981, ISO 3196-1975. Methods of sampling and test for sodium hydroxide for industrial use. Determination of carbonate content
BS 6075-7:1981, ISO 3197-1975 BS 6075-7:1981, ISO 3197-1975. Methods of sampling and test for sodium hydroxide for industrial use. Determination of chloride content (photometric method)
BS 6075-8:1981, ISO 3198-1975 BS 6075-8:1981, ISO 3198-1975. Methods of sampling and test for sodium hydroxide for industrial use. Determination of sulphate content
BS 6075-9:1981, ISO 3697-1976 BS 6075-9:1981, ISO 3697-1976. Methods of sampling and test for sodium hydroxide for industrial use. Determination of calcium and magnesium contents
BS 6075-10:1981, ISO 5992-1979 BS 6075-10:1981, ISO 5992-1979. Methods of sampling and test for sodium hydroxide for industrial use. Determination of mercury content (photometric method)
BS 6075-11:1981, ISO 5993-1979 BS 6075-11:1981, ISO 5993-1979. Methods of sampling and test for sodium hydroxide for industrial use. Determination of mercury content (flameless atomic absorption method)
BS 6075-12:1981 BS 6075-12:1981. Methods of sampling and test for sodium hydroxide for industrial use. Determination of copper content
BS 6075-14:1981 BS 6075-14:1981. Methods of sampling and test for sodium hydroxide for industrial use. Determination of matter insoluble in water
BS 6092-0:1981 BS 6092-0:1981. Methods of sampling and test for sodium and potassium silicates for industrial use. General introduction
BS 6092-1:1981, ISO 1687-1976 BS 6092-1:1981, ISO 1687-1976. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of solution density at 20°C
BS 6092-2:1981, ISO 1688-1976 BS 6092-2:1981, ISO 1688-1976. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of total solids content
BS 6092-3:1981, ISO 1690-1976 BS 6092-3:1981, ISO 1690-1976. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of silica content (gravimetric method)
BS 6092-4:1981, ISO 1691-1976 BS 6092-4:1981, ISO 1691-1976. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of carbonate content
BS 6092-5:1981, ISO 1692-1976 BS 6092-5:1981, ISO 1692-1976. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of total alkali content
BS 6092-6:1981, ISO 2122-1972 BS 6092-6:1981, ISO 2122-1972. Methods of sampling and test for sodium and potassium silicates for industrial use. Preparation of solutions of not readily soluble products and determination of matter insoluble in water
BS 6092-7:1981, ISO 2124-1972 BS 6092-7:1981, ISO 2124-1972. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of silica content (titrimetric method)
BS 6092-8:1981, ISO 3200-1975 BS 6092-8:1981, ISO 3200-1975. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of sulphate content
BS 6092-9:1981, ISO 3201-1975 BS 6092-9:1981, ISO 3201-1975. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of iron content
BS 6092-10:1981 BS 6092-10:1981. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of matter insoluble in water
BS 6092-11:1981 BS 6092-11:1981. Methods of sampling and test for sodium and potassium silicates for industrial use. Determination of chloride content of sodium metasilicate
BS 6092-12:1981 BS 6092-12:1981. Methods of sampling and test for sodium and potassium silicates for industrial use. Limit test for sulphate content of sodium metasilicate
BS 6337-1:1983, ISO 6228-1980 BS 6337-1:1983, ISO 6228-1980. General methods of chemical analysis. Method for determination of traces of sulphur compounds by reduction and titrimetry
BS 6337-2:1983, ISO 6382-1981 BS 6337-2:1983, ISO 6382-1981. General methods of chemical analysis. Method for determination of silicon content (reduced molybdosilicate spectrophotometric method)
BS 6337-3:1983, ISO 6685-1982 BS 6337-3:1983, ISO 6685-1982. General methods of chemical analysis. Method for determination of iron content (1,10-phenanthroline spectrophotometric method)
BS 6337-4:1984, ISO 6227-1982 BS 6337-4:1984, ISO 6227-1982. General methods of chemical analysis. Method for determination of chloride ions by potentiometry
BS 2511:1970 BS 2511:1970. Methods for the determination of water (Karl Fischer method)
BS 5610:1978, ISO 4319-1977 BS 5610:1978, ISO 4319-1977. Surface active agents – detergents for washing fabrics – guide for comparative testing of performance
BS 2977:1958 BS 2977:1958. Domestic lighting appliances for use with liquefied petroleum gases
BS 3929:1965 BS 3929:1965. Specification for domestic solid fuel ignition pokers and portable undergrate ignition burners for use with commercial butane
BS 6237:1982, ISO 6386-1981 BS 6237:1982, ISO 6386-1981. Method for grading and visual classification for muscovite mica splittings
BS 3282:1969 BS 3282:1969. Glossary of terms relating to gas chromatography
BS 4642:1970 BS 4642:1970. Glossary of industrial furnace terms
BS 5494:1978 BS 5494:1978. Specification for gas taps for domestic and catering appliances
BS 6047-1:1981 BS 6047-1:1981. Flame supervision devices for domestic, commercial and catering gas appliances. Specification for heat sensitive type
BS 6067:1981 BS 6067:1981. Specification for multifunctional gas controls for domestic, commercial and catering appliances
BS MA 2-2:1969 BS MA 2-2:1969. Magnetic compasses and binnacles. Class B instruments
BS MA 2-3:1969 BS MA 2-3:1969. Magnetic compasses and binnacles. Recommendations for the positioning of compasses
BS MA 5:1970 BS MA 5:1970. Specification for brass service nameplates for valves
BS MA 6:1970 BS MA 6:1970. Specification for internal doors and frames
BS MA 7:1983 BS MA 7:1983. Specification for manholes with bolted covers
BS MA 8:1983 BS MA 8:1983. Specification for small weathertight hatches
BS MA 9:1970 BS MA 9:1970. Flanges, bolting and gaskets for exhaust gas, piping for diesel engines and boiler uptakes
BS MA 10:1971 BS MA 10:1971. Specification for oval eyeplates
BS MA 11:1971 BS MA 11:1971. Specification for horncleats
BS MA 12-1:1983 BS MA 12-1:1983. Specification for welded steel bollards. Vertical type
BS MA 12-2:1983 BS MA 12-2:1983. Specification for welded steel bollards. Cruciform type
BS MA 13:1972 BS MA 13:1972. Recommendations for the co-ordination of dimensions in shipbuilding: glossary of terms
BS MA 14:1972 BS MA 14:1972. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for components and assemblies
BS MA 16:1971 BS MA 16:1971. Specification for inflatable boats (manual or motor propelled)
BS MA 17:1972 BS MA 17:1972. Specification for derrick boom clamp
BS MA 18:1973 BS MA 18:1973. Specification for salt water piping systems in ships
BS MA 19:1973 BS MA 19:1973. Specification for Panama-type fairleads
BS MA 20:1973 BS MA 20:1973. Specification for presentation of ships’ cargo gear particulars
BS MA 21:1973 BS MA 21:1973. Specification for deck-end roller fairleads
BS MA 22:1973 BS MA 22:1973. Specification for cast roller fairleads
BS MA 23:1973 BS MA 23:1973. Specification for multi-angle roller fairleads
BS MA 24:1974 BS MA 24:1974. Specification for ships’s side scuttles
BS MA 26:1973 BS MA 26:1973. Specification for suction strainers
BS MA 27:1974 BS MA 27:1974. Specification for sight-flow indicators for tank overflow systems
BS MA 28:1973 BS MA 28:1973. Specification for dimensions of tracks for mast and deck fittings
BS MA 30:1973 BS MA 30:1973. Glossary of terms and graphical symbols for ships’ deck machinery
BS MA 31:1973 BS MA 31:1973. Specification for ships’ deck machinery – cargo winches
BS MA 33:1973 BS MA 33:1973. Specification for ships’ deck machinery – warping winches
BS MA 34:1973 BS MA 34:1973. Specification for ships’ deck machinery – capstans
BS MA 35:1975 BS MA 35:1975. Specification for ships’ deck machinery – windlasses
BS MA 36:1974 BS MA 36:1974. Specification for ships’ deck machinery – topping winches
BS MA 37:1973 BS MA 37:1973. Specification for external doors (wood) for ships
BS MA 38:1973 BS MA 38:1973. Specification for weathertight and spraytight doors (steel)
BS MA 39-1:1973 BS MA 39-1:1973. Specification for ships’ ladders. Ladders, steel vertical
BS MA 39-2:1973 BS MA 39-2:1973. Specification for ships’ ladders. Ladders, steel sloping
BS MA 39-3:1973 BS MA 39-3:1973. Specification for ships’ ladders. Ladders, steel dog-step
BS MA 40-1:1975 BS MA 40-1:1975. Specification for marine guardrails, stanchions, etc. Guardrails for merchant ships (excluding passenger ships)
BS MA 40-2:1975 BS MA 40-2:1975. Specification for marine guardrails, stanchions, etc. Gates and portable guardrail sections for merchant ships (excluding passenger ships)
BS MA 40-3:1975 BS MA 40-3:1975. Specification for marine guardrails, stanchions, etc. Storm rails (exterior)
BS MA 41:1975 BS MA 41:1975. Specification for two tonne general purpose davits
BS MA 42:1975 BS MA 42:1975. Specification for ships’ awnings and supports
BS MA 44:1974 BS MA 44:1974. Recommendations for the co-ordination of dimensions in shipbuilding: principles of dimensional co-ordination
BS MA 45:1974 BS MA 45:1974. Recommendations for the co-ordination of dimensions in shipbuilding: controlling dimensions
BS MA 46:1973 BS MA 46:1973. Specification for cast iron mudboxes
BS MA 47:1977 BS MA 47:1977. Code of practice for ships’ cargo blocks
BS MA 48:1976 BS MA 48:1976. Code of practice for design and operation of ships’ derrick rigs
BS 2A 230:1974 BS 2A 230:1974. Specification for 100° countersunk head steel bolts [1100 MPa with Hi-torque speed drive recesses]
BS A 232:1968 BS A 232:1968. Specification for 100° countersunk head steel bolts (160 000 lbf/in2 (110 hbar) with Torq-set recesses)
BS A 233-236:1971 BS A 233-236:1971. Specification for plain hexagonal thin nut (of Class 3B UNJ thread)
BS A 237-240:1971 BS A 237-240:1971. Specification for plain hexagonal nut (of Class 3B UNJ thread)
BS A 241:1973 BS A 241:1973. General requirements for steel protruding-head bolts of tensile strength 1250 MPa (180000 lbf/in2) or greater
BS A 242; A 243; A 244; A 245:1974 BS A 242; A 243; A 244; A 245:1974. Specification for hexagonal castle nuts (of Class 3B UNJ thread)
BS A 246; A 247; A 248; A 249:1974 BS A 246; A 247; A 248; A 249:1974. Specification for slotted hexagonal thick nuts (of Class 3B UNJ thread)
BS A 250; A 251; A 252; A 253:1974 BS A 250; A 251; A 252; A 253:1974. Specification for slotted hexagonal shear nuts (of Class 3B UNJ thread)
BS A 254; A 255 [...]:1976 BS A 254; A 255 [...]:1976. Specification. Hexagonal head titanium alloy bolts 160 000 lbf/in2 (1100 MPa)
BS A 260; A 261 [...]:1976 BS A 260; A 261 [...]:1976. Specification for metric screws
BS A 266; A 267 [...]:1977 BS A 266; A 267 [...]:1977. Specification for 100° countersunk head titanium alloy bolts 160 000 lbf/in2 (1100 MPa) with Hi-torque speed drive recesses
BS A 272:1977 BS A 272:1977. Specification for Hi-torque speed drive recess: dimensions and gauging for countersunk head fasteners
BS A 273:1978 BS A 273:1978. Specification for gauging practice for 100° countersunk head fasteners for flushness control
BS A 274:1981 BS A 274:1981. Specification for procurement of alloy steel bolts, metric, with a minimum tensile strength of 1100 MPa
BS A 275; A 276 [...]:1981 BS A 275; A 276 [...]:1981. Specification for hexagon self-locking nuts with non-metallic locking inserts. Metric series
BS A 281; A 282 [...]:1981 BS A 281; A 282 [...]:1981. Specification for hexagon (thin) self-locking nuts with non-metallic locking inserts. Metric series
BS A 287; A 288 [...]:1982 BS A 287; A 288 [...]:1982. Specification for hexagon socket head cap screws. Metric series
BS A 293:1983 BS A 293:1983. Specification for procurement of self-locking nuts with non-metallic locking element. Metric series
BS A 294:1984, ISO 7403:1983 BS A 294:1984, ISO 7403:1983. Specification for spline drive wrenching configuration. Metric series
BS 2C 2:1973 BS 2C 2:1973. Specification for coupling dimensions for aircraft connections for water of a drinkable quality
BS 2C 4:1973 BS 2C 4:1973. Specification for coupling dimensions for aero-engine refrigerant pressure replenishment connections
BS 2C 5:1976 BS 2C 5:1976. Specification for mating dimensions for liquid oxygen replenishment couplings
BS C 6:1966 BS C 6:1966. Specification for aircraft engine nacelle fire extinguisher doors
BS C 10:1958 BS C 10:1958. Coupling dimensions for aircraft ground air-conditioning connections
BS 2C 12:1980, ISO 43-1976 BS 2C 12:1980, ISO 43-1976. Specification for jacking pads for aircraft
BS C 15:1960 BS C 15:1960. Specification for coupling dimensions for aircraft-to-tractor tow bar connections
BS C 17:1973 BS C 17:1973. Specification for coupling dimensions for low pressure air connections for engine starting
BS C 18:1976 BS C 18:1976. Specification for V-flange couplings for aircraft piping and ducting – metric series
BS 2E 21:1957 BS 2E 21:1957. Pren type electric cables for aircraft
BS 4F 33:1961 BS 4F 33:1961. Specification for flexible cotton rope for aeronautical purposes
BS 6F 34:1984 BS 6F 34:1984. Specification for light and medium duty linen (flax) sewing thread for aerospace purposes
BS 7F 35:1985 BS 7F 35:1985. Specification for braided linen (flax) lacing cord for aerospace purposes
BS 2F 52:1959 BS 2F 52:1959. Flax reinforcement webbing for aeronautical purposes
BS 4F 54:1985 BS 4F 54:1985. Specification for heavy duty linen (flax) sewing thread for aerospace purposes
BS 3F 63:1981 BS 3F 63:1981. Specification for low pressure oxygen hose for aeronautical purposes
BS 2F 66:1982 BS 2F 66:1982. Specification for rubber bonded cork sheets
BS 2F 67:1980 BS 2F 67:1980. Specification for hose for aviation fuel and engine lubricating oil for aeronautical purposes
BS 3F 68:1977 BS 3F 68:1977. Specification for controlled storage of vulcanized rubbers for use in aerospace applications
BS 2F 114:1975 BS 2F 114:1975. Specification for 80 g cotton madapolam fabric
BS 2F 115:1975 BS 2F 115:1975. Specification for 50 g cotton fabric
BS 2F 116:1975 BS 2F 116:1975. Specification for mercerized cotton parachute fabric
BS F 125:1973 BS F 125:1973. Specification for rubber bonded compressed asbestos fibre jointing
BS MA 52:1974 BS MA 52:1974. Specification for ships’ deck machinery – accommodation ladder winches
BS MA 53:1975 BS MA 53:1975. Specification for ships’ deck machinery – towing winches for deep sea use
BS MA 54:1975 BS MA 54:1975. Specification for ships’ deck machinery – trawl winches
BS MA 55:1975 BS MA 55:1975. Specification for ships’ deck machinery – lifeboat winches
BS MA 56:1974 BS MA 56:1974. Specification for ships’ deck machinery – anchor cable stoppers
BS MA 57:1975 BS MA 57:1975. Specification for ships’ deck machinery – rope storage reels
BS MA 59:1974 BS MA 59:1974. Specification for sea tubes
BS MA 61:1974 BS MA 61:1974. Specification for bilge drain and suction hats
BS MA 62:1974 BS MA 62:1974. Specification for weed grids for sea inlets
BS MA 69:1976 BS MA 69:1976. Specification. Ventilator heads
BS MA 70-1:1975 BS MA 70-1:1975. Specification for dimensions of anchor chain cables. Stud-link anchor chain cables
BS MA 71:1977 BS MA 71:1977. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for internal subdivision
BS MA 72:1976 BS MA 72:1976. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating spaces for furniture
BS MA 73:1976 BS MA 73:1976. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for fixtures, fittings and equipment
BS MA 74-2:1981 BS MA 74-2:1981. Tapers and other outboard details of propeller shafts. Specification for shafts of diameter greater than 160 mm up to 1000 mm
BS MA 75-2:1978 BS MA 75-2:1978. Specification for bulkhead pieces and tank pads. Bulkhead pieces of ductile iron (spheroidal graphite iron)
BS MA 77:1976 BS MA 77:1976. Recommendations for the co-ordination of dimensions in shipbuilding: co-ordinating sizes for services
BS MA 78:1978 BS MA 78:1978. Specification for aluminium shore gangways
BS MA 79:1978 BS MA 79:1978. Specification for jib cranes: ship mounted type
BS MA 81:1980 BS MA 81:1980. Specification for ships’ derrick fittings
BS MA 82:1978, ISO 5483-1977 BS MA 82:1978, ISO 5483-1977. Specification for shipbuilding – oil and water drain screws
BS MA 85:1979, ISO 5620-1978 BS MA 85:1979, ISO 5620-1978. Specification for shipbuilding – filling connection for drinking water tanks on ships
BS MA 86:1979, ISO 3715-1978 BS MA 86:1979, ISO 3715-1978. Glossary of terms used in shipbuilding: list of equivalent terms for ship screw propellers
BS MA 87-1:1980, ISO 4175-1979 BS MA 87-1:1980, ISO 4175-1979. Series 1 shipborne barges. Specification for main dimensions
BS MA 87-2:1985, ISO 7221-1984 BS MA 87-2:1985, ISO 7221-1984. Series 1 shipborne barges. Specification for principal technical requirements
BS MA 88:1980, ISO 3434-1975 BS MA 88:1980, ISO 3434-1975. Specification for heated glass panes for ships’ windows
BS MA 89:1980, ISO 5488-1979 BS MA 89:1980, ISO 5488-1979. Specification for accommodation ladders
BS MA 90:1980, ISO 5489:1979 BS MA 90:1980, ISO 5489:1979. Specification for embarkation ladders
BS MA 92:1981, ISO 799-1980 BS MA 92:1981, ISO 799-1980. Specification for pilot ladders
BS MA 93:1981 BS MA 93:1981. Code of practice for structural safety of deck machinery installation
BS MA 94:1981 BS MA 94:1981. Specification for thermal insulation for marine piping systems
BS MA 97:1984, ISO 6812-1983 BS MA 97:1984, ISO 6812-1983. Specification for roll on/roll off ship-to-shore connection: interface between terminals and ships with straight stern/bow ramps
BS 1000:Auxiliaries:1974 BS 1000:Auxiliaries:1974. Universal Decimal Classification. English full edition. Auxiliary signs and subdivisions (except those of place)
BS 1000:Auxiliaries I(e):Part 1:1980 BS 1000:Auxiliaries I(e):Part 1:1980. Universal Decimal Classification. English full edition. Auxiliary table I(e). Common auxiliaries of place (1/2)
BS 1000[0]:1972 BS 1000[0]:1972. Universal Decimal Classification. English full edition. Generalities
BS 1000[1]:1969 BS 1000[1]:1969. Universal Decimal Classification. English full edition. Philosophy (excluding 159.9 Psychology)
BS 1000[2]:1973 BS 1000[2]:1973. Universal Decimal Classification. English full edition. Religion
BS 1000[32]:1971 BS 1000[32]:1971. Universal Decimal Classification. English full edition. Politics
BS 1000[35/354]:1972 BS 1000[35/354]:1972. Universal Decimal Classification. English full edition. Public administration
BS 1000[355/359]:1971 BS 1000[355/359]:1971. Universal Decimal Classification. English full edition. Military art and science. National defence. Armed forces
BS 1000[368]:1971 BS 1000[368]:1971. Universal Decimal Classification. English full edition. Insurance
BS 1000[37]:1975 BS 1000[37]:1975. Universal Decimal Classification. English full edition. Education. Teaching. Training. Leisure
BS 1000[383/389]:1971 BS 1000[383/389]:1971. Universal Decimal Classification. English full edition. Communications. Transport. Metrology. Weights and measures.
BS 1000[39]:1970 BS 1000[39]:1970. Universal Decimal Classification. English full edition. Ethnology. Ethnography
BS 1000[5/50]:1983 BS 1000[5/50]:1983. Universal Decimal Classification. English full edition. Exact sciences in general. Nature study. Conservation. Environmental sciences
BS 1000[51]:1976 BS 1000[51]:1976. Universal Decimal Classification. English full edition. Mathematics
BS 1000[52]:1977 BS 1000[52]:1977. Universal Decimal Classification. English full edition. Astronomy. Astrophysics. Space research. Geodesy
BS 1000[53]:1974 BS 1000[53]:1974. Universal Decimal Classification. English full edition. Physics
BS 1000[54]:1972 BS 1000[54]:1972. Universal Decimal Classification. English full edition. Chemistry. Crystallography. Mineralogy
BS 1000[55]:1982 BS 1000[55]:1982. Universal Decimal Classification. English full edition. Earth sciences. Geology. Geophysics
BS 1000[56]:1981 BS 1000[56]:1981. Universal Decimal Classification. English full edition. Palaeontology
BS 1000[57]:1979 BS 1000[57]:1979. Universal Decimal Classification. English full edition. Biological sciences in general. Virology. Microbiology
BS 1000[59]:1980 BS 1000[59]:1980. Universal Decimal Classification. English full edition. Zoology
BS 1000[621/621.0]:1973 BS 1000[621/621.0]:1973. Universal Decimal Classification. English full edition. Mechanical engineering in general. Nuclear technology
BS 1000[621.1/.22]:1984 BS 1000[621.1/.22]:1984. Universal Decimal Classification. English full edition. Heat engines in general. Steam power. Steam engines. Boilers. Water power. Hydraulic energy
BS 1000[621.4]:1976 BS 1000[621.4]:1976. Universal Decimal Classification. English full edition. Heat engines (other than steam engines)
BS 1000[621.5]:1971 BS 1000[621.5]:1971. Universal Decimal Classification. English full edition. Pneumatic energy, machinery and tools. Refrigeration and liquefaction techniques and plant
BS 1000[621.6]:1973 BS 1000[621.6]:1973. Universal Decimal Classification. English full edition. Fluids handling, storage and distribution plant and equipment
BS 1000[621.7]:1977 BS 1000[621.7]:1977. Universal Decimal Classification. English full edition. Plastic or chipless working, forming and treatment of materials
BS 1000[621.8]:1976 BS 1000[621.8]:1976. Universal Decimal Classification. English full edition. Mechanical power transmission. Machine elements. Gearing. Materials handling. Mechanical attachments, fixings, fasteners. Lubrication
BS 1000[621.9]:1976 BS 1000[621.9]:1976. Universal Decimal Classification. English full edition. Working, machining with chip formation. Cutting, grinding, sheet working etc.
BS 1000[622]:1979 BS 1000[622]:1979. Universal Decimal Classification. English full edition. Mining
BS 1000[623]:1974 BS 1000[623]:1974. Universal Decimal Classification. English full edition. Military engineering
BS 1000[624]:1981 BS 1000[624]:1981. Universal Decimal Classification. English full edition. Civil and structural engineering in general
BS 1000[625]:1976 BS 1000[625]:1976. Universal Decimal Classification. English full edition. Civil engineering of land transport. Railway engineering. Highway engineering
BS 1000[626/627]:1977 BS 1000[626/627]:1977. Universal Decimal Classification. English full edition. Hydraulic (water) construction works
BS 1000[629]:1977 BS 1000[629]:1977. Universal Decimal Classification. English full edition. Transport vehicle engineering
BS 3490:1985, ISO 5655-1982 BS 3490:1985, ISO 5655-1982. Specification for sizes, quantity packaging and labelling of film for industrial radiography
BS 3G 100-0:1980 BS 3G 100-0:1980. Specification for general requirements for electrical equipment and indicating instruments for aircraft. Introduction
BS 3G 100-1:1973 BS 3G 100-1:1973. Specification for general requirements for equipment for use in aircraft. Identification and declarations
BS 2G 100-2:1962 BS 2G 100-2:1962. Specification for general requirements for electrical equipment and indicating instruments for aircraft. Environmental and operating conditions
BS 3G 100-2.1:1973 BS 3G 100-2.1:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Construction
BS 3G 100-2.2:1972 BS 3G 100-2.2:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Magnetic influence
BS 3G 100-3:1979 BS 3G 100-3:1979. Specification for general requirements for equipment for use in aircraft. Characteristics of aircraft electrical power supplies
BS 3G 100-2.3.0:1972 BS 3G 100-2.3.0:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Standard test requirements
BS 3G 100-2.3.1:1969 BS 3G 100-2.3.1:1969. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Vibration
BS 3G 100-2.3.2:1970 BS 3G 100-2.3.2:1970. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Temperature-pressure requirements
BS 3G 100-2.3.3:1972 BS 3G 100-2.3.3:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Mould growth
BS 3G 100-2.3.4:1972 BS 3G 100-2.3.4:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Differential pressure requirements
BS 3G 100-2.3.5:1972 BS 3G 100-2.3.5:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Explosion-proofness
BS 3G 100-2.3.6:1972 BS 3G 100-2.3.6:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acceleration requirements
BS 3G 100-2.3.7:1972 BS 3G 100-2.3.7:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Tropical exposure
BS 3G 100-2.3.8:1972 BS 3G 100-2.3.8:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Salt mist
BS 3G 100-2.3.9:1972 BS 3G 100-2.3.9:1972. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Ice formation
BS 3G 100-2.3.10:1974 BS 3G 100-2.3.10:1974. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Impact icing
BS 3G 100-2.3.11:1973 BS 3G 100-2.3.11:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Water-proofness
BS 3G 100-2.3.13:1973 BS 3G 100-2.3.13:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Resistance to fire in designated fire zones
BS 3G 100-2.3.14:1973 BS 3G 100-2.3.14:1973. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Acoustic vibration
BS 3G 100-2.3.15:1978, ISO 2657-1976 BS 3G 100-2.3.15:1978, ISO 2657-1976. Specification for general requirements for equipment for use in aircraft. All equipment. Environmental conditions. Change of temperature
BS 3G 100-4.1:1973 BS 3G 100-4.1:1973. Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general
BS 3G 100-4.1.1:1982, ISO 2678-1977 BS 3G 100-4.1.1:1982, ISO 2678-1977. Specification for general requirements for equipment for use in aircraft. Electrical equipment. Construction and general. Electrical insulation tests
BS 3G 100-4.2:1980 BS 3G 100-4.2:1980. Specification for general requirements for equipment for use in aircraft. Electrical equipment. Electromagnetic interference at radio and audio frequencies
BS G 102:1971 BS G 102:1971. Specification for general requirements for rotating electrical machinery
BS 2G 115:1956 BS 2G 115:1956. Specification for sensitive altimeters for aircraft
BS 2G 117:1975 BS 2G 117:1975. Specification for pressure-driven airspeed indicators
BS 2G 124-1:1966 BS 2G 124-1:1966. Specification for a.c. generators for aircraft. Constant frequency
BS 2G 124-2:1966 BS 2G 124-2:1966. Specification for a.c. generators for aircraft. Variable frequency
BS 2G 127:1967 BS 2G 127:1967. Specification for power and current transformers for use in aircraft electrical power supply systems
BS 2G 132:1981 BS 2G 132:1981. Specification for general requirements for electromagnetically operated contactors for aircraft
BS 2G 134:1970 BS 2G 134:1970. Specification for d.c. generators
BS 2G 135:1967 BS 2G 135:1967. Specification for electrically-heated pitot and pitotstatic pressure heads
BS 2G 143:1965 BS 2G 143:1965. Specification for a.c. and d.c. rotary and linear actuators for aircraft
BS 2G 146:1966 BS 2G 146:1966. Specification for d.c. motors for aircraft
BS 2G 147-1:1966 BS 2G 147-1:1966. Specification for a.c. motors for aircraft. Three-phase constant frequency squirrel-cage induction motors
BS 2G 147-2:1966 BS 2G 147-2:1966. Specification for a.c. motors for aircraft. Three-phase variable frequency squirrel-cage induction motors
BS 3G 148:1981 BS 3G 148:1981. Specification for general purpose platinum temperature sensors for aircraft
BS G 152:1956 BS G 152:1956. Specification for a.c. electrically-operated artificial horizons for aircraft
BS G 154:1958 BS G 154:1958. Screws with captive washers for aircraft
BS G 174:1959 BS G 174:1959. Invertors for secondary electrical supplies for aircraft
BS G 175:1959 BS G 175:1959. Aircraft fuel nozzle grounding plugs and sockets
BS G 176-1:1960 BS G 176-1:1960. Specification for cartridge fuses for aircraft. General requirements
BS G 176-2:1960 BS G 176-2:1960. Specification for cartridge fuses for aircraft. Cartridge fuses and fuse-links (Type A)
BS G 176-3:1961 BS G 176-3:1961. Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type B)
BS G 176-4:1962 BS G 176-4:1962. Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type C)
BS G 176-5:1966 BS G 176-5:1966. Specification for cartridge fuses for aircraft. Cartridge fuse-links (Type D)
BS G 177:1961 BS G 177:1961. Specification for Nyvin type electrical cables for aircraft
BS G 179:Part 1:1962 BS G 179:Part 1:1962. Specification for hand-operated circuit-breakers for aircraft. Single-pole circuit-breakers
BS G 179:Part 2:1966 BS G 179:Part 2:1966. Specification for hand-operated circuit-breakers for aircraft. Three-pole circuit-breakers
BS 2G 180:1974 BS 2G 180:1974. Specification for permanent splicing of aircraft electrical cables
BS 2G 182:1975 BS 2G 182:1975. Specification for pressure-driven machmeters for aircraft
BS G 183:1963 BS G 183:1963. Specification for interconnections in analogue data transmission systems in aircraft
BS G 184 to G 188:1964 BS G 184 to G 188:1964. Specification for aluminium terminal ends and in-line connectors for hexagonal crimping to aircraft aluminium electrical cables
BS G 189:1964 BS G 189:1964. Specification for Tersil type electrical cables for aircraft
BS G 190:1964 BS G 190:1964. Specification for cabin altimeters for aircraft
BS G 192:1965 BS G 192:1965. Specification for Efglas type electric cables with copper conductors for aircraft
BS G 193:1966 BS G 193:1966. Specification for aircraft lampholders
BS G 195:1966 BS G 195:1966. Specification for Minyvin type electric cables for aircraft
BS 2G 196:1971 BS 2G 196:1971. Specification for static invertors
BS 3G 197:1982 BS 3G 197:1982. Specification for stud-type terminal blocks for terminations on aircraft electric cables
BS 2G 198:Part 2:1982 BS 2G 198:Part 2:1982. Sleeves for aircraft electric cables and equipment wires. Specification for slip-on sleeves for identification purposes
BS 2G 199:1984 BS 2G 199:1984. Schedule for tables relating to altitudes, airspeed and Mach numbers for use in aeronautical instrument design and calibration
BS 1016-1:1973 BS 1016-1:1973. Methods for analysis and testing of coal and coke. Total moisture of coal
BS 1016-2:1973 BS 1016-2:1973. Methods for analysis and testing of coal and coke. Total moisture of coke
BS 1016-6:1977 BS 1016-6:1977. Methods for analysis and testing of coal and coke. Ultimate analysis of coal
BS 1016-7:1977 BS 1016-7:1977. Methods for analysis and testing of coal and coke. Ultimate analysis of coke
BS 1016-8:1977 BS 1016-8:1977. Methods for analysis and testing of coal and coke. Chlorine in coal and coke
BS 1016-9:1977 BS 1016-9:1977. Methods for analysis and testing of coal and coke. Phosphorus in coal and coke
BS 1016-10:1977 BS 1016-10:1977. Methods for analysis and testing of coal and coke. Arsenic in coal and coke
BS 1016:Part 11:1977 BS 1016:Part 11:1977. Methods for analysis and testing of coal and coke. Forms of sulphur in coal
BS 1016-14:1963 BS 1016-14:1963. Methods for analysis and testing of coal and coke. Analysis of coal ash and coke ash
BS 1016:Part 17:1979 BS 1016:Part 17:1979. Methods for analysis and testing of coal and coke. Size analysis of coal
BS 1016:Part 18:1981 BS 1016:Part 18:1981. Methods for analysis and testing of coal and coke. Size analysis of coke
BS 1016:Part 20:1981, ISO 5074-1980 BS 1016:Part 20:1981, ISO 5074-1980. Methods for analysis and testing of coal and coke. Determination of Hardgrove grindability index of hard coal
BS 1016-21:1981, ISO 1018:1975 BS 1016-21:1981, ISO 1018:1975. Methods for analysis and testing of coal and coke. Determination of moisture-holding capacity of hard coal
BS 3142-3:1970 BS 3142-3:1970. Specification for manufactured solid smokeless fuels for household use. Specially reactive fuels for all types of domestic open fire
BS 3156:Part 4:1969 BS 3156:Part 4:1969. Analysis of fuel gases. Gas chromatographic analysis
BS 3804:Part 1:1964 BS 3804:Part 1:1964. Methods for the determination of the calorific value of fuel gases. Non-recording methods
BS 4262:1984 BS 4262:1984. Method of specifying the technical quality of coke for use in blast furnaces
BS 4445:1969 BS 4445:1969. Schedule of tests for gasification and reforming plants using hydrocarbon feedstocks
BS 4845-1:1972 BS 4845-1:1972. Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags. Sampling of coke
BS 4845-2:1979 BS 4845-2:1979. Methods for sampling manufactured domestic solid smokeless fuels in small consignments of mass 50 kg to 5000 kg either in bulk or in bags. Sampling of solid smokeless fuels other than coke
BS 6127:Part 1:1981 BS 6127:Part 1:1981. Petrographic analysis of bituminous coal and anthracite. Glossary of terms relating to the petrographic analysis of bituminous coal and anthracite
BS 6127-2:1982 BS 6127-2:1982. Petrographic analysis of bituminous coal and anthracite. Method of preparing coal samples for petrographic analysis
BS 6127:Part 3:1981 BS 6127:Part 3:1981. Petrographic analysis of bituminous coal and anthracite. Method of determining maceral group composition of bituminous coal and anthracite
BS 6127:Part 5:1981 BS 6127:Part 5:1981. Petrographic analysis of bituminous coal and anthracite. Method of determining microscopically the reflectance of vitrinite
BS 2740:1969 BS 2740:1969. Specification for simple smoke alarms and alarm metering devices
BS 2741:1969 BS 2741:1969. Recommendations for the construction of simple smoke viewers
BS 2742:1969 BS 2742:1969. Notes on the use of the Ringelmann and miniature smoke charts
BS 2811:1969 BS 2811:1969. Specification for smoke density indicators and recorders
BS 893:1978 BS 893:1978. Method for the measurement of the concentration of particulate material in ducts carrying gases
BS 3048:1958 BS 3048:1958. Code for the continuous sampling and automatic analysis of flue gases: indicators and recorders
BS 3407:1982 BS 3407:1982. Guide for assessing coke screening plant
BS 4161-1:1967 BS 4161-1:1967. Gas meters. Meters of plate construction up to 1000 cubic feet per hour rating
BS 4161-2:1967 BS 4161-2:1967. Gas meters. Meters of plate construction above 1000 cubic feet (28 cubic metres) per hour rating
BS 4161-4:1970 BS 4161-4:1970. Gas meters. Plate constructed positive displacement diaphragm meters for a pressure of 350 mbar (5 lbf/in2) and up to 170 cubic meters (6000 cubic feet) per hour rating
BS 4161-7:1973 BS 4161-7:1973. Gas meters. Mechanical volume correctors
BS 4878:1973 BS 4878:1973. Specification for large (vee-throated) haulage rope pulleys for mines and quarries
BS 2593:1974 BS 2593:1974. Specification for rotary drill rods and tungsten carbide tipped rotary drill bits
BS 227:1970 BS 227:1970. Specification for H-section steel arches for use in mines
BS 248:1969 BS 248:1969. Specification for light rails and fishplates for use at mines
BS 2969:1980, ISO 610-1979 BS 2969:1980, ISO 610-1979. Specification for high-tensile steel chains (round link) for chain conveyors and coal ploughs
BS 3237:1960 BS 3237:1960. Specification for light and medium rolling stock for mineral haulage in mines
BS 4073:1966 BS 4073:1966. Specification for heavy rolling stock for mineral haulage in mines
BS 4521-1.1:1971 BS 4521-1.1:1971. Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using bull head rails
BS 4521-1.2:1971 BS 4521-1.2:1971. Specification for railway turnouts for private users. Turnouts over which British Railways locomotives operate. Turnouts using flat bottom rail
BS 4521-2:1975 BS 4521-2:1975. Specification for railway turnouts for private users. Light grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 10 tons, using flat bottom rails
BS 4521-3.1:1974 BS 4521-3.1:1974. Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons. Turnouts using bull head rail
BS 4521-3.2:1975 BS 4521-3.2:1975. Specification for railway turnouts for private users. Medium grade turnouts over which British Railways locomotives do not operate, for axle loads not exceeding 25 tons. Turnouts using flat bottom rails
BS 4521-4:1975 BS 4521-4:1975. Specification for railway turnouts for private users. Heavy grade turnouts over which British Railways locomotives do not operate, for axle loads which may exceed 25 tons, using flat bottom rails
BS 4854:1972 BS 4854:1972. Specification for cars for manriding in mines
BS 4497:1969 BS 4497:1969. Recommendations for the detection and estimation of nitrogenous treating agents in paper
BS 4498:1982, ISO 302:1981 BS 4498:1982, ISO 302:1981. Method for determination of the Kappa number of pulp (degree of delignification)
BS 4499:1984, ISO 692-1982 BS 4499:1984, ISO 692-1982. Method for determination of alkali solubility of pulp
BS 4501:1969 BS 4501:1969. Method for the extraction from pulps of materials soluble in dichloromethane
BS EN 20638:1993, ISO 638-1978 BS EN 20638:1993, ISO 638-1978. Method for determination of dry-matter content of pulps
BS 4574:1970 BS 4574:1970. Recommendation for the determination of the ink absorbency of paper and board by use of K & N ink
BS 4588:1970 BS 4588:1970. Methods of test for determining the registration obtained on duplicating machines
BS 4616:1970 BS 4616:1970. Recommendations for the determination of the compressibility of paper and board by the Bendtsen method
BS 4747:Part 1:1980, ISO 801/1-1979 BS 4747:Part 1:1980, ISO 801/1-1979. Methods for determination of saleable mass, in lots, of pulp. Pulp baled in sheet form
BS 4747:Part 2:1980, ISO 801/2-1979 BS 4747:Part 2:1980, ISO 801/2-1979. Methods for determination of saleable mass, in lots, of pulp. Pulps (such as flash-dried) baled in slabs
BS 4896:1973 BS 4896:1973. Method for the determination of ash of pulp
BS 4897-1:1983, ISO 777-1982 BS 4897-1:1983, ISO 777-1982. Trace metal contents of pulps. Method for determination of calcium content by edta titrimetric and flame atomic absorption spectrometric methods
BS 5477:1977 BS 5477:1977. Method for visual assessment, by grid assay, of dirt in paper for character recognition
BS 5878:1980, ISO 4119-1978 BS 5878:1980, ISO 4119-1978. Method for determination of stock concentration of pulps (rapid method)
BS 5879:1980, ISO 5635-1978 BS 5879:1980, ISO 5635-1978. Method for measurement of dimensional change of paper after immersion in water
BS 5881:1980, ISO 5638-1978 BS 5881:1980, ISO 5638-1978. Method for determination of grammage of single layers of solid fibreboard
BS 6035-1:1981, ISO 5267/1-1979 BS 6035-1:1981, ISO 5267/1-1979. Methods for determination of the drainability of pulp. Schopper-Riegler method
BS 6035-2:1982, ISO 5267-2:1980 BS 6035-2:1982, ISO 5267-2:1980. Methods for determination of the drainability of pulp. ‘Canadian Standard’ freeness method
BS 6094-1:1981, ISO 5264-1:1979 BS 6094-1:1981, ISO 5264-1:1979. Methods for laboratory beating of pulps. Valley beater method
BS EN 25264-2:1994, ISO 5264-2:1979 BS EN 25264-2:1994, ISO 5264-2:1979. Pulps. Laboratory beating. PFI mill method
BS 6095:1981, ISO 5270-1979 BS 6095:1981, ISO 5270-1979. Methods for determination of the physical properties of laboratory sheets made from pulps
BS EN 27213:1993, ISO 7213:1981 BS EN 27213:1993, ISO 7213:1981. Method for sampling pulps for testing
BS 6306-1:1982, ISO 5351-1:1981 BS 6306-1:1982, ISO 5351-1:1981. Methods for determination of limiting viscosity number of cellulose in dilute solutions. Cupri-ethylene-diamine (CED) method
BS 6306-2:1982, ISO 5351-2:1981 BS 6306-2:1982, ISO 5351-2:1981. Methods for determination of limiting viscosity number of cellulose in dilute solutions. Iron (III) sodium tartrate complex (EWNNmod NaCl) method
BS 2045:1965 BS 2045:1965. Preferred numbers
BS 6000:1972 BS 6000:1972. Guide to the use of BS 6001, sampling procedures and tables for inspection by attributes
BS 5464-1:1977, ISO 1073-1:1976 BS 5464-1:1977, ISO 1073-1:1976. Optical character recognition. Character set OCR-A. Shapes and dimensions of the printed image
BS 5464-2:1977, ISO 1073-2:1976 BS 5464-2:1977, ISO 1073-2:1976. Optical character recognition. Character set OCR-B. Shapes and dimensions of the printed image
BS 5464-3:1983, ISO 2033:1983 BS 5464-3:1983, ISO 2033:1983. Optical character recognition. Method of coding machine readable characters (MICR and OCR) for information processing
BS 5079:1981 BS 5079:1981. Specification for information interchange on 3.81 mm (0.150 in) magnetic tape cassette at 4 cpmm (100 cpi), phase encoded at 63 ftpmm (1600 ftpi)
BS 4850:Part 1:1972 BS 4850:Part 1:1972. Specification for magnetic six-disk packs for data processing. Mechanical and magnetic properties
BS 4850:Part 2:1972 BS 4850:Part 2:1972. Specification for magnetic six-disk packs for data processing. Track format
BS 5356:Part 1:1976 BS 5356:Part 1:1976. Specification for magnetic single-disk cartridges (top loading) for data processing. Mechanical and magnetic properties

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Tags:

Comments are closed.