Sell: DIN Standards (DIN EN) page 6-2 In the Cheapest

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Erection of low-voltage installations – Requirements for special installations or locations – Part 718: Installations for gathering of people DIN VDE 0100-718-2005
Erection of power installations – Part 4: Protection for safety; Chapter 46: Isolation and switching (IEC 60364-4-46:1981, modified); German version HD 384.4.46 S2:2001 DIN VDE 0100-460-2002
Erection of power installations with nominal voltages up to 1000 V – Part 3: Assessment of general characteristics of installations (IEC 60364-3:1993, mod.); German version HD 384.3 S2:1995 DIN VDE 0100-300-1996
Erection of power installations with nominal voltages up to 1000 V; additional protection in the case of direct contact in dwellings be residual current devices with I 30mA in TN systems and TT systems DIN VDE 0100-739-1989
Erection of power installations with nominal voltages up to 1000 V; electrical locations and locked electrical locations DIN VDE 0100-731-1986
Erection of power installations with rated voltages up to 1000 V; caravans, boats and yachts, as well as power supply thereof at camping sites and berths [VDE Specification] DIN 57100-721-1984
Ergonomic design of control centres – Part 1: Principles for the design of control centres (ISO 11064-1:2000); German version EN ISO 11064-1:2000 DIN EN ISO 11064-1-2001
Ergonomic design of control centres – Part 6: Environmental requirements for control centres (ISO 11064-6:2005); English version of DIN EN ISO 11064-6 DIN EN ISO 11064-6-2005
Ergonomic design of control centres – Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006) English version of DIN ISO 11064-7:2006-08 DIN EN ISO 11064-7-2006
Ergonomic design of control centres – Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006); German version ISO 11064-7:2006, Corrigenda to DIN EN ISO 11064-7:2006-08 DIN EN ISO 11064-7 Berichtigung 1-2006
Ergonomic design of control rooms; arrangement and layout principles DIN 33414-4-1990
Ergonomic principles related to mental work-load – Part 1: General terms and definitions (ISO 10075:1991); German version EN ISO 10075-1:2000 DIN EN ISO 10075-1-2000
Ergonomic principles related to mental workload – Part 2: Design principles (ISO 10075-2:1996); German version EN ISO 10075-2:2000 DIN EN ISO 10075-2-2000
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 1: General introduction (ISO 9241-1:1997) (including Amendment AMD 1:2001); German version EN ISO 9241-1:1997 + A1:2001 DIN EN ISO 9241-1-2002
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 11: Guidance on usability (ISO 9241-11:1998); German version EN ISO 9241-11:1998 DIN EN ISO 9241-11-1999
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 14: Menu dialogues (ISO 9241-14:1997); German version EN ISO 9241-14:1999 DIN EN ISO 9241-14-2000
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 15: Command dialogues (ISO 9241-15:1997); German version EN ISO 9241-15:1997 DIN EN ISO 9241-15-1999
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 16: Direct-manipulation dialogues (ISO 9241-16:1999); German version EN ISO 9241-16:1999 DIN EN ISO 9241-16-2000
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 6: Guidance on the work environment (ISO 9241-6:1999); German version EN ISO 9241-6:1999 DIN EN ISO 9241-6-2001
Ergonomic requirements for office work with visual display terminals (VDTs) – Part 7: Requirements for display with reflections (ISO 9241-7:1998); German version EN ISO 9241-7:1998 DIN EN ISO 9241-7-1998
Ergonomic requirements for office work with visual display terminals (VDTs); part 2: guidance on task requirements (ISO 9241-2:1992); German version EN 29241-2:1993 DIN EN 29241-2-1993
Ergonomic requirements for office work with visual display terminals (VDTs); part 3: visual display requirements (ISO 9241-3:1992); German version EN 29241-3:1993 DIN EN 29241-3-1993
Ergonomic requirements for work with visual display based on flat panels – Part 1: Introduction (ISO 13406-1:1999); German version EN ISO 13406-1:1999 DIN EN ISO 13406-1-2000
Ergonomics – Assessment of speech communication (ISO 9921:2003); German version EN ISO 9921:2003 DIN EN ISO 9921-2004
Ergonomics – Construction and application of tests for speech technology; German version ISO/TR 19358:2002 DIN-Fachbericht ISO/TR 19358-2007
Ergonomics – Evaluation of thermal strain by physiological measurements (ISO 9886:2004); German version EN ISO 9886:2004 DIN EN ISO 9886-2004
Ergonomics – Human body dimensions – Part 2: Values DIN 33402-2-2005
Ergonomics – Human body dimensions – Part 2: Values, Corrigenda to DIN 33402-2:2005-12 DIN 33402-2 Berichtigung 1-2007
Ergonomics of human-system interaction – Part 400: Principles and requirements for physical input devices (ISO 9241-400:2007); English version of DIN EN ISO 9241-400:2007-05 DIN EN ISO 9241-400-2007
Ergonomics of the thermal environment – Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004); German version EN ISO 7933:2004 DIN EN ISO 7933-2004
Ergonomics of the thermal environment – Estimation of thermal insulation and water vapour resistance of a clothing ensemble (ISO 9920:2007); English version of DIN EN ISO 9920:2007-10 DIN EN ISO 9920-2007
Ergonomics of the thermal environment – Evaluation of thermal environments in vehicles – Part 3: Evaluation of thermal comfort using human subjects (ISO 14505-3:2006) English version of DIN EN ISO 14505-3:2006-09 DIN EN ISO 14505-3-2006
Ergonomics of the thermal environment – Medical supervision of individuals exposed to extreme hot or cold environments (ISO 12894:2001); German version EN ISO 12894:2001 DIN EN ISO 12894-2002
Establishment of indexes; terms, formal presentation of printed indexes DIN 31630-1-1988
Ethanol as a blending component for petrol – Determination of copper content – Graphite furnace atomic absorption spectrometric method; English version of DIN EN 15488:2007-11 DIN EN 15488-2007
Ethanol as a blending component for petrol – Determination of inorganic chloride – Potentiometric method; English version of DIN EN 15484:2007-11 DIN EN 15484-2007
Ethanol as a blending component for petrol – Determination of pHe; English version of DIN EN 15490:2007-11 DIN EN 15490-2007
Ethanol as a blending component for petrol – Determination of phosphorus content – Ammonium molybdate spectrometric method; English version of DIN EN 15487:2007-11 DIN EN 15487-2007
Eurocode 1 – Actions on structures – Part 1-3: General actions – Snow loads; German version EN 1991-1-3:2003 DIN EN 1991-1-3-2004
Eurocode 1: Actions on structures – Part 1-7: General actions – Accidental actions; English version of DIN EN 1991-1-7:2007-02 DIN EN 1991-1-7-2007
Eurocode 1: Actions on structures – Part 3: Actions induced by cranes and machinery; English version of DIN EN 1991-3:2007-03 DIN EN 1991-3-2007
Eurocode 2: Design of concrete structures – Part 1-1: General rules and rules for buildings; English version of DIN EN 1992-1-1 DIN EN 1992-1-1-2005
Eurocode 2: Design of concrete structures – Part 1-2: General rules – Structural fire design; English version of DIN EN 1992-1-2:2006-10 DIN EN 1992-1-2-2006
Eurocode 3: Design of steel structures – Part 1-1: General rules and rules for buildings; German version EN 1993-1-1:2005, Corrigenda to DIN EN 1993-1-1:2005-07; German version EN 1993-1-1:2005/AC:2006 DIN EN 1993-1-1 Berichtigung 1-2006
Eurocode 3: Design of steel structures – Part 1-10: Material toughness and through-thickness properties; German version EN 1993-1-10:2005, Corrigenda to DIN EN 1993-1-10:2005-07; German version EN 1993-1-10:2005/AC:2005 DIN EN 1993-1-10 Berichtigung 1-2006
Eurocode 3: Design of steel structures – Part 1-12: Additional rules for the extension of EN 1993 up to steel grades S700; English version of DIN EN 1993-1-12:2007-07 DIN EN 1993-1-12-2007
Eurocode 3: Design of steel structures – Part 1-2: General rules – Structural fire design(includes Corrigendum AC:2005); English version of DIN EN 1993-1-2:2006-10 DIN EN 1993-1-2-2006
Eurocode 3: Design of steel structures – Part 1-6: Strength and stability of shell structures;English version of DIN EN 1993-1-6:2007-07 DIN EN 1993-1-6-2007
Eurocode 3: Design of steel structures – Part 1-7: Plated structures subject to out of plane loading; English version of DIN EN 1993-1-7:2007-07 DIN EN 1993-1-7-2007
Eurocode 3: Design of steel structures – Part 1-8: Design of joints; German Version EN 1993-1-8;2005 DIN EN 1993-1-8-2005
Eurocode 3: Design of steel structures – Part 1-9: Fatigue; German version EN 1993-1-9:2005 DIN EN 1993-1-9-2005
Eurocode 3: Design of steel structures – Part 3-1: Towers, masts and chimneys – Towers and masts; English version of DIN EN 1993-3-1:2007-02 DIN EN 1993-3-1-2007
Eurocode 3: Design of steel structures – Part 3-2: Towers, masts and chimneys – Chimneys; English version of DIN EN 1993-3-2:2007-02 DIN EN 1993-3-2-2007
Eurocode 3: Design of steel structures – Part 4-3: Pipelines; English version of DIN EN 1993-4-3:2007-07 DIN EN 1993-4-3-2007
Eurocode 3: Design of steel structures – Part 5: Piling; English version of DIN EN 1993-5:2007-07 DIN EN 1993-5-2007
Eurocode 3: Design of steel structures – Part 6: Crane supporting structures; English version of DIN EN 1993-6:2007-07 DIN EN 1993-6-2007
Eurocode 6: Design of masonry structures – Part 1-2: General rules – Structural fire design; English version of DIN EN 1996-1-2:2006-10 DIN EN 1996-1-2-2006
Eurocode 6: Design of masonry structures – Part 3: Simplified calculation methods for unreinforced masonry structures; English version of DIN EN 1996-3:2006-04 DIN EN 1996-3-2006
Eurocode 7: Geotechnical design – Part 2: Ground investigation and testing; German version EN 1997-2:2007 DIN EN 1997-2-2007
Eurocode 8: Design of structures for earthquake resistance – Part 1: General rules, seismic actions and rules for buildings; English version of DIN EN 1998-1:2006-04 DIN EN 1998-1-2006
Eurocode 8: Design of structures for earthquake resistance – Part 2: Bridges; English version of DIN EN 1998-2:2006-06 DIN EN 1998-2-2006
Eurocode 8: Design of structures for earthquake resistance – Part 3: Assessment and retrofitting of buildings;English version of DIN EN 1998-3:2006-04 DIN EN 1998-3-2006
Eurocode 8: Design of structures for earthquake resistance – Part 4: Silos, tanks and pipelines; English version of DIN EN 1998-4:2007-01 DIN EN 1998-4-2007
European Call Centre Standards for training and qualification – Customer contact representative competences (English Version CWA 14087:2000) DIN CWA 14087-2001
European digital cellular telecommunications system – Half rate speech – Part 1: Half rate speech processing functions; English version ETS 300581-1:1995 DIN ETS 300581-1-1996
European digital cellular telecommunications system – Half rate speech – Part 5: Discontinuous transmission (DTX) for half rate speech traffic channels; English version ETS 300581-5:1995 DIN ETS 300581-5-1996
European digital cellular telecommunications system (phase 1) – Mobile station conformance test system – System simulator specification; English version I-ETS 300020-2:1992/A1:1995 DIN V I-ETS 300020-2/A1-1996
European digital cellular telecommunications system (Phase 1) – Radio transmission and reception – Part 1: Generic; English version I-ETS 300033-1:1994 DIN V I-ETS 300033-1-1994
European digital cellular telecommunications system (Phase 1) – Radio transmission and reception – Part 2: DCS extension; English version I-ETS 300033-2:1994 DIN V I-ETS 300033-2-1994
European digital cellular telecommunications system (Phase 1) – Radio transmission and reception – Part 2: DCS extension; English version I-ETS 300033-2:1994/A1:1994 DIN V I-ETS 300033-2/A1-1994
European digital cellular telecommunications system (Phase 1) – Terminal adaptation functions for services using asynchronous bearer capabilities; English version I-ETS 300042:1994 DIN V I-ETS 300042-1994
European digital cellular telecommunications system (phase 1); channel coding; english version I-ETS 300031:1992 DIN V I-ETS 300031-1993
European digital cellular telecommunications system (phase 1); comfort noise aspects for full-rate speech traffic channels; english version I-ETS 300038:1992 DIN V I-ETS 300038-1993
European digital cellular telecommunications system (phase 1); mobile application part specification; part 2: DCS extension; English version I-ETS 300044-2:1993 DIN V I-ETS 300044-2-1994
European digital cellular telecommunications system (phase 1); MS-BSS layer 1; general requirements; english version I-ETS 300078:1992 DIN V I-ETS 300078-1993
European digital cellular telecommunications system (phase 1); multiplexing and multiple access on the radio path; english version I-ETS 300030:1992 DIN V I-ETS 300030-1993
European digital cellular telecommunications system (phase 1); technical realisation of facsimile group 3; non-transparent; English version I-ETS 300071:1993 DIN V I-ETS 300071-1994
European digital cellular telecommunications system (phase 1); voice activity detection; english version I-ETS 300040:1992 DIN V I-ETS 300040-1993
European digital cellular telecommunications system (Phase 2) – Application of the Base Station System Application Part (BSSAP) on the E-interface; English version ETS 300626:1995 DIN ETS 300626-1996
European digital cellular telecommunications system (Phase 2) – Call Barring (CB) supplementary services – Stage 2; English version ETS 300548:1995 DIN ETS 300548-1995
European digital cellular telecommunications system (Phase 2) – Call Waiting (CW) and Call Hold (HOLD) supplementary services – Stage 2; English version ETS 300544:1995 DIN ETS 300544-1995
European digital cellular telecommunications system (Phase 2) – Data Link (DL) layer – General aspects; English version ETS 300554:1994 DIN ETS 300554-1995
European digital cellular telecommunications system (Phase 2) – GSM Public Land Mobile Network (PLMN) connection types; English version ETS 300528:1994 DIN ETS 300528-1995
European digital cellular telecommunications system (Phase 2) – In-band control of remote transcoders and rate adaptors for half rate traffic channels; English version ETS 300598:1995 DIN ETS 300598-1996
European digital cellular telecommunications system (Phase 2) – Interworking between the Public Land Mobile Network (PLMN) and a Packet Switched Public Data Network/Integrated Services Digital Network (PSPDN/ISDN) for the support of packet switched data transmission services; English version ETS 300603/A1:1995 DIN ETS 300603/A1-1995
European digital cellular telecommunications system (Phase 2) – Interworking between the Public Land Mobile Network (PLMN) and the Packet Switched Public Data Network (PSPDN) for Packet Assembly/Disassembly (PAD) facility access; English version ETS 300602:1994 DIN ETS 300602-1995
European digital cellular telecommunications system (Phase 2) – Location registration procedures; English version ETS 300530:1994 DIN ETS 300530-1995
European digital cellular telecommunications system (Phase 2) – Man-Machine Interface (MMI) of the Mobile Station (MS); English version ETS 300511:1995 DIN ETS 300511-1995
European digital cellular telecommunications system (phase 2) – Mobile radio interface signalling layer 3, general aspects; English version ETS 300556:1995 DIN ETS 300556-1995
European digital cellular telecommunications system (Phase 2) – Mobile Station – Base Station System (MS-BSS) interface – Channel structures and access capabilities; English version ETS 300552:1994 DIN ETS 300552-1995
European digital cellular telecommunications system (Phase 2) – Mobile Station – Base Station System (MS-BSS) interface – General aspects and principles; English version ETS 300550:1994 DIN ETS 300550-1995
European digital cellular telecommunications system (Phase 2) – Modulation; English version ETS 300576:1994 DIN ETS 300576-1995
European digital cellular telecommunications system (phase 2) – MultiParty (MPTY) supplementary services, stage 3; English version ETS 300568:1995 DIN ETS 300568-1995
European digital cellular telecommunications system (Phase 2) – Network functions; English version ETS 300521:1994 DIN ETS 300521-1995
European digital cellular telecommunications system (Phase 2) – Part 1: Base Station System-Mobile-services Switching Centre (BSS-MSC) interface; general aspects; English version ETS 300587-1:1994 DIN ETS 300587-1-1995
European digital cellular telecommunications system (Phase 2) – Part 4: Comfort noise aspects for full rate speech traffic channels; English version ETS 300580-4:1994 DIN ETS 300580-4-1995
European digital cellular telecommunications system (Phase 2) – Principles of telecommunication services supported by a GSM Public Land Mobile Network (PLMN); English version ETS 300500:1996 DIN ETS 300500-1996
European digital cellular telecommunications system (Phase 2) – Routeing of calls to/from Public Data Networks (PDN); English version ETS 300541:1994 DIN ETS 300541-1995
European digital cellular telecommunications system (Phase 2) – Subscriber Identity Modules (SIM), Functional characteristics; English version ETS 300509:1994 DIN ETS 300509-1995
European digital cellular telecommunications system (Phase 2) – Support of Dual Tone Multi-Frequency signalling (DTMF) via the GSM system; English version ETS 300532:1994 DIN ETS 300532-1995
European digital cellular telecommunications system (Phase 2) – Technical realisation of facsimile group 3 non-transparent; English version ETS 300539:1995 DIN ETS 300539-1995
European digital cellular telecommunications system (phase 2) – Technical realization of facsimile group 3, transparent; English version ETS 300538:1995 DIN ETS 300538-1996
European type roller chains – Part 1: Simple, duplex and triplex roller chains, Corrigenda to DIN 8187-1:1996-03 DIN 8187-1 Berichtigung 1-2006
Evaluation and routine testing in medical imaging departments – Part 2-4: Constancy tests; Hard copy cameras (IEC 61223-2-4:1994); German version EN 61223-2-4:1994 DIN EN 61223-2-4-2003
Evaluation and routine testing in medical imaging departments – Part 3-2: Acceptance tests; Imaging performance of mammographic X-ray equipment (IEC 61223-3-2:1996); German version EN 61223-3-2:1996 DIN EN 61223-3-2-2001
Evaluation and routine testing in medical imaging departments – Part 3-3: Acceptance tests; Imaging performance of X-ray equipment for digital subtraction angiography (IEC 61223-3-3:1996); German version EN 61223-3-3:1996 DIN EN 61223-3-3-2000
Evaluation and routine testing in medical imaging departments – Part 3-5: Acceptance tests – Imaging performance of computed tomography X-ray equipment (IEC 61223-3-5:2004); German version EN 61223-3-5:2004 DIN EN 61223-3-5-2005
Evaluation of human exposure to electromagnetic fields from devices used in Electronic Article Surveillance (EAS), Radio Frequency Identification (RFID) and similar applications; German version EN 50357:2001 DIN EN 50357-2002
Evaluation of still projectors with incandescent lamps; measurement of temperature in the picture area of slides DIN 19021-2-1985
Event-Technology – Sound Engineering – Part 5: Measures to prevent the risk of hearing loss of the audience by high sound exposure of electroacoustic sound systems DIN 15905-5-2007
Excavators, spreaders and auxiliary equipment in opencast lignite mines – Part 2: Calculation principles DIN 22261-2-2006
Excavators, spreaders and auxiliary equipment in opencast lignite mines – Part 5: Slewing brakes and overload protecting devices DIN 22261-5-2007
Execution of ceramic linings by thin mortar bed technique; hydraulic mortar DIN 18157-1-1979
Execution of special geotechnical work – Displacement piles; German version EN 12699:2000 DIN EN 12699-2001
Execution of special geotechnical works – Deep mixing Corrigendum 1 to English version of DIN EN 14679:2005-07 DIN EN 14679 Corrigendum 1-2006
Execution of special geotechnical works – Deep mixing; German version EN 14679:2005, Corrigenda to DIN EN 14679:2005-07; German version EN 14679:2005/AC:2006 DIN EN 14679 Berichtigung 1-2006
Execution of special geotechnical works – Ground anchors; German version EN 1537:1999 + AC:2000 DIN EN 1537-2001
Execution of special geotechnical works – Jet grouting; German version EN 12716:2001 DIN EN 12716-2001
Execution of special geotechnical works – Micropiles; German version EN 14199:2005 DIN EN 14199-2005
Execution of special geotechnical works – Reinforced fill; English version of DIN EN 14475:2006-04 DIN EN 14475-2006
Execution of special geotechnical works – Reinforced fill; German version EN 14475:2006, Corrigenda to DIN EN 14475:2006-04; German version EN 14475:2006/AC:2006 DIN EN 14475 Berichtigung 1-2006
Exhaust gas lines on ships; flanges DIN 86044-1980
Exhaust gas lines on ships; gaskets DIN 86072-1992
Expanded metal DIN 791-1967
Experimental evaluation of the protection from erythema of external sunscreen products for the human skin DIN 67501-1999
Explosion openings 450 450 DIN 2922-1968
Explosion prevention and protection in underground mines – Protective systems – Part 1: 2-bar-explosion proof ventilation structure; German version EN 14591-1:2004 DIN EN 14591-1-2004
Explosion protection systems; part 1: determination of explosion indices of combustible dust in air (ISO 6184-1:1985); german version EN 26184-1:1991 DIN EN 26184-1-1991
Explosion protection systems; part 2: determination of explosion indices of combustible gases in air (ISO 6184-2:1985); german version EN 26184-2:1991 DIN EN 26184-2-1991
Explosion protection systems; part 4 : determination of efficacy of explosion suppression systems (ISO 6184-4:1985); german version EN 26184-4:1991 DIN EN 26184-4-1991
Explosion suppression systems; English version of DIN EN 14373:2006 DIN EN 14373-2006
Explosion venting devices; English version of DIN EN 14797:2007-03 DIN EN 14797-2007
Explosive atmospheres – Part 26: Equipment with equipment protection level (EPL) Ga (IEC 60079-26:2006); German version EN 60079-26:2007 DIN EN 60079-26-2007
Explosives for civil uses – Detonating cords and safety fuses – Part 1: Requirements; German version EN 13630-1:2003 DIN EN 13630-1-2004
Explosives for civil uses – Detonating cords and safety fuses – Part 5: Determination of resistance to abrasion of detonating cords; German version EN 13630-5:2003 DIN EN 13630-5-2004
Explosives for civil uses – Detonating cords and safety fuses – Part 7: Determination of the reliability of initiation of detonating cords; German version EN 13630-7:2002 DIN EN 13630-7-2002
Explosives for civil uses – Detonating cords and safety fuses – Part 9: Determination of transmission of detonation from detonating cord to detonating cord; German version EN 13630-9:2004 DIN EN 13630-9-2004
Explosives for civil uses – Detonation cords and safety fuses – Part 11: Determination of velocity of detonation of detonating cords; German version EN 13630-11:2002 DIN EN 13630-11-2002
Explosives for civil uses – Detonation cords and safety fuses – Part 12: Determination of burning duration of safety fuses; German version EN 13630-12:2002 DIN EN 13630-12-2002
Explosives for civil uses – Detonators and relays – Part 12: Determination of resistance to hydrostatic pressure; German version EN 13763-12:2003 DIN EN 13763-12-2004
Explosives for civil uses – Detonators and relays – Part 15: Determination of equivalent initiating capability; German version EN 13763-15:2004 DIN EN 13763-15-2005
Explosives for civil uses – Detonators and relays – Part 17: Determination of no-fire current of electric detonators; German version EN 13763-17:2003 DIN EN 13763-17-2004
Explosives for civil uses – Detonators and relays – Part 18: Determination of series firing current of electric detonators; German version EN 13763-18:2003 DIN EN 13763-18-2004
Explosives for civil uses – Detonators and relays – Part 19: Determination of firing impulse of electric detonators; German version EN 13763-19:2003 DIN EN 13763-19-2004
Explosives for civil uses – Detonators and relays – Part 20: Determination of total resistance of electric detonators; German version EN 13763-20:2003 DIN EN 13763-20-2004
Explosives for civil uses – Detonators and relays – Part 21: Determination of flash-over voltage of electric detonators; German version EN 13763-21:2003 DIN EN 13763-21-2004
Explosives for civil uses – Detonators and relays – Part 23: Determination of the shock-wave velocity of shock tube; German version EN 13763-23:2002 DIN EN 13763-23-2002
Explosives for civil uses – Detonators and relays – Part 25: Determination of transfer capacity of surface connectors, relays and coupling accessories; German version EN 13763-25:2004 DIN EN 13763-25-2004
Explosives for civil uses – Detonators and relays – Part 26: Definitions, methods and requirements for devices and accessories for reliable and safe function of detonators and relays; German version EN 13763-26:2004 DIN EN 13763-26-2004
Explosives for civil uses – Detonators and relays – Part 4: Determination of resistance to abrasion of leading wires and shock tubes; German version EN 13763-4:2003 DIN EN 13763-4-2004
Explosives for civil uses – Detonators and relays – Part 6: Determination of resistance to cracking at low temperatures of leading wires; German version EN 13763-6:2003 DIN EN 13763-6-2004
Explosives for civil uses – Detonators and relays – Part 7: Determination of the mechanical strength of leading wires, shock tubes, connections, crimps and closures; German version EN 13763-7:2003 DIN EN 13763-7-2004
Explosives for civil uses – Detonators and relays – Part 8: Determination of the resistance to vibration of plain detonators; German version EN 13763-8:2003 DIN EN 13763-8-2004
Explosives for civil uses – Detonators and relays – Part 9: Determination of resistance to bending of detonators; German version EN 13763-9:2003 DIN EN 13763-9-2004
Explosives for civil uses – High explosives – Part 1: Requirements; German version EN 13631-1:2005 DIN EN 13631-1-2005
Explosives for civil uses – High explosives – Part 11: Determination of transmission of detonation; German version EN 13631-11:2003 DIN EN 13631-11-2004
Explosives for civil uses – High explosives – Part 13: Determination of density; German version EN 13631-13:2003 DIN EN 13631-13-2003
Explosives for civil uses – High explosives – Part 14: Determination of velocity of detonation; German version EN 13631-14:2003 DIN EN 13631-14-2003
Explosives for civil uses – High explosives – Part 15: Calculation of thermodynamic properties; German version EN 13631-15:2005 DIN EN 13631-15-2005
Explosives for civil uses – High explosives – Part 2: Determination of thermal stability of explosives; German version EN 13631-2:2002 DIN EN 13631-2-2002
Explosives for civil uses – High explosives – Part 5: Determination of resistance to water; German version EN 13631-5:2002 DIN EN 13631-5-2002
Explosives for civil uses – High explosives – Part 6: Determination of resistance to hydrostatic pressure; German version EN 13631-6:2002 DIN EN 13631-6-2002
Explosives for civil uses – High explosives – Part 7: Determination of safety and reliability at extreme temperatures; German version EN 13631-7:2003 DIN EN 13631-7-2004
Explosives for civil uses – Propellants and rocket propellants – Part 1: Requirements; German version EN 13938-1:2004 DIN EN 13938-1-2005
Explosives for civil uses – Propellants and rocket propellants – Part 3: Determination of deflagration to detonation transition; German version EN 13938-3:2003 DIN EN 13938-3-2003
Expression of performance of electrochemical analyzers – Part 2: pH-value (IEC 60746-2:2003 + Corrigendum 2003); German version EN 60746-2:2003 DIN EN 60746-2-2003
Expression of performance of electrochemical analyzers – Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors (IEC 60746-4:1992) DIN IEC 60746-4-1996
Expression of performance of electrochemical analyzers – Part 5: Oxidation-reduction potential or redox potential (IEC 60746-5:1992) DIN IEC 60746-5-1996
Expression of performance of gas analyzers – Part 6: Photometric analyzers (IEC 61207-6:1994); German version EN 61207-6:1994 DIN EN 61207-6-1995
Expression of performance of sample handling systems for process analyzers (IEC 61115:1992); German version EN 61115:1993 DIN EN 61115-1994
Expression of the properties of cathode-ray oscilloscopes; part 1: general DIN IEC 60351-1-1981
Extenders and pigments for paper and board – Specifications and methods of test – Part 9: Calcined clay DIN 55626-9-2007
Extenders for paints – Specifications and methods of test – Part 12: Muscovite-type mica (ISO 3262-12:2001); German version EN ISO 3262-12:2001 DIN EN ISO 3262-12-2002
Extenders for paints – Specifications and methods of test – Part 17: Precipitated calcium silicate (ISO 3262-17:2000); German version EN ISO 3262-17:2000 DIN EN ISO 3262-17-2000
Extenders for paints – Specifications and methods of test – Part 19: Precipitated silica (ISO 3262-19:2000); German version EN ISO 3262-19:2000 DIN EN ISO 3262-19-2000
Extenders for paints – Specifications and methods of test – Part 2: Barytes (natural barium sulfate) (ISO 3262-2:1998); German version EN ISO 3262-2:1998 DIN EN ISO 3262-2-1998
Extenders for paints – Specifications and methods of test – Part 20: Fumed silica (ISO 3262-20:2000); German version EN ISO 3262-20:2000 DIN EN ISO 3262-20-2000
Extenders for paints – Specifications and methods of test – Part 21: Silica sand (unground natural quartz) (ISO 3262-21:2000); German version EN ISO 3262-21:2000 DIN EN ISO 3262-21-2000
Extenders for paints – Specifications and methods of test – Part 4: Whiting (ISO 3262-4:1998); German version EN ISO 3262-4:1998 DIN EN ISO 3262-4-1998
Extenders for paints – Specifications and methods of test – Part 6: Precipitated calcium carbonate (ISO 3262-6:1998); German version EN ISO 3262-6:1998 DIN EN ISO 3262-6-1998
Extenders for plastics – Part 23: Phlogopite; specifications and methods of test DIN 55625-23-1999
Extenders for plastics – Part 4: Whiting, specifications and methods of test DIN 55625-4-1999
Extenders for plastics – Part 5: Natural crystalline calcium carbonate (NCC), specifications and methods of test DIN 55625-5-1999
Extenders for plastics – Part 7: Dolomite, specifications and methods of test DIN 55625-7-1999
Extensions for Financial Services (XFS) interface specification – Part 11: Vendor Dependent Mode Device Class Interface; programmer’s reference; English version CWA 13449-11:1998 DIN CWA 13449-11-1999
Extensions for Financial Services (XFS) interface specification – Part 12: Camera Device Class Interface; programmer’s reference; English version CWA 13449-12:1998 DIN CWA 13449-12-1999
Extensions for Financial Services (XFS) interface specification – Part 2: Service Classes Definition; programmer’s reference; English version CWA 13449-2:1998 DIN CWA 13449-2-1999
Extensions for Financial Services (XFS) interface specification – Part 6: PIN Keypad Device Class Interface; programmer’s reference; English version CWA 13449-6:1998 DIN CWA 13449-6-1999
Extensions for Financial Services (XFS) interface specification – Part 7: Check Reader/Scanner Device Class Interface; programmer’s reference; English version CWA 13449-7:1998 DIN CWA 13449-7-1999
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 1: Application programming interface (API); Service Provider Interface (SPI); Programmer’s Reference (English version CWA 14050-1:2000) DIN CWA 14050-1-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 12: Camera device class interface (English Version CWA 14050-12:2000) DIN CWA 14050-12-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 13: Alarm device class interface (English Version CWA 14050-13:2000) DIN CWA 14050-13-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 17: Printer device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer’s reference (English Version CWA 14050-17:2000) DIN CWA 14050-17-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 18: Identification card device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer’s reference (English Version CWA 14050-18:2000) DIN CWA 14050-18-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 21: Depository device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer’s reference (English Version CWA 14050-21:2000) DIN CWA 14050-21-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 22: Text terminal unit device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.0 (this CWA); Programmer’s reference (English Version CWA 14050-22:2000) DIN CWA 14050-22-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 8: Depository device class interface (English Version CWA 14050-8:2000) DIN CWA 14050-8-2001
Extensions for Financial Services (XFS) interface specification – Release 3.0 – Part 9: Text terminal unit device class interface (English Version CWA 14050-9:2000) DIN CWA 14050-9-2001
Extensions for Financial Services (XFS) interface specification – Release 3.01 – Part 23: Sensors and indicators unit device class interface; Migration from Version 2.0 (see CWA 13449) to Version 3.01 (this CWA); Programmer’s reference; English version CWA 14050-23:2002 DIN CWA 14050-23-2002
Exterior blinds – Resistance to load due to water accumulation – Test method; German version EN 1933:1998 DIN EN 1933-1999
External cables for telecommunication and data processing systems; cables insulated and sheathed with polyethylen, unit stranded DIN VDE 0816-1-1988
External cables for telecommunication and data processing systems; signal and measuring cables, mining cables DIN VDE 0816-2-1988
External corrosion protection of buried valves; heavy-duty thermoset plastics coatings DIN 30677-2-1988
External introducer cannulae for suprapubic catheter systems for single use – Requirements and testing DIN 13086-2005
Eye and clevis for overhead equipment; connecting dimensions DIN 43160-1968
Eye bolts; metric thread DIN 81698-1973
Eye dimensions of hammers and forging tools DIN 1195-2007
Eye hooks, grade 5 DIN 7540-1980
Eyebolts DIN 444-1983
Eye-fittings for cable for controls DIN 71992-1982
Eyeletts for cardboard labels DIN 7333-1962
Eyes for straps and belts DIN 5293-1972
Facade scaffolds made of prefabricated components – Part 1: Products specifications; German version EN 12810-1:2003 DIN EN 12810-1-2004
Face milling cutters for indexable inserts DIN 8030-1-1984
Facility Management – Part 2: Guidance on how to prepare Facility Management agreements; English version of DIN EN 15221-2:2007-01 DIN EN 15221-2-2007
Family specification – Digital integrated HC MOS circuits – Series HC/HCT/HCU; German version EN 190109:1994 DIN EN 190109-1996
Family specification – Digital integrated TTL low power Schottky circuits – Series 54 LS, 64 LS, 74 LS, 84 LS; German version EN 190103:1994 DIN EN 190103-1996
Family specification – TTL advanced Schottky digital integrated circuits – Series 54 AS, 74 AS; German version EN 190108:1994 DIN EN 190108-1996
Family specification: AC MOS digital integrated circuits; German version EN 190116:1993 DIN EN 190116-1995
Fans; performance testing of small fans using standardized test airways DIN 24163-3-1985
Fans; technical delivery conditions DIN 24166-1989
Fasteners – Acceptance inspection (ISO 3269:2000); German version EN ISO 3269:2000 DIN EN ISO 3269-2000
Fasteners – Electroplated coatings (ISO 4042:1999); German version EN ISO 4042:1999 DIN EN ISO 4042-2001
Fasteners – Ends of parts with external metric ISO thread (ISO 4753:1999); German version EN ISO 4753:1999 DIN EN ISO 4753-2000
Fasteners – European Standards – Survey DIN 918 Bb.3-2005
Fasteners – General requirements for bolts, screws, studs and nuts (ISO 8992:2005) DIN ISO 8992-2005
Fasteners – Part 27: Steel screws, bolts and studs with adhesive coating, Technical specifications DIN 267-27-2004
Fasteners – Preloading test for the detection of hydrogen embrittlement – Parallel bearing surface method (ISO 15330:1999); German version EN ISO 15330:1999 DIN EN ISO 15330-2000
Fasteners – Technical specifications – Part 26: Conical spring washers for bolted connections DIN 267-26-2005
Fasteners – Torque/clamp force testing (ISO 16047:2005); English version of DIN EN ISO 16047 DIN EN ISO 16047-2005
Fasteners; clearance holes for bolts and screws (ISO 273:1979); german version EN 20273:1991 DIN EN 20273-1992
Fasteners; product grades for parts for bolted connections for use at temperatures ranging from -200 °C to +700 °C DIN 267-29-1993
Fasteners; surface discontinuities; bolts, screws and studs subject to general requirements (ISO 6157-1:1988); german version EN 26157-1:1991 DIN EN 26157-1-1991
Fasteners; surface discontinuities; bolts, screws and studs subject to special requirements (ISO 6157-3:1988); german version EN 26157-3:1991 DIN EN 26157-3-1991
Fasteners; Width across Flats for Hexagon Products DIN ISO 272-1979
Fastening clamps – Block clamps – Part 1: Light duty (L) DIN 3015-1-1999
Fastening clamps – Block clamps – Part 3: Double clamps (Z) DIN 3015-3-1999
Fastening clamps – Part 1: With tongue DIN 3016-1-2000
Fastening clamps with bracket – Part 1: Type A without insert, type B with insert DIN 86025-1-1997
Fastening clamps; block clamps; technical delivery conditions DIN 3015-10-1994
Fastening of clockworks an dials for electric secundary clocks; mounting dimensions DIN 41079-1974
Fat and oil derivatives – Fatty acid methylesters (FAME) – Determination of iodine value; German version EN 14111:2003 DIN EN 14111-2003
Fat and oil derivatives – Fatty acid methylesters (FAME) – Determination of methanol content; German version EN 14110:2003 DIN EN 14110-2003
Fat and oil derivatives – Fatty acid methylesters (FAME) – Determination of oxidation stability (accelerated oxidation test); German version EN 14112:2003 DIN EN 14112-2003
Fat and oil derivatives – Fatty acid methylesters (FAME) – Determination of phosphorus content by inductively coupled plasma (ICP) emission spectrometry; German version EN 14107:2003 DIN EN 14107-2003
Fatty food – Determination of pesticides and polychlorinated biphenyls (PCBs) – Part 2: Extraction of fat, pesticides and PCBs, and determination of fat content; German version EN 1528-2:1996 DIN EN 1528-2-1997
Fatty food – Determination of pesticides and polychlorinated biphenyls (PCBs) – Part 3: Clean-up methods; German version EN 1528-3:1996 DIN EN 1528-3-1997
Fault tree analysis (FTA) (IEC 61025:2006); German version EN 61025:2007 DIN EN 61025-2007
Feather and down – Methods of testing the down proof properties of fabrics – Part 2: Impact test (includes Amendment A1:2003); German version EN 12132-2:1998 + A1:2003 DIN EN 12132-2-2003
Feather and down – Sampling in view of tests; German version EN 1883:1998 DIN EN 1883-1998
Feather and down – Terms and definitions (includes amendment A1:2003); German version EN 1885:1998 + A1:2003 DIN EN 1885-2004
Feather and down – Test methods – Determination of moisture content; German version EN 1161:1996 DIN EN 1161-1996
Feather and down – Test methods – Determination of the filling power (bulk density); German version EN 12130:1998 DIN EN 12130-1998
Feather and down – Test methods – Determination of the oxygen index number; German version EN 1162:1996 DIN EN 1162-1996
Feather and down – Test methods – Determination of the quantitative composition of feather and down (manual method); German version EN 12131:1998 DIN EN 12131-1998
Feather and down – Test methods – Determination of the turbidity of an aqueous extract; German version EN 1164:1998 DIN EN 1164-1998
Feather and down – Test methods – Determination of water-soluble chlorides; German version EN 1165:1996 DIN EN 1165-1996
Feathers and down – Method of test for measuring the sizes of quilts filled with feather and/or down; German version EN 1167:1996 DIN EN 1167-1996
Felt Rings, Felt Strips, Ring Grooves for Rolling Bearing Housings DIN 5419-1959
Ferrit cores – Guide on the limits of surface irregularities – Part 4: Ring-cores (IEC 60424-4:2001); German version EN 60424-4:2001 DIN EN 60424-4-2001
Ferritc-pearlitic steels for precipitation hardening from hot-working temperatures; German version EN 10267:1998 DIN EN 10267-1998
Ferrite cores – Dimensions – Part 4: RM-cores and associated parts (IEC 62317-4:2005); German version EN 62317-4:2005 DIN EN 62317-4-2006
Ferrite cores – Guide on the limits of surface irregularities – Part 1: General specification (IEC 60424-1:1999); German version EN 60424-1:1999 DIN EN 60424-1-2000
Ferroboron – Technical delivery conditions DIN 17567-2004
Ferromanganese and ferrosilicomanganese; determination of manganese content; potentiometric method (ISO 4159, 1st edition: 1978.12.15); german version EN 24159:1989 DIN EN 24159-1990
Ferronickel; determination of cobalt content; flame atomic absorption spectrometric method (ISO 7520:1985); german version EN 27520:1991 DIN EN 27520-1992
Ferronickel; determination of nickel content; dimethylglyoxime gravimetric method (ISO 6352:1985); german version EN 26352:1991 DIN EN 26352-1992
Ferrosilicon and Silicon – Part 2: Technical delivery conditions for silicon DIN 17560-2-2004
Ferrotitanium – Technical delivery conditions DIN 17566-2004
Ferrotungsten – Technical delivery conditions DIN 17562-2004
Ferrovanadium – Technical delivery conditions DIN 17563-2004
Ferrules for tool handles DIN 396-1968
Fertilizers – Determination of bulk density (tapped) (ISO 5311:1992 modified); German version EN 1237:1995 DIN EN 1237-1995
Fertilizers – Determination of chelating agents in fertilizers by chromatography – Part 2: Determination of Fe chelated by o,o-EDDHA and o,o-EDDHMA by ion pair chromatography English version of DIN EN 13368-2:2007-06 DIN EN 13368-2-2007
Fertilizers – Determination of chelating agents in fertilizers by ion chromatography – Part 1: EDTA, HEDTA and DTPA; German version EN 13368-1:2001 DIN EN 13368-1-2001
Fertilizers – Determination of flow rate; German version EN 13299:2000 DIN EN 13299-2000
Fertilizers – Determination of nitric and ammoniacal nitrogen according to Ulsch; German version CEN/TS 15558:2007 DIN CEN/TS 15558-2007
Fertilizers – Determination of total nitrogen in calcium cyanamide containing nitrates; German version CEN/TS 15561:2007 DIN CEN/TS 15561-2007
Fertilizers – Determination of total nitrogen in calcium cyanamide nitrate free; German version CEN/TS 15560:2007 DIN CEN/TS 15560-2007
Fertilizers – Treatment with a cation exchange resin for the determination of the chelated micro-nutrient content and of the chelated fraction of micro-nutrients; German version EN 13366:2001 DIN EN 13366-2001
Fertilizers and liming materials – Classification; German version EN 13535:2001 DIN EN 13535-2001
Fertilizers and liming materials – Determination of water content – Guidelines and recommendations; German version EN 14787:2005 DIN EN 14787-2005
Fertilizers and liming materials – Sampling and sample preparation – Part 2: Sample preparation English version of DIN EN 1482-2:2007-04 DIN EN 1482-2-2007
Fertilizers and liming materials – Vocabulary – Part 1: General terms (including corrigendum AC:2000); German version EN 12944-1:1999 + AC:2000 DIN EN 12944-1-2000
Fertilizers and liming materials – Vocabulary – Part 2: Terms relating to fertilizers (including corrigendum AC:2000); German version EN 12944-2:1999 + AC:2000 DIN EN 12944-2-2000
Fertilizers and liming materials – Vocabulary – Part 3: Terms relating to liming materials; German version EN 12944-3:2001 DIN EN 12944-3-2002
Fibre cement slates and fittings – Product specification and test methods; German version EN 492:2004 + A1:2005 + A2:2006 DIN EN 492-2006
Fibre optic active components and devices – Package and interface standards – Part 1: General and guidance (IEC 62148-1:2002); German version EN 62148-1:2002 DIN EN 62148-1-2003
Fibre optic active components and devices – Package and interface standards – Part 10: SFF MU duplex 20-pin transceivers (IEC 62148-10:2003); German version EN 62148-10:2003 DIN EN 62148-10-2003
Fibre optic active components and devices – Package and interface standards – Part 12: Laser transmitters with coaxial RF connector (IEC 62148-12:2004); German version EN 62148-12:2004 DIN EN 62148-12-2004
Fibre optic active components and devices – Package and interface standards – Part 3: SFF MT-RJ 20-pin transceivers (IEC 62148-3:2003); German version EN 62148-3:2003 DIN EN 62148-3-2003
Fibre optic active components and devices – Package and interface standards – Part 5: SC 1×9 fibre optic modules (IEC 62148-5:2003); German version EN 62148-5:2003 DIN EN 62148-5-2003
Fibre optic active components and devices – Package and interface standards – Part 6: ATM-PON transceivers (IEC 62148-6:2003); German version EN 62148-6:2003 DIN EN 62148-6-2004
Fibre optic active components and devices – Performance standards – Part 3: 2,5 Gbit/s modulator-integrated laser diode transmitters (IEC 62149-3:2004); German version EN 62149-3:2004 DIN EN 62149-3-2004
Fibre optic active components and devices – Performance standards – Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers (IEC 62149-6:2003); German version EN 62149-6:2003 DIN EN 62149-6-2004
Fibre optic active components and devices – Test and measurement procedures – Part 1: General and guidance (IEC 62150-1:2005); German version EN 62150-1:2005 DIN EN 62150-1-2005
Fibre optic active components and devices – Test and measurement procedures – Part 2: ATM-PON transceivers (IEC 62150-2:2004); German version EN 62150-2:2004 DIN EN 62150-2-2005
Fibre optic branching devices – Part 1-1: Blank detail specification (IEC 60875-1-1:1996); German version EN 60875-1-1:1998 DIN EN 60875-1-1-1998
Fibre optic communication subsystem basic test procedures – Part 2-4: Test procedures for digital systems; bit-rate tolerance measurement (IEC 61280-2-4:1998); German version EN 61280-2-4:1998 DIN EN 61280-2-4-1999
Fibre optic communication subsystem basic test procedures – Part 4-2: Fibre optic cable plant – Single-mode fibre optic cable plant attenuation (IEC 61280-4-2:1999); German version EN 61280-4-2:1999 DIN EN 61280-4-2-2001
Fibre optic communication subsystem test procedures – Digital systems – Part 2-8: Determination of low BER using Q-factor measurements (IEC 61280-2-8:2003); German version EN 61280-2-8:2003 DIN EN 61280-2-8-2004
Fibre optic communication subsystem test procedures – Part 2-11: Digital systems – Averaged Q-factor determination using amplitude histogram evaluation for optical signal quality monitoring (IEC 61280-2-11:2006); German version EN 61280-2-11:2006 DIN EN 61280-2-11-2006
Fibre optic connector interfaces – Part 1: General and guidance (IEC 61754-1:1996); German version EN 61754-1:1997 DIN EN 61754-1-1997
Fibre optic connector interfaces – Part 15: Type LSH connector family (IEC 61754-15:1999); German version EN 61754-15:2001 DIN EN 61754-15-2002
Fibre optic connector interfaces – Part 16: Type PN connector family (IEC 61754-16:1999); German version EN 61754-16:2000 DIN EN 61754-16-2000
Fibre optic connector interfaces – Part 18: Type MT-RJ connector family (IEC 61754-18:2001); German version EN 61754-18:2002 DIN EN 61754-18-2002
Fibre optic connector interfaces – Part 4-1: Type SC connector family; Simplified receptacle SC-PC connector interfaces (IEC 61754-4-1:2003); German version EN 61754-4-1:2003 DIN EN 61754-4-1-2003
Fibre optic connector interfaces – Part 5: Type MT connector family (IEC 61754-5:2005); German version EN 61754-5:2005 DIN EN 61754-5-2006
Fibre optic connector interfaces – Part 6: Type MU connector family (IEC 61754-6:1997 + A1:2001 + A2:2004); German version EN 61754-6:1997 + A1:2001 + A2:2005 DIN EN 61754-6-2005
Fibre optic connector interfaces – Part 6-1: Type MU connector family; Simplified receptacle MU-PC connector interfaces (IEC 61754-6-1:2003); German version EN 61754-6-1:2003 DIN EN 61754-6-1-2003
Fibre optic connector interfaces – Part 9: Type DS connector family (IEC 61754-9:1996, modified); German version EN 61754-9:2001 DIN EN 61754-9-2002
Fibre optic connector optical interfaces – Part 2-2: Optical interface standard single mode angled physically contacting fibres (IEC 61755-2-2:2006); German version EN 61755-2-2:2006 DIN EN 61755-2-2-2007
Fibre optic enclosures – Part 1: Generic specification (IEC 62134-1:2002); German version EN 62134-1:2002 DIN EN 62134-1-2002
Fibre optic fan-outs – Part 1: Generic specification (IEC 61314-1:2005); German version EN 61314-1:2005 DIN EN 61314-1-2006
Fibre optic fan-outs – Part 1-1: Blank detail specification (IEC 61314-1-1:2006); German version EN 61314-1-1:2006 DIN EN 61314-1-1-2007
Fibre optic filters – Generic specification (IEC 61977:2001); German version EN 61977:2002 DIN EN 61977-2002
Fibre optic interconnecting devices and pasive components – Fibre optic connector interfaces – Part 7: Type MPO connector family (IEC 61754-7:2008); German version EN 61754-7:2008 DIN EN 61754-7-2008
Fibre Optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-1: Tests; Vibration (sinusoidal) (IEC 61300-2-1:2003); German version EN 61300-2-1:2003 DIN EN 61300-2-1-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-14: Tests – Optical power handling and damage threshold characterization (IEC 61300-2-14:2005); German version EN 61300-2-14:2006 DIN EN 61300-2-14-2006
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-16: Tests – Mould growth (IEC 61300-2-16:2006); German version EN 61300-2-16:2006 DIN EN 61300-2-16-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-17: Tests; Cold (IEC 61300-2-17:2003); German version EN 61300-2-17:2003 DIN EN 61300-2-17-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-19: Tests – Damp heat (steady state) (IEC 61300-2-19:2005); German version EN 61300-2-19:2005 DIN EN 61300-2-19-2006
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-2: Tests; Mating durability (IEC 61300-2-2:2003); German version EN 61300-2-2:2003 DIN EN 61300-2-2-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-21: Tests; composite temperature-humidity cyclic test (IEC 61300-2-21:1995); German version EN 61300-2-21:1997 DIN EN 61300-2-21-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-25: Tests: Sealing endurance for closures (IEC 61300-2-25:1995); German version EN 61300-2-25:1997 DIN EN 61300-2-25-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-26: Tests – Salt mist (IEC 61300-2-26:2006); German version EN 61300-2-26:2007 DIN EN 61300-2-26-2008
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-27: Tests; dust, laminar flow (IEC 61300-2-27:1995); German version EN 61300-2-27:1997 DIN EN 61300-2-27-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-29: Tests; low air pressure (IEC 61300-2-29:1995); German version EN 61300-2-29:1997 DIN EN 61300-2-29-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-30: Tests; solar radiation (IEC 61300-2-30:1995); German version EN 61300-2-30:1997 DIN EN 61300-2-30-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-33: Tests – Assembly and disassembly of fibre optic closures (IEC 61300-2-33:2006); German version EN 61300-2-33:2007 DIN EN 61300-2-33-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-36: Tests; flammability (fire hazard) (IEC 61300-2-36:1995); German version EN 61300-2-36:1997 DIN EN 61300-2-36-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-37: Tests – Cable bending for fibre optic closures (IEC 61300-2-37:2006); German version EN 61300-2-37:2007 DIN EN 61300-2-37-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-38: Tests – Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006); German version EN 61300-2-38:2006 DIN EN 61300-2-38-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-39: Tests; susceptibility to external magnetic fields (IEC 61300-2-39:1997); German version EN 61300-2-39:1997 DIN EN 61300-2-39-1997
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-40: Tests; Screen testing of attenuation of single-mode tuned angled optical connectors (IEC 61300-2-40:2000); German version EN 61300-2-40:2000 DIN EN 61300-2-40-2001
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-46: Tests – Damp heat cyclic (IEC 61300-2-46:2006); German version EN 61300-2-46:2006 DIN EN 61300-2-46-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-47: Tests – Thermal shocks (IEC 61300-2-47:2006); German version EN 61300-2-47:2007 DIN EN 61300-2-47-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-5: Tests, Torsion/twist (IEC 61300-2-5:2002); German version EN 61300-2-5:2002 DIN EN 61300-2-5-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-6: Tests: Tensile strength of coupling mechanism (IEC 61300-2-6:1995); German version EN 61300-2-6:1997 DIN EN 61300-2-6-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-7: Tests; bending moment (IEC 61300-2-7:1995); German version EN 61300-2-7:1997 DIN EN 61300-2-7-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-8: Tests: Bump (IEC 61300-2-8:1995); German version EN 61300-2-8:1997 DIN EN 61300-2-8-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-1: Examinations and measurements – Visual examination (IEC 61300-3-1:2005); German version EN 61300-3-1:2005 DIN EN 61300-3-1-2006
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-11: Examinations and measurements; engagement and separation forces (IEC 61300-3-11:1995); German version EN 61300-3-11:1997 DIN EN 61300-3-11-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-12: Examinations and measurements; polarization dependence of attenuation of a single-mode fibre optic component: Matrix calculation method (IEC 61300-3-12:1997); German version EN 61300-3-12:1997 DIN EN 61300-3-12-1997
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-19: Examinations and measurements; Polarization dependence of return loss of a single mode fibre optic component (IEC 61300-3-19:1997); German version EN 61300-3-19:1997 DIN EN 61300-3-19-1997
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-23: Examination and measurements – Fibre position relative to ferrule endface (IEC 61300-3-23:1998); German version EN 61300-3-23:1998 DIN EN 61300-3-23-1999
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-24: Examinations and measurements – Keying accuracy of optical connectors for polarization maintaining fibre (IEC 61300-3-24:2006); German version EN 61300-3-24:2007 DIN EN 61300-3-24-2007
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-26: Examinations and measurements; Measurement of the angular misalignment between fibre and ferrule axes; (IEC 61300-3-26:2002); German version EN 61300-3-26:2002 DIN EN 61300-3-26-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-29: Examinations and measurements – Measurement techniques for characterizing the amplitude of the spectral transfer function of DWDM components (IEC 61300-3-29:2005); German version EN 61300-3-29:2006 DIN EN 61300-3-29-2006
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-3: Examinations and measurements; Active monitoring of changes in attenuation and return loss (IEC 61300-3-3:2003); German version EN 61300-3-3:2003 DIN EN 61300-3-3-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-30: Examinations and measurements; Polish angle and fibre position on single ferrule multifibre connectors (IEC 61300-3-30:2003); German version EN 61300-3-30:2003 DIN EN 61300-3-30-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-31: Examinations and measurements; Coupled power ratio measurement for fibre optic sources (IEC 61300-3-31:2003); German version EN 61300-3-31:2003 DIN EN 61300-3-31-2003
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-36: Examinations and measurements; Measurement methods for the inside and outside diameters of fibre optic connector ferrules (IEC 61300-3-36:2000); German version EN 61300-3-36:2000 DIN EN 61300-3-36-2001
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-39: Examinations and measurements; PC optical connector reference plug selection (IEC 61300-3-39:1997); German version EN 61300-3-39:1997 DIN EN 61300-3-39-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-40: Examinations and measurements; Extinction ratio of a polarization maintaining (pm) fibre pigtailed connector (IEC 61300-3-40:1998); German version EN 61300-3-40:1998 DIN EN 61300-3-40-1998
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-5: Examinations and measurements; Wavelength dependence of attenuation (IEC 61300-3-5:2000); German version EN 61300-3-5:2001 DIN EN 61300-3-5-2001
Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 3-7: Examinations and measurements; Wavelength dependence of attenuation and return loss (IEC 61300-3-7:2000); German version EN 61300-3-7:2001 DIN EN 61300-3-7-2001
Fibre optic interconnecting devices and passive components – Basic tests and measurement procedures – Part 3-2: Examinations and measurements; polarization dependence of attenuation in a single-mode fibre optic device (IEC 61300-3-2:1999); German version EN 61300-3-2:1999 DIN EN 61300-3-2-2000
Fibre optic interconnecting devices and passive components – Interface standard for fibre management systems – Part 1: General and guidance (IEC 61756-1:2006); German version EN 61756-1:2006 DIN EN 61756-1-2007
Fibre optic interconnecting devices and passive components performance standard – Part 053-3: Continuously variable attenuators for category U – Uncontrolled environment (IEC 61753-053-3:2004); German version EN 61753-053-3:2004 DIN EN 61753-053-3-2004
Fibre optic interconnecting devices and passive components performance standard – Part 101-2: Fibre management systems for category C – Controlled environment (IEC 61753-101-2:2006); German version EN 61753-101-2:2006 DIN EN 61753-101-2-2007
Fibre optic interconnecting devices and passive components; basic test and measurement procedures – Part 2-24: Tests; screen testing of ceramic alignment split sleeve by stress application (IEC 61300-2-24:1999); German version EN 61300-2-24:2000 DIN EN 61300-2-24-2000
Fibre optic spatial switches – Part 1: Generic specification (IEC 60876-1:2001); German version EN 60876-1:2001 DIN EN 60876-1-2002
Fibre optic terminus sets – Part 1: Generic specification (IEC 61269-1:1994); German version EN 61269-1:1997 DIN EN 61269-1-1997
Fibre optic terminus sets – Part 1-1: Blank detail specification (IEC 61269-1-1:1994); German version EN 61269-1-1:1997 DIN EN 61269-1-1-1997
Fibre optics – Parameters of amplifier components (Technical Report IEC 61292-1:1998) DIN EN 61291 Bb.1-1999
Fibre optics; classification of fibre optic elements DIN 58140-2-1986
Fibre reinforced plastic composites – Determination of apparent interlaminar shear strength by short beam-method (ISO 14130:1997); German version EN ISO 14130:1997 DIN EN ISO 14130-1998
Fibre ropes – General specifications (ISO 9554:2005); German version EN ISO 9554:2005 DIN EN ISO 9554-2005
Fibre ropes – Manila and sisal – 3-, 4- and 8-strand ropes (ISO 1181:2004); German version EN ISO 1181:2004 DIN EN ISO 1181-2005
Fibre ropes – Polyamide – 3-, 4- and 8-strand ropes (ISO 1140:2004); German version EN ISO 1140:2004 DIN EN ISO 1140-2005
Fibre ropes – Polyethylene – 3- and 4-strand ropes (ISO 1969:2004); German version EN ISO 1969:2004 DIN EN ISO 1969-2005
Fibre ropes – Polypropylene split film, monofilament and multifilament (PP2) and polypropylene high tenacity multifilament (PP3) – 3-, 4- and 8-strand ropes (ISO 1346:2004); German version EN ISO 1346:2004 DIN EN ISO 1346-2005
Fibre ropes – Splices – Definitions, safety requirements, test method DIN 83319-1999
Fibre ropes of polyester/polyolefin dual fibres; German version EN 14686:2004 DIN EN 14686-2005
Fibreboard drums – Removable head (open head) drums with closing rings with a nominal capacity of 15 l to 250 l English version of DIN EN 12710:2006-08 DIN EN 12710-2006
Fibreboards – Specifications – Part 2: Requirements for hardboards – German version EN 622-2:2004, Corrigenda to DIN EN 622-2:2004-07; German version EN 622-2:2004/AC:2005 DIN EN 622-2 Berichtigung 1-2006
Fibreboards – Specifications – Part 2: Requirements for hardboards; German version EN 622-2:2004 DIN EN 622-2-2004
Fibreboards – Specifications – Part 3: Requirements for medium boards; German version EN 622-3:2004 DIN EN 622-3-2004
Fibreboards – Specifications – Part 4: Requirements for softboards; German version EN 622-4:1997 DIN EN 622-4-1997
Fibreboards – Specifications – Part 5: Requirements for dry process boards (MDF) English version of DIN EN 622-5:2006-09 DIN EN 622-5-2006
Fibreboards; determination of surface absorption; part 1: test method for dry process fibreboards; German version EN 382-1:1993 DIN EN 382-1-1993
Fibre-cement pipelines – Guide for laying and on-site work practices; German version EN 1444:2000 DIN EN 1444-2001
Fibre-cement pipes and fittings for discharge systems for buildings – Dimensions and technical terms of delivery; German version EN 12763:2000 DIN EN 12763-2000
Fibre-cement products – Pressure pipes and joints; Amendment A1:2001; German version EN 512:1994/A1:2001 DIN EN 512/A1-2002
Fibre-cement products – Pressure pipes and joints; German version EN 512:1994 DIN EN 512-1994
Fibre-cement profiled sheets and fittings – Product specification and test methods(includes Amendment A1:2005+A2:2006+A3:2007); English version of DIN EN 494:2007-06 DIN EN 494-2007
Fibre-reinforced plastic composites – Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999); English version of DIN EN ISO 15310 DIN EN ISO 15310-2005
Fibre-reinforced plastic composites – Determination of the in-plane shear stress/shear strain reponse, including the in-plane schear modulus and strength, by ? 45° tension test method (ISO 14129:1997); German version EN ISO 14129:1997 DIN EN ISO 14129-1998
Fibre-reinforced plastics – Moulding compounds and prepregs – Determination of mass per unit area (ISO 10352:1997); German version EN ISO 10352:1997 DIN EN ISO 10352-1997
Fibre-reinforced plastics – Moulding compounds and prepregs – Determination of resin, reinforced-fibre and mineral-filler content – Dissolution methods (ISO 11667:1997); German version EN ISO 11667:1999 DIN EN ISO 11667-1999
Fibre-reinforced plastics – Thermosetting moulding compounds and prepregs – Determination of flowability, maturation and shelf life (ISO 12115:1997); German version EN ISO 12115:1997 DIN EN ISO 12115-1997
Fibres for concrete – Part 2: Polymer fibres – Definitions, specifications and conformity; English version of DIN EN 14889-2:2006-11 DIN EN 14889-2-2006
Fibrous gypsum plaster casts – Definitions, requirements and test methods; English version of DIN EN 13815:2006-12 DIN EN 13815-2006
Field acceptance tests of storage pumps DIN 4325-1971
Filament-wound FRP pressure vessels – Materials, design, manufacturing and testing; English version of DIN EN 13923:2006-02 DIN EN 13923-2006
Files and rasps; terminology DIN 7285-1988
Filler metals for aluminium and aluminium alloys – Part 3: Test pieces, test specimens, mechanical and technological properties of all-weld metal DIN 1732-3-2007
Film 16 mm – Part 1: Image area produced by camera aperture and projectable image area; aspect ratio 1,37 : 1 DIN 15602-1-1996
Film 16 mm; dimensions of tape splices for magnetic film 16 mm, oblique DIN 15653-2-1984
Film 16 mm; leader and run-out trailer for direct front projection DIN 15698-1-1978
Film 16 mm; magnetic sound head, requirements and general data for measuring DIN 15668-1978
Film 16 mm; motion-picture projection reels; reel containers DIN 15621-1982
Film 16 mm; optical reduction printing; fundamental dimensions; factors of influence, scale of reduction DIN 15602-6-1983
Film 16 mm; position of film relative to camera aperture; position of reference perforation hole DIN 15630-1982
Film 16 mm; saturation level of optical sound records DIN 15607-1971
Film 17,5 mm and film 35 mm; dimensions of tape splices for magnetic film 17,5 mm and magnetic film 35 mm, oblique DIN 15540-2-1984
Film 35 mm; image area produced by camera aperture and projectable image area; aspect ratio 1,37 : 1 DIN 15502-1-1989
Film 35 mm; image produced by camera aperture and projected image area, anamorphotic method, lateral compression ratio 2:1 and aspect ratio 2,35:1 DIN 15546-1981
Film 35 mm; image produced by camera aperture for general printing possibilities, aspect ratio 1,37 : 1 DIN 15502-3-1972
Film 35 mm; magnetic sound head, requirements and general data for measuring DIN 15568-1979
Film 35 mm; optical sound head for film 35 mm; requirements and general data for measuring DIN 15566-1981
Film 35 mm; photografic sound record, track position and slit image DIN 15503-1985
Film 35 mm; preamplifier for optical sound, general data for measuring DIN 15567-1980
Film 35 mm; printing aperture, aspect ratio 1,37 : 1 and 1,33 : 1 DIN 15502-5-1983
Film 35 mm; saturation level of optical sound records DIN 15507-1971
Film 70 mm; combined print (picture with six magnetic sound tracks) DIN 15703-1981
Film 70 mm; projection reel DIN 15721-1992
Film 8 mm type S; motion-picture film raw stock, dimensions DIN 15851-3-1978
Film and hybrid integrated circuits – Part 1: Generic specification – Capability approval procedure; German version EN 165000-1:1996 DIN EN 165000-1-1996
Film and hybrid integrated circuits; materials, methods for the assessment of conductive pastes DIN 41850-2-1985
Film code; time-code on magnetic film 16 mm DIN 15971-4-1977
Film coding; time and control 80 bit code on 16 mm magnetic film and 17,5 mm magnetic film DIN 15971-10-1986
Films for packaging; plastic films; properties, testing DIN 16995-1992
Filter elements – Particle filtration in fluids – Characterisation of the particle retention DIN 58920-2000
Filters for the measurement of audible sound in the presence of ultrasound (IEC 61012:1990); German version EN 61012:1998 DIN EN 61012-1998
Filters using waveguide type dielectric resonators – Part 1:Generic specification (IEC 61337-1:2004); German version EN 61337-1:2004 DIN EN 61337-1-2005
Filters using waveguide type dielectric resonators – Part 2: Guidance for use (IEC 61337-2:2004); German version EN 61337-2:2004 DIN EN 61337-2-2005
Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, compilation and fitting dimensions DIN 87151-1-1954
Filters; grey cast-iron coarse filters, rated width 40 up to 200, rated pressure 2.5, with flange fitting dimensions according to rated pressure 10, inventories DIN 87151-2-1954
Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method (ISO 18756:2003); German version EN ISO 18756:2005 DIN EN ISO 18756-2005
Fine ceramics (advanced ceramics, advanced technical ceramics) – Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method (ISO 15732:2003); German version EN ISO 15732:2005 DIN EN ISO 15732-2005
Fine-cut tobacco and smoking articles made from it – Methods of sampling, conditioning and analysis – Part 1: Sampling (ISO 15592-1:2001) DIN ISO 15592-1-2005
Fine-cut tobacco and smoking articles made from it – Methods of sampling, conditioning and analysis – Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter (ISO 15592-3:2003) DIN ISO 15592-3-2005
Fire barrieres; hinges for fire doors; spring hinge and supporting hinge DIN 18272-1987
Fire behaviour of building materials and building components – Part 12: Circuit integrity maintenance of electric cable systems; requirements and testing DIN 4102-12-1998
Fire behaviour of building materials and building components – Part 7: Roofing; definitions, requirements and testing DIN 4102-7-1998
Fire Behaviour of Building Materials and Building Components; Fire Barriers, Barriers in Lift Wells and Glazings Resistant against Fire; Definitions, Requirements and Tests DIN 4102-5-1977
Fire behaviour of building materials and building components; synopsis and application of classified building materials, components and special components DIN 4102-4-1994
Fire behaviour of building materials and elements; determination of melting point of mineral fibre insulating materials; concepts, requirements and testing DIN 4102-17-1990
Fire behaviour of building materials and elements; seals for cable penetrations; concepts, requirements and testing DIN 4102-9-1990
Fire brigade training facilities – Part 1: General requirements DIN 14097-1-2005
Fire classification of construction products and building elements – Part 2: Classification using data from fire resistance tests, excluding ventilation services; English version of DIN EN 13501-2:2008-01 DIN EN 13501-2-2008
Fire classification of construction products and building elements – Part 4: Classification using data from fire resistance tests on components of smoke control systems English version of DIN EN 13501-4:2007-04 DIN EN 13501-4-2007
Fire detection and fire alarm systems – Design and operation DIN 14675-2003
Fire detection and fire alarm systems – Design and operation; Amendment A1 DIN 14675/A1-2006
Fire detection and fire alarm systems – Part 10: Flame detectors – Point detectors; English version of DIN EN 54-10/A1:2006-03 DIN EN 54-10/A1-2006
Fire detection and fire alarm systems – Part 17: Short-circuit isolators; English version of DIN EN 54-17:2006-03 DIN EN 54-17-2006
Fire detection and fire alarm systems – Part 18: Input/output devices; English version of DIN EN 54-18:2006-03 DIN EN 54-18-2006
Fire detection and fire alarm systems – Part 21: Alarm transmission and fault warning routing equipment English version of DIN EN 54-21:2006-08 DIN EN 54-21-2006
Fire detection and fire alarm systems – Part 4: Power supply equipment; German version EN 54-4:1997 DIN EN 54-4-1997
Fire detection and fire alarm systems-Part 18:Input/output devices Corrigendum 1 to English version of DIN EN 54-18:2006-03 DIN EN 54-18 Corrigendum 1-2007
Fire extinguishing and wash deck installation; hose couplings, armatures, hoses, accessories; summary of types for shipbuilding DIN 86200-1989
Fire fighter training facilities – Part 2: Gas-fuelled simulation devices DIN 14097-2-2005
Fire fighting and rescue service vehicles – Part 1: Nomenclature and designation; German version EN 1846-1:1998 DIN EN 1846-1-1998
Fire fighting equipment – Boat trailer DIN 14962-2005
Fire fighting equipment; fixing for projectors, boring pivot, joint DIN 14640-1974
Fire fighting equipment; trough DIN 14060-1980
Fire fighting equipment; two-pole connector 16 A, 42 V, plug DIN 14690-2-1974
Fire fighting vehicle – Part 22: TLF 16/24-Tr DIN 14530-22-1995
Fire hazard testing – Part 1-1: Guidance for assessing the fire hazard of electrotechnical products; General guidelines (IEC 60695-1-1:1999 + Corrigendum 2000); German version EN 60695-1-1:2000 DIN EN 60695-1-1-2000
Fire hazard testing – Part 11-5: Test flames – Needle-flame test method – Apparatus, confirmatory test arrangement and guidance (IEC 60695-11-5:2004); German version EN 60695-11-5:2005 DIN EN 60695-11-5-2005
Fire hazard testing – Part 1-30: Guidance for assessing the fire hazard of electrotechnical products – Use of preselection testing procedures (IEC 60695-1-30:2002); German version EN 60695-1-30:2002 DIN EN 60695-1-30-2003
Fire hazard testing – Part 2-10: Glowing/hot-wire based test methods; Glow-wire apparatus and common test procedure (IEC 60695-2-10:2000); German version EN 60695-2-10:2001 DIN EN 60695-2-10-2001
Fire hazard testing – Part 4: Terminology concerning fire tests for electrotechnical products (IEC 60695-4:2005); German version EN 60695-4:2006, text German, English and French DIN EN 60695-4-2007
Fire hazard testing – Part 5-1: Corrosion damage effects of fire effluent; General guidance (IEC 60695-5-1:2002); German version EN 60695-5-1:2003 DIN EN 60695-5-1-2003
Fire hazard testing – Part 6-1: Smoke obscuration – General guidance (IEC 60695-6-1:2005); German version EN 60695-6-1:2005 DIN EN 60695-6-1-2006
Fire hazard testing – Part 7-1: Toxicity of fire effluent – General guidance (IEC 60695-7-1:2004); German version EN 60695-7-1:2004 DIN EN 60695-7-1-2005
Fire hazard testing – Part 9-1: Surface spread of flame – General guidance (IEC 60695-9-1:2005); German version EN 60695-9-1:2005 DIN EN 60695-9-1-2006
Fire precaution regulation – Part 2: Part B (for persons without special tasks of fire prevention and fire fighting); rules for drafting DIN 14096-2-2000
Fire resistance tests – Part 1: General requirements; German version EN 1363-1:1999 DIN EN 1363-1-1999
Fire resistance tests for loadbearing elements – Part 2: Floors and roofs; German version EN 1365-2:1999 DIN EN 1365-2-2000
Fire resistance tests for loadbearing elements – Part 5: Balconies and walkways; German version EN 1365-5:2004 DIN EN 1365-5-2005
Fire resistance tests for service installations – Part 3: Penetration seals; German version EN 1366-3:2004 DIN EN 1366-3-2004
Fire resistance tests for service installations – Part 5: Service ducts and shafts; German version EN 1366-5:2003 DIN EN 1366-5-2003
Fire resistance tests for service installations – Part 8: Smoke extraction ducts; German version EN 1366-8:2004 DIN EN 1366-8-2004
Fire resistance tests on service installations – Part 1: Ducts; German version EN 1366-1:1999 DIN EN 1366-1-1999
Fire safety of large roofs for buildings – Fire exposure from below – Part 2: List of roofs, which fulfil the requirements of DIN 18234-1; Roof areas without openings DIN 18234-2-2003
Fire safety of large roofs for buildings – Fire exposure from below – Part 3: Definitions, requirements and tests at roof penetrations and roof edges DIN 18234-3-2003
Fire safety of large roofs for buildings – Fire exposure from below – Part 4: List of roof penetrations and roof edges, which fulfil the requirements of DIN 18234-3 DIN 18234-4-2003
Fire safety storage cabinets – Part 2: Safety cabinets for pressurised gas cylinders; English version of DIN EN 14470-2:2006-11 DIN EN 14470-2-2006
Fire stations – Part 3: Tower for fire stations, exercise wall DIN 14092-3-2001
Fire stations – Part 4: Workshop for respirators; Elements for design DIN 14092-4-2001
Fire stations – Part 6: Workshops for fire fighting hoses; Elements for design DIN 14092-6-2001
Fire test – Large-scale room reference test for surface products; English version of DIN EN 14390:2007-04 DIN EN 14390-2007
Firefighting and fire protection – Fire-brigade indication panel for fire detection and fire alarm systems DIN 14662-2002
Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance; English version of DIN EN 1846-2:2001/A2:2006-10 DIN EN 1846-2/A2-2006
Firefighting and rescue service vehicles – Part 2: Common requirements – Safety and performance; German version EN 1846-2:2001/A1:2004 DIN EN 1846-2/A1-2005
Firefighting equipment – Explosion-proof portable transfer pump for dangerous fluids, with electric motor – Requirements, testing DIN 14427-2005
Firefighting equipment – Explosion-proof portable transfer pump with electric motor – Requirements, type and acceptance test DIN 14424-2005
Firefighting equipment – Fire-brigade control panel for fire detection and fire alarm systems DIN 14661-2008
Firefighting equipment – Permanently installed generators (generating sets) less than 12 kVA for the use in firefighting vehicles DIN 14687-2007
Fire-fighting equipment for fire-fighting and rescue service vehicles – Part 10: Sealing chest DIN 14800-10-2005
Fire-fighting equipment for fire-fighting and rescue service vehicles – Part 12: Unlocking tool chest DIN 14800-12-2005
Fire-fighting equipment for fire-fighting and rescue service vehicles – Part 15: Environmental damage chest DIN 14800-15-2005
Fire-fighting equipment for fire-fighting and rescue service vehicles – Part 4: Tool chest for chimney DIN 14800-4-2005
Fire-fighting equipment for fire-fighting and rescue service vehicles – Part 5: Set of multi purpose pull devices DIN 14800-5-2005
Fire-fighting equipment for fire-fighting and rescue service vehicles – Part 9: Tool chests for metalworking and woodworking DIN 14800-9-2005
Fire-fighting equipment for fire-fighting vehicles; portable oxygen cutting apparatus DIN 14800-7-1984
Firefighting purposes – Escape ladder installations – Part 2: Rescue ways on flat and inclined roofs DIN 14094-2-2007
Fire-fighting purposes; locking device DIN 14925-1983
Fire-fighting vehicles – Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16 DIN 14530-11-2004
Fire-fighting vehicles – Part 11: Group pumping appliance LF 20/16, Group pumping appliance for rescue operations HLF 20/16; Amendment A1 DIN 14530-11/A1-2007
Firefighting vehicles – Part 5: Group pumping appliance LF 10/6, Group pumping appliance for rescue operations HLF 10/6 DIN 14530-5-2007
Fireplaces fired by solid fuel – Independent supply through the room air – Part 1: Roomheaters DIN 18897-1-2005
Fireworks – Part 17: Ground spinners – Specification and test methods; German version EN 14035-17:2004 DIN EN 14035-17-2004
Fireworks – Part 18: Hand-held fountains – Specification and test methods; German version EN 14035-18:2004 DIN EN 14035-18-2005
Fireworks – Part 2: Classification Corrigendum 1 to English version of DIN EN 14035-2:2003-09 DIN EN 14035-2 Corrigendum 1-2005
Fireworks – Part 20: Jumping crackers – Specification and test methods; German version EN 14035-20:2005 DIN EN 14035-20-2005
Fireworks – Part 21: Jumping ground spinners – Specification and test methods; English version of DIN EN 14035-21:2006 DIN EN 14035-21-2006
Fireworks – Part 25: Party Poppers – Specification and test methods; English version of DIN EN 14035-25:2006 DIN EN 14035-25-2006
Fireworks – Part 27: Rockets – Specification and test methods Corrigendum 1 to English version of DIN EN 14035-27:2003-09 DIN EN 14035-27 Corrigendum 1-2005
Fireworks – Part 27: Rockets – Specification and test methods; German version EN 14035-27:2003, Corrigenda to DIN EN 14035-27:2003-09; German version EN 14035-27:2003/AC:2005 DIN EN 14035-27 Berichtigung 1-2005
Fireworks – Part 27: Rockets; Specification and test methods; German version EN 14035-27:2003 DIN EN 14035-27-2003
Fireworks – Part 35: Throwdowns – Specification and test methods; German version EN 14035-35:2004 DIN EN 14035-35-2005
Fireworks – Part 36: Wheels – Specification and test methods; German version EN 14035-36:2004 DIN EN 14035-36-2004
Fireworks – Part 38: Shot tubes – Specification and test methods English version of DIN EN 14035-38:2006-05 DIN EN 14035-38-2006
Fireworks – Part 4: Bangers and banger batteries – Specification and test methods Corrigendum 1 to English version of DIN EN 14035-4:2003-09 DIN EN 14035-4 Corrigendum 1-2005
Fireworks – Part 4: Bangers and batteries; Specification and test methods; German version prEN 14035-4:2003 DIN EN 14035-4-2003
Fireworks – Part 7: Bengal matches – Specification and test methods; German version EN 14035-7:2004 DIN EN 14035-7-2004
Firmer gouges DIN 5142-1973
First aid material – First aid box B DIN 13164-1998
First aid material – First aid box C DIN 13157-1996
Fish bolts – Part 2: With square head DIN 5903-2-1997
Fishing nets – Determination of breaking force and knot breaking force of netting yarns (ISO 1805:2006); English version of DIN EN ISO 1805:2007-02 DIN EN ISO 1805-2007
Fishing nets – Netting – Basic terms and definitions (ISO 1107:2003); German version EN ISO 1107:2003 DIN EN ISO 1107-2003

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Tags: ,

Comments are closed.