Sell: DIN Standards (DIN EN) page 6-3 In the Cheapest

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Fishplates for grooveless flat bottom rails dimensions – Steel types DIN 5902-1995
Fittings for butt welding into copper-nickel-alloy pipelines – Concentric reducers DIN 86089-2008
Fittings for butt welding into copper-nickel-alloy pipelines – Technical specifications DIN 86086-2008
Fittings for domestic installation; nonferrous metal union nuts DIN 3292-1-1984
Fittings for food, chemical and pharmaceutical industry – Round thread connections – Design of threaded and conical connection pieces DIN 11887-1998
Fittings for international shore connection of fire extinguishing installations on ships – Nominal pressure 16 DIN 86201-2000
Fittings for overhead lines and switchgear; dynamic-mechanical behaviour of antivibration fittings DIN VDE 0212-51-1986
Fittings for overhead lines and switchgear; insulation behaviour of fittings for insulated overhead lines DIN VDE 0212-55-1989
Fittings for the food, chemical and pharmaceutical industries – Clamp connections for stainless steel tubes – Weld-on type DIN 32676-2001
Fixed capacitors for use in electronic equipment – Part 14: Sectional specification – Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (IEC 60384-14:2005); German version EN 60384-14:2005 DIN EN 60384-14-2006
Fixed capacitors for use in electronic equipment – Part 14-3: Blank detail specification – Fixed capacitors for electromagnetic interference suppression and connection to the supply mains – Assessment level DZ (IEC 60384-14-3:2004); German version EN 60384-14-3:2004 DIN EN 60384-14-3-2005
Fixed capacitors for use in electronic equipment – Part 16-1: Blank detail specification: Fixed metallized polypropylene film dielectric d.c. capacitors – Assessment levels E and EZ (IEC 60384-16-1:2005); German version EN 60384-16-1:2005 DIN EN 60384-16-1-2006
Fixed capacitors for use in electronic equipment – Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors (IEC 60384-17:2005); German version EN 60384-17:2005 DIN EN 60384-17-2006
Fixed capacitors for use in electronic equipment – Part 18: Sectional specification – Fixed aluminium electrolytic surface mount capacitors with solid (MnO) and non-solid electrolyte (IEC 60384-18:2007); German version EN 60384-18:2007 DIN EN 60384-18-2007
Fixed capacitors for use in electronic equipment – Part 18-2: Blank detail specification – Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte – Assessment level EZ (IEC 60384-18-2:2007); German version EN 60384-18-2:2007 DIN EN 60384-18-2-2007
Fixed capacitors for use in electronic equipment – Part 19-1: Blank detail specification – Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors – Assessment level EZ (IEC 60384-19-1:2006); German version EN 60384-19-1:2006 DIN EN 60384-19-1-2006
Fixed capacitors for use in electronic equipment – Part 21-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 – Assessment level EZ (IEC 60384-21-1:2004 + Corrigendum 2004); German version EN 60384-21-1:2004 DIN EN 60384-21-1-2005
Fixed capacitors for use in electronic equipment – Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 – Assessment level EZ (IEC 60384-22-1:2004 + Corrigendum 2004); German version EN 60384-22-1:2004 DIN EN 60384-22-1-2005
Fixed capacitors for use in electronic equipment – Part 24: Sectional specification – Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte (IEC 60384-24:2006); German version EN 60384-24:2006 DIN EN 60384-24-2007
Fixed capacitors for use in electronic equipment – Part 3: Sectional specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte (IEC 60384-3:2006); German version EN 60384-3:2006 DIN EN 60384-3-2007
Fixed capacitors for use in electronic equipment – Part 6-1: Blank detail specification – Fixed metallized polycarbonate film dielectric d.c. capacitors – Assessment level E (IEC 60384-6-1:2005); German version EN 60384-6-1:2005 DIN EN 60384-6-1-2006
Fixed capacitors for use in electronic equipment; blank detail specification: aluminium electrolytic capacitors with solid electrolyte, assessment level E; identical with IEC 60384-4-2:1985 DIN IEC 60384-4-2-1991
Fixed capacitors for use in electronic equipment; part 10: sectional specification: fixed multilayer ceramic chip capacitors; identical with IEC 60384-10:1989 DIN IEC 60384-10-1993
Fixed electric double-layer capacitors for use in electronic equipment – Part 2-1: Blank detail specification – Electric-double layer capacitors for power application – Assessment level EZ (IEC 62391-2-1:2006); German version EN 62391-2-1:2006 DIN EN 62391-2-1-2007
Fixed fire fighting systems – Components for gas extinguishing systems – Part 1: Requirements and test methods for electrical automatic control and delay devices; German version EN 12094-1:2003, Corrigenda to DIN EN 12094-1:2003-07 DIN EN 12094-1 Berichtigung 1-2006
Fixed firefighting systems – Components for gas extinguishing systems – Part 10: Requirements and test methods for pressure gauges and pressure switches; German version EN 12094-10:2003 DIN EN 12094-10-2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 12: Requirements and test methods for pneumatic alarm devices; German version EN 12094-12:2003 DIN EN 12094-12-2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 2: Requirements and test methods for non-electrical automatic control and delay devices; German version EN 12094-2:2003 DIN EN 12094-2-2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 3: Requirements and test methods for manual triggering and stop devices; German version EN 12094-3:2003 DIN EN 12094-3-2003
Fixed firefighting systems – Components for gas extinguishing systems – Part 9: Requirements and test methods for special fire detectors; German version EN 12094-9:2003 DIN EN 12094-9-2003
Fixed guard rails on deck of sea-going passenger ships DIN 81706-2007
Fixed handles for switch gears DIN 46001-1977
Fixed Radio Systems – Characteristics and requirements for point-to-point equipment and antennas – Part 2-2: Harmonized EN covering essential requirements of Article 3.2 of R&TTE Directive for digital systems operating in frequency bands where frequency co-ordination is applied (Endorsement of the English version EN 302217-2-2 V1.2.3 (2007-09) as German standard) DIN EN 302217-2-2-2008
Fixed radio systems – Conformance testing – Part 2-1: Point-to-multipoint equipment; Definitions and general requirements (Endorsement of the English version EN 301126-2-1 V 1.1.1 (2000-12) as German Standard) DIN EN 301126-2-1-2001
Fixed radio systems – Conformance testing – Part 2-2: Point-to-multipoint equipment; Test procedures for FDMA systems (Endorsement of the English version EN 301126-2-2 V 1.1.1 (2000-11) as German Standard) DIN EN 301126-2-2-2001
Fixed Radio Systems – Conformance testing – Part 2-3: Point-to-Multipoint equipment – Test procedures for TDMA systems (Endorsement of the English version EN 301126-2-3 V1.2.1 (2004-11) as German standard) DIN EN 301126-2-3-2005
Fixed radio systems – Conformance testing – Part 2-4: Point-to-multipoint equipment; Test procedures for FH-CDMA systems (Endorsement of the English version EN 301126-2-4 V 1.1.1 (2000-11) as German Standard) DIN EN 301126-2-4-2001
Fixed radio systems – Conformance testing – Part 2-5: Point-to-multipoint equipment; Test procedures for DS-CDMA systems (Endorsement of the English version EN 301126-2-5 V 1.1.1 (2000-11) as German Standard) DIN EN 301126-2-5-2001
Fixed Radio Systems – Conformance testing – Part 2-6: Point-to-Multipoint equipment; Test procedures for Multi Carrier Time Division Multiple Access (MC-TDMA) systems (Endorsement of the English version EN 301126-2-6 V 1.1.1 (2002-02) as German standard) DIN EN 301126-2-6-2003
Fixed Radio Systems – Conformance testing – Part 3-1: Point-to-Point antennas – Definitions, general requirements and test procedures (Endorsement of the English version EN 301126-3-1 V1.1.2 (2002-12) as German standard) DIN EN 301126-3-1-2004
Fixed Radio Systems – Conformance testing – Part 3-2: Point-to-Multipoint antennas – Definitions, general requirements and test procedures (Endorsement of the English version EN 301126-3-2 V1.2.1 (2003-12) as German standard) DIN EN 301126-3-2-2004
Fixed Radio Systems – Multipoint Equipment and Antennas – Part 2: Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive for Digital Multipoint Radio Equipment (Endorsement of the English version EN 302326-2 V1.2.2 (2007-06) as German standard) DIN EN 302326-2-2007
Fixed Radio Systems – Point to Multipoint Antennas – Antennas for Point-to-Multipoint fixed radio systems in the 1 GHz to 3 GHz band (Endorsement of the English version EN 301525 V 1.1.1 (2000-06) as German standard) DIN EN 301525-2001
Fixed Radio Systems – Point to Multipoint Antennas; Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band – Part 1: General aspects (Endorsement of the English version EN 301215-1 V 1.2.1 (2001-08) as German Standard) DIN EN 301215-1-2002
Fixed Radio Systems – Point-to-Multipoint Antennas – Antennas for point-to-multipoint fixed radio systems in the 11 GHz to 60 GHz band – Part 2: 24 GHz to 30 GHz (Endorsement of the English version EN 301215-2 V 1.3.1 (2002-06) as German standard) DIN EN 301215-2-2003
Fixed Radio Systems – Point-to-multipoint equipment – Frequency Division Multiple Access (FDMA) – Point-to-multipoint digital radio systems in frequency bands in the range 1 GHz to 3 GHz (Endorsement of the English version EN 301373 V 1.2.1 (2000-01) as German standard) DIN EN 301373-2001
Fixed Radio Systems – Point-to-multipoint equipment – Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods – Part 1:Basic parameters (Endorsement of the English version EN 301213-1 V 1.1.2 (2002-02) as German standard) DIN EN 301213-1-2003
Fixed Radio Systems – Point-to-multipoint equipment – Time Division Multiple Access (TDMA) – Point-to-multipoint digital radio systems in frequency bands in the range 3 GHz to 11 GHz (Endorsement of the English version EN 301021 V1.6.1 (2003-07) as German standard) DIN EN 301021-2004
Fixed Radio Systems – Point-to-multipoint equipment; Point-to-multipoint digital radio systems in frequency bands in the range 24,25 GHz to 29,5 GHz using different access methods – Part 2: Frequency Division Multiple Access (FDMA) methods (Endorsement of the English version EN 301213-2 V 1.3.1 (2001-06) as German standard) DIN EN 301213-2-2003
Fixed Radio Systems – Point-to-point equipment – High capacity digital radio systems carrying SDH signals (up to 2 × STM-1) in frequency bands with about 30 MHz channel spacing and using co-polar arrangements or Co-Channel Dual Polarized (CCDP) operation (Endorsement of the English version EN 301127 V 1.3.1 (2002-07) as German standard) DIN EN 301127-2003
Fixed Radio Systems – Point-to-point equipment – High capacity digital radio systems transmitting STM-4 or 4 x STM-1 in a 40 MHz radio frequency channel using Co-Channel Dual Polarized (CCDP) operation (Endorsement of the English version EN 301277 V 1.2.1 (2000-02) as German standard) DIN EN 301277-2001
Fixed radio systems – Point-to-point equipment – Parameters for digital radio systems for the transmission of digital signals operating at 55 GHz (Endorsement of the English version EN 300407 V 1.3.1 (2001-08) as German Standard) DIN EN 300407-2002
Fixed Radio Systems – Point-to-point equipment – Parameters for radio system for the transmission of digital signals operating in the frequency range 24,50 GHz to 29,50 GHz (Endorsement of the English version EN 300431 V1.4.1 (2002-07) as German standard) DIN EN 300431-2004
Fixed Radio Systems – Point-to-point equipment – Parameters for radio systems for the transmission of digital signals operating at 23 GHz (Endorsement of the English version EN 300198 V 1.5.1 (2002-07) as German standard) DIN EN 300198-2003
Fixed Radio Systems – Point-to-point equipment – Parameters for radio systems for the transmission of digital signals operating at 32 GHz and 38 GHz (Endorsement of the English version EN 300197 V1.6.1 (2002-07) as German standard) DIN EN 300197-2004
Fixed Radio Systems – Point-to-point equipment – Parameters for radio systems for the transmission of STM-1 digital signals operating in the 18 GHz frequency band with channel spacing of 55 MHz and 27,5 MHz (Endorsement of the English version EN 300430 V1.4.1 (2002-07) as German standard) DIN EN 300430-2004
Fixed Radio Systems – Point-to-point equipment – Part 2: Point-to-multipoint digital radio systems below 1 GHz; Additional parameters for TDMA systems (Endorsement of the English version EN 301460-2 V 1.1.1 (2000-10) as German standard) DIN EN 301460-2-2001
Fixed Radio Systems – Point-to-point equipment – Part 3: Point-to-multipoint digital radio systems below 1 GHz; Additional parameters for FH-CDMA systems (Endorsement of the English version EN 301460-3 V 1.1.1 (2000-10) as German standard) DIN EN 301460-3-2001
Fixed Radio Systems – Point-to-Point equipments and antennas – Generic harmonized standard for Point-to-Point digital fixed radio systems and antennas covering the essential requirements under article 3.2 of the 1999/5/EC Directive (Endorsement of the English version EN 301751 V 1.2.1 (2002-11) as German standard) DIN EN 301751-2003
Fixed resistors for use in electronic equipment; blank detail specification: fixed low-power non-wirewound resistors; assessment level F; identical with IEC 60115-2-2:1992 DIN IEC 60115-2-2-1993
Fixed resistors for use in electronic equipment; blank detail specification: fixed power resistors; assessment level F; identical with IEC 60115-4-2:1992 DIN IEC 60115-4-2-1993
Fixed resistors for use in electronic equipment; blank detail specification: fixed precision resistors; assessment level E; identical with IEC 60115-5-1, edition 1983 DIN IEC 60115-5-1-1987
Fixed resistors for use in electronic equipment; blank detail specification: fixed precision resistors; assessment level F; identical with IEC 60115-5-2:1992 DIN IEC 60115-5-2-1993
Fixed resistors for use in electronic equipment; blank detail specification: fixed resistor networks with individually measurable resistors, of either different resistance values or different rated dissipations; assessment level E; identical with IEC 60115-6-2, edition 1983 DIN IEC 60115-6-2-1986
Fixed resistors for use in electronic equipment; blank detail specification; fixed resistor networks in which not all resistors are individually measurable; assessment level E; identical with IEC 60115-7-1:1984 DIN IEC 60115-7-1-1989
Fixed resistors for use in electronic equipment; sectional specification: fixed low-power non-wirewound resistors; identical with IEC 60115-2, edition 1982 DIN IEC 60115-2-1987
Fixed resistors for use in electronic equipment; sectional specification: fixed precision resistors; identical with IEC 60115-5, edition 1982 DIN IEC 60115-5-1987
Fixed vertical road traffic signs – Part 3: Delineator posts and retroreflectors; English version of DIN EN 12899-3:2008-02 DIN EN 12899-3-2008
Fixed, vertical road traffic signs – Part 4: Factory production control; English version of DIN EN 12899-4:2008-02 DIN EN 12899-4-2008
Fixtures for advance warning triangle in passenger cars; requirements, tests DIN 75407-1986
Fixtures for fire extinguishers in passenger cars; requirements, tests DIN 75405-1980
Flame arresters – Performance requirements, test methods and limits for use; German version EN 12874:2001 DIN EN 12874-2001
Flame supervision devices for gas burning appliances – Thermo-electric flame supervision devices; German version EN 125:1991 + A1:1996 DIN EN 125-1996
Flameproof protective clothing for the mining industry – Part 1: Safety requirements and testing DIN 23320-1-1998
Flameproof protective clothing for the mining industry – Protecting clothing for people of mine rescue, gas rescue and fire rescue crews – Part 2: Single-piece working suits (combinations) DIN 23320-2-2003
Flameproof protective clothing for the mining industry – Protecting clothing for people of mine rescue, gas rescue and fire rescue crews – Part 4: Underwear DIN 23320-4-2003
Flanged steam traps DIN 3548-1-1993
Flanged steel pipes and fittings with hard or soft rubber linings – Technical delivery conditions DIN 2875-2002
Flanged steel pipes and flanged steel fittings glass lined – Technical specifications DIN 2876-2002
Flanged steel pipes and flanged steel or cast iron fittings with lining – PN 10, PN 25 and PN 40 DIN 2848-2002
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, Class designated – Part 1: Steel flanges, NPS 1/2 to 24; German version EN 1759-1:2004 DIN EN 1759-1-2005
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004 DIN EN 1092-3-2004
Flanges and their joints – Circular flanges for pipes, valves, fittings and accessories, PN designated – Part 4: Aluminium alloy flanges; German version EN 1092-4:2002 DIN EN 1092-4-2002
Flanges and their joints – Design rules for gasketed circular flange connections – Part 1: Calculation method; German version EN 1591-1:2001 DIN EN 1591-1-2001
Flanges and their joints – Design rules for gasketed circular flange connections – Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007 DIN CEN/TS 1591-4-2007
Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 1: Non-metallic flat gaskets with or without inserts; German version EN 1514-1:1997 DIN EN 1514-1-1997
Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 3: Non-metallic PTFE envelope gaskets; German version EN 1514-3:1997 DIN EN 1514-3-1997
Flanges and their joints – Dimensions of gaskets for PN-designated flanges – Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 1514-6:2003 DIN EN 1514-6-2004
Flanges and their joints – Gaskets for Class designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges; German version EN 12560-7:2004 DIN EN 12560-7-2004
Flanges and their joints – Gaskets for class-designated flanges – Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001 DIN EN 12560-4-2001
Flanges and their joints – Gaskets for PN-designated flanges – Part 2: Spiral wound gaskets for use with steel flanges; German version EN 1514-2:2005 DIN EN 1514-2-2005
Flanges and their joints – Gaskets for PN-designated flanges – Part 7: Covered metal jacketed gaskets for use with steel flanges; German version EN 1514-7:2004 DIN EN 1514-7-2004
Flanges for tank trucks; threaded flanges for couplings for tank trucks DIN 28462-1987
Flaps, weathertight; assembly DIN 83408-1-1987
Flare nut wrenches – Test torques series C DIN 3118-2007
Flat countersunk square neck bolts, with short square DIN 608-1981
Flat hexagon nuts for nipples and screw heads for electrical tubular heating elements, metal-sheated DIN 44879-1985
Flat polyvinyl chloride sheathed flexible cables; German version EN 50214:2006 DIN EN 50214-2007
Flat products made of steels for pressure purposes – Part 2: Non-alloy and alloy steels with specified elevated temperature properties; German version EN 10028-2:2003 DIN EN 10028-2-2003
Flat products made of steels for pressure purposes – Part 4: Nickel alloyed steels with specified low temperature properties; German version EN 10028-4:2003 DIN EN 10028-4-2003
Flat products made of steels for pressure purposes – Part 5: Weldable fine grain steels, thermomechanically rolled; German version EN 10028-5:2003 DIN EN 10028-5-2003
Flat products made of steels for pressure purposes – Part 6: Weldable fine grain steels, quenched and tempered; German version EN 10028-6:2003 DIN EN 10028-6-2003
Flat products of steel – Hot rolled patterned plate – Dimensions, mass, tolerances on dimensions, shape and mass DIN 59220-2000
Flat produts of steel – Hot rolled wide flats – Dimensions, mass, tolerances on dimensions, shape and mass DIN 59200-2001
Flat round head rivets; nominal diameters 1,4 to 6 mm DIN 674-1993
Flat-top chains for conveyors; shape S, shape D DIN 8153-1-1992
flax fibre; processing phases DIN 60011-1958
Flexible cellular polymeric materials – Determination of compression set (ISO 1856:2000+Amd 1:2007) (includes Amendment A1:2007); English version of DIN EN ISO 1856:2008-01 DIN EN ISO 1856-2008
Flexible cellular polymeric materials – Determination of hardness (indentation technique) (ISO 2439:1997, including Technical Corrigendum 1:1998); German version EN ISO 2439:2000 DIN EN ISO 2439-2001
Flexible cellular polymeric materials – Moulded and extruded sponge or expanded cellular rubber products – Compressibility test on finished parts (ISO 11752:2000) DIN ISO 11752-2004
Flexible cellular polymeric materials – Polyurethane foam for load-bearing applications excluding carpet underlay – Specification (ISO 5999:2007); English version of DIN EN ISO 5999:2008-01 DIN EN ISO 5999-2008
Flexible insulating sleeving – Part 3: Specification for individual types of sleeving – Sheet 409: Glass textile sleeving with polyurethane (PUR)-based coating (IEC 60684-3-409:1999); German version EN 60684-3-409:1999 DIN EN 60684-3-409-2000
Flexible insulating sleeving – Part 3: Specification for individual types of sleeving; Sheets 343 to 345: Expandable braided ethylene chlorotrifluoroethylene (E-CTFE) textile sleeving, uncoated (IEC 60684-3-343 to 345:2002); German version EN 60684-3-343 to 345:2002 DIN EN 60684-3-343 bis 345-2003
Flexible Insulating Sleeving – Part 3: Specification requirements for individual types of sleeving – Sheets 116 to 117: Extruded polychloroprene, general purpose (IEC 60684-3-116 bis 117:2003); German version EN 60684-3-116 bis 117:2003 DIN EN 60684-3-116 bis 117-2004
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 228: Heat-shrinkable, semi-rigid polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-228:2004); German version EN 60684-3-228:2004 DIN EN 60684-3-228-2005
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 233: Heat-shrinkable, fluoroelastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-233:2006); German version EN 60684-3-233:2006 DIN EN 60684-3-233-2006
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 271: Heat-shrinkable elastomer sleeving, flame retarded, fluid resistant, shrink ratio 2:1 (IEC 60684-3-271:2004); German version EN 60684-3-271:2004 DIN EN 60684-3-271-2005
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving; Sheet 300: Glass textile fibre sleeving, braided, uncoated (IEC 60684-3-300:2002); German version EN 60684-3-300:2002 DIN EN 60684-3-300-2003
Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving; Sheets 100 to 105: Extruded PVC sleeving (IEC 60684-3-100 to 105:2001); German version EN 60684-3-100 to 105:2001 DIN EN 60684-3-100 bis 105-2002
Flexible insulating sleeving – Part 9012: Heat shrinkable components – Sleevings with inner coating, detail specification DIN V VDE V 0341-9012-2007
Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of adhesion of granules; German version EN 12039:1999 DIN EN 12039-1999
Flexible sheets for waterproofing – Bitumen sheets for roof waterproofing – Determination of flexibility at low temperature; German version EN 1109:1999 DIN EN 1109-1999
Flexible sheets for waterproofing – Bitumen water vapour control layers – Definitions and characteristics; English version of DIN EN 13970/A1:2007-02 DIN EN 13970/A1-2007
Flexible sheets for waterproofing – Bitumen, plastic and rubber sheets for roof waterproofing – Rules for sampling; German version EN 13416:2001 DIN EN 13416-2001
Flexible sheets for waterproofing – Determination of dimensional stability – Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1107-2:2001 DIN EN 1107-2-2001
Flexible sheets for waterproofing – Determination of foldability at low temperature – Part 5: Plastic and rubber sheets for roof waterproofing; German version EN 495-5:2000 DIN EN 495-5-2001
Flexible sheets for waterproofing – Determination of resistance to tearing – Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12310-2:2000 DIN EN 12310-2-2000
Flexible sheets for waterproofing – Determination of shear resistance of joints – Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 12317-2:2000 DIN EN 12317-2-2001
Flexible sheets for waterproofing – Determination of thickness and mass per unit area – Part 1: Bitumen sheets for roof waterproofing; German version EN 1849-1:1999 DIN EN 1849-1-2000
Flexible sheets for waterproofing – Determination of visible defects – Part 2: Plastic and rubber sheets for roof waterproofing; German version EN 1850-2:2001 DIN EN 1850-2-2001
Flexible sheets for waterproofing – Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet – Definitions and characteristics English version of DIN EN 13967:2007-03 DIN EN 13967-2007
Flexible sheets for waterproofing – Plastic and rubber sheets for roof waterproofing – Method for exposure to bitumen; English version of DIN EN 1548:2007-11 DIN EN 1548-2007
Flexible sheets for waterproofing – Plastic and rubber vapour control layers – Definitions and characteristics; German version EN 13984:2004 DIN EN 13984-2005
Flexible sheets for waterproofing – Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles – Determination of crack bridging ability; English version of DIN EN 14224:2006-03 DIN EN 14224-2006
Flexible sheets for waterproofing – Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles – Determination of resistance to dynamic water pressure after damage by pre-treatment; German version EN 14694:2005 DIN EN 14694-2005
Flexible sheets for waterproofing – Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles – Determination of the behaviour of bitumen sheets during application of mastic asphalt; English version of DIN EN 14693:2006-11 DIN EN 14693-2006
Flexible sheets for waterproofing – Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles – Specimen preparation; German version EN 13375:2004 DIN EN 13375-2004
Flexural fatique testing of plastics using flat specimens DIN 53442-1990
Floating head heat exchanger with welded floating head; number of passes: 2, tubes 25, square tube pitch 32; number and pattern of tubes, tie rods and slide rails DIN 28190-1981
Floor cutting-off machines – Safety; German version EN 13862:2001 DIN EN 13862-2002
Floor drains with clean-out; particulars DIN 4284-2-1973
Floor drains with clean-out; summary DIN 4284-1-1973
Floor heating – Systems and components – Part 4: Installation; German version EN 1264-4:2001 DIN EN 1264-4-2001
Floor screeds – Part 4: Screeds laid on separated layer DIN 18560-4-2004
Floor screeds in building construction – Part 1: General requirements, testing and construction DIN 18560-1-2004
Flow funnels for half-pipe coil jackets for vessels; example for calculation DIN 28127 Bb.1-1987
Flow measurement; ranges, divisions and inscriptions of scales for flow indicators DIN 19204-1976
Flue gas dampers for gas appliances, thermaly controlled, connected to the appliances; requirements, testing, marking DIN 3388-4-1984
Flued oil stoves with vaporizing burners(includes Amendment A1:2007); English version of DIN EN 1:2007-12 DIN EN 1-2007
Fluid draughting media – Part 2: Water-based non-India ink; requirements and test conditions (ISO 9957-2:1995) DIN ISO 9957-2-1996
Fluid power – Hydraulic filters – Part 6: Test filter housings; dimensions DIN 24550-6-1999
Fluid power – Hydraulic filters – Part 8: Spin-on filters; filter and connection dimensions DIN 24550-8-1999
Fluid power – Round hydraulic reservoirs made of steel – Dimensions, requirements, test method – Nominal capacity 1000 to 20000 DIN 24567-1998
Fluid power systems and components – Components for hydraulic sytems – Part 2: Characteristics of electrical position transducers for hydraulic cylinders DIN 24564-2-2003
Fluid power systems and components – Cylinder bores and piston rod diameter – Metric series (ISO 3320:1987) DIN ISO 3320-2001
Fluid power systems and components; pressure; quantities, terms DIN 24312-1985
Fluid power; hydraulic filter elements for inline filters; envelope dimensions DIN 24550-3-1992
Fluid power; hydraulic filter elements for tank top return-line filters; envelope dimensions DIN 24550-4-1992
Fluid power; hydraulic reservoirs made of steel; dimensions, requirements, test methods; nominal capacity 63 to 1250 DIN 24339-1993
Fluid systems; O-rings; quality acceptance criteria DIN 3771-4-1984
Fluidpower; clevis bracket with pivot pin and locking plate; mounting dimensions DIN 24556-1990
Fluidpower; hydraulic cylinder 160 bar compact; mounting dimensions DIN 24554-1990
Fluidpower; hydraulic cylinder 250 bar, mounting dimensions DIN 24333-1979
Flywheel housings for reciprocating internal combustion engines; nominal dimensions and tolerances; identical with ISO 7648:1987 DIN ISO 7648-1988
Foam producing solutions for leak detection on gas installations; German version EN 14291:2004 DIN EN 14291-2005
Foils for packaging; laminated aluminium foils DIN 55531-1988
Folding dimensions for sales units of textiles; curtains DIN 61752-3-1977
Folding dimensions for sales units of textiles; professional clothing DIN 61752-4-1977
Folding dimensions for sales units of textiles; smocks and aprons DIN 61752-5-1977
Folding dimensions for sales units; cleaning cloths DIN 61752-8-1970
Folding dimensions for sales units; tapestries DIN 61752-9-1970
Font A for optical character recognition; characters and nominal dimensions; extension of the character set DIN 66008-6-1985
Fonts for optical character recognition; format for handheld scanner DIN 66223-5-1985
Fonts for optical character recognition; format for tape reader DIN 66223-3-1978
Food analysis – Determination of pesticide residues by LC-MS/MS – Tandem mass spectrometric parameters; German version CEN/TR 15641:2007 DIN-Fachbericht CEN/TR 15641-2007
Food equipment; sausage stuffers, filling horns and connections DIN 9798-1980
Food hygiene – Cleaning and disinfection DIN 10516-2001
Food hygiene – Containers for liquid, granulated and powdered foodstuffs – Part 5: Identification DIN 10502-5-2000
Food hygiene – Containers for liquid, granulated and powdered foodstuffs – Part 6: Cleaning and disinfection DIN 10502-6-2004
Food hygiene – Display cabinets – Part 5: Refrigerated display cabinets offering for sale salads and salad dressings in self service, hygiene requirements, testing DIN 10501-5-2006
Food hygiene – Mass catering – Company centre DIN 10506-2000
Food hygiene – Retained samples in mass catering DIN 10526-2003
Food hygiene – Self-service equipment for unpackaged food – Hygiene requirements DIN 10519-2000
Food processing machinery – Automatic dividers – Safety and hygiene requirements; English version of DIN EN 12042:2006-10 DIN EN 12042-2006
Food processing machinery – Basic concepts – Part 2: Hygiene requirements; German version EN 1672-2:2005 DIN EN 1672-2-2005
Food processing machinery – Bread slicers – Safety and hygiene requirements; English version of DIN EN 13954:2006-04 DIN EN 13954-2006
Food processing machinery – Circular saw machines – Safety and hygiene requirements; German version EN 12267:2003 DIN EN 12267-2004
Food processing machinery – Clipping machines – Safety and hygiene requirements;English version of DIN EN 13885:2006-02 DIN EN 13885-2006
Food processing machinery – Cubes cutting machinery – Safety and hygiene requirements; German version EN 13871:2005 DIN EN 13871-2005
Food processing machinery – Curing injection machines – Safety and hygiene requirements; English version of DIN EN 13534:2006-12 DIN EN 13534-2006
Food processing machinery – Derinding-, skinning- and membrane removal machines – Safety and hygiene requirements; German version EN 12355:2003 DIN EN 12355-2003
Food processing machinery – Dishwashing machines with conveyor – Safety and hygiene requirements English version of DIN EN 14957:2007-05 DIN EN 14957-2007
Food processing machinery – Dough mixers – Safety and hygiene requirements; German version EN 453:2000 DIN EN 453-2000
Food processing machinery – Filling machines and auxiliary machines – Safety and hygiene requirements; German version EN 12463:2004 DIN EN 12463-2005
Food processing machinery – Hand held blenders and whisks – Safety and hygiene requirements; German version EN 12853:2001 DIN EN 12853-2001
Food processing machinery – Intermediate provers – Safety and hygiene requirements; German version EN 12043:2000 DIN EN 12043-2001
Food processing machinery – Mincing machines – Safety and hygiene requirements; English version of DIN EN 12331/A1:2007-02 DIN EN 12331/A1-2007
Food processing machinery – Moulders – Safety and hygiene requirements; German version EN 12041:2000 DIN EN 12041-2001
Food processing machinery – Pie and tart machines – Safety and hygiene requirements; German version EN 13390:2002 DIN EN 13390-2002
Food processing machinery – Portable and/or hand-guided machines and appliances with mechanically driven cutting tools – Safety and hygiene requirements; English version of DIN EN 12984:2006-03 DIN EN 12984-2006
Food processing machinery – Rotating bowl cutters – Safety and hygiene requirements; German version EN 12855:2003 DIN EN 12855-2004
Food processing machinery – Salad dryers – Safety and hygiene requirements; German version EN 13621:2004 DIN EN 13621-2005
Food processing machinery – Vegetable cutting machines – Safety and hygiene requirements; German version EN 1678:1998 DIN EN 1678-1998
Food safety management systems – Requirements for any organization in the food chain (ISO 22000:2005); German version EN ISO 22000:2005, Corrigenda to DIN EN ISO 22000:2005-11 DIN EN ISO 22000 Berichtigung 1-2006
Foodstuffs – Detection of irradiated food containing bone – Method by ESR spectroscopy; German version EN 1786:1996 DIN EN 1786-1997
Foodstuffs – Detection of irradiated food containing fat – Gas chromatographic/mass spectrometric analysis of 2-alkylcyclobutanones; German version EN 1785:2003 DIN EN 1785-2003
Foodstuffs – Detection of irradiated food using Direct Epifluorescent Filter Technique/Aerobic Plate Count (DEFT/APC) – Screening method; German version EN 13783:2001 DIN EN 13783-2002
Foodstuffs – Determination of 3-monochloropropane-1,2-diol by GC/MS; German version EN 14573:2004 DIN EN 14573-2005
Foodstuffs – Determination of aflatoxin B and the sum of aflatoxin B, B, G and G in hazelnuts, peanuts, pistachios, figs and paprika powder – High performance liquid chromatographic method with post-column derivatisation and immunoaffinity column cleanup; English version of DIN EN 14123:2008-03 DIN EN 14123-2008
Foodstuffs – Determination of aflatoxin B, and the sum of aflatoxins B, B, G and G in cereals, shell-fruits and derived products – High performance liquid chromatographic method with post column derivatization and immunoaffinity column clean up; German version EN 12955:1999 DIN EN 12955-1999
Foodstuffs – Determination of aspartame in table top sweetener preparations – Method by high performance liquid chromatography; German version EN 1378:1996 DIN EN 1378-1996
Foodstuffs – Determination of domoic acid in mussels by HPLC; German version EN 14176:2003 DIN EN 14176-2004
Foodstuffs – Determination of fumonisins B and B in maize – HPLC method with solid phase extraction clean up; German version EN 13585:2001 DIN EN 13585-2002
Foodstuffs – Determination of isomalt, lactitol, maltitol, mannitol, sorbitol and xylitol in foodstuffs; German version EN 15086:2006 DIN EN 15086-2006
Foodstuffs – Determination of neohesperidin-dihydrochalcon by high-performance liquid chromatography (HPLC); German version CEN/TS 14537:2003 DIN CEN/TS 14537-2003
Foodstuffs – Determination of nitrate and/or nitrite content – Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products; German version EN 12014-2:1997 DIN EN 12014-2-1997
Foodstuffs – Determination of nitrate and/or nitrite content – Part 3: Spectrometric determination of nitrate and nitrite content of meat products after enzymatic reduction of nitrate to nitrite; German version EN 12014-3:2005 DIN EN 12014-3-2005
Foodstuffs – Determination of nitrate and/or nitrite content – Part 5: Enzymatic determination of nitrate content of vegetable-containing food for babies and infants; German version EN 12014-5:1997 DIN EN 12014-5-1997
Foodstuffs – Determination of ochratoxin A in barley and roasted coffee – HPLC method with immunoaffinity column clean-up; German version EN 14132:2003, Corrigenda to DIN EN 14132:2003-09; German version EN 14132:2003/AC:2006 DIN EN 14132 Berichtigung 1-2007
Foodstuffs – Determination of ochratoxin A in cereals and cereal products – Part 1: High performance liquid chromatographic method with silica gel clean up (ISO 15141-1:1998); German version EN ISO 15141-1:1998 DIN EN ISO 15141-1-1998
Foodstuffs – Determination of ochratoxin A in cereals and cereal products – Part 2: High performance liquid chromatographic method with bicarbonate clean up (ISO 15141-2:1998); German version EN ISO 15141-2:1998 DIN EN ISO 15141-2-1998
Foodstuffs – Determination of ochratoxin A in wine and beer – HPLC method with immunoaffinity column clean-up; German version EN 14133:2003 DIN EN 14133-2003
Foodstuffs – Determination of patulin in clear and cloudy apple juice and puree – HPLC method with liquid/liquid partition clean-up; German version EN 14177:2003 DIN EN 14177-2004
Foodstuffs – Determination of trace elements – Determination of arsenic in seafood by graphite furnace atomic absorption spectrometry (GFAAS) after microwave digestion; German version EN 14332:2004 DIN EN 14332-2004
Foodstuffs – Determination of trace elements – Determination of lead, cadmium, zinc, copper, iron and chromium by atomic absorption spectrometry (AAS) after dry ashing; German version EN 14082:2003 DIN EN 14082-2003
Foodstuffs – Determination of trace elements – Determination of total arsenic and selenium by hydride generation atomic absorption spectrometry (HGAAS) after pressure digestion; German version EN 14627:2005 DIN EN 14627-2005
Foodstuffs – Determination of trace elements – Pressure digestion; German version EN 13805:2002 DIN EN 13805-2002
Foodstuffs – Determination of vitamin A by high performance liquid chromatography – Part 2: Measurement of -carotene; German version EN 12823-2:2000 DIN EN 12823-2-2000
Foodstuffs – Determination of vitamin B by microbiological assay; German version ENV 14166:2002 DIN V ENV 14166-2002
Foodstuffs – Determination of vitamin B1 by HPLC Corrigendum 1 to English version of DIN EN 14122:2003-09 DIN EN 14122 Corrigendum 1-2006
Foodstuffs – Determination of vitamin B2 by HPLC; German version EN 14152:2003 DIN EN 14152-2003
Foodstuffs – Determination of vitamin B2 by HPLC; German version EN 14152:2003, Corrigenda to DIN EN 14152:2003-10; German version EN 14152:2003/AC:2005 DIN EN 14152 Berichtigung 1-2006
Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – General requirements and definitions (ISO 24276:2006); German version EN ISO 24276:2006 DIN EN ISO 24276-2006
Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Quantitative nucleic acid based methods (ISO 21570:2005); German version EN ISO 21570:2005, Corrigenda to DIN EN ISO 21570:2006-02; German version EN ISO 21570:2005/AC:2007 DIN EN ISO 21570 Berichtigung 1-2007
Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Quantitative nucleic acid based methods (ISO 21570:2005);English version of DIN EN ISO 21570:2006-02 DIN EN ISO 21570-2006
Foodstuffs – Methods of analysis for the detection of genetically modified organisms and derived products – Sampling strategies; German version CEN/TS 15568:2006 DIN CEN/TS 15568-2007
Foodstuffs – Thermoluminescence detection of irradiated food from which silicate minerals can be isolated; German version EN 1788:2001 DIN EN 1788-2002
Foodstuffs-Determination of ochratoxin A in wine and beer-HPLC method with immunoaffinity column clean-up Corrigendum 1 to English version of DIN EN 14133:2003-10 DIN EN 14133 Corrigendum 1-2007
Foodstuffs-Methods of analysis for the detection of genetically modified organisms and derived products-Quantitative nucleic acid based methods(ISO 21570:2005) Corrigendum 1 to English version of DIN EN ISO 21570:2006-02 DIN EN ISO 21570 Corrigendum 1-2007
Footboards and their fixation at refuse collection vehicles DIN 30733-2005
Footholds on bulwark DIN 83213-1993
Footwear – Ageing conditioning; German version EN 12749:1999 DIN EN 12749-1999
Footwear – Sampling location, preparation und duration of conditioning of samples and test pieces; German version EN 13400:2001 DIN EN 13400-2002
Footwear – Standard atmospheres for conditioning and testing of footwear and components for footwear; German version EN 12222:1997 DIN EN 12222-1997
Footwear – Test methods for accessories: shoe laces – Abrasion resistance (ISO 22774:2004); German version EN ISO 22774:2004 DIN EN ISO 22774-2005
Footwear – Test methods for accessories: Touch and close fasteners – Peel strength before and after repeated closing (ISO 22777:2004); German version EN ISO 22777:2004 DIN EN ISO 22777-2005
Footwear – Test methods for heels and top pieces – Top piece retention strength (ISO 19958:2004); German version EN ISO 19958:2004 DIN EN ISO 19958-2004
Footwear – Test methods for insoles – Dimensional stability; German version EN 12800:2000 DIN EN 12800-2000
Footwear – Test methods for insoles, linings and insocks – Perspiration resistance; German version EN 12801:2000 + A1:2001 DIN EN 12801-2002
Footwear – Test methods for outsoles – Abrasion resistance; German version EN 12770:1999 DIN EN 12770-2000
Footwear – Test methods for outsoles – Dimensional stability; German version EN 12772:1999 DIN EN 12772-2000
Footwear – Test methods for outsoles – Tear strength; German version EN 12771:1999 DIN EN 12771-2000
Footwear – Test methods for shanks – Longitudinal stiffness; German version EN 12959:2000 DIN EN 12959-2000
Footwear – Test methods for stiffeners and toepuffs – Mechanical characteristics (ISO 20864:2004); German version EN ISO 20864:2004 DIN EN ISO 20864-2005
Footwear – Test methods for uppers – Breaking strength and elongation; German version EN 13522:2001 DIN EN 13522-2002
Footwear – Test methods for uppers – Deformability (ISO 17695:2004); English version of DIN EN ISO 17695:2005 DIN EN ISO 17695-2005
Footwear – Test methods for uppers – Delamination resistance; German version EN 13514:2001 DIN EN 13514-2002
Footwear – Test methods for uppers – High temperature behaviour; German version EN 13519:2001 DIN EN 13519-2002
Footwear – Test methods for uppers – Resistance to damage on lasting (ISO 17693:2004); English version of DIN EN ISO 17693:2005 DIN EN ISO 17693-2005
Footwear – Test methods for uppers – Water resistance(includes Amendment A1:2005); English version of DIN EN 13518:2001 + A1:2005 DIN EN 13518-2005
Footwear – Test methods for uppers and lining – Water vapour permeability and absorption; German version EN 13515:2001 DIN EN 13515-2002
Footwear – Test methods for uppers, lining and insocks – Colour migration; German version EN 13517:2001 DIN EN 13517-2002
Footwear – Test methods for uppers, lining and insocks – Tear strength Corrigendum 1 to English version of DIN EN 13571:2002-04 DIN EN 13571 Corrigendum 1-2006
Footwear – Test methods for uppers, lining and insocks – Tear strength; German version EN 13571:2001 DIN EN 13571-2002
Footwear – Test methods for uppers, lining and insocks – Thermal insulation; German version EN 13521:2001 DIN EN 13521-2002
Footwear – Test methods for whole shoe – Upper sole adhesion (ISO 17708:2003); German Version EN ISO 17708:2003 DIN EN ISO 17708-2003
Footwear for firefighters; German version EN 15090:2006, Corrigenda to DIN EN 15090:2006-10 DIN EN 15090 Berichtigung 1-2007
Footwear manufacturing wastes – Waste classification and management; German version EN 12940:2004 DIN EN 12940-2004
Footwear, leather and imitation leather goods manufacturing machines – Modular shoe repair equipment – Safety requirements; English version of DIN EN 12387:2006-04 DIN EN 12387-2006
Footwear, leather and imitation leather goods manufacturing machines – Roughing, scouring, polishing and trimming machines – Safety requirements; German version EN 930:1997 DIN EN 930-1998
Footwear, leather and imitation leather goods manufacturing machines – Splitting, skiving, cutting, cementing and cement drying machines – Safety requirements; German version EN 13457:2004 DIN EN 13457-2005
Fork joints; yokes DIN 71752-1994
Forming rolls for beading machines, beading rolls; dimensions DIN 7381-1969
Forms of double logarithmic paper with scales in the ratio 2/1 DIN 43655-1969
Foundation earth electrode – General planning criteria DIN 18014-2007
Founding – Austempered ductile cast irons(includes Amendment A1:2006); English version of DIN EN 1564:2006-03 DIN EN 1564-2006
Founding – Austenitic cast irons; German version EN 13835:2002 + A1:2006 DIN EN 13835-2006
Founding – Equipment for the production of lost patterns for the lost foam casting process; German version EN 12892:2000 DIN EN 12892-2000
Founding – Equipment for the production of lost patterns for the lost wax casting process; German version EN 12883:2000 DIN EN 12883-2001
Founding – Liquid penetrant inspection – Part 1: Sand, gravity die and low pressure die castings; German version EN 1371-1:1997 DIN EN 1371-1-1997
Founding – Magnetic particle inspection; German version EN 1369:1996 DIN EN 1369-1997
Founding – Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores; German version EN 12890:2000 DIN EN 12890-2000
Founding – Technical conditions of delivery – Part 2: Additional requirements for steel castings; German version EN 1559-2:2000 DIN EN 1559-2-2000
Founding – Ultrasonic examination – Part 1: Steel castings for general purposes; German version EN 12680-1:2003 DIN EN 12680-1-2003
Founding – Ultrasonic examination – Part 2: Steel castings for highly stressed components; German version EN 12680-2:2003 DIN EN 12680-2-2003
Founding – Ultrasonic examination – Part 3: Spheroidal graphite cast iron castings; German version EN 12680-3:2003 DIN EN 12680-3-2003
Foundry machinery – Safety requirements for abrasive blasting equipment; German version EN 1248:2001 DIN EN 1248-2002
Four-way socket wrenches; test torques series A DIN 3119-1982
Frame frequency and film running speed for exposure and projection of motion-picture films DIN 15577-1982
Frame relay services – Part 1: General description; English version ETS 300399-1:1995 DIN ETS 300399-1-1995
Framework for energy market communications – Part 101: General guidelines; German version IEC/TR 62325-101:2005 DIN-Fachbericht IEC/TR 62325-101-2006
Framework for energy market communications – Part 501: General guidelines for use of ebXML; German version IEC/TR 62325-501:2005 DIN-Fachbericht IEC/TR 62325-501-2006
Free-cutting steels – Technical delivery conditions for semi-finished products, hot-rolled bars and rods; German version EN 10087:1998 DIN EN 10087-1999
Free-standing chimneys – Part 2: Concrete chimneys; English version of DIN EN 13084-2:2007-08 DIN EN 13084-2-2007
Free-standing chimneys – Part 5: Material for brick liners – Product specifications; German version EN 13084-5:2005, Corrigenda to DIN EN 13084-5:2005-12 DIN EN 13084-5 Berichtigung 1-2006
Free-standing chimneys – Part 6: Steel liners – Design and execution; German version EN 13084-6:2004 DIN EN 13084-6-2005
Free-standing chimneys – Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners English version of DIN EN 13084-7:2006-06 DIN EN 13084-7-2006
Free-standing steel stacks DIN V 4133-2007
Freight containers – Automatic identification (ISO 10374:1991 + AMD 1:1995) DIN ISO 10374-1996
Frequency and wave bands DIN 40015-1985
Frequency response and separation test record DIN 45543-1984
Friction pulley linings for winches and winders in mining DIN 22405-1990
Fruit and vegetable juices – Determination of glucose, fructose, sorbitol and sucrose contents – Method using high performance liquid chromatography; German version EN 12630:1999 DIN EN 12630-1999
Fruit and vegetable juices – Determination of nitrogen content – Kjeldahl method; German version EN 12135:1997 DIN EN 12135-1997
Fruit and vegetable juices – Determination of stable carbon isotope ratio (C/C) in the pulp of fruits juices – Method using isotope ratio mass spectrometry; German version ENV 13070:1998 DIN V ENV 13070-1998
Fruit and vegetable juices – Determination of sulfate content; German version EN 1142:1994 DIN EN 1142-1994
Fruit and vegetable juices – Determination of the free amino acids content – Liquid chromatographic method; German version EN 12742:1999 DIN EN 12742-1999
Fruit and vegetable juices – Determination of the pH-value; German version EN 1132:1994 DIN EN 1132-1994
Fruit and vegetable juices – Determination of the relative density; German version EN 1131:1994 DIN EN 1131-1994
Fruit and vegetable juices – Determination of the stable oxygen isotope ratio (O/O) of water from fruit juices – Method using isotope ratio mass spectrometry; German version ENV 12141:1996 DIN V ENV 12141-1996
Fruit and vegetable juices – Determination of total sulfur dioxide by destillation; German version EN 13196:2000 DIN EN 13196-2000
Fruit and vegetable juices – Enzymatic determination of acetic acid (acetate) content – NAD spectrometric method; German version EN 12632:1999 DIN EN 12632-1999
Fruit and vegetable juices – Enzymatic determination of citric acid (citrate) content; NADH spectrometric method; German version EN 1137:1994 DIN EN 1137-1994
Fruit and vegetable juices – Enzymatic determination of D- and L-lactic acid (lactate) content – NAD spectrometric method; German version EN 12631:1999 DIN EN 12631-1999
Fruit and vegetable juices – Enzymatic determination of D-malic acid content – NAD spectrometric method; German version EN 12138:1997 DIN EN 12138-1997
Fuel assembly identification for nuclear power reactors DIN 25433-1988
Fuel cell technologies – Part 3-1: Stationary fuel cell power systems – Safety (IEC 62282-3-1:2007); German version EN 62282-3-1:2007 DIN EN 62282-3-1-2008
Fuel filters for Diesel engines, shape A, body connections DIN 73358-1-1977
Fuel filters for Diesel engines; filter inserts DIN 73358-2-1977
Fuel injection equipment; vocabulary; part 1: fuel injection pumps; identical with ISO 7876-1:1990 DIN ISO 7876-1-1993
Fuel injection equipment; vocabulary; part 2: fuel injectors; identical with ISO 7876-2:1991 DIN ISO 7876-2-1994
Fume cupboards – Part 2: Safety and performance requirements; German version EN 14175-2:2003 DIN EN 14175-2-2003
Fume cupboards – Part 4: On-site test methods; German version EN 14175-4:2004 DIN EN 14175-4-2004
Fume cupboards – Part 5: Recommendations for installation and maintenance; English version CEN/TS 14175-5:2006 DIN CEN/TS 14175-5-2007
Fume cupboards – Part 6: Variable air volume fume cupboards English version of DIN EN 14175-6:2006-08 DIN EN 14175-6-2006
Fume hoods for radioactive materials – Rules for construction and tests DIN 25466-1995
Function blocks – Part 4: Rules for compliance profiles (IEC 61499-4:2005); German version EN 61499-4:2006 DIN EN 61499-4-2007
Functional receiver specification of satellite digital interactive television with a low data rate return channel via satellite – Modem layer specification; German version EN 50478:2007 DIN EN 50478-2007
Functional requirements for the interface between data terminal equipment and data circuit-terminating equipment – Part 1: General application DIN 66020-1-1999
Functional safety – Safety instrumented systems for the process industry sector – Part 2: Guidelines for the application of IEC 61511-1 (IEC 61511-2:2003); German version EN 61511-2:2004 DIN EN 61511-2-2005
Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 3: Software requirements (IEC 61508-3:1998 + Corrigendum 1999); German version EN 61508-3:2001 DIN EN 61508-3-2002
Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 7: Overview of techniques and measures (IEC 61508-7:2000); German version EN 61508-7:2001 DIN EN 61508-7-2003
Fundamentals for detection and determination of microorganisms in foodstuffs with impedance-method DIN 10115-1999
Fundamentals of maintenance DIN 31051-2003
Fundamentals of metrology – Part 3: Evaluation of measurements of a single measurand, measurement uncertainty DIN 1319-3-1996
Funeral Services – Requirements; German version EN 15017:2005 DIN EN 15017-2006
funStep (Furniture Product and Business Data) – funStep Application Activity Model AAM; English version CWA 14248:2001 DIN CWA 14248-2002
funStep(家具和商务数据).funStep应用活动模型AAM DIN CWA 14248-2002
Furnaces with lining for the chemical industry; instructions for design DIN 28070-1986
Furniture – Assessment of surface resistance to cold liquids (ISO 4211:1979, modified); German version EN 12720:1997 DIN EN 12720-1997
Furniture – Assessment of surface resistance to dry heat (ISO 4211-3:1993, modified); German version EN 12722:1997 DIN EN 12722-1997
Furniture – Assessment of surface resistance to wet heat (ISO 4211-2:1993, modified); German version EN 12721:1997 DIN EN 12721-1997
Furniture – Assessment of the effect of light exposure; English version of DIN EN 15187:2006-12 DIN EN 15187-2006
Furniture – Assessment of the ignitability of mattresses and upholstered bed bases – Part 1: Ignition source: Smouldering cigarette; German version EN 597-1:1994 DIN EN 597-1-1995
Furniture – Assessment of the ignitability of mattresses and upholstered bed bases – Part 2: Ignition source: Match flame equivalent; German version EN 597-2:1994 DIN EN 597-2-1995
Furniture – Assessment of the surface gloss; German version EN 13722:2004 DIN EN 13722-2004
Furniture – Bunk beds and high beds for domestic use – Part 1: Safety, strength and durability requirements; English version of DIN EN 747-1:2007-07 DIN EN 747-1-2007
Furniture – Bunk beds and high beds for non-domestic use – Part 1: Safety, strength and durability requirements; German version EN 13453-1:2004 DIN EN 13453-1-2004
Furniture – Bunk beds and high beds for non-domestic use – Part 2: Test methods; German version EN 13453-2:2004 DIN EN 13453-2-2004
Furniture – Chairs and tables for educational institutions – Part 1: Functional dimensions English version of DIN EN 1729-1:2006-09 DIN EN 1729-1-2006
Furniture – Cribs and cradles for domestic use – Part 1: Safety requirements; German version EN 1130-1:1996 DIN EN 1130-1-1996
Furniture – Links for non-domestic seating linked together in a row – Strength requirements and test methods; German version EN 14703:2007 DIN EN 14703-2007
Furniture removal activities – Storage of furniture and personal effects for private individuals – Part 2: Provision of the service; German version EN 14873-2:2005 DIN EN 14873-2-2005
Furniture surface; behaviour at glowing cigarette DIN 68861-6-1982
Furniture surfaces – Part 7: Behaviour subjection to dry heat DIN 68861-7-2001
Furniture surfaces; behaviour at scratches DIN 68861-4-1981
Furniture; concepts DIN 68880-1-1973
Fuseboxes for cable protection fuses DIN 43628-1998
Fusion hardening with additional materials – Specification for fusion hardening (SHA) – Form sheet DIN 30960-1999

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Tags: ,

Comments are closed.