Update for BSI Standards Collection-2010-10(14)

July 30th, 2009 | hench2004

http://www.findstandards.info
http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Quote: Hench2004@sina.com

BS EN ISO 7759:2010 Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometer
BS 11000-1:2010 Collaborative business relationships. A framework specification
BS 3F 128:2010 Specification for cotton webbing suitable for aerospace purposes (warp yarn nominally R 310 tex)
BS EN 13141-2:2010 Ventilation for buildings. Performance testing of components/products for residential ventilation. Exhaust and supply air terminal devices
BS EN 13245-3:2010 Plastics. Unplasticized poly(vinyl chloride) (PVCU) profiles for building applications. Designation of PVC-UE profiles
BS EN 13477-2:2010 Non-destructive testing. Acoustic emission. Equipment characterisation. Verification of operating characteristic
BS EN 13623:2010 Chemical disinfectants and antiseptics. Quantitative suspension test for the evaluation of bactericidal activity against Legionella of chemical disinfectants for aqueous systems. Test method and requirements (phase 2, step 1)
BS EN 1536:2010 Execution of special geotechnical works. Bored piles
BS EN 1538:2010 Execution of special geotechnical works. Diaphragm walls
BS EN 15725:2010 Extended application reports on the fire performance of construction products and building elements
BS EN 15757:2010 Conservation of cultural property. Specifications for temperature and relative humidity to limit climate-induced mechanical damage in organic hygroscopic materials
BS EN 15767-3:2010 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps. Portable monitors. Foam devices
BS EN 15938:2010 Automotive fuels. Ethanol blending component and ethanol (E85) automotive fuel. Determination of electrical conductivity
BS EN 4473:2010 Aerospace series. Aluminium pigmented coatings for fasteners. Technical specification
BS EN 4700-002:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Bar and section
BS EN 4700-005:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Forging stock
BS EN 4700-006:2010 Aerospace series. Steel and heat resisting alloys. Wrought products. Technical specification. Pre-production and production forgings
BS EN 50329:2003+A1:2010 Railway applications. Fixed installations. Traction transformers
BS EN 60079-20-1:2010 Explosive atmospheres. Material characteristics for gas and vapour classification. Test methods and data
BS EN 60127-2:2003+A2:2010 Miniature fuses. Cartridge fuse-links
BS EN 61000-4-18:2007+A1:2010 Electromagnetic compatibility (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test
BS EN 61558-2-3:2010 Safety of transformers, reactors, power supply units and combinations thereof. Particular requirements and tests for ignition transformers for gas and oil burners
BS EN ISO 7963:2010 Non-destructive testing. Ultrasonic testing. Specification for calibration block No. 2
BS EN ISO 8292-2:2010 Animal and vegetable fats and oils. Determination of solid fat content by pulsed NMR. Indirect method
BS EN ISO 8362-2:2010 Injection containers and accessories. Closures for injection vials
BS EN ISO 9554:2010 Fibre ropes. General specifications
BS ISO 105-F10:1989+A1:2009 Textiles. Tests for colour fastness. Specification for adjacent fabric. Multifibre
BS ISO 10668:2010 Brand valuation. Requirements for monetary brand valuation
BS ISO 11026:2010 Heavy commercial vehicles and buses. Test method for roll stability. Closing-curve test
BS ISO 11452-11:2010 Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Reverberation chamber
BS ISO 11596:2008 Jewellery. Sampling of precious metal alloys for and in jewellery and associated products
BS ISO 11790:2010 Copper, lead, zinc and nickel concentrates. Guidelines for the inspection of mechanical sampling systems
BS ISO 12573:2010 Aircraft. Tubing tolerances. Inch series
BS ISO 15686-10:2010 Buildings and constructed assets. Service life planning. When to assess functional performance
BS ISO 15893:2010 Space data and information transfer systems. Space communications protocol specification (SCPS). Transport protocol (SCPS-TP)
BS ISO 17712:2010 Freight containers. Mechanical seals
BS ISO 18280:2010 Plastics. Epoxy resins. Test methods
BS ISO 19250:2010 Water quality. Detection of Salmonella spp
BS ISO 2004:2010 Natural rubber latex concentrate. Centrifuged or creamed, ammonia-preserved types. Specifications
BS ISO 26062:2010 Nuclear technology. Nuclear fuels. Procedures for the measurement of elemental impurities in uranium- and plutonium-based materials by inductively coupled plasma mass spectrometry
BS ISO 3400:1997+A1:2009 Cigarettes. Determination of alkaloids in smoke condensates. Spectrometric method
BS ISO 48:2010 Rubber, vulcanized or thermoplastic. Determination of hardness (hardness between 10 IRHD and 100 IRHD)
BS ISO 5610-1:2010 Tool holders with rectangular shank for indexable inserts. General survey, correlation and determination of dimensions
BS ISO 5610-10:2010 Tool holders with rectangular shank for indexable inserts. Style N
BS ISO 5610-11:2010 Tool holders with rectangular shank for indexable inserts. Style R
BS ISO 5610-12:2010 Tool holders with rectangular shank for indexable inserts. Style S
BS ISO 5610-13:2010 Tool holders with rectangular shank for indexable inserts. Style T
BS ISO 5610-14:2010 Tool holders with rectangular shank for indexable inserts. Style H
BS ISO 5610-15:2010 Tool holders with rectangular shank for indexable inserts. Style V
BS ISO 5610-2:2010 Tool holders with rectangular shank for indexable inserts. Style A

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm
http://www.findstandards.info

Quote: Hench2004@sina.com

Update for IEC Standards Collection-2010-7(5)

July 30th, 2009 | hench2004

http://www.findstandards.info
http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Quote: Hench2004@sina.com

IEC/TS 60034-31 Ed. 1.0 b:2010 Rotating electrical machines – Part 31: Selection of energy-efficient motors including variable speed applications – Application guide
IEC 60603-7-2 Ed. 2.0 b:2010 “Connectors for electronic equipment – Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz”
IEC 60603-7-3 Ed. 2.0 b:2010 “Connectors for electronic equipment – Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz”
IEC 60603-7-4 Ed. 2.0 b:2010 “Connectors for electronic equipment – Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz ”
IEC 60603-7-5 Ed. 2.0 b:2010 “Connectors for electronic equipment – Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz ”
IEC 60747-16-3 Ed. 1.1 b:2010 Semiconductor devices – Part 16-3: Microwave integrated circuits – Frequency converters
IEC 61076-2-107 Ed. 1.0 b:2010 Connectors for electronic equipment – Product requirements – Part 2-107: Detail specification for circular hybrid connectors M12 with electrical and fibre-optic contacts with screw locking
IEC 61076-3-101 Ed. 1.0 b Cor.1:2010 “Corrigendum 1 – Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications – Part 3: Rectangular connectors – Section 101: Detail specification for a range of shielded connectors with trapezoidal
IEC 61076-3-118 Ed. 1.0 b:2010 Connectors for electronic equipment – Product requirements – Part 3-118: Rectangular connectors – Detail specification for a 4 pole plus PE power connector with push-pull coupling
IEC 61249-2-41 Ed. 1.0 b:2010 “Materials for printed boards and other interconnecting structures – Part 2-41: Reinforced base materials clad and unclad – Brominated epoxide cellulose paper/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper
IEC 61249-2-42 Ed. 1.0 b:2010 “Materials for printed boards and other interconnecting structures – Part 2-42: Reinforced base materials clad and unclad – Brominated epoxide non-woven/woven E-glass reinforced laminate sheets of defined flammability (vertical burning test), copper-clad
IEC 62416 Ed. 1.0 b:2010 Semiconductor devices – Hot carrier test on MOS transistors
IEC 62417 Ed. 1.0 b:2010 Semiconductor devices – Mobile ion tests for metal-oxide semiconductor field effect transistors (MOSFETs)
IEC 62418 Ed. 1.0 b:2010 Semiconductor devices – Metallization stress void test
CISPR 16-1-4 Ed. 3.0 b:2010 Specification for radio disturbance and immunity measuring apparatus and methods – Part 1-4: Radio disturbance and immunity measuring apparatus – Antennas and test sites for radiated disturbance measurements
CISPR 16-2-3 Ed. 3.0 b:2010 Specification for radio disturbance and immunity measuring apparatus and methods – Part 2-3: Methods of measurement of disturbances and immunity – Radiated disturbance measurements
IEC 60875-1 Ed. 5.0 en:2010 Fibre optic interconnecting devices and passive components – Non-wavelength-selective fibre optic branching devices – Part 1: Generic specification
IEC 61000-4-18 Amd.1 Ed. 1.0 b:2010 Amendment 1 – Electromagnetic compatibility (EMC) – Part 4-18: Testing and measurement techniques – Damped oscillatory wave immunity test
IEC 61000-4-3 Ed. 3.2 b:2010 “Electromagnetic compatibility (EMC) – Part 4-3: Testing and measurement techniques – Radiated, radio-frequency, electromagnetic field immunity test”
IEC 61156-2 Ed. 3.0 en:2010 Multicore and symmetrical pair/quad cables for digital communications – Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz – Horizontal floor wiring – Sectional specification
IEC 61300-2-24 Ed. 2.0 en:2010 Fibre optic interconnecting devices and passive components – Basic test and measurement procedures – Part 2-24: Tests – Screen testing of ceramic alignment split sleeve by stress application
IEC 61753-121-2 Ed. 1.0 en:2010 Fibre optic interconnecting devices and passive components – Performance standard – Part 121-2: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category C – Controlled environment
IEC 61753-121-3 Ed. 1.0 en:2010 Fibre optic interconnecting devices and passive components -Performance standard – Part 121-3: Simplex and duplex cords with single-mode fibre and cylindrical ferrule connectors for category U – Uncontrolled environment
IEC 61977 Ed. 2.0 en:2010 Fibre optic interconnecting devices and passive components – Fibre optic filters – Generic specification
IEC 62149-4 Ed. 2.0 b:2010 Fibre optic active components and devices – Performance standards – Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
IEC 62343-3-1 Ed. 1.0 b:2010 Dynamic modules – Part 3-1: Performance specification templates – Dynamic channel equalizers
IEC/PAS 61169-43 Ed. 1.0 en:2010 Radio-frequency connectors – Part 43: Sectional specification for RBMA series blind mating RF coaxial connectors
IEC/PAS 61169-44 Ed. 1.0 en:2010 Radio-frequency connectors – Part 44: Sectional specification for SMP push-on radio-frequency coaxial connectors
IEC/PAS 61753-088-2 Ed. 1.0 en:2010 Fibre optic interconnecting devices and passive components performance standard – Part 088-2: Non-connectorised single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C – Controlled environments
IEC/TR 61000-3-13 Ed. 1.0 en Cor.1:2010 “Corrigendum 1 – Electromagnetic compatibility (EMC) – Part 3-13: Limits – Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems”
IEC/TR 62278-3 Ed. 1.0 en:2010 “Railway applications – Specification and demonstration of reliability, availability, maintainability and safety (RAMS) – Part 3: Guide to the application of IEC 62278 for rolling stock RAM ”
IEC 60705 Ed. 4.0 b:2010 Household microwave ovens – Methods for measuring performance
IEC/TR 80002-1 and ISO 14971 Medical Devices Software Package IEC/TR 80002-1 and ISO 14971 Medical Devices Software Package
IEC 60335-1 Ed. 5.0 b:2010 Household and similar electrical appliances – Safety – Part 1: General requirements
IEC 60335-2-109 Ed. 1.0 b:2010 Household and similar electrical appliances – Safety – Part 2-109: Particular requirements for UV radiation water treatment appliances
IEC 62484 Ed. 1.0 b:2010 Radiation protection instrumentation – Spectroscopy-based portal monitors used for the detection and identification of illicit trafficking of radioactive material
IEC 61508-1 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 1: General requirements
IEC 61508-2 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
IEC 61508-3 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 3: Software requirements
IEC 61508-4 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 4: Definitions and abbreviations
IEC 61508-5 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 5: Examples of methods for the determination of safety integrity levels
IEC 61508-6 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 6: Guidelines on the application of IEC 61508-2 and IEC 61508-3
IEC 61508-7 Ed. 2.0 b:2010 Functional safety of electrical/electronic/programmable electronic safety-related systems – Part 7: Overview of techniques and measures
IEC 62465 Ed. 1.0 b:2010 Nuclear power plants – Instrumentation and control important to safety – Management of ageing of electrical cabling systems
IEC 60269-3 Ed. 4.0 b:2010 Low-voltage fuses – Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) – Examples of standardized systems of fuses A to F
IEC 60364-7-702 Ed. 3.0 b:2010 Low-voltage electrical installations – Part 7-702: Requirements for special installations or locations – Swimming pools and fountains
IEC 62271-101 Amd.1 Ed. 1.0 b:2010 Amendment 1 – High-voltage switchgear and controlgear – Part 101: Synthetic testing
IEC/TR 61967-1-1 Ed. 1.0 b:2010 Integrated circuits – Measurement of electromagnetic emissions – Part 1-1: General conditions and definitions – Near-field scan data exchange format
IEC 61834-4 Amd.1 Ed. 1.0 b:2010 Amendment 1 – Recording – Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1125-50 systems) – Part 4: Pack header table and contents ”
IEC 60793-1-31 Ed. 2.0 en:2010 Optical fibres – Part 1-31: Measurement methods and test procedures – Tensile strength
IEC 60793-1-32 Ed. 2.0 en:2010 Optical fibres – Part 1-32: Measurement methods and test procedures – Coating strippability
IEC/TR 62153-4-1 Ed. 2.0 en:2010 Metallic communication cable test methods – Part 4-1: Electromagnetic compatibility (EMC) – Introduction to electromagnetic (EMC) screening measurements
IEC/TR 62617 Ed. 1.0 en:2010 Home laundry appliances – Uncertainty reporting of measurements
IEC 60027-7 Ed. 1.0 b:2010 Letter symbols to be used in electrical technology – Part 7: Power generation, transmission and distribution ”
IEC 60601-2-44 Ed. 3.0 b Cor.1:2010 Corrigendum 1 – Medical electrical equipment – Part 2-44: Particular requirements for the basic safety and essential performance of X-ray equipment for computed tomography
IEC 60695-6-1 Amd.1 Ed. 2.0 b:2010 Amendment 1 – Fire hazard testing – Part 6-1: Smoke obscuration – General guidance
IEC 62599-1 Ed. 1.0 b:2010 Alarm systems – Part 1: Environmental test methods
IEC 62599-2 Ed. 1.0 b:2010 Alarm systems – Part 2: Electromagnetic compatibility – Immunity requirements for components of fire and security alarm systems
IEC 62562 Ed. 1.0 b:2010 Cavity resonator method to measure the complex permittivity of low-loss dielectric plates
IEC 60745-2-14 Amd.2 Ed. 2.0 b:2010 Amendment 2 – Hand-held motor-operated electric tools – Safety – Part 2-14: Particular requirements for planers
IEC 60745-2-19 Amd.1 Ed. 1.0 b:2010 Amendment 1 – Hand-held motor-operated electric tools – Safety – Part 2-19: Particular requirements for jointers
IEC 61029-2-12 Ed. 1.0 b:2010 Safety of transportable motor-operated electric tools – Part 2-12: Particular requirements for threading machines
IEC 60364-4-42 Ed. 3.0 b:2010 Low-voltage electrical installations – Part 4-42: Protection for safety – Protection against thermal effects
IEC 60664-3 Amd.1 Ed. 2.0 b:2010 Amendment 1 – Insulation coordination for equipment within low-voltage systems – Part 3: Use of coating, potting or moulding for protection against pollution”
IEC 60747-1 Amd.1 Ed. 2.0 b:2010 Amendment 1 – Semiconductor devices – Part 1: General
IEC 62415 Ed. 1.0 b:2010 Semiconductor devices – Constant current electromigration test
IEC/PAS 61338-1-5 Ed. 1.0 en:2010 Waveguide type dielectric resonators – Part 1-5: General information and test conditions – Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency
CISPR 11 Ed. 5.1 b:2010 Industrial, scientific and medical equipment – Radio-frequency disturbance characteristics – Limits and methods of measurement
IEC 60364-4-44 Ed. 2.0 b Cor.1:2010 Corrigendum 1 – Low-voltage electrical installations – Part 4-44: Protection for safety – Protection against voltage disturbances and electromagnetic disturbances
IEC 60793-1-30 Ed. 2.0 en:2010 Optical fibres – Part 1-30: Measurement methods and test procedures – Fibre proof test
IEC 61937-11 Ed. 1.0 en:2010 Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 11: MPEG-4 AAC and its extensions in LATM/LOAS
IEC 61937-12 Ed. 1.0 en:2010 Digital audio – Interface for non-linear PCM encoded audio bitstreams applying IEC 60958 – Part 12: Non-linear PCM bitstreams according to the DRA formats
IEC 62106 Ed. 2.0 en Cor.1:2010 Corrigendum 1 – Specification of the Radio Data System (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 MHz to 108,0 MHz ”
IEC/TR 62362 Ed. 1.0 en:2010 Selection of optical fibre cable specifications relative to mechanical, ingress, climatic or electromagnetic characteristics – Guidance”
IEC/TS 61000-3-5 Ed. 2.0 b Cor.2:2010 Corridendum 2 – Electromagnetic compatibility (EMC) – Part 3-5: Limits – Limitation of voltage fluctuations and flicker in low-voltage power supply systems for equipment with rated current greater than 75 A
IEC/TS 62579 Ed. 1.0 en:2010 Multimedia home server systems – Conceptual model for domain management
IEC 61108-3 Ed. 1.0 en:2010 Maritime navigation and radiocommunication equipment and systems – Global navigation satellite systems (GNSS) – Part 3: Galileo receiver equipment – Performance requirements, methods of testing and required test results ”
IEC 62615 Ed. 1.0 b:2010 Electrostatic discharge sensitivity testing – Transmission line pulse (TLP) – Component level
IEC 61010-1 Ed. 3.0 b:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 1: General requirements
IEC 61010-2-030 Ed. 1.0 b:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use – Part 2-030: Particular requirements for testing and measuring circuits
IEC 61207-1 Ed. 2.0 b:2010 Expression of performance of gas analyzers – Part 1: General
IEC 60745-2-17 Ed. 3.0 b:2010 Hand-held motor-operated electric tools – Safety – Part 2-17: Particular requirements for routers and trimmers
IEC 61400-22 Ed. 1.0 b:2010 Wind turbines – Part 22: Conformity testing and certification
IEC 61400-SER Ed. 1.0 b:2010 Wind turbine generator systems – ALL PARTS
IEC/TS 62282-7-1 Ed. 1.0 en:2010 Fuel cell technologies – Part 7-1: Single cell test methods for polymer electrolyte fuel cell (PEFC)
IEC 60684-3-209 Ed. 3.0 b:2010 Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 209: Heat-shrinkable, polyolefin sleeving, general purpose, flame retarded
IEC 60684-3-280 Ed. 1.0 b:2010 Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
IEC 60684-3-281 Ed. 1.0 b:2010 Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive
IEC 60684-3-282 Ed. 1.0 b:2010 Flexible insulating sleeving – Part 3: Specifications for individual types of sleeving – Sheet 282: Heat-shrinkable, polyolefin sleeving – Stress control
IEC/TR 60919-1 Ed. 3.0 en:2010 Performance of high-voltage direct current (HVDC) systems with line-commutated converters – Part 1: Steady-state conditions
IEC/TS 61800-8 Ed. 1.0 en:2010 Adjustable speed electrical power drive systems – Part 8: Specification of voltage on the power interface
IEC 60191-6-18 Ed. 1.0 b Cor.1:2010 Corrigendum 1 – Mechanical stardardization of semiconductor devices – Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages – Design guide for ball grid array (BGA)
IEC 60512-17-1 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 17-1: Cable clamping tests – Test 17a: Cable clamp robustness
IEC 60512-17-3 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 17-3: Cable clamping tests – Test 17c: Cable clamp resistance to cable pull (tensile)
IEC 60512-17-4 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 17-4: Cable clamping tests – Test 17d: Cable clamp resistance to cable torsion
IEC 60512-20-1 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 20-1: Fire hazard tests – Test 20a: Flammability, needle-flame
IEC 60512-20-3 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 20-3: Fire hazard tests – Test 20c: Flammability, glow-wire
IEC 60512-21-1 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 21-1: RF resistance tests – Test 21a: RF shunt resistance
IEC 60512-22-1 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 22-1: Capacitance tests – Test 22a: Capacitance
IEC 60512-23-2 Ed. 1.0 b:2010 Connectors for electronic equipment – Tests and measurements – Part 23-2: Screening and filtering tests – Test 23b: Suppression characteristics of integral filters

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm
http://www.findstandards.info

Quote: Hench2004@sina.com

Sell: BSI Standards page 46 In the Cheapest

July 30th, 2009 | hench2004

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

BS 5954-2:1985, IEC 60297-2:1982 BS 5954-2:1985, IEC 60297-2:1982. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Specification for cabinets and pitches of rack structures
BS 223:1985 BS 223:1985. Specification for bushings for alternating voltages above 1000 V
BS 1133-14:1985 BS 1133-14:1985. Packaging code. Adhesive closing and sealing tapes
BS 1979:1985 BS 1979:1985. Specification for hospital ward bedsteads for psychiatric hospitals
BS 4185-13:1985 BS 4185-13:1985. Machine tool components. Specification for dimensions of counterbored holes
BS 3406-6:1985 BS 3406-6:1985. Methods for determination of particle size distribution. Recommendations for centrifugal liquid sedimentation methods for powders and suspensions
BS 5628-3:1985 BS 5628-3:1985. Code of practice for use of masonry. Materials and components, design and workmanship
BS 4656-34:1985, ISO 6899-1984 BS 4656-34:1985, ISO 6899-1984. Accuracy of machine tools and methods of test. Specification for power presses, mechanical open front type
BS 2484:1985 BS 2484:1985. Specification for straight concrete andclayware cable covers
BS 6228:1985, ISO 6750-1984 BS 6228:1985, ISO 6750-1984. Guide to format and content of manuals on operation and maintenance for earth-moving machinery
BS 1434:1985 BS 1434:1985. Specification for copper for electrical purposes: copper sections in bars, blanks and segments for commutators
BS 3143-1:1985 BS 3143-1:1985. Road danger lamps. Specification for kerosine burning lamps
BS 1749:1985 BS 1749:1985. Recommendations for alphabetical arrangement and the filing order of numbers and symbols
BS 5772:Part 1:1985, IEC 60512-1:1984 BS 5772:Part 1:1985, IEC 60512-1:1984. Specification for electromechanical components for electronic equipment: basic testing procedures and measuring methods. General
BS 6601:1985, ISO 6260-1984 BS 6601:1985, ISO 6260-1984. Specification for mail payment orders
BS 1000[633/635]:1985 BS 1000[633/635]:1985. Universal Decimal Classification. English full edition. Specific crops. Horticulture
BS 2947:1985, ISO 487:1984 BS 2947:1985, ISO 487:1984. Specification for steel roller chains, types S and C, attachments and chain wheels for agricultural and similar machinery
BS 1400:1985 BS 1400:1985. Specification for copper alloy ingots and copper alloy and high conductivity copper castings
BS 1000[663]:1985 BS 1000[663]:1985. Universal Decimal Classification. English full edition. Industrial microbiology. Industrial mycology. Fermentation industry. Beverage industry. Stimulant industry
BS 2011-2.1N:1985, IEC 60068-2-14:1984 BS 2011-2.1N:1985, IEC 60068-2-14:1984. Environmental testing. Tests. Test N. Change of temperature
BS 1230-1:1985 BS 1230-1:1985. Gypsum plasterboard. Specification for plasterboard excluding materials submitted to secondary operations
BS 5803-1:1985 BS 5803-1:1985. Thermal insulation for use in pitched roof spaces in dwellings. Specification for man-made mineral fibre thermal insulation mats
BS 5803-2:1985 BS 5803-2:1985. Thermal insulation for use in pitched roof spaces in dwellings. Specification for man-made mineral fibre thermal insulation in pelleted or granular form for application by blowing
BS 5803-4:1985 BS 5803-4:1985. Thermal insulation for use in pitched roof spaces in dwellings. Methods for determining flammability and resistance to smouldering
BS MA 75-1:1985 BS MA 75-1:1985. Specification for bulkhead pieces and tank pads. Bulkhead pieces of fabricated steel or copper alloy and steel pad pieces
BS MA 98-1:1985, ISO 7607-1984 BS MA 98-1:1985, ISO 7607-1984. Multi-bucket dredgers. Specification for scale of bucket capacities
BS MA 99-1:1985, ISO 6766-1984 BS MA 99-1:1985, ISO 6766-1984. Series 4 shipborne barges. Specification for main dimensions
BS 572:1985 BS 572:1985. Specification for interchangeable conical ground glass joints
BS 3143-4:1985 BS 3143-4:1985. Road danger lamps. Specification for high intensity battery operated beacons
BS 5342:1985 BS 5342:1985. Specification for rubber hoses for high-pressure saturated steam
BS 4185:Part 6:1985 BS 4185:Part 6:1985. Machine tool components. Specification for change gears
BS 3683-4:1985 BS 3683-4:1985. Glossary of terms used in non-destructive testing. Ultrasonic flaw detection
BS 1000[664]:1985 BS 1000[664]:1985. Universal Decimal Classification. English full edition. Preparation and preservation of solid foodstuffs
BS 1780:1985 BS 1780:1985. Specification for bourdon tube pressure and vacuum gauges
BS 3062:1985 BS 3062:1985. Specification for ophthalmic lens materials
BS 3779:1985 BS 3779:1985. Specification for glass and glass polyester fibre woven tapes for electrical purposes
BS 4791:1985 BS 4791:1985. Specification for calorimeter bombs
BS 5268:Part 3:1985 BS 5268:Part 3:1985. Structural use of timber. Code of practice for trussed rafter roofs
BS 5588:Part 2:1985 BS 5588:Part 2:1985. Fire precautions in the design, construction and use of buildings. Code of practice for shops
BS 5628:Part 2:1985 BS 5628:Part 2:1985. Code of practice for use of masonry. Structural use of reinforced and prestressed masonry
BS 6561:1985 BS 6561:1985. Specification for zinc alloy sheet and strip for building
BS 6625:Part 1:1985 BS 6625:Part 1:1985. Spectacle frames. Specification for general requirements
BS 6036:1985 BS 6036:1985. Method for determination of the edgewise crush resistance of corrugated fibreboard
BS 2481-4:1985, ISO 5138/9-1984 BS 2481-4:1985, ISO 5138/9-1984. Typewriters. Glossary of terms
BS 5479-4:1985 BS 5479-4:1985. Duplicators and document copying machines. Glossary of terms for document copying machines
BS 6789-3.1:1985 BS 6789-3.1:1985. Apparatus with one or more particular functions for connection to the British Telecommunications public switched telephone network. Apparatus with auto-calling, auto-answering and auto-clearing facilities. Specification for auto-calling facilities
BS 4509:1985, IEC 60770:1984 BS 4509:1985, IEC 60770:1984. Methods for evaluating the performance of transmitters for use in industrial-process control systems
BS M 56:1985, ISO 7258:1984 BS M 56:1985, ISO 7258:1984. Methods for determination of density and relative density of polytetrafluoroethylene (PTFE) tubing for aerospace applications
BS M 57:1985, ISO 7313-1984 BS M 57:1985, ISO 7313-1984. Specification for high temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) for aerospace applications
BS 1751:1985 BS 1751:1985. Specification for dimensional requirements for general purpose glass stopcocks of the interchangeable straight bore type
BS 3762-3.12:1985 BS 3762-3.12:1985. Analysis of formulated detergents. Quantitative test methods. Method for determination of ammonia content
BS 4285-3.11:1985 BS 4285-3.11:1985. Microbiological examination for dairy purposes. Methods for detection and/or enumeration of specific groups of microorganisms. Detection and enumeration of faecal streptococci
BS 879-1:1985 BS 879-1:1985. Water well casing. Specification for steel tubes for casing
BS 3683-1:1985 BS 3683-1:1985. Glossary of terms used in non-destructive testing. Penetrant flaw detection
BS MA 2-4:1985 BS MA 2-4:1985. Magnetic compasses and binnacles. Glossary of terms
BS 8301:1985 BS 8301:1985. Code of practice for building drainage
BS 1384-1:1985, ISO 5-1:1984 BS 1384-1:1985, ISO 5-1:1984. Photographic density measurements. Guide for terms, symbols and notations
BS 3459:1985 BS 3459:1985. Specification for stands for drawing boards
BS 2SP 168-169:1985 BS 2SP 168-169:1985. Specification for ferrules and assembly wires for braided rubber cord assemblies for aerospace use
BS 6585:1985, ISO 7535-1984 BS 6585:1985, ISO 7535-1984. Guide for comparative testing of performance of detergents for domestic machine dishwashing
BS 6591:1985, ISO 5612-1984 BS 6591:1985, ISO 5612-1984. Specification for scraper bars for chain conveyors for mining
BS 6592:1985, ISO 5613-1984 BS 6592:1985, ISO 5613-1984. Specification for drive sprocket assemblies for chain conveyors for mining
BS 6607-1:1985, ISO 7388-1:1983 BS 6607-1:1985, ISO 7388-1:1983. Tool shanks with 7/24 taper for automatic tool changers. Specification for shanks Nos. 40, 45, and 50
BS 6607-2:1985, ISO 7388-2:1984 BS 6607-2:1985, ISO 7388-2:1984. Tool shanks with 7/24 taper for automatic tool changers. Specification for retention knobs for shanks Nos. 40, 45 and 50
BS 6404:Part 2:1985 BS 6404:Part 2:1985. Magnetic materials. Methods of measurement of magnetic, electrical and physical properties of magnetic sheet and strip
BS 6200-3.1.5:1985, ISO 4139:1979 BS 6200-3.1.5:1985, ISO 4139:1979. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of aluminium. Ferrosilicon: atomic absorption spectrometric method
BS 6200-3.10.4:1985, ISO 4140:1979 BS 6200-3.10.4:1985, ISO 4140:1979. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of chromium. Ferrochromium and ferrosilicochromium: potentiometric method
BS 6200-3.18.3:1985, EN 24159:1989,ISO 4159:1978 BS 6200-3.18.3:1985, EN 24159:1989,ISO 4159:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of manganese. Ferromanganese and ferrosilicomanganese: potentiometric method
BS 6200-3.18.2:1985, ISO 629:1982 BS 6200-3.18.2:1985, ISO 629:1982. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of manganese. Steel: spectrophotometric method
BS 6200-3.19.1:1985, ISO 4941:1978 BS 6200-3.19.1:1985, ISO 4941:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of molybdenum. Steel and cast iron: photometric method
BS 6200-3.22.2:1985, ISO 4945:1977 BS 6200-3.22.2:1985, ISO 4945:1977. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nitrogen. Steel: spectrophotometric method
BS 6200-3.26.5:1985, ISO 4158:1978 BS 6200-3.26.5:1985, ISO 4158:1978. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of silicon. Ferrosilicon, ferrosilicomanganese and ferrosilicochromium: gravimetric method
BS 6200-3.28.1:1985, EN 24934:1989,ISO 4934:1980 BS 6200-3.28.1:1985, EN 24934:1989,ISO 4934:1980. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of sulphur. Steel and cast iron: gravimetric method
BS 6200-3.33.3:1985, ISO 7693:1984 BS 6200-3.33.3:1985, ISO 7693:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tungsten. Ferrotungsten: gravimetric method
BS 6200-3.34.4:1985, ISO 6467:1980 BS 6200-3.34.4:1985, ISO 6467:1980. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of vanadium. Ferrovanadium: potentiometric method
BS 6598:1985, ISO 4695-1984 BS 6598:1985, ISO 4695-1984. Method for determination of reducibility of iron ores
BS 6599:1985, ISO 4700:1983 BS 6599:1985, ISO 4700:1983. Method for determination of crushing strength of iron ore pellets
BS 4840-1:1985 BS 4840-1:1985. Rigid polyurethane (PUR) foam in slab form. Specification for PUR foam for use in transport containers and insulated vehicle bodies
BS 6572:1985 BS 6572:1985. Specification for blue polyethylene pipes up to nominal size 63 for below ground use for potable water
BS 6597:1985, ISO 1307-1983 BS 6597:1985, ISO 1307-1983. Specification for rubber and plastics hoses: internal diameters and tolerances and tolerances on length
BS 6577:1985 BS 6577:1985. Specification for mastic asphalt for building (natural rock asphalt aggregate)
BS 6566:Part 4:1985 BS 6566:Part 4:1985. Plywood. Specification for tolerances on the dimensions of plywood panels
BS 6566:Part 5:1985 BS 6566:Part 5:1985. Plywood. Specification for moisture content
BS 6566:Part 7:1985 BS 6566:Part 7:1985. Plywood. Specification for classification of resistance to fungal decay and wood borer attack
BS 6566:Part 8:1985 BS 6566:Part 8:1985. Plywood. Specification for bond performance of veneer plywood
BS AU 201:Part 1:1985, ISO 7588-1983 BS AU 201:Part 1:1985, ISO 7588-1983. Relays and flashers. Specification for mounting and positioning dimensions of male tabs and socket apertures for relays and flashers for road vehicles
BS 6492:Part 2:1985 BS 6492:Part 2:1985. Transportable accommodation units. Recommendations for transportation and siting, with guidance on occupancy
BS 6557:1985 BS 6557:1985. Specification for kettles
BS 6595:1985 BS 6595:1985. Specification for safety requirements for baby nests
BS 6608:1985 BS 6608:1985. Specification for cattle hide leathers for upholstered furniture
BS 6563:1985 BS 6563:1985. Method for determination of the roughness of paper and board by the Parker Print-surf apparatus
BS 6499:1985 BS 6499:1985. Specification for metal screw necks, screw caps and inner seals for metal containers
BS 812-106:1985 BS 812-106:1985. Testing aggregates. Method for determination of shell content in coarse aggregate
BS 1902:Part 5:Section 5.6:1985 BS 1902:Part 5:Section 5.6:1985. Methods of testing refractory materials. Refractory and thermal properties. Determination of thermal conductivity (hot wire method) (method 1902-506)
BS 3056-4:1985, ISO 5019-4:1984 BS 3056-4:1985, ISO 5019-4:1984. Sizes of refractory bricks. Specification for bricks for electric arc furnace roofs
BS EN ISO 6860:1995, BS 3900-E11:1985 BS EN ISO 6860:1995, BS 3900-E11:1985. Paints and varnishes. Bend test (conical mandrel)
BS 3900-F10:1985 BS 3900-F10:1985. Methods of test for paints. Determination of resistance to cathodic disbonding of coatings for use in marine environments
BS 3900-F11:1985 BS 3900-F11:1985. Methods of test for paint. Durability tests on paint films. Determination of resistance to cathodic disbonding of coatings for use on land-based buried structures
BS 6483-2:1985, ISO 5690-2:1984 BS 6483-2:1985, ISO 5690-2:1984. Fertilizer distributors. Method of test for fertilizer distributors in lines
BS 6550:1985, ISO 6720-1981 BS 6550:1985, ISO 6720-1981. Recommendation for working widths of equipment for sowing, planting, distributing fertilizers and spraying
BS 6611:1985 BS 6611:1985. Guide to evaluation of the response of occupants of fixed structures, especially buildings and offshore structures, to low-frequency horizontal motion (0.063 Hz to 1 Hz)
BS 6615:1985, ISO 8062-1984 BS 6615:1985, ISO 8062-1984. Specification for dimensional tolerances for metal and metal alloy castings
BS 6374-1:1985 BS 6374-1:1985. Lining of equipment with polymeric materials for the process idustries. Specification for lining with sheet thermoplastics
BS 6590:1985, ISO 6898-1984 BS 6590:1985, ISO 6898-1984. Specification for capacity ratings and dimensions of power presses, mechanical open front type
BS 6583:1985 BS 6583:1985. Methods for volumetric testing for rating of fan sections in central station air handling units (including guidance on rating)
BS 4831:1985, ISO 1082-1984 BS 4831:1985, ISO 1082-1984. Specification for shackle type connector units for chain conveyors for mining
BS 6575:1985 BS 6575:1985. Specification for fire blankets
BS 4727-2:Group 10:1985 BS 4727-2:Group 10:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Industrial electroheating terminology
BS 5724-2.6:1985, IEC 60601-2-6:1984 BS 5724-2.6:1985, IEC 60601-2-6:1984. Medical electrical equipment. Particular requirements for safety. Specification for microwave therapy equipment
BS 6083-8:1985, IEC 60118-8:1983 BS 6083-8:1985, IEC 60118-8:1983. Hearing aids. Methods for measurement of the performance characteristics of hearing aids under simulated in situ working conditions
BS 6100-1.6:1985 BS 6100-1.6:1985. Glossary of building and civil engineering terms. General and miscellaneous. Persons
BS 6100-3.4:1985 BS 6100-3.4:1985. Glossary of building and civil engineering terms. Services. Lighting
BS 1704:1985, ISO 1770:1981 BS 1704:1985, ISO 1770:1981. Specification for solid-stem general purpose thermometers
BS 1384:Part 3:1985, ISO 5/3-1984 BS 1384:Part 3:1985, ISO 5/3-1984. Photographic density measurements. Specification for spectral conditions
BS 1384:Part 4:1985, ISO 5/4-1983 BS 1384:Part 4:1985, ISO 5/4-1983. Photographic density measurements. Specification for geometric conditions for reflection density
BS 1902-4.3:1985 BS 1902-4.3:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of cold crushing strength of dense shaped products (method 1902-403)
BS 4928:1985 BS 4928:1985. Specification for man-made fibre ropes
BS 4181-1:1985, ISO 4650-1984 BS 4181-1:1985, ISO 4650-1984. Identification of rubbers by infra-red spectrometry. Method for identification of hydrocarbon, chloroprene, nitrile and chlorosulphonated polyethylene rubbers
BS 6551:1985 BS 6551:1985. Specification for polyester fibre woven tapes for electrical purposes
BS 6604:1985 BS 6604:1985. Code of practice for safe operation of starter batteries
BS 6541:1985, ISO 7064-1983 BS 6541:1985, ISO 7064-1983. Specification for check character systems for use in information interchange, and guidance on choice and methods of application
BS 3939:Part 2:1985, IEC 60617-2:1983 BS 3939:Part 2:1985, IEC 60617-2:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Symbol elements, qualifying symbols and other symbols having general application
BS 3939:Part 3:1985, IEC 60617-3:1983 BS 3939:Part 3:1985, IEC 60617-3:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Conductors and connecting devices
BS 3939:Part 4:1985, IEC 60617-4:1983 BS 3939:Part 4:1985, IEC 60617-4:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Passive components
BS 3939:Part 5:1985, IEC 60617-5:1983 BS 3939:Part 5:1985, IEC 60617-5:1983. Graphical symbols for electrical power, telecommunications and electronics diagrams. Semiconductors and electron tubes
BS 3894-2:1985, ISO 2566/2-1984 BS 3894-2:1985, ISO 2566/2-1984. Method for converting elongation values for steel. Method of conversion for application to austenitic steels
BS 4870-3:1985 BS 4870-3:1985. Specification for approval testing of welding procedures. Arc welding of tube to tube-plate joints in metallic materials
BS 4871-3:1985 BS 4871-3:1985. Specification for approval testing of welders working to approved welding procedures. Arc welding of tube to tube-plate joints in metallic materials
BS 5600-2.6:1985 BS 5600-2.6:1985. Powder metallurgical materials and products. Methods of sampling and testing metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter)
BS 5655-9:1985 BS 5655-9:1985. Lifts and service lifts. Specification for guide rails
BS 6270-2:1985 BS 6270-2:1985. Code of practice for cleaning and surface repair of buildings. Concrete and precast concrete masonry
BS 6536:1985 BS 6536:1985. Specification for continuously hot-dip aluminium/silicon coated cold reduced carbon steel sheet and strip
BS 6582:1985 BS 6582:1985. Specification for continuously hot-dip lead alloy (terne) coated cold reduced carbon steel flat rolled products
BS 5724-2.5:1985, IEC 60601-2-5:1984 BS 5724-2.5:1985, IEC 60601-2-5:1984. Medical electrical equipment. Particular requirements for safety. Specification for safety of ultrasonic therapy equipment
BS 1380:Part 5:1985, ISO 7187-1983 BS 1380:Part 5:1985, ISO 7187-1983. Speed of sensitized photographic materials. Method for determining the speed of direct positive colour print camera materials
BS 1743-19:1985 BS 1743-19:1985. Methods for analysis of dried milk and dried milk products. Determination of scorched particles content
BS 2000-364:1985 BS 2000-364:1985. Methods of test for petroleum and its products. Calculated cetane index of diesel fuels (range below 55)
BS 3424-14:1985 BS 3424-14:1985. Testing coated fabrics. Method 16. Methods for determination of colour fastness to wet and dry rubbing and determination of resistance to printwear
BS 4656-33:1985, ISO 7572:1984 BS 4656-33:1985, ISO 7572:1984. Accuracy of machine tools and methods of test. Specification for floor plates
BS 4753:Part 5:1985, ISO 5250-1982 BS 4753:Part 5:1985, ISO 5250-1982. Dyeing and finishing machines. Glossary of terms for stenters
BS 5131-1.9:1985 BS 5131-1.9:1985. Methods of test for footwear and footwear materials. Adhesives. Measurement of green strength of adhesive joints
BS 6319-7:1985 BS 6319-7:1985. Testing of resin and polymer/cement compositions for use in construction. Method for measurement of tensile strength
BS 6246:Part 3:1985 BS 6246:Part 3:1985. Industrial laundry machinery. Methods for the assessment of the effect of flatwork ironing machines on textiles
BS 6493-1.8:1985, IEC 60747-8:1984 BS 6493-1.8:1985, IEC 60747-8:1984. Semiconductor devices. Discrete devices. Recommendations for field-effect transistors
BS AU 50-2.8a:1985 BS AU 50-2.8a:1985. Tyres and wheels. Wheels and rims. Code of practice for the selection and care of wheels for passenger cars (including caravans and light trailers)
BS AU 174-2:1985, ISO 4925:1978 BS AU 174-2:1985, ISO 4925:1978. Hydraulic brake systems, using non-petroleum base brake fluids for road vehicles. Specification for non-petroleum base brake fluid
PD 6461:Part 1:1985 PD 6461:Part 1:1985. Vocabulary of metrology. Basic and general terms (international)
BS 2789:1985 BS 2789:1985. Specification for spheroidal graphite or nodular graphite cast iron
BS 3469:1985, ISO 1224-1984 BS 3469:1985, ISO 1224-1984. Specification for instrument precision rolling bearings (ball bearings)
BS 5117-1.1:1985 BS 5117-1.1:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for determination of physical and chemical properties. Ancillary procedures
BS 5117-1.2:1985 BS 5117-1.2:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for determination of physical and chemical properties. Determination of boiling point
BS 5117-1.3:1985 BS 5117-1.3:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for determination of physical and chemical properties. Determination of freezing point
BS 5117-1.4:1985 BS 5117-1.4:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for determination of physical and chemical properties. Determination of foaming characteristics
BS 5117-2.1:1985 BS 5117-2.1:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for corrosion inhibition performance. General procedures
BS 5117-2.2:1985 BS 5117-2.2:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for corrosion inhibition performance. Glassware tests
BS 5117-2.4:1985 BS 5117-2.4:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for corrosion inhibition performance. Static engine test
BS 5117-2.5:1985 BS 5117-2.5:1985. Testing corrosion inhibiting, engine coolant concentrate (‘antifreeze’). Methods of test for corrosion inhibition performance. Field test
BS 5274:1985 BS 5274:1985. Specification for fire hose reels (water) for fixed installations
BS 6600-10:1985 BS 6600-10:1985. Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Specification for the outline dimensions of transformers and inductors using the Q range of C-cores
BS 6612:1985 BS 6612:1985. Specification for graduated compression hosiery
BS 8200:1985 BS 8200:1985. Code of practice for design of non-loadbearing external vertical enclosures of buildings
BS AU 88a:1985 BS AU 88a:1985. Recommendations for ratings for light duty cables for automobile use
BS AU 202a:1985 BS AU 202a:1985. Specification for rearward-facing restraining devices for infants for use in road vehicles
BS 6043-2.1:1985, ISO 6375-1980 BS 6043-2.1:1985, ISO 6375-1980. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Sampling
BS 6043-2.2:1985, ISO 8005-1984 BS 6043-2.2:1985, ISO 8005-1984. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of ash content of green and calcined cokes
BS 6618:1985, ISO 5990-1983 BS 6618:1985, ISO 5990-1983. Specification for photographic grade potassium sulphite, 650 g/L aqueous solution
BS 846:1985 BS 846:1985. Specification for burettes
BS 4F 59:1985 BS 4F 59:1985. Specification for braided linen (flax) cord for aerospace purposes
BS 5626-3.2:1985, IEC 60554-3-2:1983 BS 5626-3.2:1985, IEC 60554-3-2:1983. Cellulosic papers for electrical purposes. Specification for individual materials. Capacitor paper
BS 812-119:1985 BS 812-119:1985. Testing aggregates. Method for determination of acid-soluble material in fine aggregate
BS 1902:Part 3:Section 3.13:1985 BS 1902:Part 3:Section 3.13:1985. Methods of testing refractory materials. General and textural properties. Measurement of corner and edge defects and other surface imperfections of refractory bricks and blocks (attributive properties) (method 1902-313)
BS 1902-4.6:1985 BS 1902-4.6:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
BS 1902:Part 4:Section 4.7:1985 BS 1902:Part 4:Section 4.7:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of resistance to abrasion at elevated temperature up to 1400°C (abradability index at elevated temperatures) (method 1902-407)
BS 1902:Part 4:Section 4.9:1985 BS 1902:Part 4:Section 4.9:1985. Methods of testing refractory materials. Properties measured under an applied stress. Determination of refractoriness-under-load (rising temperature test: differential method) (method 1902-409)
BS 5724-2.4:1985, IEC 60601-2-4:1983 BS 5724-2.4:1985, IEC 60601-2-4:1983. Medical electrical equipment. Particular requirements for safety. Specification for cardiac defibrillators and cardiac defibrillator-monitors
BS 5944-5:1985 BS 5944-5:1985. Measurement of airborne noise from hydraulic fluid power systems and components. Simplified method of determining sound power levels from pumps using an anechoic chamber
BS 6374-5:1985 BS 6374-5:1985. Lining of equipment with polymeric materials for the process industries. Specification for lining with rubbers
BS 5131-4.18:1985 BS 5131-4.18:1985. Methods of test for footwear and footwear materials. Other components. Longitudinal stiffness of steel shanks
BS 1041-2.1:1985 BS 1041-2.1:1985. Code for temperature measurement. Expansion thermometers. Guide to selection and use of liquid-in-glass thermometers
BS 1610:Part 2:1985 BS 1610:Part 2:1985. Materials testing machines and force verification equipment. Specification for the grading of equipment used for the verification of the forces applied by materials testing machines
BS 6613:1985, ISO 4863-1984 BS 6613:1985, ISO 4863-1984. Methods for specifying characteristics of resilient shaft couplings
BS 4148:1985, ISO 4-1984 BS 4148:1985, ISO 4-1984. Specification for abbreviation of title words and titles of publications
BS 6619:1985, ISO 7830-1983 BS 6619:1985, ISO 7830-1983. Specification for flammability performance of safety film for still photography
BS 6643-1:1985 BS 6643-1:1985. Recharging fire extinguishers (manufactured to BS 5423 ‘Specification for portable fire extinguishers’). Specification for procedure and materials
BS 6643-2:1985 BS 6643-2:1985. Recharging fire extinguishers (manufactured to BS 5423 ‘Specification for portable fire extinguishers’). Specification for powder refill charges
BS 6621:1985, ISO 5687-1981 BS 6621:1985, ISO 5687-1981. Method for determination of combine harvester capacity and unloading rate
BS 6630:1985, ISO 4645-1984 BS 6630:1985, ISO 4645-1984. Method for identification of antidegradants in rubber and rubber products by thin layer chromatography
BS 6632:1985, ISO 4867-1984 BS 6632:1985, ISO 4867-1984. Method for measurement and reporting of shipboard vibration data
BS 6633:1985, ISO 4868-1984 BS 6633:1985, ISO 4868-1984. Method for measurement and reporting of local vibration data of ship structures and equipment
BS 812-103.1:1985 BS 812-103.1:1985. Testing aggregates. Method for determination of particle size distribution. Sieve tests
BS AU 201-2:1985, ISO 7880-1984 BS AU 201-2:1985, ISO 7880-1984. Relays and flashers. Specification for arrangement and functional attribution of relay terminals for road vehicles
BS 5053:1985 BS 5053:1985. Methods of test for cordage and webbing slings and for fibre cores for wire ropes
BS 5306-3:1985 BS 5306-3:1985. Fire extinguishing installations and equipment on premises. Code of practice for selection, installation and maintenance of portable fire extinguishers
BS 6627:1985, ISO 5123-1984 BS 6627:1985, ISO 5123-1984. Recommendations for presentation of headers for microfiche of monographs and serials
BS 6631:1985, ISO 6807-1984 BS 6631:1985, ISO 6807-1984. Specification for rubber hoses and hose assemblies for rotary drilling and vibration applications
BS 5649-7:1985 BS 5649-7:1985. Lighting columns. Method for verification of structural design by calculation
BS 770-9:1985, ISO 4099:1984 BS 770-9:1985, ISO 4099:1984. Methods for chemical analysis of cheese. Determination of nitrate and nitrite contents. Cadmium reduction and photometry method
BS CECC 00012:1985 BS CECC 00012:1985. Harmonized system of quality assessment for electronic components: basic specification: radiographic inspection of electronic components
BS CECC 00013:1985 BS CECC 00013:1985. Harmonized system of quality assessment for electronic components: basic specification: scanning electron microscope inspection of semiconductor dice
BS 3567:1985 BS 3567:1985. Code of practice for preparation of flowsheets for the design of coal preparation plant
BS 5576:1985 BS 5576:1985. Specification for safety features of camping tents, awnings, trailer tents and caravan awnings
BS 5617:1985 BS 5617:1985. Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves
BS 5618:1985 BS 5618:1985. Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems
BS 6474:Part 2:1985, ISO 5428-1984 BS 6474:Part 2:1985, ISO 5428-1984. Coded character sets for bibliographic information interchange. Specification for Greek alphabet coded character set
BS 8208-1:1985 BS 8208-1:1985. Guide to assessment of suitability of external cavity walls for filling with thermal insulants. Existing traditional cavity construction
BS 3951-1.2:1985, ISO 1161-1984 BS 3951-1.2:1985, ISO 1161-1984. Freight containers. General. Specification for corner fittings for series 1 freight containers
BS 3958-3:1985 BS 3958-3:1985. Thermal insulating materials. Metal mesh faced man-made mineral fibre mattresses
BS 6462:1985 BS 6462:1985. Specification for mechanical performance of peg-type casement stays and face-fixed wedge-action fasteners
BS 6634:1985, ISO 6954-1984 BS 6634:1985, ISO 6954-1984. Guide for overall evaluation of vibration in merchant ships
BS 6637:1985, ISO 445-1984 BS 6637:1985, ISO 445-1984. Glossary of terminology for pallets for materials handling
BS 8207:1985 BS 8207:1985. Code of practice for energy efficiency in buildings
BS 6624:1985 BS 6624:1985. Specification for personal weighing machines for domestic use
BS 6628:1985, IEC 60806:1984 BS 6628:1985, IEC 60806:1984. Method for determination of the maximum symmetrical radiation field from a rotating anode X-ray tube for medical diagnosis
BS 6635:1985 BS 6635:1985. Specification for saddle trees made from wood
DD 116:1985 DD 116:1985. Open Systems Interconnection: transport protocol specification (ISO/DIS 8073 and DAD 1)
PP 7314:1985 PP 7314:1985. Projection systems compared
PP 7309:1985 PP 7309:1985. An introduction to the tolerancing of functional length dimensions
BS 21:1985 BS 21:1985. Specification for pipe threads for tubes and fittings where pressure-tight joints are made on the threads (metric dimensions)
BS 1597:1985 BS 1597:1985. Specification for limits and methods of measurement of electromagnetic interference generated by marine equipment and installations
BS 1902-5.9:1985 BS 1902-5.9:1985. Methods of testing refractory materials. Refractory and thermal properties. Determination of permanent change in dimensions on heating of shaped insulating products (method 1902-509)
BS 4570:1985 BS 4570:1985. Specification for fusion welding of steel castings
BS 4664:1985 BS 4664:1985. Methods for sampling and cutting specimens of textile floor coverings for physical tests
BS 4727-2:Group 06:1985 BS 4727-2:Group 06:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to power engineering. Switchgear and controlgear terminology (including fuse terminology)
BS 4727-1:Group 05:1985 BS 4727-1:Group 05:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Semiconductor terminology
BS CECC 41101-007:1985 BS CECC 41101-007:1985. Harmonized blank detail specification for lead screw actuated non-wirewound preset potentiometers. Square form, container sealed, actuating device insulated from resistive element, slipping clutch at each end of travel, rigid terminations. Assessment level S.
BS 4875-1:1985 BS 4875-1:1985. Strength and stability of furniture. Methods for determination of strength of chairs and stools
BS 4875:Part 2:1985 BS 4875:Part 2:1985. Strength and stability of furniture. Methods for determination of stability of chairs and stools
BS 4875-3:1985 BS 4875-3:1985. Strength and stability of furniture. Methods for determination of strength of settees
BS 4875:Part 4:1985 BS 4875:Part 4:1985. Strength and stability of furniture. Methods for determination of stability of settees
BS 4875-5:1985 BS 4875-5:1985. Strength and stability of furniture. Methods for determination of strength of tables and trolleys
BS 4875-6:1985 BS 4875-6:1985. Strength and stability of furniture. Methods for determination of stability of tables and trolleys
BS 4875:Part 7:1985 BS 4875:Part 7:1985. Strength and stability of furniture. Methods for determination of strength of storage furniture
BS 4875:Part 8:1985 BS 4875:Part 8:1985. Strength and stability of furniture. Methods for determination of stability of storage furniture
BS 5131-4.20:1985 BS 5131-4.20:1985. Methods of test for footwear and footwear materials. Other components. Force required to pull heel pins out of shoe heels
BS EN 26801:1993, ISO 6801-1983 BS EN 26801:1993, ISO 6801-1983. Rubber or plastics hoses. Determination of volumetric expansion
BS EN 21746:1993, ISO 1746-1983 BS EN 21746:1993, ISO 1746-1983. Rubber or plastics hoses and tubing. Bending tests
BS 5793-3.2:1985, IEC 60534-3-2:1984 BS 5793-3.2:1985, IEC 60534-3-2:1984. Industrial-process control valves. Dimensions. Specification for face-to-face dimensions for flangeless control valves except wafer butterfly valves
BS 5834-1:1985 BS 5834-1:1985. Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for guards, including foundation units
BS 5873-3:1985 BS 5873-3:1985. Educational furniture. Specification for strength and stability of tables for educational institutions
BS 6133:1985 BS 6133:1985. Code of practice for safe operation of lead-acid stationary cells and batteries
BS 6467-1:1985 BS 6467-1:1985. Electrical apparatus with protection by enclosure for use in the presence of combustible dusts. Specification for apparatus
BS 6642:1985 BS 6642:1985. Specification for disposable plastics refuse sacks made from polyethylene
BS 8110:Part 1:1985 BS 8110:Part 1:1985. Structural use of concrete. Code of practice for design and construction
BS 8206-1:1985 BS 8206-1:1985. Lighting for buildings. Code of practice for artificial lighting
BS 9721:1985 BS 9721:1985. Sectional specification for signal transformers of assessed quality for use in electronic equipment for capability approval
BS 6723:1985, ISO 5964-1985 BS 6723:1985, ISO 5964-1985. Guide to establishment and development of multilingual thesauri
BS 1387:1985 BS 1387:1985. Specification for screwed and socketed steel tubes and tubulars and for plain end steel tubes suitable for welding or for screwing to BS 21 pipe threads
BS 6617-1:1985 BS 6617-1:1985. Determination of decarburization in steel. Methods for determining decarburization by microscopic and micro-hardness techniques
BS 6647:1985, IEC 60790:1984 BS 6647:1985, IEC 60790:1984. Guide to oscilloscopes and peak voltmeters for impulse tests
BS 3221-1:1985 BS 3221-1:1985. Medicine measures. Specification for medicine measures of 50 ml total graduated capacity
BS 3158:1985 BS 3158:1985. Specification for rubber hoses and hose assemblies for aircraft ground fuelling and defuelling
BS 4828:1985, IEC 60270:1981 BS 4828:1985, IEC 60270:1981. Guide for partial discharge measurements
BS 6328-1:1985 BS 6328-1:1985. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to speechband circuits
BS 6328-2:1985 BS 6328-2:1985. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to baseband circuits
BS 6328-4:1985 BS 6328-4:1985. Apparatus for connection to private circuits run by certain public telecommunication operators. Specification for apparatus for connection to telegraph circuits using SCVF signalling
BS 3N 100:1985 BS 3N 100:1985. Specification for general design requirements for aircraft oxygen systems and equipment
BS QC 300201:1985, IEC 60384-15-3:1984,QC 300201 BS QC 300201:1985, IEC 60384-15-3:1984,QC 300201. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with solid electrolyte and porous anode. Assessment level E
BS QC 300202:1985, IEC 60384-15-2:1984,QC 300202 BS QC 300202:1985, IEC 60384-15-2:1984,QC 300202. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte and porous anode. Assessment level E
BS QC 300203:1985, IEC 60384-15-1,QC 300203 BS QC 300203:1985, IEC 60384-15-1,QC 300203. Specification for harmonized system of quality assessment for electronic components. Fixed capacitors for use in electronic equipment. Blank detail specification: fixed tantalum capacitors with non-solid electrolyte and foil electrode. Assessment level E
BS CECC 30401:1985 BS CECC 30401:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
BS 684:Part 1:Section 1.1:1985 BS 684:Part 1:Section 1.1:1985. Methods of analysis of fats and fatty oils. Physical methods. Determination of litre weight in air
BS 1000[33]:1985 BS 1000[33]:1985. Universal Decimal Classification. English full edition. Economics
BS 3591:1985 BS 3591:1985. Specification for industrial methylated spirits
BS 4727-5:Group 01:1985 BS 4727-5:Group 01:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to electromedical equipment. Radiology and radiological physics terminology
BS 4736:1985, ISO 7771-1985 BS 4736:1985, ISO 7771-1985. Method for determination of dimensional changes of fabrics induced by cold-water immersion
BS 5834-3:1985 BS 5834-3:1985. Surface boxes, guards and underground chambers for gas and waterworks purposes. Specification for large surface boxes
BS 6458-2.3:1985, IEC 60695-2-3:1984 BS 6458-2.3:1985, IEC 60695-2-3:1984. Fire hazard testing for electrotechnical products. Test methods. Bad-connection test with heaters
BS 6641:1985, IEC 60788:1984 BS 6641:1985, IEC 60788:1984. Glossary of medical radiology terms
BS 6653:1985, IEC 60776:1983 BS 6653:1985, IEC 60776:1983. Method for expression of the properties of logic analyzers
BS 6683:1985 BS 6683:1985. Guide to installation and use of valves
BS AU 163a:1985, ISO 3583-1984 BS AU 163a:1985, ISO 3583-1984. Specification for pressure test connection for compressed-air pneumatic braking equipment for road vehicles
BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984 BS 9940-05.01:1985, IEC 60115-7-1:1984,QC 400501:1984. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Blank detail specification: fixed resistor networks in which not all resistors are individually measurable. Assessment level E
BS CECC 63200:1985 BS CECC 63200:1985. Harmonized system of quality assessment for electronic components: sectional specification: film and hybrid integrated circuits (capability approval)
BS CECC 63201:1985 BS CECC 63201:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: film and hybrid integrated circuits (capability approval)
BS CECC 90000:1985 BS CECC 90000:1985. Harmonized system of quality assessment for electronic components. Generic specification: monolithic integrated circuits
BS EN 190102:1994 BS EN 190102:1994. Specification for harmonized system of quality assessment for electronic components. Family specification: digital integrated TTL-SCHOTTKY circuits, series 54S, 64S, 74S, 84S
BS CECC 90203:1985 BS CECC 90203:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated analogue switching circuits
BS CECC 90301:1985 BS CECC 90301:1985. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated line transmitters and receivers
BS 541:1985 BS 541:1985. Method for determination of the Rideal-Walker coefficient of disinfectants
BS 3683-2:1985 BS 3683-2:1985. Glossary of terms used in non-destructive testing. Magnetic particle flaw detection
BS 5237:1985 BS 5237:1985. Specification for lifting twistlocks
BS 6559:1989, HD 1/160 BS 6559:1989, HD 1/160. Guide. General introductory document on European (or CEN) methods of test for wood preservatives
BS AU 50:Part 3:Section 1a:1985 BS AU 50:Part 3:Section 1a:1985. Tyres and wheels. Valves. Specification for valve dimensions
BS 5817-14:1985 BS 5817-14:1985. Specification for audiovisual, video and television equipment and systems. Specification for audio striped card system
BS 6340-3:1985 BS 6340-3:1985. Shower units. Specification for prefabricated shower enclosures and shower cabinets
BS 5817:Part 15:1985, IEC 60574-15:1984 BS 5817:Part 15:1985, IEC 60574-15:1984. Specification for audiovisual, video and television equipment and systems. Specification for audio pages
BS 308-2:1985 BS 308-2:1985. Engineering drawing practice. Recommendations for dimensioning and tolerancing of size
BS 4742-3:1985, ISO 5670-1984 BS 4742-3:1985, ISO 5670-1984. Hydraulic equipment for agricultural machinery. Specification for dimensions and pressure rating of single-acting telescopic tipping cylinders for trailers
BS 4742-4:1985, ISO 5676-1983 BS 4742-4:1985, ISO 5676-1983. Hydraulic equipment for agricultural machinery. Specification for hydraulic couplings on braking systems for trailers and trailed equipment
BS 4742-5:1985, ISO 5669-1982 BS 4742-5:1985, ISO 5669-1982. Hydraulic equipment for agricultural machinery. Specification for dimensions of braking cylinders for trailers and trailed equipment
BS 6161-11:1985 BS 6161-11:1985. Methods of test for anodic oxidation coatings on aluminium and its alloys. Measurement of total reflectance using a photoelectric reflectometer
BS 6626:1985 BS 6626:1985. Code of practice for maintenance of electrical switchgear and controlgear for voltages above l kV and up to and including 36 kV
BS 6645:1985 BS 6645:1985. Method for determination of alkali solubility of flax materials
BS 6646:1985 BS 6646:1985. Method for determination of ash of textiles
BS MA 2-8:1985 BS MA 2-8:1985. Magnetic compasses and binnacles. Specification for transmitting systems and off-course alarms for class A magnetic compasses
BS A 295:1985, ISO 7481-1984 BS A 295:1985, ISO 7481-1984. Methods of test for self-locking nuts with maximum operating temperature less than or equal to 425°C
BS 507:1985 BS 507:1985. Specification for ethanol for industrial use
BS 3921:1985 BS 3921:1985. Specification for clay bricks
BS 5156:1985 BS 5156:1985. Specification for diaphragm valves
BS 5415-1:1985 BS 5415-1:1985. Safety of electrical motor-operated industrial and commercial cleaning appliances. Specification for general requirements
BS 6057:Part 3:Section 3.5:1985, ISO 127-1984 BS 6057:Part 3:Section 3.5:1985, ISO 127-1984. Rubber latices. Methods of test. Determination of KOH number of natural rubber latices
BS 6649:1985 BS 6649:1985. Specification for clay and calcium silicate modular bricks
BS MA 2-1:1985 BS MA 2-1:1985. Magnetic compasses and binnacles. Specification for class A magnetic compasses, their binnacles and azimuth reading devices (including test procedures)
BS 4G 173-1:1985, ISO 461-1:1985 BS 4G 173-1:1985, ISO 461-1:1985. Connectors for ground electrical supplies for aircraft. Specification for design, performance and test requirements
BS 4G 173-2:1985, ISO 461-2:1985 BS 4G 173-2:1985, ISO 461-2:1985. Connectors for ground electrical supplies for aircraft. Specification for dimensions
BS 1902-4.0:1985 BS 1902-4.0:1985. Methods of testing refractory materials. Properties measured under an applied stress. Introduction
BS 3056-1:1985 BS 3056-1:1985. Sizes of refractory bricks. Specification for multi-purpose bricks
BS 4483:1985 BS 4483:1985. Specification for steel fabric for the reinforcement of concrete
BS 5760:Part 1:1985 BS 5760:Part 1:1985. Reliability of systems, equipment and components. Guide to reliability and maintainability programme management
BS 3A 109:1985 BS 3A 109:1985. Specification for steel shear bolts (Unified hexagons and Unified threads)
BS 1000[3/31]:1985 BS 1000[3/31]:1985. Universal Decimal Classification. English full edition. Social sciences in general. Demography. Sociology. Statistics
BS 3056-2:1985 BS 3056-2:1985. Sizes of refractory bricks. Specification for bricks for use in glass-melting furnaces
BS 4500-4:1985, ISO 5166-1982 BS 4500-4:1985, ISO 5166-1982. ISO limits and fits. Specification for system of cone (taper) fits for cones from C=1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
BS 4727:Part 3:Group 08:1985 BS 4727:Part 3:Group 08:1985. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms particular to telecommunications and electronics. Acoustics and electroacoustics terminology
BS 5478-4:1985 BS 5478-4:1985. Calculators and adding machines. Glossary of terms for calculators
BS 6654:1985 BS 6654:1985. Method for determination of the electrical resistivity of textile floor coverings
BS 9727:1985 BS 9727:1985. Sectional specification for power transformers of assessed quality for use in electronic equipment for capability approval
BS 397-3:1985 BS 397-3:1985. Primary batteries. Specification for batteries not included in Parts 1 and 2
BS 9733:1985 BS 9733:1985. Sectional specification for pulse transformers of assessed quality for use in electronic equipment for capability approval
BS 9940-05.00:1985, IEC 60115-7:1984,QC 400500:1984 BS 9940-05.00:1985, IEC 60115-7:1984,QC 400500:1984. Harmonized system of quality assessment for electronic components. Fixed resistors for use in electronic equipment. Sectional specification: fixed resistor networks in which not all resistors are individually measurable
BS 6356-2:1985, ISO 8169-1984 BS 6356-2:1985, ISO 8169-1984. Spraying equipment for crop protection. Specification for connecting dimensions for nozzles and manometers
BS 6356-3:1985, ISO 4102-1984 BS 6356-3:1985, ISO 4102-1984. Spraying equipment for crop protection. Specification for dimensions of connection threading
BS 6667:Part 1:1985, IEC 60801-1:1984 BS 6667:Part 1:1985, IEC 60801-1:1984. Electromagnetic compatibility for industrial-process measurement and control equipment. General introduction
BS 6680:1985 BS 6680:1985. Specification for flameproof equipment for diesel engines for use in coal mines and other mines susceptible to firedamp
BS 809:1985, ISO 707-1985 BS 809:1985, ISO 707-1985. Methods for sampling of milk and milk products
BS 4585-15:1985, ISO 6571-1984 BS 4585-15:1985, ISO 6571-1984. Methods of test for spices and condiments. Determination of volatile oil content
BS 1831-1:1985 BS 1831-1:1985. Common names for pesticides. Guide to principles for selection of common names
BS 5948:Part 3:1985, ISO 4818:1984 BS 5948:Part 3:1985, ISO 4818:1984. Household sewing machines. Method for determination of creep of one ply of material over another
BS 6667:Part 3:1985, IEC 60801-3:1984 BS 6667:Part 3:1985, IEC 60801-3:1984. Electromagnetic compatibility for industrial-process measurement and control equipment. Method of evaluating susceptibility to radiated electromagnetic energy
BS 5954-3:1985, IEC 60297-3:1984 BS 5954-3:1985, IEC 60297-3:1984. Dimensions of mechanical structures of the 482.6 mm (19 in) series. Specification for subracks and associated plug-in units
BS 6665:1985, ISO 3993-1984 BS 6665:1985, ISO 3993-1984. Method for determination of density or relative density of liquefied petroleum gases and other light hydrocarbons by pressure hydrometer method
BS 6200-3.12.2:1985, EN 24946:1990,ISO 4946:1984 BS 6200-3.12.2:1985, EN 24946:1990,ISO 4946:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of copper. Steel and cast iron: spectrophotometric method
BS 6200-3.20.3:1985, ISO 4939:1984 BS 6200-3.20.3:1985, ISO 4939:1984. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of nickel. Steel and cast iron: spectrophotometric method
BS 6200-3.32.4:1985, ISO 7692:1983 BS 6200-3.32.4:1985, ISO 7692:1983. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of titanium. Ferrotitanium: volumetric method
BS 903-A11:1985, ISO 133-1983 BS 903-A11:1985, ISO 133-1983. Physical testing of rubber. Determination of crack growth (De Mattia)
BS 5615:1985 BS 5615:1985. Specification for insulating jackets for domestic hot water storage cylinders
BS 8110-3:1985 BS 8110-3:1985. Structural use of concrete. Design charts for singly reinforced beams, doubly reinforced beams and rectangular columns
BS 2L 116:1985 BS 2L 116:1985. Specification for tube of 99% aluminium (cold drawn: seamless, not tested hydraulically) (not exceeding 12 mm wall thickness)
BS EN 24671:1993, ISO 4671-1984 BS EN 24671:1993, ISO 4671-1984. Rubber and plastics hose and hose assemblies. Methods of measurement of dimensions
BS 903:Part A35:1985, ISO 471-1983 BS 903:Part A35:1985, ISO 471-1983. Physical testing of rubber. Temperatures, humidities and times for conditioning and testing of test pieces
BS 4559:Part 8:1985, ISO 7395-1984 BS 4559:Part 8:1985, ISO 7395-1984. Methods for preparation of calibration gas mixtures. Mass dynamic method
BS 4998:1985 BS 4998:1985. Specification for moulded thermoplastics dustbins (excluding lids)
BS 6191-5:1985 BS 6191-5:1985. Mail processing machines. Glossary of terms for document inserting machines
BS 6394-2:1985, ISO 6732-1985 BS 6394-2:1985, ISO 6732-1985. Trace elements in milk and milk products. Method for the determination of iron content (reference method)
BS 6674:1985, ISO 7550-1985 BS 6674:1985, ISO 7550-1985. Specification for disposable micropipettes
BS 6L 17:1985 BS 6L 17:1985. Specification for sheet and strip of 99% aluminium (temper designation-O)
BS 5L 34:1985 BS 5L 34:1985. Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
BS 5L 36:1985 BS 5L 36:1985. Specification for wire for solid, cold-forged rivets of 99.5% aluminium (not exceeding 10 mm diameter)
BS 4L 61:1985 BS 4L 61:1985. Specification for sheet and strip of aluminium-manganese alloy (temper designation-O)
BS 903:Part A33:1985, ISO 3865-1983 BS 903:Part A33:1985, ISO 3865-1983. Physical testing of rubber. Methods of test for staining in contact with organic materials
BS 3936-5:1985 BS 3936-5:1985. Nursery stock. Specification for poplars and willows
BS 5173:Part 102:Section 102.5:1985, ISO 6803-1984 BS 5173:Part 102:Section 102.5:1985, ISO 6803-1984. Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests. Pressure impulse test for high pressure hydraulic hoses
BS 6660:1985 BS 6660:1985. Guide to setting up and maintaining micrographics units
BS 6662:1985, IEC 60816:1984 BS 6662:1985, IEC 60816:1984. Guide to methods of measurement of short duration transients on low voltage power and signal lines
BS 2G 215-1:1985, ISO 8056-1:1985 BS 2G 215-1:1985, ISO 8056-1:1985. Nickel-chromium and nickel-aluminium thermocouple extension cables for aircraft. Specification for conductors
BS 6L 16:1985 BS 6L 16:1985. Specification for sheet and strip of 99% aluminium (temper designation H14 or H24)
BS 5L 44:1985 BS 5L 44:1985. Specification for forging stock, bars, extruded sections and forgings of aluminium-2?% magnesium alloy
BS 4L 59:1985 BS 4L 59:1985. Specification for sheet and strip of aluminium-manganese alloy (temper designation H16 or H26)
BS 4L 60:1985 BS 4L 60:1985. Specification for sheet and strip of aluminium-manganese alloy (temper designation H12 or H22)
BS 3L 80:1985 BS 3L 80:1985. Specification for sheet and strip of aluminium-2?% magnesium alloy (temper designation-O)
BS 3L 81:1985 BS 3L 81:1985. Specification for sheet and strip of aluminium-2?% magnesium alloy (temper designation H16 or H26)
BS EN 27942:1994 BS EN 27942:1994. Information processing systems. Computer graphics. Graphical Kernel Systems (GKS) functional description
BS 6068:Part 5:Section 5.2:1985, ISO 7346-1:1984 BS 6068:Part 5:Section 5.2:1985, ISO 7346-1:1984. Water quality. Biological methods. Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)]: static method
BS 6068:Part 5:Section 5.3:1985, ISO 7346-2:1984 BS 6068:Part 5:Section 5.3:1985, ISO 7346-2:1984. Water quality. Biological methods. Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)]: semi-static method
BS 6068:Part 5:Section 5.4:1985, ISO 7346-3:1984 BS 6068:Part 5:Section 5.4:1985, ISO 7346-3:1984. Water quality. Biological methods. Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)]: flow-through method
BS 6068:Part 5:Section 5.6:1985, ISO 7827:1984 BS 6068:Part 5:Section 5.6:1985, ISO 7827:1984. Water quality. Biological methods. Evaluation in an aqueous medium of the ‘ultimate’ aerobic biodegradability of organic compounds: method by analysis of dissolved organic carbon (DOC)
BS 6068:Part 2:Section 2.21:1985, ISO 5961-1985 BS 6068:Part 2:Section 2.21:1985, ISO 5961-1985. Water quality. Physical, chemical and biochemical methods. Determination of cadmium: flame atomic absorption spectrometric methods
BS 6679:1985, EN 201:1985 BS 6679:1985, EN 201:1985. Specification for technical safety requirements for the design and construction of injection moulding machines for plastics and rubber
BS 770-10:1986, ISO 5534:1985 BS 770-10:1986, ISO 5534:1985. Methods for chemical analysis of cheese. Determination of total solids content (reference method)
BS 873-8:1985 BS 873-8:1985. Road traffic signs and internally illuminated bollards. Specification for traffic cones and cylinders
BS 5194-3:1985 BS 5194-3:1985. Surgical instruments. Specification for dissecting forceps
BS 5194-4:1985 BS 5194-4:1985. Surgical instruments. Specification for scissors, shears and other jointed cutting instruments
PD 6513:1985 PD 6513:1985. Magnetic particle flaw detection. A guide to the principles and practice of applying magnetic particle flaw detection in accordance with BS 6072
BS 2462:1986 BS 2462:1986. Specification for black and white disinfectant fluids
BS EN ISO 4623:1995, BS 3900-F13:1986 BS EN ISO 4623:1995, BS 3900-F13:1986. Paints and varnishes. Filiform corrosion test on steel
BS 6493-3:1985, IEC 60749:1984 BS 6493-3:1985, IEC 60749:1984. Semiconductor devices. Mechanical and climatic test methods
BS 6682:1986, ISO 7441-1984 BS 6682:1986, ISO 7441-1984. Method for the determination of bimetallic corrosion in outdoor exposure corrosion tests
BS 3762-3.18:1986 BS 3762-3.18:1986. Analysis of formulated detergents. Quantitative test methods. Method for determination of chlorine oxidizing agents content
BS 4726:1986, ISO 842-1984 BS 4726:1986, ISO 842-1984. Methods for sampling raw materials for paints and varnishes
BS 2576:1986 BS 2576:1986. Method for determination of breaking strength and elongation (strip method) of woven fabrics
DD 136:Part 1:1986 DD 136:Part 1:1986. Token ring local area networks. Technical specification (ISO/DP 8802/5)
BS CECC 30100:1986 BS CECC 30100:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed polyethylene terephthalate film dielectric metal foil capacitors for direct current
BS CECC 31700:1986 BS CECC 31700:1986. Harmonized system of quality assessment for electronic components. Sectional specification: fixed capacitors for direct current with electrodes of thin metal foils and a polycarbonate film dielectric
BS 1347:1986 BS 1347:1986. Specification for architects’, engineers’ and surveyors’ metric scale rules
BS 3564:1986, ISO 67-1981 BS 3564:1986, ISO 67-1981. Method for size-grading of muscovite mica blocks, thins and films
BS 3680-10D:1986, ISO 4365-1985 BS 3680-10D:1986, ISO 4365-1985. Measurement of liquid flow in open channels. Sediment transport. Methods for determination of concentration, particle size distribution and relative density of sediment in streams and canals
BS 4140-1:1986, ISO 802-1976 BS 4140-1:1986, ISO 802-1976. Methods of test for aluminium oxide. Preparation and storage of test samples
BS 4140-2:1986, ISO 803-1976 BS 4140-2:1986, ISO 803-1976. Methods of test for aluminium oxide. Determination of loss of mass at 300°C
BS 4140-3:1986, ISO 806-1976 BS 4140-3:1986, ISO 806-1976. Methods of test for aluminium oxide. Determination of loss of mass at 1000°C and 1200°C
BS 4140-4:1986, ISO 804-1976 BS 4140-4:1986, ISO 804-1976. Methods of test for aluminium oxide. Preparation of sample solution by alkaline fusion
BS 4140-5:1986, ISO 1232-1976 BS 4140-5:1986, ISO 1232-1976. Methods of test for aluminium oxide. Determination of silica content
BS 4140-7:1986, ISO 805-1976 BS 4140-7:1986, ISO 805-1976. Methods of test for aluminium oxide. Determination of iron content
BS 4140-8:1986, ISO 901-1976 BS 4140-8:1986, ISO 901-1976. Methods of test for aluminium oxide. Determination of absolute density using a pyknometer
BS 4140-9:1986, ISO 902-1976 BS 4140-9:1986, ISO 902-1976. Methods of test for aluminium oxide. Measurement of the angle of repose
BS 4140-10:1986, ISO 903-1976 BS 4140-10:1986, ISO 903-1976. Methods of test for aluminium oxide. Determination of untamped density
BS 6100-6.2:1986 BS 6100-6.2:1986. Glossary of building and civil engineering terms. Concrete and plaster. Concrete
BS 4140-12:1986, ISO 1618-1976 BS 4140-12:1986, ISO 1618-1976. Methods of test for aluminium oxide. Determination of vanadium content
BS 3680-3F:1986, ISO 1088-1985 BS 3680-3F:1986, ISO 1088-1985. Measurement of liquid flow in open channels. Stream flow measurement. Collection and processing of data for determination of errors in measurement
BS 3680-4B:1986, ISO 4360:1984 BS 3680-4B:1986, ISO 4360:1984. Methods of measurement of liquid flow in open channels. Weirs and flumes. Triangular profile weirs
BS 3680:Part 8F:1986, ISO 6419/1-1984 BS 3680:Part 8F:1986, ISO 6419/1-1984. Measurement of liquid flow in open channels. Measuring instruments and equipment. Hydrometric data transmission systems: general
BS 4641:1986 BS 4641:1986. Method for specifying electroplated coatings of chromium for engineering purposes
BS 4764:1986 BS 4764:1986. Specification for powder cement paints
BS 6100-6.4:1986 BS 6100-6.4:1986. Glossary of building and civil engineering terms. Concrete and plaster. Admixtures
BS 6103:1986, IEC 60620:1984 BS 6103:1986, IEC 60620:1984. Specification for dimensions for the mounting of single-hole, bush-mounted spindle operated electronic components
BS L 169:1986 BS L 169:1986. Specification for ingots and castings of aluminium-silicon-magnesium alloy (solution treated and artificially aged) (Si 7, Mg 0.6)
DD 136:Part 2:1986 DD 136:Part 2:1986. Token ring local area networks. Guidance for implementors
BS 951:1986 BS 951:1986. Specification for clamps for earthing and bonding purposes
BS 2011:Part 2.2Z/AFc and Z/BFc:1986, IEC 60068-2-53:1984 BS 2011:Part 2.2Z/AFc and Z/BFc:1986, IEC 60068-2-53:1984. Environmental testing. Guidance. Tests Z/AFc and Z/BFc. Guidance on combined temperature (cold and dry heat) and vibration (sinusoidal) tests
BS 4140-11:1986, ISO 1617-1976 BS 4140-11:1986, ISO 1617-1976. Methods of test for aluminium oxide. Determination of sodium content
BS 4140-13:1986, ISO 2073-1976 BS 4140-13:1986, ISO 2073-1976. Methods of test for aluminium oxide. Preparation of sample solution by treatment with hydrochloric acid under pressure
BS 4140-16:1986, ISO 2071-1976 BS 4140-16:1986, ISO 2071-1976. Methods of test for aluminium oxide. Determination of zinc content by flame atomic absorption
BS 4758:1986 BS 4758:1986. Method for specifying electroplated coatings of nickel for engineering purposes
BS 5425-1:1986 BS 5425-1:1986. Coaxial cable for wideband distribution systems. Specification for single unit, semi-airspaced cables for wideband distribution systems
BS 6686:Part 1:1986, IEC 60704-1:1982 BS 6686:Part 1:1986, IEC 60704-1:1982. Methods for determination of airborne acoustical noise emitted by household and similar electrical appliances. General requirements for testing
BS EN 175200:1992 BS EN 175200:1992. Harmonized system of quality assessment for electronic components: sectional specification: circular connectors
BS 5306-0:1986 BS 5306-0:1986. Fire extinguishing installations and equipment on premises. Guide for the selection of installed systems and other fire equipment
BS 6655:1986, EN 26189:1991,ISO 6189-1983 BS 6655:1986, EN 26189:1991,ISO 6189-1983. Specification for pure tone air conduction threshold audiometry for hearing conservation purposes
BS 6671:1986 BS 6671:1986. Specification for thermal packs and drink coolers
BS 6672-1:1986 BS 6672-1:1986. Insulated domestic food containers. Specification for vacuum ware and insulated flasks, jars and jugs
BS 6672-2:1986 BS 6672-2:1986. Insulated domestic food containers. Specification for insulated bags and boxes
BS 1000[77]:1986 BS 1000[77]:1986. Universal Decimal Classification. English full edition. Photography and similar processes
BS 3156-11.1.1:1986, ISO 6974-1984 BS 3156-11.1.1:1986, ISO 6974-1984. Analysis of fuel gases. Methods for non-manufactured gases. Hydrocarbons and inert gases. Determination of hydrocarbons to C8 and inert gases by gas chromatography
BS 3156-11.2.1:1986, ISO 6570-1:1983 BS 3156-11.2.1:1986, ISO 6570-1:1983. Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content. General introduction
BS 3156-11.2.2:1986, ISO 6570-2:1984 BS 3156-11.2.2:1986, ISO 6570-2:1984. Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content. Weighing method
BS 3156-11.2.3:1986, ISO 6570-3:1984 BS 3156-11.2.3:1986, ISO 6570-3:1984. Analysis of fuel gases. Methods for non-manufactured gases. Determination of potential hydrocarbon liquid content. Volumetric method
BS 3900-B4:1986, ISO 6503:1984 BS 3900-B4:1986, ISO 6503:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total lead in paints and similar materials
BS 5350-C1:1986 BS 5350-C1:1986. Methods of test for adhesives. Adhesively bonded joints: mechanical tests. Determination of cleavage strength of adhesive bonds
BS 5351:1986 BS 5351:1986. Specification for steel ball valves for the petroleum, petrochemical and allied industries
BS EN ISO 6988:1995 BS EN ISO 6988:1995. Metallic and other non-organic coatings. Sulfur dioxide test with general condensation of moisture
BS 6068:Part 2:Section 2.22:1986, ISO 7887-1985 BS 6068:Part 2:Section 2.22:1986, ISO 7887-1985. Water quality. Physical, chemical and biochemical methods. Examination and determination of colour
BS 6677-1:1986 BS 6677-1:1986. Clay and calcium silicate pavers for flexible pavements. Specification for pavers
BS 6677-2:1986 BS 6677-2:1986. Clay and calcium silicate pavers for flexible pavements. Code of practice for design of lightly trafficked pavements
BS 6677:Part 3:1986 BS 6677:Part 3:1986. Clay and calcium silicate pavers for flexible pavements. Method for construction of pavements
BS 1881-115:1986 BS 1881-115:1986. Testing concrete. Specification for compression testing machines for concrete
BS 3572:1986 BS 3572:1986. Specification for access fittings for chimneys and other high structures in concrete or brick work
BS 3678:1986 BS 3678:1986. Specification for access hooks for chimneys and other high structures in steel
BS 3900-B5:1986, ISO 6713:1984 BS 3900-B5:1986, ISO 6713:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Preparation of acid extracts from liquid paints or coating powders
BS 3900-B6:1986, ISO 3856-1:1984 BS 3900-B6:1986, ISO 3856-1:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of ‘soluble’ lead content
BS 3900-B7:1986, ISO 3856-2:1984 BS 3900-B7:1986, ISO 3856-2:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of ‘soluble’ antimony content
BS 3900-B8:1986, ISO 3856-3:1984 BS 3900-B8:1986, ISO 3856-3:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of ‘soluble’ barium content
BS 3900-B9:1986, ISO 3856-4:1984 BS 3900-B9:1986, ISO 3856-4:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of ‘soluble’ cadmium content
BS 3900-B10:1986, ISO 3856-5:1984 BS 3900-B10:1986, ISO 3856-5:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of hexavalent chromium content of solid matter
BS 3900-B11:1986, ISO 3856-6:1984 BS 3900-B11:1986, ISO 3856-6:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of total chromium content of liquid matter
BS 3900-B12:1986, ISO 3856-7:1984 BS 3900-B12:1986, ISO 3856-7:1984. Methods of test for paints. Tests involving chemical examination of liquid paints and dried paint films. Determination of ‘soluble’ mercury content
BS 3900-E12:1986, ISO 6441-1984 BS 3900-E12:1986, ISO 6441-1984. Methods of test for paints. Indentation test (spherical or pyramidal)
BS 903-A27:1986, ISO 4637:1979 BS 903-A27:1986, ISO 4637:1979. Physical testing of rubber. Determination of rubber to fabric adhesion. Direct tension method
BS 3900-A8:1986, BS 6664-1:1986,ISO 1516-1981 BS 3900-A8:1986, BS 6664-1:1986,ISO 1516-1981. Methods of test for paints. Tests on liquid paints (excluding chemical tests). Test for flash/no flash (closed cup equilibrium method)
BS 3900-A9:1986, BS 6664-2:1986,ISO 1523-1983 BS 3900-A9:1986, BS 6664-2:1986,ISO 1523-1983. Methods of test for paints. Determination of flashpoint (closed cup equilibrium method)
BS 3900-A13:1986, BS 6664-3:1986,ISO 3680-1983 BS 3900-A13:1986, BS 6664-3:1986,ISO 3680-1983. Methods of test for paints. Test for flash/no flash (rapid equilibrium method)
BS EN ISO 2177:1995 BS EN ISO 2177:1995. Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS 5666-5:1986 BS 5666-5:1986. Methods of analysis of wood preservatives and treated timber. Determination of zinc naphthenate in preservative solutions and treated timber
BS M 58:1986, ISO 8080-1985 BS M 58:1986, ISO 8080-1985. Specification for anodic coating of titanium and titanium alloys by the sulphuric acid process
BS 1583:1986 BS 1583:1986. Specification for one-mark pipettes
BS 5415:Part 2:Section 2.1:1986 BS 5415:Part 2:Section 2.1:1986. Safety of electrical motor-operated industrial and commercial cleaning appliances. Particular requirements. Specification for floor polishing, scrubbing, grinding, scarifying and carpet shampooing appliances
BS 5415:Part 2:Section 2.3:1986 BS 5415:Part 2:Section 2.3:1986. Safety of electrical motor-operated industrial and commercial cleaning appliances. Particular requirements. Specification for spray extraction appliances
BS 5415-2.4:1986 BS 5415-2.4:1986. Safety of electrical motor-operated industrial and commercial cleaning appliances. Particular requirements. Specification for high pressure water/steam cleaning appliances
BS 6332:Part 5:1986 BS 6332:Part 5:1986. Thermal performance of domestic gas appliances. Specification for thermal performance of fanned-circulation ducted-air heaters
BS 2M 46:1986, ISO 2964-1985 BS 2M 46:1986, ISO 2964-1985. Specification for outside diameters and thicknesses of tubing
BS 6431-3.1:1986, EN 186-1:1991 BS 6431-3.1:1986, EN 186-1:1991. Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 3% < E ≤ 6%. Group AIIa. Specification for general products
BS 6431-3.2:1986, EN 186-2:1991 BS 6431-3.2:1986, EN 186-2:1991. Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 3% < E ≤ 6%. Group AIIa. Specification for specific products (terre cuite, cotto, baldosin catalan)
BS 6431-4.1:1986, EN 187-1:1991 BS 6431-4.1:1986, EN 187-1:1991. Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 6% < E ≤ 10%. Group AIIb. Specification for general products
BS 6431-4.2:1986, EN 187-2:1991 BS 6431-4.2:1986, EN 187-2:1991. Ceramic floor and wall tiles. Extruded ceramic tiles with a water absorption of 6% < E ≤ 10%. Group AIIb. Specification for specific products (terre cuite, cotto, baldosin catalan)
BS 6431-5:1986, EN 188:1991
BS 6431-7:1986, EN 177:1991 BS 6431-7:1986, EN 177:1991. Ceramic floor and wall tiles. Specification for dust-pressed ceramic tiles with a water absorption of 3% < E ≤ 6%. Group BIIa
BS 6431-8:1986, EN 178:1991 BS 6431-8:1986, EN 178:1991. Ceramic floor and wall tiles. Specification for dust-pressed ceramic tiles with a water absorption of 6% < E ≤ 10%. Group BIIb
BS 6431-13:1986, EN 101:1991 BS 6431-13:1986, EN 101:1991. Ceramic floor and wall tiles. Method for determination of scratch hardness of surface according to Mohs
BS 6431-22:1986, EN 202:1991 BS 6431-22:1986, EN 202:1991. Ceramic floor and wall tiles. Method for determination of frost resistance
BS 6431-23:1986, EN 163 BS 6431-23:1986, EN 163. Ceramic floor and wall tiles. Specification for sampling and basis for acceptance
BS 1723-1:1986 BS 1723-1:1986. Brazing. Specification for brazing
BS 1892-2.8:1986 BS 1892-2.8:1986. Gymnasium equipment. Particular requirements. Specification for trampolines, mini-trampolines and safety harnesses (trampoline spotting rig)
BS 1892-2.9:1986 BS 1892-2.9:1986. Gymnasium equipment. Particular requirements. Specification for weight training equipment
BS 3424-18:1986 BS 3424-18:1986. Testing coated fabrics. Methods 21A and 21B. Methods for determination of resistance to wicking and lateral leakage
BS 3436:1986 BS 3436:1986. Specification for ingot zinc
BS 6068-2.18:1986 BS 6068-2.18:1986. Water quality. Physical, chemical and biochemical methods. Methods for the determination of easily liberatable cyanide
BS 6661:1986 BS 6661:1986. Guide for design, construction and maintenance of single-skin air supported structures
BS 6695:1986, ISO 7341-1985 BS 6695:1986, ISO 7341-1985. Specification for nostro accounts reconciliation in banking
BS 1892:Part 2:Section 2.7:1986 BS 1892:Part 2:Section 2.7:1986. Gymnasium equipment. Particular requirements. Specification for basketball and mini-basketball equipment
BS 2757:1986, IEC 60085:1984 BS 2757:1986, IEC 60085:1984. Method for determining the thermal classification of electrical insulation
BS CECC 90302:1986 BS CECC 90302:1986. Specification for harmonized system of quality assessment for electronic components. Blank detail specification: integrated voltage comparators
DD 140-1:1986 DD 140-1:1986. Wall ties. Methods of test for mortar joint and timber frame connections
BS 4L 54:1986 BS 4L 54:1986. Specification for tube of 99% aluminium (cold drawn: seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
BS 4L 56:1986 BS 4L 56:1986. Specification for tube of aluminium-2?% magnesium alloy (temper designation-O) (seamless: tested hydraulically) (not exceeding 12 mm wall thickness)
BS AU 205:1986, ISO 7975:1985 BS AU 205:1986, ISO 7975:1985. Method of test for effect of braking on steady state cornering behaviour of road vehicles
BS 1723-2:1986 BS 1723-2:1986. Brazing. Guide to brazing
BS 5763-9:1986, ISO 7937-1985 BS 5763-9:1986, ISO 7937-1985. Methods for microbiological examination of food and animal feeding stuffs. Enumeration of Clostridium perfringens
BS 6689:1986, ISO 6980-1984 BS 6689:1986, ISO 6980-1984. Specification for reference beta radiations for calibrating dosemeters and doseratemeters and for determining their response as a function of beta radiation energy
BS 4140-17:1986, ISO 2828-1973 BS 4140-17:1986, ISO 2828-1973. Methods of test for aluminium oxide. Determination of fluorine content
BS 4140-18:1986, ISO 2829-1973 BS 4140-18:1986, ISO 2829-1973. Methods of test for aluminium oxide. Determination of phosphorus content
BS 4140-19:1986, ISO 2865-1973 BS 4140-19:1986, ISO 2865-1973. Methods of test for aluminium oxide. Determination of boron content
BS 4727-1:Group 04:1986 BS 4727-1:Group 04:1986. Glossary of electrotechnical, power, telecommunication, electronics, lighting and colour terms. Terms common to power, telecommunications and electronics. Measurement terminology
BS 4737-1:1986 BS 4737-1:1986. Intruder alarm systems. Specification for installed systems with local audible and/or remote signalling
BS 4737-4.2:1986 BS 4737-4.2:1986. Intruder alarm systems in buildings. Codes of practice. Code of practice for maintenance and records
BS 5728:Part 4:1986, ISO 7858/1-1985 BS 5728:Part 4:1986, ISO 7858/1-1985. Measurement of flow of cold potable water in closed conduits. Specification for combination meters
BS 6043-2.6:1986, ISO 8004-1985 BS 6043-2.6:1986, ISO 8004-1985. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the density in xylene of calcined cokes
BS 6043-2.7:1986, ISO 6997-1985 BS 6043-2.7:1986, ISO 6997-1985. Methods of sampling and test for carbonaceous materials used in aluminium manufacture. Electrode coke. Determination of the apparent oil content of calcined cokes (gravimetric method)
BS 6068-2.17:1986 BS 6068-2.17:1986. Water quality. Physical, chemical and biochemical methods. Methods for determination of total cyanide
BS 6068-2.19:1986, ISO 6703-3:1984 BS 6068-2.19:1986, ISO 6703-3:1984. Water quality. Physical, chemical and biochemical methods. Method for determination of cyanogen chloride
BS 6068-2.20:1986, ISO 6703-4:1985 BS 6068-2.20:1986, ISO 6703-4:1985. Water quality. Physical, chemical and biochemical methods. Method for determination of cyanide by diffusion at pH 6
BS 6676-2:1986 BS 6676-2:1986. Thermal insulation of cavity walls using man-made mineral fibre batts (slabs). Code of practice for installation of batts (slabs) filling the cavity
BS 6696:1986, ISO 4787-1984 BS 6696:1986, ISO 4787-1984. Methods for use and testing of capacity of volumetric glassware
BS AU 206-1:1986, ISO 4092-1984 BS AU 206-1:1986, ISO 4092-1984. Diagnostic systems for road vehicles. Glossary

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Sell: BSI Standards Construction & Building 3 In the Cheapest

July 30th, 2009 | hench2004

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

BS ISO 8784-1:2005 BS ISO 8784-1:2005. Pulp, paper and board. Microbiological examination. Total count of bacteria, yeast and mould based on disintegration
BS ISO 8600-1:2005 BS ISO 8600-1:2005. Optics and photonics. Medical endoscopes and endotherapy devices. General requirements
BS ISO 8992:2005 BS ISO 8992:2005. Fasteners. General requirements for bolts, screws, studs and nuts
PD IEC/TR 62390:2005 PD IEC/TR 62390:2005. Common automation device. Profile guideline
BS EN 46-2:2006 BS EN 46-2:2006. Wood preservatives. Determination of the preventive action against Hylotrupes bajalus (Linnaeus). Ovicidal effect (laboratory method)
BS 5502-23:2004 BS 5502-23:2004. Buildings and structures for agriculture. Fire precautions. Code of practice
PD CEN/TS 15003:2005 PD CEN/TS 15003:2005. Durability of wood and wood-based products. Criteria for hot air processes for curative uses against wood destroying organisms
BS EN 14817:2006 BS EN 14817:2006. Railway applications. Suspension components. Air-spring control elements
BS EN 1212:2005 BS EN 1212:2005. Chemicals used for treatment of water intended for human consumption. Sodium polyphosphate
BS EN 1211:2005 BS EN 1211:2005. Chemicals used for treatment of water intended for human consumption. Potassium tripolyphosphate
BS EN 1210:2005 BS EN 1210:2005. Chemicals used for treatment of water intended for human consumption. Sodium tripolyphosphate
BS EN 1208:2005 BS EN 1208:2005. Chemicals used for treatment of water intended for human consumption. Sodium calcium polyphosphate
BS EN 1207:2005 BS EN 1207:2005. Chemicals used for treatment of water intended for human consumption. Tetrapotassium pyrophosphate
BS EN 12904:2005 BS EN 12904:2005. Products used for treatment of water intended for human consumption. Silica sand and silica gravel
BS EN 1206:2005 BS EN 1206:2005. Chemicals used for treatment of water intended for human consumption. Tetrasodium pyrophosphate
BS EN 1205:2005 BS EN 1205:2005. Chemicals used for treatment of water intended for human consumption. Disodium dihydrogen pyrophosphate
BS EN 1204:2005 BS EN 1204:2005. Chemicals used for treatment of water intended for human consumption. Calcium tetrahydrogen bis(orthophosphate)
BS EN 1203:2005 BS EN 1203:2005. Chemicals used for treatment of water intended for human consumption. Tripotassium orthophosphate
BS EN 1202:2005 BS EN 1202:2005. Chemicals used for treatment of water intended for human consumption. Dipotassium hydrogen orthophosphate
BS EN 1201:2005 BS EN 1201:2005. Chemicals used for treatment of water intended for human consumption. Potassium dihydrogen orthophosphate
BS EN 1200:2005 BS EN 1200:2005. Chemicals used for treatment of water intended for human consumption. Trisodium orthophosphate
BS EN 1199:2005 BS EN 1199:2005. Chemicals used for treatment of water intended for human consumption. Disodium hydrogen orthophosphate
BS EN 1198:2005 BS EN 1198:2005. Chemicals used for treatment of water intended for human consumption. Sodium dihydrogen orthophosphate
BS ISO 15817:2005 BS ISO 15817:2005. Earth-moving machinery. Safety requirements for remote operator control
DD CEN/TS 15082:2005 DD CEN/TS 15082:2005. Wood preservatives. Determination of the preventive effectiveness against sapstain fungi and mould fungi on freshly sawn timber. Field test
BS ISO 230-4:2005 BS ISO 230-4:2005. Test code for machine tools. Circular tests for numerically controlled machine tools
BS ISO 14508:2006 BS ISO 14508:2006. Road vehicles. Spark plugs. Terminals
BS EN 60794-2-31:2006 BS EN 60794-2-31:2006. Optical fibre cables. Indoor cables. Detailed specification for optical fibre ribbon cables for use in premises cabling
BS EN 60794-2-21:2006 BS EN 60794-2-21:2006. Optical fibre cables. Indoor cables. Detailed specification for multi-fibre optical distribution Cables for use in premises cabling
BS EN 61605:2005 BS EN 61605:2005. Fixed inductors for use in electronic and telecommunication equipment. Marking codes
BS EN 61338-4-1:2005 BS EN 61338-4-1:2005. Waveguide type dielectric resonators. Blank detail specification
BS EN 60794-2-11:2005 BS EN 60794-2-11:2005. Optical fibre cables. Indoor cables. Detailed specification for simplex and duplex cables for use in premises cabling
BS EN 61338-4:2005 BS EN 61338-4:2005. Waveguide type dielectric resonators. Sectional specification
BS ISO 7919-5:2005 BS ISO 7919-5:2005. Mechanical vibration. Evaluation of machine vibration by measurements on rotating shafts. Machine sets in hydraulic power generating and pumping plants
BS EN 14803:2006 BS EN 14803:2006. Identification and/or determination of the quantity of waste
BS EN 12574-3:2006 BS EN 12574-3:2006. Stationary waste containers. Safety and health requirements
BS EN 14840:2005 BS EN 14840:2005. Joint fillers and sealants. Test methods for preformed joint seals
BS 8103-2:2005 BS 8103-2:2005. Structural design of low rise buildings. Code of practice for masonry walls for housing
05/30104509 DC 05/30104509 DC. HD 605 S2. Electrical cables. Additional test methods
BS EN 14188-3:2006 BS EN 14188-3:2006. Joint fillers and sealants. Specification for preformed joint seals
BS EN 12574-1:2006 BS EN 12574-1:2006. Stationary waste containers. Containers with a capacity up to 10000 l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device. Dimensions and design
BS EN 12574-2:2006 BS EN 12574-2:2006. Stationary waste containers. Performance requirements and test methods
BS EN 50377-10-2:2005 BS EN 50377-10-2:2005. Connectors sets and interconnect components to be used in optical fibre communication systems. Product specifications. MU/APC singlemode terminated on IEC 60793-2 category B1 fibre
BS EN ISO 16047:2005 BS EN ISO 16047:2005. Fasteners. Torque/clamp force testing
EN60332-1-1 (IEC60332-1-1 : 2004) AS EN60332-1-1 (IEC60332-1-1 : 2004) AS. EN60332-1-1 : 2004 Tests on electrical and optical cables under fire conditions. Part 1-1: Test on a single vertical insulated wire or cable – Apparatus
DD ISO/TS 19218:2005 DD ISO/TS 19218:2005. Medical devices. Coding structure for adverse event type and cause
BS ISO 13491-2:2005 BS ISO 13491-2:2005. Banking. Secure cryptographic devices (retail). Security compliance checklists for devices used in financial transactions
BS ISO 11568-2:2005 BS ISO 11568-2:2005. Banking. Key management (retail). Symmetric ciphers, their key management and life cycle
BS EN ISO/IEC 17020:2004 BS EN ISO/IEC 17020:2004. General criteria for the operation of various types of bodies performing inspection
BS EN 14841:2005 BS EN 14841:2005. LPG equipment and accessories. Discharge procedures for LPG rail tankers
PD IEC/TR 62222:2005 PD IEC/TR 62222:2005. Fire performance of communication cables installed in buildings
BS ISO 20859:2005 BS ISO 20859:2005. Cinematography. Spectral response of photographic audio reproducers for analog dye sound tracks on 35 mm film
BS EN ISO 16070:2005 BS EN ISO 16070:2005. Petroleum and natural gas industries. Downhole equipment. Lock mandrels and landing nipples
BS ISO 22309:2006 BS ISO 22309:2006. Microbeam analysis. Quantitative analysis using energy-dispersive spectrometry (EDS)
DD IEC/TS 62257-3:2004 DD IEC/TS 62257-3:2004. Recommendations for small renewable energy and hybrid systems for rural electrification. Project development and management
DD IEC/TS 62257-5:2005 DD IEC/TS 62257-5:2005. Recommendations for small renewable energy and hybrid systems for rural electrification. Protection against electrical hazards
DD IEC/TS 62257-4:2005 DD IEC/TS 62257-4:2005. Recommendations for small renewable energy and hybrid systems for rural electrification. System selection and design
ISO3864-3 : 2006 EDTN1 ISO3864-3 : 2006 EDTN1. ISO3864-3 : 2006 Graphical symbols – Safety colours and safety signs. Part 3: Design principles for graphical symbols for use in safety signs
BS EN ISO 17836:2004 BS EN ISO 17836:2004. Thermal spraying. Determination of the deposition efficiency
BS ISO 7867-2:2005 BS ISO 7867-2:2005. Tyres and rims (metric series) for agricultural tractors and machines. Service description and load ratings
BS ISO 7867-1:2005 BS ISO 7867-1:2005. Tyres and rims (metric series) for agricultural tractors and machines. Tyre designation, dimensions and marking, and tyre/rim coordination
BS ISO 5636-5:2003 BS ISO 5636-5:2003. Paper and board. Determination of air permeance and air resistance (medium range). Gurley method
BS EN ISO 12683:2004 BS EN ISO 12683:2004. Mechanically deposited coatings of zinc. Specification and test methods
BS EN ISO 11979-7:2006 BS EN ISO 11979-7:2006. Ophthalmic implants. Intraocular lenses. Clinical investigations
PD IEC/TR 61292-5:2005 PD IEC/TR 61292-5:2005. Optical amplifiers. Polarization mode dispersion parameter. General information
BS EN 14831:2005 BS EN 14831:2005. Fasteners. Tightening performance. Torque/Angle simplified test method
BS EN ISO 11979-3:2006 BS EN ISO 11979-3:2006. Ophthalmic implants. Intraocular lenses. Mechanical properties and test methods
BS EN 61883-5:2005 BS EN 61883-5:2005. Consumer audio/video equipment. Digital interface. SDL-DVCR data transmission
BS EN 61883-4:2005 BS EN 61883-4:2005. Consumer audio/video equipment. Digital interface. MPEG2-TS data transmission
BS EN 61883-3:2005 BS EN 61883-3:2005. Consumer audio/video equipment. Digital interface. HD-DVCR data transmission
BS EN 61883-2:2005 BS EN 61883-2:2005. Consumer audio/video equipment. Digital interface. SD-DVCR data transmission
BS EN 60998-2-4:2005 BS EN 60998-2-4:2005. Connecting devices for low voltage circuits for household and similar purposes. Particular requirements for twist-on connecting devices
BS 7346-5:2005 BS 7346-5:2005. Components for smoke and heat control systems. Functional recommendations and calculation methods for smoke and heat exhaust ventilation systems, employing time-dependent design fires. Code of practice
BS EN 14832:2005 BS EN 14832:2005. Petroleum and related products. Determination of the oxidation stability and corrosivity of fire-resistant phosphate ester fluids
BS ISO 3911:2004 BS ISO 3911:2004. Wheels and rims for pneumatic tyres. Vocabulary, designation and marking
BS EN 14833:2005 BS EN 14833:2005. Petroleum and related products. Determination of the hydrolytic stability of fire-resistant phosphate ester fluids
BS EN 60376:2005 BS EN 60376:2005. Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
BS EN ISO 4684:2005 BS EN ISO 4684:2005. Leather. Chemical tests. Determination of volatile matter
DD CEN/TS 15053:2005 DD CEN/TS 15053:2005. Non-destructive testing. Recommendations for discontinuities-types in test specimens for examination
BS EN 13384-3:2005 BS EN 13384-3:2005. Chimneys. Thermal and fluid dynamic calculation methods. Methods for the development of diagrams and tables for chimneys serving one heating appliance
PD ISO/TR 14799-2:2005 PD ISO/TR 14799-2:2005. Comparison of worldwide escalator and moving walk safety standards. Abbreviated comparison and comments
PD ISO/TR 18492:2005 PD ISO/TR 18492:2005. Long-term preservation of electronic document-based information
BS EN 50396:2005 BS EN 50396:2005. Non electrical test methods for low voltage electric cables
BS EN ISO 8871-2:2004 BS EN ISO 8871-2:2004. Elastomeric parts for parenterals and for devices for pharmaceutical use. Identification and characterization
BS EN ISO 8871-1:2004 BS EN ISO 8871-1:2004. Elastomeric parts for parenterals and for devices for pharmaceutical use. Extractables in aqueous autoclavates
BS ISO 4249-3:2004 BS ISO 4249-3:2004. Motorcycle tyres and rims (code-designated series). Rims
PD CEN/TR 13768:2004 PD CEN/TR 13768:2004. Characterization of sludges. Good practice for combined incineration of sludges and household wastes
PD CEN/TR 13767:2004 PD CEN/TR 13767:2004. Characterisation of sludges. Good practice for sludges incineration with and without grease and screenings
05/30103278 DC 05/30103278 DC. ISO 21047. Information and documentation. International standard textual work code (ISTC)
BS ISO 10223:2005 BS ISO 10223:2005. Textile machinery and accessories. Flat warp knitting machines. Numbering of guide bars
BS EN 48:2005 BS EN 48:2005. Wood preservatives. Determination of eradicant action against larvae of Anobium punctatum (De Geer) (laboratory method)
06/30103169 DC 06/30103169 DC. EN 12094-7. Fixed firefighting systems. Components for gas extinguishing systems. Part 7. Requirements and test methods for nozzles
NA to BS EN 1991-1-1:2002 NA to BS EN 1991-1-1:2002. UK National Annex to Eurocode 1: Actions on structures. General actions. Densities, self-weight, imposed loads for buildings
BS ISO 16287:2005 BS ISO 16287:2005. Plain bearings. Thermoplastic bushes. Dimensions and tolerances
BS EN ISO 15614-6:2006 BS EN ISO 15614-6:2006. Specification and qualification of welding procedures for metallic materials. Welding procedure test. Arc and gas welding of copper and its alloys
BS ISO 6117:2005 BS ISO 6117:2005. Road vehicles. Elastomeric boots for drum-type, hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (service temperature 100?C max.)
BS ISO 22030:2005 BS ISO 22030:2005. Soil quality. Biological methods. Chronic toxicity in higher plants
DD CLC/TS 50131-2-2:2004 DD CLC/TS 50131-2-2:2004. Alarm systems. Intrusion systems. Requirements for passive infrared detectors
BS EN 60336:2005 BS EN 60336:2005. Medical electrical equipment. X-ray tube assemblies for medical diagnosis. Characteristics of focal spots
BS EN 12504-4:2004 BS EN 12504-4:2004. Testing concrete. Determination of ultrasonic pulse velocity
ISO/IEC14165-122 : 2005 EDTN 1 ISO/IEC14165-122 : 2005 EDTN 1. ISO/IEC14165-122 : 2005 Information technology – Fibre Channel. Part 122: Arbitrated Loop-2 (FC-AL-2)
BS EN 61744:2005 BS EN 61744:2005. Calibration of fibre optic chromatic dispersion test sets
BS ISO 11760:2005 BS ISO 11760:2005. Classification of coals
BS ISO 4251-1:2005 BS ISO 4251-1:2005. Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre designation and dimensions, and approved rim contours
BS ISO 8664:2005 BS ISO 8664:2005. Tyres for agricultural tractors and machines. Code-designated and service-description marked radial drive-wheel tyres
BS ISO 14420:2005 BS ISO 14420:2005. Carbonaceous products for the production of aluminium. Baked anodes and shaped carbon products. Determination of the coefficient of linear thermal expansion
BS ISO 4251-2:2005 BS ISO 4251-2:2005. Tyres (ply rating marked series) and rims for agricultural tractors and machines. Tyre load ratings
BS ISO 12986-2:2005 BS ISO 12986-2:2005. Carbonaceous materials used in the production of aluminium. Prebaked anodes and cathode blocks. Determination of flexural strength by the four-point method
BS EN 50369:2005 BS EN 50369:2005. Liquid tight sheathing systems for cable management
BS EN 60609-1:2005 BS EN 60609-1:2005. Hydraulic turbines, storage pumps and pump-turbines. Caviatation pitting evaltuation. Evalution in reaction turbines, storage pumps and pumps-turbines
BS EN 13848-2:2006 BS EN 13848-2:2006. Railway applications. Track. Track geometry quality. Measuring systems. Track recording vehicles
BS ISO 22308:2005 BS ISO 22308:2005. Cork stoppers. Sensory analysis
BS EN 13141-7:2004 BS EN 13141-7:2004. Ventilation for buildings. Performance testing of components/products for residential ventilation. Performance testing of a mechanical supply and exhaust ventilation units (including heat recovery) for mechanical ventilation systems intended for single family dwellings
BS EN 14771:2005, BS 2000-533:2005 BS EN 14771:2005, BS 2000-533:2005. Bitumen and bituminous binders. Determination of the flexural creep stiffness. Bending Beam Rheometer (BBR)
BS EN 14770:2005, BS 2000-536:2005 BS EN 14770:2005, BS 2000-536:2005. Methods of test for petroleum and its products. Bitumen and bituminous binders. Determination of complex shear modulus and phase angle. Dynamic Shear Rheometer (DSR)
BS EN 14769:2005, BS 2000-535:2005 BS EN 14769:2005, BS 2000-535:2005. Methods of test for petroleum and its products. Bitumen and bituminousbi nders. Accelerated long-term ageing conditioning by a pressure ageingves sel (PAV)
BS EN 14804:2005 BS EN 14804:2005. Language study tour providers. Requirements
BS EN 14802:2005 BS EN 14802:2005. Plastics piping systems. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
PAS 61:2006 PAS 61:2006. Determination of priority pollutants in surface water using passive sampling
BS 4745:2005 BS 4745:2005. Determination of the thermal resistance of textiles. Two-plate method: fixed pressure procedure, two-plate plate method: fixed opening procedure, and single-plate method
BS ISO 12987:2004 BS ISO 12987:2004. Carbonaceous materials for the production of aluminium. Anodes, cathodes blocks, sidewall blocks and baked ramming pastes. Determination of the thermal conductivity using a comparative method
BS ISO 6199:2005 BS ISO 6199:2005. Micrographics. Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm. Operating procedures
BS ISO 4087:2005 BS ISO 4087:2005. Micrographics. Microfilming of newspapers for archival purposes on 35 mm microfilm
BS ISO 5243:2004 BS ISO 5243:2004. Textile machinery and accesories. Numbering of heald frames and drop wire bars in a loom
BS 6734:2004 BS 6734:2004. Antimicrobial efficacy of disinfectants for veterinary and agricultural use. Method
BS 2S 205:2004 BS 2S 205:2004. Austenitic chromium-nickel steel wire rod, wire and springs. Specification
BS 2S 204:2004 BS 2S 204:2004. Chromium-vanadium steel wire rod, wire and springs. High duty ground wire. Hardened and tempered. Specification
BS 2S 203:2004 BS 2S 203:2004. Carbon steel wire rod, wire and springs. High duty unground wire. Hardened and tempered. Specification
BS 2S 202:2004 BS 2S 202:2004. Carbon steel wire rod, patented cold drawn carbon steel wire and springs. High duty ground wire. Specification
BS EN ISO 21968:2005 BS EN ISO 21968:2005. Non-magnetic metallic coatings on metallic and non-metallic basis materials. Measurement of coating thickness. Phase-sensitive eddy-current method
BS ISO 1924-3:2005 BS ISO 1924-3:2005. Paper and board. Determination of tensile properties. Constant rate of elongation method (100 mm/min)
ISO10597 : 2004 EDTN2 ISO10597 : 2004 EDTN2. ISO10597 : 2004 Road vehicles – Flat attachment fixing nuts for commercial vehicles – Test methods
BS ISO 21247:2005 BS ISO 21247:2005. Combined accept-zero sampling systems and process control procedures for product acceptance
ISO14617-14 : 2004 EDTN1 ISO14617-14 : 2004 EDTN1. ISO14617-14 : 2004 Graphical symbols for diagrams -. Part 14: Devices for transport and handling of material
ISO14617-13 : 2004 EDTN1 ISO14617-13 : 2004 EDTN1. ISO14617-13 : 2004 Graphical symbols for diagrams -. Part 13: Devices for material processing
BS EN 14792:2005 BS EN 14792:2005. Stationary source emissions. Determination of mass concentration of nitrogen oxides (NOx). Reference method: Chemiluminescence
BS EN 14791:2005 BS EN 14791:2005. Stationary source emissions. Determination of mass concentration of sulphur dioxide. Reference method
BS EN 14795:2005 BS EN 14795:2005. LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Periodic inspection
BS EN 14794:2005 BS EN 14794:2005. LPG equipment and accessories. Transportable refillable aluminium cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling
PD CEN/TR 14788:2006 PD CEN/TR 14788:2006. Ventilation for buildings. Design and dimensioning of residential ventilation systems
BS EN 62053-52:2005 BS EN 62053-52:2005. Electricity metering equipment (AC). Particular requirements. Symbols
BS EN 12697-43:2005 BS EN 12697-43:2005. Bituminous mixtures. Test methods for hot mix asphalt. Resistance to fuel
BS EN 60708:2005 BS EN 60708:2005. Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath
BS EN 14790:2005 BS EN 14790:2005. Stationary source emissions. Determination of the water vapour in ducts
BS 5588-5:2004 BS 5588-5:2004. Fire precautions in the design, construction and use of buildings. Access and facilities for fire-fighting
BS EN 14789:2005 BS EN 14789:2005. Stationary source emissions. Determination of volume concentration of oxygen (O2). Reference method. Paramagnetism
BS ISO 14624-3:2005 BS ISO 14624-3:2005. Space systems. Safety and compatibility of materials. Determination of offgassed products from materials and assembled articles
BS ISO 10019:2005 BS ISO 10019:2005. Guidelines for the selection of quality management system consultants and use of their services
BS EN 50395:2005 BS EN 50395:2005. Electrical test methods for low voltage energy cables
BS EN 61169-29:2005 BS EN 61169-29:2005. Radio-frequency connectors. Sectional specification. Miniature radio frequency coaxial connectors model screw, snap-on, push-pull or quick-lock, slide-in (rack and panel applications). Characterisctic impedance 50 ohms (type 1,0/2,3). 50 ohms and 75 ohms applications
BS EN 14617-2:2004 BS EN 14617-2:2004. Agglomerated stone. Test methods. Determination of flexural strength (bending)
BS ISO 16962:2005 BS ISO 16962:2005. Surface chemical analysis. Analysis of zinc- and/or aluminium-basedmetal lic coatings by glow-discharge optical-emission spectrometry
BS EN 54-18:2005 BS EN 54-18:2005. Fire detection and fire alarm systems. Input/output devices
BS EN 14882:2005 BS EN 14882:2005. Rubber or plastic coated fabrics. Determination of the static and dynamic coefficient of friction
DD CEN/TS 14774-3:2004 DD CEN/TS 14774-3:2004. Solid biofuels. Methods for the determination of moisture content. Oven dry method. Moisture in general analysis sample
DD CEN/TS 14774-2:2004 DD CEN/TS 14774-2:2004. Solid biofuels. Methods for the determination of moisture content. Oven dry method. Total moisture. Simplified method
DD CEN/TS 14774-1:2004 DD CEN/TS 14774-1:2004. Solid biofuels. Methods for the determination of moisture content. Oven dry method. Total moisture. Reference method
ISO15758 : 2004 EDTN 1 ISO15758 : 2004 EDTN 1. ISO15758 : 2004 Hygrothermal performance of building equipment and industrial installations – Calculation of water vapour diffusion – Cold pipe insulation systems
ISO5247-1 : 2004 EDTN1 ISO5247-1 : 2004 EDTN1. ISO5247-1 : 2004 Textile machinery and accessories – Weaving machines – . Part 1 : Vocabulary and classification
ISO16793 : 2005 EDTN1 ISO16793 : 2005 EDTN1. ISO16793 : 2005 Nuclear fuel technology – Guide for ceramographic prepararation of UO2 sintered pellets for microstructure examination
BS EN ISO 3785:2006 BS EN ISO 3785:2006. Metallic materials. Designation of test specimen axes in relation to product texture
BS ISO 14064-3:2006 BS ISO 14064-3:2006. Greenhouse gases. Specifications with guidance for the validation and verification of greenhouse gas assertions
BS EN 61883-6:2005 BS EN 61883-6:2005. Consumer audio/video equipment. Digital interface. Audio and music data transmission
ISO13007-4 : 2005 EDTN1 ISO13007-4 : 2005 EDTN1. ISO13007-4 : 2005 Ceramic tiles . Grouts and adhesives . Part 4: Test methods for grouts
ISO13007-3 : 2004 EDTN1 ISO13007-3 : 2004 EDTN1. ISO13007-3 : 2004 Ceramic tiles – Grouts and adhesives -. Part 3: Terms, definitions and specifications for grouts
ISO13007-2 : 2005 EDTN1 ISO13007-2 : 2005 EDTN1. ISO13007-2 : 2005 Ceramic tiles – Grouts and adhesives. Part 2: Test methods for adhesives
ISO13007-1 : 2004 EDTN1 ISO13007-1 : 2004 EDTN1. ISO13007-1 : 2004 Ceramic tiles – Grouts and adhesives -. Part 1: Terms, definitions and specifications for adhesives
BS EN 12472:2005 BS EN 12472:2005. Method for the simulation of wear and corrosion for the detection of nickel release from coated items
BS ISO 16063-22:2005 BS ISO 16063-22:2005. Methods for the calibration of vibration and shock transducers. Shock calibration by comparison to a reference transducer
BS EN 60838-1:2004 BS EN 60838-1:2004. Miscellaneous lampholders. General requirements and tests
BS EN 789:2004 BS EN 789:2004. Timber structures. Test methods. Determination of mechanical properties of wood based panels
BS EN 14761:2006 BS EN 14761:2006. Wood flooring. Solid wood parquet. Vertical finger, wide finger and module brick
BS EN 14762:2006 BS EN 14762:2006. Wood flooring. Sampling procedures for evaluation of conformity
BS EN 14755:2005 BS EN 14755:2005. Extruded particleboards. Specifications
BS EN 1907:2005 BS EN 1907:2005. Safety requirements for cableway installations designed to carry persons. Terminology
BS EN ISO 4788:2005 BS EN ISO 4788:2005. Laboratory glassware. Graduated measuring cylinders
BS EN ISO 385:2005 BS EN ISO 385:2005. Laboratory glassware. Burettes
BS ISO 4664-1:2005 BS ISO 4664-1:2005. Rubber, vulcanized or thermoplastic. Determination of dynamic properties. General guidance
BS ISO 22222:2005 BS ISO 22222:2005. Personal financial planning. Requirements for personal financial planners
BS ISO 16860:2005 BS ISO 16860:2005. Hydraulic fluid power. Filters. Test method for differential pressure devices
BS EN ISO 11607-1:2006 BS EN ISO 11607-1:2006. Packaging for terminally sterilized medical devices. Requirements for materials, sterile barrier systems and packaging systems
BS EN ISO 11607-2:2006 BS EN ISO 11607-2:2006. Packaging for terminally sterilized medical devices. Validation requirements for forming, sealing and assembly processes
DD CEN/TS 14826:2004 DD CEN/TS 14826:2004. Postal services. Automatic identificaton of items. Two dimensional code symbol print quality specification or machine readable Digital Postage Marks
BS EN ISO 13628-1:2005 BS EN ISO 13628-1:2005. Petroleum and natural gas industries. Design and operation of subsea production systems. General requirements and recommendations
BS ISO 13322-1:2005 BS ISO 13322-1:2005. Particle size analysis. Image analysis methods. Static image analysis methods
BS EN 61164:2004 BS EN 61164:2004. Reliability growth. Statistical test and estimation methods
BS EN 61160:2005 BS EN 61160:2005. Design review
BS EN 60300-3-3:2004 BS EN 60300-3-3:2004. Dependability management. Application guide. Life cycle costing
BS EN 60079-27:2006 BS EN 60079-27:2006. Electrical apparatus for explosive gas atmospheres. Fieldbus intrinsically safe concept (FISCO) and fieldbus non-incendive concept (FNICO)
BS EN 60300-3-2:2005 BS EN 60300-3-2:2005. Dependability management. Application guide. Collection of dependability data from the field
BS EN 60519-8:2005 BS EN 60519-8:2005. Safety in electroheat installations. Particular requirements for electroslag remelting furnaces
BS EN 60399:2004 BS EN 60399:2004. Barrel thread for lampholders with shade holder ring
BS 6510:2005 BS 6510:2005. Steel-framed windows and glazed doors
BS EN 12312-15:2006 BS EN 12312-15:2006. Aircraft ground support equipment. Specific requirements. Baggage and equipment tractors
DD CEN/TS 14751:2004 DD CEN/TS 14751:2004. Welding. Use of time-of-flight diffraction technique (TOFD) for examination of welds
ISO/IEC14165-222 : 2005 EDTN1 ISO/IEC14165-222 : 2005 EDTN1. ISO/IEC14165-222 : 2005 Information technology – Fibre Channel -. Part 222: Single-byte command sets-2 mapping protocol (FC-SB-2)
BS EN 529:2005 BS EN 529:2005. Respiratory protective devices. Recommendations for selection, use, care and maintenance. Guidance document
BS EN ISO 16484-3:2005 BS EN ISO 16484-3:2005. Building automation and control systems (BACS). Functions
BS EN 1748-2-1:2004 BS EN 1748-2-1:2004. Glass in building. Special basic products. Glass ceramics. Definitions and general physical and mechanical properties
BS EN 1748-1-1:2004 BS EN 1748-1-1:2004. Glass in building. Special basic products. Borosilicate glasses. Definition and general physical and mechanical properties
05/30100819 DC 05/30100819 DC. BS ISO/IEC 19780-1. Text-based Collaborative Learning Communication
05/30100812 DC 05/30100812 DC. BS ISO/IEC 19778-1. Collaborative Technology. Collaborative Workplace. Part 1. Data Model
BS EN 14187-9:2006 BS EN 14187-9:2006. Cold applied joint sealants. Test methods. Function testing of joint sealants
BS EN 12150-2:2004 BS EN 12150-2:2004. Glass in building. Thermally toughened soda lime silicate safety glass. Evaluation of conformity/Product standard
BS EN 1863-2:2004 BS EN 1863-2:2004. Glass in building. Heat strengthened soda lime silicate glass. Evaluation of conformity. Product standard
BS EN 12337-2:2004 BS EN 12337-2:2004. Glass in building. Chemically strengthed soda lime silicate glass. Evaluation of conformity/Product standard
BS EN ISO 11621:2005 BS EN ISO 11621:2005. Gas cylinders. Procedures for change of gas service
BS EN 13024-2:2004 BS EN 13024-2:2004. Glass in building. Thermally toughened borosilicate safety glass. Evaluation of conformity/Product standard
BS EN 1096-4:2004 BS EN 1096-4:2004. Glass in building. Coated glass. Evaluation of conformity/Product standard
BS ISO/IEC 19770-1:2006 BS ISO/IEC 19770-1:2006. Software asset management. Processes
BS ISO/IEC 15476-6:2006 BS ISO/IEC 15476-6:2006. Information technology. CDIF semantic metamodel. State/event models
BS ISO/IEC 15476-4:2005 BS ISO/IEC 15476-4:2005. Information technology. CDIF semanic metamodel. Data models
BS EN 14179-2:2005 BS EN 14179-2:2005. Glass in building. Heat-soaked thermally-toughened soda lime silicate safety glass. Evaluation of conformity/product standard
BS EN 1439:2005 BS EN 1439:2005. LPG equipment and accessories. Transportable refillable welded and brazed steel liquefied petroleum gas (LPG) cylinders. Procedure for checking before, during and after filling
BS EN 14767:2005 BS EN 14767:2005. LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Periodic inspection
BS EN 14763:2005 BS EN 14763:2005. LPG equipment and accessories. Transportable refillable composite cylinders for liquefied petroleum gas (LPG). Procedure for checking before, during and after filling
BS EN 1104:2005 BS EN 1104:2005. Paper and board intended to come into contact with foodstuffs. Determination of the transfer of antimicrobial constituents
BS EN 14351-1:2006 BS EN 14351-1:2006. Windows and doors. Product standard, performance characteristics. Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics
BS EN 12217:2003 BS EN 12217:2003. Doors. Operating forces. Requirements and classification
BS EN 14759:2005 BS EN 14759:2005. Shutters. Acoustic insulation relative to airborne sound. Expression of performance
BS EN 14501:2005 BS EN 14501:2005. Blinds and shutters. Thermal and visual comfort. Performance characteristics and classification
BS ISO 16612-1:2005 BS ISO 16612-1:2005. Graphic techology. Variable printing data exchange. Using PPML 2.1 and PDF 1.4 (PPML/VDX-2005)
BS EN 62150-1:2005 BS EN 62150-1:2005. Fibre optic active components and devices. Test and measurement procedures. General and guidance
BS EN 14757:2005 BS EN 14757:2005. Water quality. Sampling of fish with multi-mesh gillnets
BS EN 14067-4:2005 BS EN 14067-4:2005. Railway applications. Aerodynamics. Requirements and test procedures for aerodynamics on open track
BS EN 14752:2005 BS EN 14752:2005. Railway applications. Body entrance systems
BS ISO 23713:2005 BS ISO 23713:2005. Pulps. Determination of fibre coarseness by automated optical analysis. Polarized light method
06/30100033 DC 06/30100033 DC. BS EN 3-10. Portable fire extinguishers. Part 10. Provisions for evaluating the conformity of a portable fire extinguisher to EN 3 part 7
BS ISO 6658:2005 BS ISO 6658:2005. Sensory analysis. Methodology. General guidance
BS EN 61754-7:2005 BS EN 61754-7:2005. Fibre optic connector interfaces. Type MPO connector family
BS EN 50162:2004 BS EN 50162:2004. Protection against corrosion by stray current from direct current systems
ISO23551-3 : 2005 EDTN 1 ISO23551-3 : 2005 EDTN 1. ISO23551-3 : 2005 Safety and control devices for gas burners and gas-burning appliances – Particular requirements. Part 3:Gas/air ratio controls, pneumatic type
BS ISO 16246:2005 BS ISO 16246:2005. Road vehicles. M12 x 1,25 spark-plugs with flat seating and 14 mm hexagon and their cylinder head housing
BS ISO 9211-4:2006 BS ISO 9211-4:2006. Optics and optical instruments. Optical coatings. Specific test methods
BS EN 1873:2005 BS EN 1873:2005. Prefabricated accessories for roofing. Individual roof lights of plastics. Product specification and test methods
04/30099768 DC 04/30099768 DC. prEN ISO 8835-3. Inhalational anaesthesia systems. Part 3. Anaesthetic gas scavenging systems. Transfer and receiving systems
BS EN 14727:2005 BS EN 14727:2005. Laboratory furniture. Storage units for laboratories. Requirements and test methods
BS EN 14535-1:2005 BS EN 14535-1:2005. Railway applications. Brake discs for railway rolling stock. Brake discs pressed or shrunk onto the axle or drive shaft, dimensions and quality requirements
BS EN 14209:2005 BS EN 14209:2005. Preformed plasterboard cornices. Definitions, requirements and testmetho ds
BS EN 14496:2005 BS EN 14496:2005. Gypsum based adhesives for thermal/acoustic insulation composite panelsa nd plasterboards. Definitions, requirements and test methods
BS EN 12368:2006 BS EN 12368:2006. Traffic control equipment. Signal heads
BS EN ISO 9073-10:2004 BS EN ISO 9073-10:2004. Textiles. Test methods for nonwovens. Lint and other particles generation in the dry state
BS EN 14389-2:2004 BS EN 14389-2:2004. Road traffic noise reducing devices. Procedures for assessing long term performance. Non-acoustical characteristics
BS EN 13422:2004 BS EN 13422:2004. Vertical road signs. Portable deformable warning devices and delineators. Portable road traffic signs. Cones and cylinders
BS ISO 23853:2004 BS ISO 23853:2004. Cranes. Training of slingers and signallers
BS ISO 22867:2004 BS ISO 22867:2004. Forestry machinery. Vibration test code for portable hand-held machines with internal combustion engine. Vibration at the handles
BS EN 61267:2006 BS EN 61267:2006. Medical diagnostic X-ray equipment. Radiation conditions for use in the determination of characteristics
PD ISO/IEC GUIDE 28:2004 PD ISO/IEC GUIDE 28:2004. Conformity assessment. Guidance on a third-party certification system for products
BS EN 1047-1:2005 BS EN 1047-1:2005. Secure storage units. Classification and methods of test for resistance to fire. Data cabinets and diskette inserts
BS EN 50416:2005 BS EN 50416:2005. Household and similar electrical appliances. Safety. Particular requirements for commercial electric conveyor dishwashing machines
BS 8443:2005 BS 8443:2005. Specification for establishing the suitability of special purpose concrete admixtures
BS ISO 6856:2005 BS ISO 6856:2005. Road vehicles. Unscreened high-voltage ignition cable assemblies. Test methods and general requirements
BS ISO 18132-1:2006 BS ISO 18132-1:2006. Refrigerated light hydrocarbon fluids. General requirements for automatic level gauges. Gauges onboard ships carrying liquefied gases
BS EN 1123-3:2004 BS EN 1123-3:2004. Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems. Dimensions and special requirements for vacuum drainage systems and for drainage systems in ship-building
BS ISO 3526:2005 BS ISO 3526:2005. Oil of sage, Spanish (Salvia lavandulifolia Vahl)
BS ISO 3033-4:2005 BS ISO 3033-4:2005. Oil of spearmint. Scotch variety (Mentha X gracilis Sole)
BS ISO 3033-3:2005 BS ISO 3033-3:2005. Oil of spearmint. Indian type (Mentha spicata L.), redistilled oil
BS ISO 3033-2:2005 BS ISO 3033-2:2005. Oil of spearmint. Chinese types (80 % and 60 %) (Mentha viridis L. var. crispa Benth.), redistilled oil
BS ISO 3033-1:2005 BS ISO 3033-1:2005. Oil of spearmint. Native type (Mentha spicata L.)
BS EN ISO 17895:2005 BS EN ISO 17895:2005. Paints and varnishes. Determination of the volatile organic compound content of low-VOC emulsion paints (in-can VOC)
BS ISO 5751-3:2004 BS ISO 5751-3:2004. Motorcycle tyres and rims (metric series). Range of approved rim contours
BS EN 935:2004 BS EN 935:2004. Chemicals used for treatment of water intended for human consumption. Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric)
BS EN 887:2004 BS EN 887:2004. Chemicals used for treatment of water intended for human consumption. Aluminium iron (III) sulfate
BS EN ISO 7369:2004 BS EN ISO 7369:2004. Pipework. Metal hoses and hose assemblies. Vocabulary
BS ISO 5834-5:2005 BS ISO 5834-5:2005. Implants for surgery. Ultra-high molecular weight polyethylene. Morphology assessment method
BS EN 886:2004 BS EN 886:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium hydroxide silicate sulfate
BS EN 885:2004 BS EN 885:2004. Chemicals used for treatment of water intended for human consumption. Polyaluminium chloride hydroxide silicate
BS EN 14664:2004 BS EN 14664:2004. Chemicals used for treatment of water intended for human consumption. Iron (III) sulfate, solid
BS ISO 22826:2005 BS ISO 22826:2005. Destructive tests on welds in metallic materials. Hardness testing of narrow joints welded by laser and electron beam (Vickers and Knoop hardness tests)
BS ISO 14624-7:2006 BS ISO 14624-7:2006. Space systems. Safety and compatibility of materials. Determination of permeability and penetration of materials to aerospace fluids
BS ISO 14624-6:2006 BS ISO 14624-6:2006. Space systems. Safety and compatibility of materials. Determination of reactivity of processing materials with aerospace fluids
BS ISO 14624-5:2006 BS ISO 14624-5:2006. Space systems. Safety and compatibility of materials. Determination of reactivity of system/component materials with aerospace propellants
PD IEC/TR 61948-3:2005 PD IEC/TR 61948-3:2005. Nuclear medicine instrumentation. Routine tests. Positron emission tomographs
BS EN 62274:2005 BS EN 62274:2005. Medical electrical equipment. Safety of radiotherapy record and verify systems
ISO/IEC14496-17 : 2006 EDTN1 ISO/IEC14496-17 : 2006 EDTN1. ISO/IEC14496-17 : 2006 Information technology – Coding of audio visual objects. Part 17: Streaming text format
BS ISO 3519:2005 BS ISO 3519:2005. Oil of lime distilled, Mexican type [Citrus aurantifolia (Christm.) Swingle]
BS EN 13183-3:2005 BS EN 13183-3:2005. Moisture content of a piece of sawn timber. Estimation by capacitance method
BS EN 14996:2006, BS 6068-5.42:2006 BS EN 14996:2006, BS 6068-5.42:2006. Water quality. Guidance on assuring the quality of biological and ecological assessments in the aquatic environment
BS ISO 15825:2004 BS ISO 15825:2004. Rubber compounding ingredients. Carbon black. Determination of aggregate size distribution by disc centrifuge photosedimentory
BS ISO 5751-2:2004 BS ISO 5751-2:2004. Motorcycle tyres and rims (metric series). Tyre dimensions and load-carrying capacities
BS EN ISO 11732:2005, BS 6068-2.93:2005 BS EN ISO 11732:2005, BS 6068-2.93:2005. Water quality. Determination of ammonium nitrogen. Method by flow analysis (CFA and FIA) and spectrometric detection
BS ISO 22048:2004 BS ISO 22048:2004. Surface chemical analysis. Information format for static secondary-ion mass spectrometry
DD CEN/TS 843-6:2004 DD CEN/TS 843-6:2004. Advanced technical ceramics. Monolithic ceramics. Mechanical properties at room temperature. Guidance for fractographic investigation
BS EN 82045-2:2005 BS EN 82045-2:2005. Document management. Metadata elements and information reference model
PD CEN/TR 14739:2004 PD CEN/TR 14739:2004. Scheme for carrying out a risk assessment for flammable refrigerants in case of household refrigerators and freezers
BS ISO 6550-4:2005 BS ISO 6550-4:2005. Road vehicles. Sheath-type glow-plugs with conical seating and their cylinder head housing. M8 x 1 glow-plugs
DD CEN/TS 15083-1:2005 DD CEN/TS 15083-1:2005. Durability of wood and wood-based products. Determination of the natural durability of solid wood against food-destroying fungi, test methods. Basidiomycetes
BS EN 13749:2005 BS EN 13749:2005. Railway applications. Methods of specifying structural requirements of bogie frames
BS EN 61967-2:2005 BS EN 61967-2:2005. Integrated circuits. Measurement of electromagnetic emissions, 150 kHz to 1 GHz. Measurement of radiated emissions. TEM cell and wideband TEM cell method
ISO/TR16352 : 2005 EDTN1 ISO/TR16352 : 2005 EDTN1. ISO/TR16352 : 2005 Road vehicles – Ergonomic aspects of in-vehicle presentation for transport information and control systems – Warning systems
BS ISO 20176:2006 BS ISO 20176:2006. Road vehicles. H-Point machine (HPM II). Specifications and Procedure for H-point determination
DD CEN/TS 15224:2005 DD CEN/TS 15224:2005. Health services. Quality management systems. Guide for the use of EN ISO 9001:2000
BS EN 806-3:2006 BS EN 806-3:2006. Specifications for installations inside buildings conveying water for human consumption. Pipe sizing. Simplified method
BS EN 1303:2005 BS EN 1303:2005. Building hardware. Cylinders for locks. Requirements and test methods
BS EN ISO 1463:2004 BS EN ISO 1463:2004. Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
BS EN ISO 2177:2004 BS EN ISO 2177:2004. Metallic coatings. Measurement of coating thickness. Coulometric method by anodic dissolution
BS ISO 257:2004 BS ISO 257:2004. Pesticides and other agrochemicals. Principles for the selection of common names
ISO3750 : 2006 EDTN2 ISO3750 : 2006 EDTN2. ISO 3750 Zinc alloys – Determination of magnesium content – Flame atomic absorption spectrometric method
BS ISO 15242-2:2004 BS ISO 15242-2:2004. Rolling bearings. Measuring methods for vibration. Radial ball bearings with cylindrical bore and outside surface
BS EN ISO 6507-4:2005 BS EN ISO 6507-4:2005. Metallic materials. Vickers hardness test. Tables of hardness values
BS EN ISO 6507-3:2005 BS EN ISO 6507-3:2005. Metallic materials. Vickers hardness test. Calibration of reference blocks
BS EN ISO 6507-2:2005 BS EN ISO 6507-2:2005. Metallic materials. Vickers hardness test. Verification and calibration of testing machines
BS EN ISO 6507-1:2005 BS EN ISO 6507-1:2005. Metallic materials. Vickers hardness test. Test method
05/30098238 DC 05/30098238 DC. ISO 21081-2. Hydraulic fluid power. Monitoring the level of particulate contamination of the fluid. Part 2. Filter blockage technique
BS 6807:2006 BS 6807:2006. Methods of test for assessment of ignitability of mattresses, upholstered divans and upholstered bed bases with flaming types of primary and secondary sources of ignition
BS ISO 8132:2006 BS ISO 8132:2006. Hydraulic fluid power. Single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series. Mounting dimensions for accessories
BS ISO 6022:2006 BS ISO 6022:2006. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 25M Pa (250 bar) series
BS ISO 6020-2:2006 BS ISO 6020-2:2006. Hydraulic fluid power. Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series. Compact series
BS EN 50200:2006 BS EN 50200:2006. Method of test for resistance to fire of unprotected small cables for use in emergency circuits
BS EN 14870-1:2004 BS EN 14870-1:2004. Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Induction bends
PD IEC/TR 62331:2005 PD IEC/TR 62331:2005. Pulsed field magnetometry
DD 8788-3:2006 DD 8788-3:2006. UK lifelong learner information profile (UKLeaP). UKLeaP. Specification
DD 8788-2:2006 DD 8788-2:2006. UK lifelong learner information profile (UKLeaP). Representation and terminology in implementing the UK lifelong learner i nformation profile. Code of practice
DD 8788-1:2006 DD 8788-1:2006. UK lifelong learner information profile (UKLeaP). Guide
BS ISO 7770:2006 BS ISO 7770:2006. Textiles. Test method for assessing the smoothness appearance of seams in fabrics after cleansing
BS ISO 6561-1:2005 BS ISO 6561-1:2005. Fruits, vegetables and derived products. Determination of cadmium content. Method using graphite furnace atomic absorption spectrometry
BS ISO 17240:2004 BS ISO 17240:2004. Fruit and vegetable products. Determination of tin content. Method using flame atomic absorption spectrometry
BS ISO 12232:2006 BS ISO 12232:2006. Photography. Digital still cameras. Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index
BS ISO 17239:2004 BS ISO 17239:2004. Fruits, vegetables and derived products. Determination of arsenic content. Method using hydride generation atomic absorption spectrometry
BS ISO 22892:2006 BS ISO 22892:2006. Soil quality. Guidelines for the identification of target compounds by gas chromatography and mass spectrometry
ISO/TR18112 : 2006 EDTN1 ISO/TR18112 : 2006 EDTN1. ISO18112 : 2006 Clinical laboratory testing and in vitro diagnostic test systems – In vitro diagnostic medical devices for professional use – Summary of regulatory requirements for information supplied by the manufacturer
ISO/TR22869 : 2005 EDTN1 ISO/TR22869 : 2005 EDTN1. ISO/TR22869 : 2005 Medical laboratories – Guidance on laboratory implementation of ISO 15189:2003
ISO/TS22269 : 2005 EDTN1 ISO/TS22269 : 2005 EDTN1. ISO/TS22269 : 2005 Fire tests – Reaction to fire – Full-scale stairs test
ISO17431 : 2006 EDTN1 ISO17431 : 2006 EDTN1. ISO 17431 Fire tests – Reduced-scale model box test
PD ISO/TR 14999-3:2005 PD ISO/TR 14999-3:2005. Optics and photonics. Interferometric measurement of optical elements and optical systems. Calibration and validation of interferometric test equipment and measurements
PD ISO/TR 14999-2:2005 PD ISO/TR 14999-2:2005. Optics and photonics. Interferometric measurement of optical elements and optical systems. Measurement and evaluation techniques
BS EN 695:2005 BS EN 695:2005. Kitchen sinks. Connecting dimensions
BS EN ISO 12957-2:2005 BS EN ISO 12957-2:2005. Geotextiles. Determination of friction characteristics. Inclined plane test
BS EN 13493:2005 BS EN 13493:2005. Geosynthetic barriers. Characteristics required for use in the construction of solid waste storage and disposal sites
BS EN 1001-2:2005 BS EN 1001-2:2005. Durability of wood and wood-based products. Terminology. Vocabulary
BS EN 1001-1:2005 BS EN 1001-1:2005. Durability of wood and wood-based products. Terminology. List of equivalent terms
BS ISO 17355:2004 BS ISO 17355:2004. Space data and information transfer systems. CCSDS file delivery protocol
BS EN 61290-11-2:2005 BS EN 61290-11-2:2005. Optical amplifiers. Test methods. Polarization mode dispersion parameter. Poincaré sphere analysis method
BS EN ISO 340:2004 BS EN ISO 340:2004. Conveyor belts. Laboratory cale flammability characteristics. Requirements and test method
BS EN ISO 12625-1:2005 BS EN ISO 12625-1:2005. Tissue paper and tissue products. General guidance on terms
BS EN ISO 12957-1:2005 BS EN ISO 12957-1:2005. Geotextiles. Determination of friction characteristics. Direct shear test
BS EN ISO 10318:2005 BS EN ISO 10318:2005. Geosynthetics. Terms and definitions
05/30097499 DC 05/30097499 DC. DD prCEN/TR 15353. Guidelines for the development of standards relating to recycled plastics
BS EN 14070:2003 BS EN 14070:2003. Safety of machine tools. Transfer and special purpose machines
BS EN 62375:2004 BS EN 62375:2004. Video systems (625/50 progressive). Video and accompanied data using the vertical blanking interval. Analogue interface
BS EN 14733:2005 BS EN 14733:2005. Bitumen and bituminous binders. Bituminous emulsions, fluxed and cut-back bitumen factory production control
BS EN 60300-3-12:2004 BS EN 60300-3-12:2004. Dependability management. Application guide. Integrated logistic support
BS ISO 11237-2:2006 BS ISO 11237-2:2006. Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification. Water-based fluid applications
BS ISO 1436-2:2005 BS ISO 1436-2:2005. Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification. Water-based fluid applications
BS EN 1995-2:2004 BS EN 1995-2:2004. Eurocode 5. Design of timber structures. Bridges
BS 7624:2004 BS 7624:2004. Installation and maintenance of domestic direct gas-fired tumble dryers of up to 6 kW heat input (2nd and 3rd family gases). Specification
BS EN 4352:2004 BS EN 4352:2004. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated. Classification. 1 550 MPa (at ambient temperature) / 425°C
BS EN 4323:2004 BS EN 4323:2004. Aerospace series. Screws, 100° countersunk head, six lobe recess, threaded to head, in titanium alloy TI-P64001, anodized, MoS2 coated. Classification. 900 MPa (at ambient temperature) / 350°C
BS EN 4321:2004 BS EN 4321:2004. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification. 1 550 Mpa (at ambient temperature)/650°C
BS EN 4322:2004 BS EN 4322:2004. Aerospace series. Bolts, double hexagon head with lockwire holes, relieved shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated. Strength class. 1 100 MPa (at ambient temperature)
BS EN 4168:2004 BS EN 4168:2004. Aerospace series. Clips, spring tension, three parts. Outer clips in heat resisting steel FE-PA2601 (A286)
BS EN 4167:2004 BS EN 4167:2004. Aerospace series. Clips, spring tension, three parts. Inner clips in heat resisting steel FE-PA2601 (A286)
BS EN 4166:2004 BS EN 4166:2004. Aerospace series. Clips, spring tension, three parts. PTFE bushes
BS EN 4124:2004 BS EN 4124:2004. Aerospace series. Shank nuts, self-locking, heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread, for 60° swage. Classification. 1 210 MPa (at ambient temperature) / 730°C
BS EN 4123:2004 BS EN 4123:2004. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification. 1 550 MPa (at ambient temperature) / 600°C
BS EN 4122:2004 BS EN 4122:2004. Aerospace series. Shank nuts, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification. 1 100 MPa (at ambient temperature)/650°C
BS EN 4121:2004 BS EN 4121:2004. Aerospace series. Shank nuts, serrated, self-locking, in heat resisting steel FE- A2601 (A286), silver plated on thread. Classification: 1100 MPa (at ambient temperature) /650°C
BS EN 4119:2004 BS EN 4119:2004. Aerospace series. Nuts, bihexagonal, self-locking, deep counterbore, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification. 1 100 MPa (at ambient temperature) / 650°C
BS EN 4118:2004 BS EN 4118:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification. 1 100 MPa (at ambient temperature) / 650°C
BS EN 4013:2004 BS EN 4013:2004. Aerospace series. Shank nuts, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature) / 600°C
BS EN 4117:2004 BS EN 4117:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated on thread. Classification. 1 550 MPa (at ambient temperature) / 600°C
BS EN 4012:2004 BS EN 4012:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated. Classification. 1 550 MPa (at ambient temperature) / 425°C
BS EN 4011:2004 BS EN 4011:2004. Aerospace series. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550 MPa (at ambient temperature)/600°C
BS EN 4116:2004 BS EN 4116:2004. Aerospace series. Nuts, hexagonal, self-locking, in heat resisting steel FE-PA2601 (A286), silver plated on thread. Classification. 1 100 MPa (at ambient temperature) / 425°C
BS EN 4009:2004 BS EN 4009:2004. Aerospace series. Bolts, double hexagon head, close tolerance shank, medium length thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature)
BS EN 4054:2004 BS EN 4054:2004. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy. Technical specification
BS EN 3907:2004 BS EN 3907:2004. Aerospace series. Bolts, double hexagon head, normal shank, long thread, in titanium alloy TI-P64001, MoS2 coated. Classification: 1100MPa (at ambient temperature)/350°C
BS EN 4048:2004 BS EN 4048:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), MoS2 coated. Classification. 1 550 MPa (at ambient temperature) / 425°C. Technical specification
BS EN 3899:2004 BS EN 3899:2004. Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH). Technical specification
BS EN 3869:2004 BS EN 3869:2004. Aerospace series. Pipe couplings, loose flanges and seals. Seals in fluorocarbon rubber and armature in aluminium alloy
BS EN 3868:2004 BS EN 3868:2004. Aerospace series. Pipe couplings, loose flanges and seals. Flange connectors, welded, in titanium alloy TI-P64001
BS EN 3867:2004 BS EN 3867:2004. Aerospace series. Pipe couplings, loose flanges and seals. Flanges in titanium alloy TI-P64001
BS EN 3833:2004 BS EN 3833:2004. Aerospace series. Bolts, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), passivated. Classification: 1550 MPa (at ambient temperature) / 650°C. Technical specification
BS EN 4047:2004 BS EN 4047:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated. Classification: 1550MPa (at ambient temperature)/600°C. Technical specification
BS EN 3832:2004 BS EN 3832:2004. Aerospace series. Bolts, double hexagon head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718). Classification: 1550 MPa (at ambient temperature) / 650°C
BS EN 3831:2004 BS EN 3831:2004. Aerospace series. Inserts, thickwall, self-locking, MJ threads, in heat resisting steel FE-PM3801 (17-4PH), MoS2 coated
BS EN 3818:2004 BS EN 3818:2004. Aerospace series. Bolts, MJ threads, in titanium alloy TI-P64001. Strength class: 1100 MPa (at ambient temperature). Technical specification
BS EN 4015:2004 BS EN 4015:2004. Aerospace series. Inserts, thickwall, self-locking. Installation and removal procedure
BS EN 3752:2004 BS EN 3752:2004. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated. Classification: 1100 MPa (at ambient temperature) / 425°C. Technical specification
BS EN 4014:2004 BS EN 4014:2004. Aerospace series. Inserts, thickwall, self-locking. Design standard
BS EN 3741:2004 BS EN 3741:2004. Aerospace series. Nuts, clip, metric. Installation holes and assembly
BS EN 3726:2004 BS EN 3726:2004. Aerospace series. Nuts, self-locking, clip, in heat resisting steel FE-PA2601 (A286), MoS2 coated. Classification: 1100 MPa (at ambient temperature)/425°C
BS EN 3725:2004 BS EN 3725:2004. Aerospace series. Screws, pan head, six lobe recess, normal shank, long thread, in titanium alloy TI-P64001, anodized, MoS2 coated. Strength class: 1100 MPa (at ambient temperature)
BS EN 3724:2004 BS EN 3724:2004. Bolts, double hexagon head, relieved shank, long thread, in titanium alloy TI-P64001, MoS2 coated. Strength class: 1100 MPa (at ambient temperature)
BS EN 3152:2004 BS EN 3152:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), silver plated or uncoated. Classification: 1100 MPa (at ambient temperature)/425°C. Technical specification
BS EN 3005:2004 BS EN 3005:2004. Aerospace series. Nuts, self-locking, MJ threads, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated or uncoated. Classification: 1210 MPa (at ambient temperature) / 730°C. Technical specification
BS EN 4120:2004 BS EN 4120:2004. Nuts, bihexagonal, self-locking, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plated on thread. Classification. 1 210 MPa (at ambient temperature) / 730°C
BS EN 14714:2005 BS EN 14714:2005. Inland navigation vessels. Connection nozzle for equipment and devices at cargo tanks. Dimensions
ISO10303-109 : 2004(R08) EDTN1 ISO10303-109 : 2004(R08) EDTN1. ISO10303-109 : 2004 Industrial automation systems and integration – Product data representation and exchange. Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models
BS EN 872:2005, BS 6068-2.54:2005 BS EN 872:2005, BS 6068-2.54:2005. Water quality. Determination of suspended solids. Method by filtration through glass fibre filters
BS EN ISO 13904:2005 BS EN ISO 13904:2005. Animal feeding stuffs. Determination of tryptophan content
BS ISO 4079-2:2005 BS ISO 4079-2:2005. Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification. Water-based fluid applications
BS EN 60068-2-10:2005 BS EN 60068-2-10:2005. Environmental testing. Tests. Test J and guidance: Mould growth
BS EN 1771:2004 BS EN 1771:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of injectability and splitting test
BS EN 12614:2004 BS EN 12614:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of glass transition temperatures of polymers
BS EN 12617-2:2004 BS EN 12617-2:2004. Products and systems for the protection and repair of concrete structures. Test methods. Shrinkage of crack injection products based on polymer binder: volumetric shrinkage
BS EN 12618-2:2004 BS EN 12618-2:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Adhesion by tensile bond strength
BS EN 12618-3:2004 BS EN 12618-3:2004. Products and systems for the protection and repair of concrete structures. Test methods. Determination of the adhesion of injection products, with or without thermal cycling. Slant shear method
BS EN 12637-1:2004 BS EN 12637-1:2004. Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products. Compatibility with concrete
BS EN 14716:2004 BS EN 14716:2004. Stretched ceilings. Requirements and test methods
BS EN 12312-5:2005 BS EN 12312-5:2005. Aircraft ground support equipment. Specific requirements. Aircraft fuelling equipment
ISO18275 : 2005 EDTN1 ISO18275 : 2005 EDTN1. ISO18275 : 2005 Welding consumables – Covered electrodes for manual metal arc welding of high-strength steels – Classification
BS EN ISO 12625-9:2005 BS EN ISO 12625-9:2005. Tissue paper and tissue products. Determination of ball burst strength
BS EN ISO 12625-6:2005 BS EN ISO 12625-6:2005. Tissue paper and tissue products. Determination of grammage
BS EN ISO 12625-5:2005 BS EN ISO 12625-5:2005. Tissue paper and tissue products. Determination of wet tensile strength
BS EN ISO 12625-4:2005 BS EN ISO 12625-4:2005. Tissue paper and tissue products. Determination of tensile strength, stretch at break and tensile energy absorption
BS EN ISO 12625-3:2005 BS EN ISO 12625-3:2005. Tissue paper and tissue products. Determination of thickness, bulking thickness and apparent bulk density
ISO14590 : 2005 EDTN2 ISO14590 : 2005 EDTN2. ISO14590 : 2005 Cold-reduced steel sheet of high tensile strength and low yield point with improved formability
BS 6121-5:2005 BS 6121-5:2005. Mechanical cable glands. Code of practice for selection, installation and inspection of cable glands and armour glands
BS EN 9111:2005 BS EN 9111:2005. Aerospace series. Quality management systems. Assessment applicable to maintenance organizations
BS EN 14726:2005 BS EN 14726:2005. Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis
BS ISO 10294-5:2005 BS ISO 10294-5:2005. Fire-resistance tests. Fire dampers for air distribution systems. Intumescent fire dampers
BS EN 61047:2004 BS EN 61047:2004. D.C. or A.C. supplied electronic step-down convertors for filament lamps. Performance requirements
BS 7970:2005 BS 7970:2005. Electric cables. Metallic wire and foil sheath constructions of power cables having XLPE insulation for rated voltages from 66kV (Um = 72.5 kV) to 132kV (Um = 145 kV)
PD IEC TR 62380:2004 PD IEC TR 62380:2004. Reliability data handbook. Universal model for reliability prediction of electronics components, PCBs and equipment
BS EN ISO 7438:2005 BS EN ISO 7438:2005. Metallic materials. Bend test
BS EN 12498:2005 BS EN 12498:2005. Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of cadmium and lead in an aqueous extract
BS EN 12497:2005 BS EN 12497:2005. Paper and board. Paper and board intended to come into contact with foodstuffs. Determination of mercury in an aqueous extract
BS EN 14731:2005 BS EN 14731:2005. Execution of special geotechnical works. Group treatment by deep vibration
BS EN 14728:2005 BS EN 14728:2005. Imperfections in thermoplastic welds. Classification
BS 1435-2:2005 BS 1435-2:2005. Rubber hose assemblies for oil suction and discharge services. Recommendations for storage, testing and use
BS EN 1992-2:2005 BS EN 1992-2:2005. Eurocode 2. Design of concrete structures. Concrete bridges. Design and detailing rules
BS EN 61315:2006 BS EN 61315:2006. Calibration of fibre-optic power meters
BS ISO 15242-3:2006 BS ISO 15242-3:2006. Rolling bearings. Measuring methods for vibration. Radial spherical and tapered roller bearings with cylindrical bore and outside surface
ISO/IEC8825-5 : 2004 EDTN1 ISO/IEC8825-5 : 2004 EDTN1. ISO/IEC 8825-5 : 2004 Information Technology – ASN.1 encoding rules: Mapping W3C XML Schema Definitions into ASN.1
ISO/IEC18372 : 2004 EDTN1 ISO/IEC18372 : 2004 EDTN1. ISO/IEC18372 : 2004 Information technology – RapidlOTM interconnect specification
BS EN 61280-2-10:2005 BS EN 61280-2-10:2005. Fibre optic communication subsystem test procedures. Digital systems. Time-resolved chirp and alpha-factor measurement of laser transmitters
BS EN 13630-10:2005 BS EN 13630-10:2005. Explosives for civil uses. Detonating cords and safety fuses. Determination of initiating capability of detonating cords
BS EN 13523-24:2004 BS EN 13523-24:2004. Coil coated metals. Test methods. Resistance to blocking and pressure marking
BS EN 13523-20:2004 BS EN 13523-20:2004. Coil coated metals. Test methods. Foam adhesion
BS EN 13523-19:2004 BS EN 13523-19:2004. Coil coated metals. Test methods. Panel design and method of atmospheric exposure testing
BS EN 13523-17:2004 BS EN 13523-17:2004. Coil coated metals. Test methods. Adhesion of strippable films
BS EN 13523-16:2004 BS EN 13523-16:2004. Coil coated metals. Test methods. Resistance to abrasion
BS EN 13523-12:2004 BS EN 13523-12:2004. Coil coated metals. Test methods. Resistance to scratching
BS EN 13523-11:2004 BS EN 13523-11:2004. Coil coated metals. Test methods. Resistance to solvents (rubbing test)
BS EN 50414:2006 BS EN 50414:2006. Test methods for analysis of lead in PVC taken from insulation and sheath of electric and optical fibre cables. Method A: Total lead content determination with flame excitation atomic absorption spectrometry. Method B: Qualitative analysis of lead by lead sulphide staining
BS EN 60695-9-1:2005 BS EN 60695-9-1:2005. Fire hazard testing. Surface spread of flame. General guidance
BS EN 14719:2005 BS EN 14719:2005. Pulp, paper and board. Determination of the diisopropylnaphthalene (DIPN) content by solvent extraction
BS ISO 1830:2005 BS ISO 1830:2005. Paper, board and pulps. Determination of acid-soluble manganese
BS EN 13757-4:2005 BS EN 13757-4:2005. Communication systems for meters and remote reading of meters. Wireless meter readout (radio meter reading for operation in the 868-870 MHz SRD band)
BS ISO 5636-4:2005 BS ISO 5636-4:2005. Paper and board. Determination of air permeance (medium range). Sheffield method
05/30096155 DC 05/30096155 DC. BS 9142. Assessment methods for environmental noise. Guide
BS ISO 806:2004 BS ISO 806:2004. Aluminium oxide primarily used for the production of aluminium. Determination of loss of mass at 300 ?C and 1 000 ?C
BS EN ISO 4892-2:2006 BS EN ISO 4892-2:2006. Plastics. Methods of exposure to laboratory light sources. Xenon-arc lamps
BS EN 14712:2005 BS EN 14712:2005. Surface active agents. Determination of physical stability in alkaline and acid solutions
BS EN 14626:2005 BS EN 14626:2005. Ambient air quality. Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy
BS EN 14625:2005 BS EN 14625:2005. Ambient air quality. Standard method for the measurement of the concentration of ozone by ultraviolet photometry
BS EN 14052:2005 BS EN 14052:2005. High performance industrial helmets
BS EN 13149-5:2004 BS EN 13149-5:2004. Public transport. Road vehicle scheduling and control systems. CANopen cabling specifications
BS EN 13149-4:2004 BS EN 13149-4:2004. Public transport. Road vehicle scheduling and control systems. General application rules for CANopen transmission buses
BS EN ISO/IEC 17050-2:2004 BS EN ISO/IEC 17050-2:2004. Conformity assessment. Supplier’s declaration of conformity. Supporting documentation
04/30095958 DC 04/30095958 DC. ISO 19292. Ships and marine technology. Point-type resettable flame detectors for ships
BS EN ISO/IEC 17050-1:2004 BS EN ISO/IEC 17050-1:2004. Conformity assessment. Supplier’s declaration of conformity. General requirements
BS EN ISO/IEC 17000:2004 BS EN ISO/IEC 17000:2004. Conformity assessment. Vocabulary and general principles
DD CEN ISO/TS 24530-4:2006 DD CEN ISO/TS 24530-4:2006. Traffic and traveller information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). tpeg-ptiML
DD CEN ISO/TS 24530-3:2006 DD CEN ISO/TS 24530-3:2006. Traffic and traveller information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). tpeg-rtmML
DD CEN ISO/TS 24530-2:2006 DD CEN ISO/TS 24530-2:2006. Traffic and travel information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). tpeg-locML
DD CEN ISO/TS 24530-1:2006 DD CEN ISO/TS 24530-1:2006. Traffic and travel information (TTI). TTI via transport protocol experts group (TPEG) extensible markup language (XML). Introduction, common data types and tpegML
BS 8217:2005 BS 8217:2005. Reinforced bitumen membranes for roofing. Code of practice
BS ISO 10542-4:2004 BS ISO 10542-4:2004. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant restraint systems. Clamping-type tiedown systems
BS ISO 10542-3:2005 BS ISO 10542-3:2005. Technical systems and aids for disabled or handicapped persons. Wheelchair tiedown and occupant-restraint systems. Docking-type tiedown systems
BS ISO 7967-8:2005 BS ISO 7967-8:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Starting systems
BS ISO 7967-7:2005 BS ISO 7967-7:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Governing systems
BS ISO 7967-6:2005 BS ISO 7967-6:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Lubricating systems
BS ISO 7967-4:2005 BS ISO 7967-4:2005. Reciprocating internal combustion engines. Vocabulary of components and systems. Pressure charging and air/exhaust gas ducting systems
ISO14708-2 : 2005 EDTN1 ISO14708-2 : 2005 EDTN1. ISO14708-2 : 2005 Implants for surgery – Active implantable medical devices. Part 2 : Cardiac pacemakers
BS EN 61857-21:2004 BS EN 61857-21:2004. Electrical insulation systems. Procedures for thermal evaluation. Specific requirements for general purpose models. Wire-wound applications
BS EN 61858:2005 BS EN 61858:2005. Electrical insulation systems. Thermal evaluation of modifications to an established wire-wound EIS
BS ISO 3438:2003 BS ISO 3438:2003. Subland twist drills with Morse taper shanks for holes prior to tapping screw threads
BS EN 14713:2005 BS EN 14713:2005. Adhesives for paper and board, packaging and disposable sanitary products. Determination of friction properties of films potentially suitable for bonding
BS ISO 17853:2003 BS ISO 17853:2003. Wear of implant materials. Polymer and metal wear particles. Isolation, characterization and quantification
BS EN 61400-1:2005 BS EN 61400-1:2005. Wind turbines. Design requirements
BS EN 60974-1:2005 BS EN 60974-1:2005. Arc welding equipment. Welding power sources
BS EN 62044-2:2005 BS EN 62044-2:2005. Cores made of soft magnetic materials. Measuring methods. Magnetic properties at low excitation level
BS EN 62276:2005 BS EN 62276:2005. Single crystal wafers applied for surface acoustic wave (SAW) device applications. Specification and measuring methods
BS EN 60758:2005 BS EN 60758:2005. Synthetic quartz crystal. Specifications and guide to the use
BS ISO 5797:2004 BS ISO 5797:2004. Ships and marine technology. Windows and side scuttles for fire-resistant constructions
BS ISO 16247:2004 BS ISO 16247:2004. Road vehicles. Detection of exhaust systems leaks. Helium test method and detection device specification
BS ISO 21005:2004 BS ISO 21005:2004. Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles
BS EN 60384-14:2005 BS EN 60384-14:2005. Fixed capacitors for use in electronic equipment. Sectional specification. Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
BS ISO 3140:2005 BS ISO 3140:2005. Oil of sweet orange [Citrus sinensis (L.) Obsbeck], obtained by mechanical treatment
BS EN 451-1:2003 BS EN 451-1:2003. Method of testing fly ash. Determination of free calcium oxide content
BS 6150:2006 BS 6150:2006. Painting of buildings. Code of practice
BS ISO 2974:2005 BS ISO 2974:2005. Diesel engines. High-pressure fuel injection pipe end-connections with 60° female cone
BS ISO 13296:2005 BS ISO 13296:2005. Diesel engines. High-pressure fuel injection pipe assemblies. General requirements and dimensions
ISO16834 : 2006 EDTN1 ISO16834 : 2006 EDTN1. ISO16834 : 2006 Welding consumables – Wire electrodes, wires, rods and deposits for gas-shielded arc welding of high strength steels – Classification
BS ISO 7270-2:2005 BS ISO 7270-2:2005. Rubber. Analysis by pyrolytic gas-chromatographic methods. Determination of styrene/butadiene/isoprene ratio
DD CEN ISO/TS 17845:2004 DD CEN ISO/TS 17845:2004. Welding and allied processes. Designation system for imperfections
BS EN 14710-2:2005 BS EN 14710-2:2005. Fire-fighting pumps. Fire-fighting centrifugal pumps without primer. Verification of general and safety requirements
BS EN ISO 6506-4:2005 BS EN ISO 6506-4:2005. Metallic materials. Brinell hardness test. Table of hardness values
BS EN ISO 6506-3:2005 BS EN ISO 6506-3:2005. Metallic materials. Brinell hardness test. Calibration of reference blocks
BS EN ISO 6506-2:2005 BS EN ISO 6506-2:2005. Metallic materials. Brinell hardness test. Verification and calibration of testing machines
BS EN ISO 6506-1:2005 BS EN ISO 6506-1:2005. Metallic materials. Brinell hardness test. Test method
BS EN 12697-42:2005 BS EN 12697-42:2005. Bituminous mixtures. Test methods for hot mix asphalt. Amount of coarse foreign matter in reclaimed asphalt
BS EN ISO 389-7:2005 BS EN ISO 389-7:2005. Acoustics. Reference zero for the calibration of audiometric equipment. Reference threshold of hearing under free-field and diffuse-field listening conditions
BS EN ISO 15065:2005 BS EN ISO 15065:2005. Countersinks for countersunk head screws with head configuration in accordance with ISO 7721
BS EN 14349:2004 BS EN 14349:2004. Chemical disinfectants and antiseptics. Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in the veterinary field on non-porous surfaces without mechanical action. Test method and requirements (phase 2, step 2)
BS EN 14706:2005 BS EN 14706:2005. Thermal insulation products for building equipment and industrial installations. Determination of maximum service temperature
BS 7533-3:2005 BS 7533-3:2005. Pavements constructed with clay, natural stone or concrete pavers. Code of practice for laying precast concrete paving blocks and clay pavers for flexible pavements
BS EN ISO 139:2005 BS EN ISO 139:2005. Textiles. Standard atmospheres for conditioning and testing
BS EN 10169-2:2006 BS EN 10169-2:2006. Continuously organic coated (coil coated) steel flat products. Products for building exterior applications
DD CEN ISO/TS 15011-5:2006 DD CEN ISO/TS 15011-5:2006. Health and safety in welding and allied processes. Laboratory method for sampling fume and gases. Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials
BS ISO 1431-1:2004 BS ISO 1431-1:2004. Rubber, vulcanized or thermoplastic. Resistance to ozone cracking. Static and dynamic strain testing
ISO7240-11 : 2005 EDTN1 ISO7240-11 : 2005 EDTN1. ISO7240-11 : 2005 Fire detection and alarm systems -. Part 11: Manual call points
ISO7240-6 : 2004 EDTN1 ISO7240-6 : 2004 EDTN1. ISO7240-6 : 2004 Fire detection and alarm systems -. Part 6: Carbon monoxide fire detectors using electro-chemical cells
ISO12468-2 : 2005 EDTN 1 ISO12468-2 : 2005 EDTN 1. ISO12468-2 : 2005 External exposure of roofs to fire. Part 2: Classification of roofs
BS ISO 15886-3:2004 BS ISO 15886-3:2004. Agricultural irrigation equipment. Sprinklers. Characterization of distribution and test methods
BS ISO 15886-1:2004 BS ISO 15886-1:2004. Agricultural irrigation equipment. Definition of terms and classification
05/30094854 DC 05/30094854 DC. ISO 3746. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
06/30094836 DC 06/30094836 DC. ISO 3743-1. Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Engineering method for small movable sources in reverberant fields. Part 1. Comparison method for a hard-walled test room
BS EN 2702:2005 BS EN 2702:2005. Aerospace series. Aluminium alloy. AL-P6061. T6 or T62. Drawn or extruded bar and section. a or D ≤ 200 mm
BS EN 2635:2005 BS EN 2635:2005. Aerospace series. Aluminium alloy AL-P2014A. T6511. Extruded bar and section. a or D ≤ 200 mm with peripheral coarse grain control
BS EN 3347:2005 BS EN 3347:2005. Aerospace series. Aluminim alloy AL-P2024. T8511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 3344:2005 BS EN 3344:2005. Aerospace series. Aluminim alloy AL-P7050. T76511. Extruded bar and section. a or D $3l 150 mm with peripheral coarse grain control
BS EN 3342:2005 BS EN 3342:2005. Aerospace series. Aluminim alloy AL-P6061. T4 or T42. Drawn or extruded bar and section. a or D ≤ 150 mm
BS EN 3338:2005 BS EN 3338:2005. Aerospace series. Aluminim alloy AL-P7050. T74511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 2632:2005 BS EN 2632:2005. Aerospace series. Aluminim alloy AL-P7075. T73511. Extruded bar and section. a or D ≤ 150 mm with peripheral coarse grain control
BS EN 61000-6-2:2005 BS EN 61000-6-2:2005. Electromagnetic compatibility (EMC). Generic standards. Immunity for industrial environments
WD/ISO/IEC18056 : 2004 EDTN1 WD/ISO/IEC18056 : 2004 EDTN1. ISO/IEC18056 Information technology – Telecommunications and information exchange between systems – XML Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III
WD/ISO/IEC18051 : 2004 EDTN2 WD/ISO/IEC18051 : 2004 EDTN2. ISO/IEC18051 : 2004 Information technology – Telecommunications and information exchange between systems – Services for Computer Supported Telecommunications Applications (CSTA) Phase III
BS EN 14866:2005 BS EN 14866:2005. Vitreous and porcelain enamels. Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers. Specifications
BS EN 14863:2005 BS EN 14863:2005. Vitreous and porcelain enamels. Determination of the edge covering of enamelled steel plate to be used in heat exchangers
BS EN 14670:2005 BS EN 14670:2005. Surface active agents. Sodium dodecyl sulfate. Analytical method
BS EN 14669:2005 BS EN 14669:2005. Surface active agents. Determination of anionic surface active agents and soaps in detergents and cleansers. Potentiometric two-phase titration method
BS EN ISO 21329:2004 BS EN ISO 21329:2004. Petroleum and natural gas industries. Pipeline transportation systems. Test procedures for mechanical connectors
05/30094604 DC 05/30094604 DC. BS 7000-3. Design management systems. Part 3. Managing the design of services. Guide
BS EN 14667:2005 BS EN 14667:2005. Surface active agents. Determination of low boiling solvents in liquid formulations. Gas chromatographic method
BS EN 14666:2005 BS EN 14666:2005. Surface active agents. Determination of tetraacetyl ethylene diamine (TAED) content in TAED granules. Gas chromatographic method
BS EN 60317-22:2004 BS EN 60317-22:2004. Specifications for particular types of winding wires. Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180
BS EN 60317-18:2004 BS EN 60317-18:2004. Specifications for particular types of winding wires. Polyvinyl acetal enamelled rectangular copper wire, class 120
BS EN 60317-15:2004 BS EN 60317-15:2004. Specifications for particular types of winding wires. Polyesterimide enamelled round aluminium wire, class 180
BS EN 55016-4-2:2004 BS EN 55016-4-2:2004. Specification for radio disturbance and immunity measuring apparatus and methods. Uncertainties, statistics and limit modelling. Uncertainty in EMC measurements
BS EN 14694:2005 BS EN 14694:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of resistance to dynamic water pressure after damage by pre-treatment
BS EN 14692:2005 BS EN 14692:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the resistance to compaction of an asphalt layer
BS EN 14691:2005 BS EN 14691:2005. Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Compatibility by heat conditioning
BS EN 60704-2-5:2005 BS EN 60704-2-5:2005. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Particular requirements for electric thermal storage room heaters
BS EN 60086-3:2005 BS EN 60086-3:2005. Primary batteries. Watch batteries
EN60086-3 (IEC60086-3 : 2004) AS EN60086-3 (IEC60086-3 : 2004) AS. EN60086-3 : 2005 Primary batteries. Part 3: Watch batteries
BS EN 14705:2005 BS EN 14705:2005. Heat exchangers. Method of measurement and evaluation of thermal performances of wet cooling towers
BS EN 14700:2005 BS EN 14700:2005. Welding consumables. Welding consumables for hard-facing
BS EN ISO 22827-2:2005 BS EN ISO 22827-2:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Moving mechanism
BS EN ISO 22827-1:2005 BS EN ISO 22827-1:2005. Acceptance tests for Nd:YAG laser beam welding machines. Machines with optical fibre delivery. Laser assembly
BS EN 1545-2:2005 BS EN 1545-2:2005. Identification card systems. Surface transport applications. Transport and travel payment related data elements and code lists
BS EN 1545-1:2005 BS EN 1545-1:2005. Identification card systems. Surface transport applications. Elementary data types, general code lists and general data elements
BS EN ISO 3834-4:2005 BS EN ISO 3834-4:2005. Quality requirements for fusion welding of metallic materials. Elementary quality requirements
BS EN ISO 3834-3:2005 BS EN ISO 3834-3:2005. Quality requirements for fusion welding of metallic materials. Standard quality requirements
BS EN ISO 3834-2:2005 BS EN ISO 3834-2:2005. Quality requirements for fusion welding of metallic materials. Comprehensive quality requirements
BS EN ISO 3834-1:2005 BS EN ISO 3834-1:2005. Quality requirements for fusion welding of metallic materials. Criteria for the selection of the appropriate level of quality requirements
BS EN 1998-6:2005 BS EN 1998-6:2005. Eurocode 8. Design of structures for earthquake resistance. Towers, masts and chimneys
BS EN 1998-5:2004 BS EN 1998-5:2004. Eurocode 8. Design of structures for earthquake resistance. Foundations, retaining structures and geotechnical aspects
BS EN 1998-3:2005 BS EN 1998-3:2005. Eurocode 8. Design of structures for earthquake resistance. Assessment and retrofitting of buildings
BS EN 1998-2:2005 BS EN 1998-2:2005. Eurocode 8. Design of structures for earthquake resistance. Bridges
BS ISO 14064-2:2006 BS ISO 14064-2:2006. Greenhouse gases. Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
BS ISO 14064-1:2006 BS ISO 14064-1:2006. Greenhouse gases. Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals
BS EN 1998-1:2004 BS EN 1998-1:2004. Eurocode 8. Design of structures for earthquake resistance. General rules, seismic actions and rules for buildings
BS EN 13391:2004 BS EN 13391:2004. Mechanical tests for post-tensioning systems
BS EN 60728-11:2005 BS EN 60728-11:2005. Cable networks for television signals, sound signals and interactive services. Safety
BS 8723-2:2005 BS 8723-2:2005. Structured vocabularies for information retrieval. Guide. Thesauri
PD CEN/TR 14613:2003 PD CEN/TR 14613:2003. Thermal performance of building materials and components. Principles for the determination of thermal properties of moist materials andcomponent s
DD IEC TS 61804-1:2003 DD IEC TS 61804-1:2003. Function blocks (FB) for process control. Overview of system aspects
BS EN ISO 10139-1:2005 BS EN ISO 10139-1:2005. Dentistry. Soft lining materials for removable dentures. Materials for short-term use
BS ISO 4081:2005 BS ISO 4081:2005. Rubber hoses and tubing for cooling systems for internal-combustion engines. Specification
BS EN 60239:2005 BS EN 60239:2005. Graphite electrodes for electric arc furnaces. Dimensions and designation
BS EN 13032-1:2004 BS EN 13032-1:2004. Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Measurement and file format
BS 5871-3:2005 BS 5871-3:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Decorative fuel effect gas appliances of heat input not exceeding 20 kW (2nd and 3rd family gases)
BS 5871-1:2005 BS 5871-1:2005. Specification for the installation and maintenance of gas fires, convector heaters, fire/back boilers and decorative fuel effect gas appliances. Gas fires, convector heaters, fire/back boilers and heating stoves (2nd and 3rd family gases)
BS EN ISO 9241-110:2006 BS EN ISO 9241-110:2006. Ergonomics of human-system interaction. Dialogue principles
BS EN 60704-3:2006 BS EN 60704-3:2006. Household and similar electrical appliances. Test code for the determination of airborne acoustical noise. Procedure for determining and verifying declared noise emission values
BS ISO 14461-2:2005 BS ISO 14461-2:2005. Milk and milk products. Quality control in microbiological laboratories. Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
BS ISO 14461-1:2005 BS ISO 14461-1:2005. Milk and milk products. Quality control in microbiological laboratories. Analyst performance assessment for colony counts
BS EN 14873-2:2005 BS EN 14873-2:2005. Storage of furniture and personal effects for private individuals. Provision of the service
BS EN 14873-1:2005 BS EN 14873-1:2005. Furniture removal activities. Storage of furniture and personal effects for private individuals. Specification for storage facility and related storage provision
ISO/IEC21000-10 : 2006 EDTN1 ISO/IEC21000-10 : 2006 EDTN1. ISO/IEC21000-10 : 2006 Information technology – Multimedia framework (MPEG-21). Part 10: Digital item processing
BS EN 61857-1:2005 BS EN 61857-1:2005. Electrical insulation systems. Procedures for thermal evaluation. General requirements. Low-voltage
BS EN 14662-5:2005 BS EN 14662-5:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by solvent desorption and gas chromatography
BS EN 14662-4:2005 BS EN 14662-4:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Diffusive sampling followed by thermal desorption and gas chromatography
BS EN 61285:2004 BS EN 61285:2004. Industrial-process control. Safety of analyser houses
ISO12480-3 : 2005 EDTN1 ISO12480-3 : 2005 EDTN1. ISO12480-3 : 2005 Cranes – Safe use. Part 3: Tower cranes
ISO21128 : 2006 EDTN1 ISO21128 : 2006 EDTN1. ISO21128 : 2006 Cork Stoppers . Determination of oxidizing residues-Iodometric titration method
BS EN 14662-3:2005 BS EN 14662-3:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Automated pumped sampling with in situ gas chromatography
BS EN 14662-2:2005 BS EN 14662-2:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by solvent desorption and gas chromatography
BS EN 14662-1:2005 BS EN 14662-1:2005. Ambient air quality. Standard method for measurement of benzene concentrations. Pumped sampling followed by thermal desorption and gas chromatography
BS EN 14678-1:2006 BS EN 14678-1:2006. LPG equipment and accessories. Construction and performance of LPG equipment for automotive filling stations. Dispensers
BS EN 14665:2004 BS EN 14665:2004. Thermal spraying. Thermally sprayed coatings. Symbolic representation on drawings
BS EN 657:2005 BS EN 657:2005. Thermal spraying. Terminology, classification
BS EN 1274:2004 BS EN 1274:2004. Thermal spraying. Powders. Composition, technical supply conditions
BS 8888:2004 BS 8888:2004. Technical product specification (TPS). Specification
BS EN 60118-7:2005 BS EN 60118-7:2005. Electroacoustics. Hearing aids. Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes
BS ISO 8791-3:2005 BS ISO 8791-3:2005. Paper and board. Determination of roughness/smoothness (air leak methods). Sheffield method
BS ISO 16305:2005 BS ISO 16305:2005. Butter. Determination of firmness
BS ISO 6588-2:2005 BS ISO 6588-2:2005. Paper, board and pulps. Determination of pH of aqueous extracts. Hot extraction
BS ISO 6588-1:2005 BS ISO 6588-1:2005. Paper, board and pulps. Determination of pH of aqueous extracts. Cold extraction
BS ISO 4094:2005 BS ISO 4094:2005. Paper, board and pulps. International calibration of testing apparatus. Nomination and acceptance of standardizing and authorized laboratories
BS ISO 16790:2005 BS ISO 16790:2005. Plastics. Determination of drawing characteristics of thermoplastics in the molten state
BS ISO 20965:2005 BS ISO 20965:2005. Plastics. Determination of the transient extensional viscosity of polymer melts
BS ISO 17744:2004 BS ISO 17744:2004. Plastics. Determination of specific volume as a function of temperature and pressure (pVT diagram). Piston apparatus method
BS ISO 14490-4:2005 BS ISO 14490-4:2005. Optics and optical instruments. Test methods for telescopic systems. Test methods for astronomical telescopes
BS EN 1866:2005 BS EN 1866:2005. Mobile fire extinguishers
BS EN ISO 534:2005 BS EN ISO 534:2005. Paper and board. Determination of thickness, density and specific volume
BS EN 1514-2:2005 BS EN 1514-2:2005. Flanges and their joints. Dimensions of gaskets for PN-designated flanges. Spiral wound gaskets for use with steel flanges
BS EN ISO 9000:2005 BS EN ISO 9000:2005. Quality management systems. Fundamentals and vocabulary
DD CEN/TS 14993:2005 DD CEN/TS 14993:2005. Swap bodies for combined transport. Stackable swap bodies type A 1371.Di mensions, design requirements and testing
BS EN 12641-1:2005 BS EN 12641-1:2005. Swap bodies and commercial vehicles. Tarpaulins. Minimum requirements

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Sell: DIN Standards (DIN EN) page 18-5 In the Cheapest

July 30th, 2009 | hench2004

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Graphic technology – Prints and printing inks – Assessment of light fastness using filtered xenon arc light (ISO 12040:1997) DIN ISO 12040-1998
Graphic technology – Prepress printing process – Part 1: Correction marks for images and additional marking DIN 16549-1-1996
Graphic technology – Characterisation data for four-colour-printing – Complementary element DIN 16614-2004
Graphic symbols and signs for information of the skiers on skiing slopes DIN 32912-1983
Graphic symbols and signs for information of the passengers of ropeways and ski-lifts DIN 32911-1983
Granulated slag aggregate concrete blocks; solid, perforated, hollow blocks DIN 398-1976
Grand piano mechanism; dimensions DIN 8993-1951
Grand piano action; nomenclature of parts DIN 8991-1971
Grain-oriented electrical steel sheet and strip delivered in the fully processed state; German version EN 10107:2005 DIN EN 10107-2005
GRAFCET.顺序功能图表的规范语言 (IEC 60848:2002); 德文版本 EN 60848:2002 DIN EN 60848-2002
GRAFCET – Specification language for sequential function charts (IEC 60848:2002); German version EN 60848:2002 DIN EN 60848-2002
Grading polished diamonds-Part 1:Terminology and classification PAS 1048-1-2005
Grade 5 chain slings with hook or ring type terminal fittings DIN 5688-1-1986
Goose neck clamp DIN 6316-2009
Gold coatings for jewellery; definition, marking DIN 58682-1989
Gold alloy coverings on watch cases; requirements, testing and marking DIN 8237-1982
Gocarts – Safety requirements and testing DIN 33955-2002
Glued laminated timber – Sizes – Permissible deviations; German version EN 390:1994 DIN EN 390-1995
Glued laminated timber – Shear test glue lines; German version EN 392:1995 DIN EN 392-1996
Glued laminated timber – Performance requirements and minimum production requirements; German version EN 386:2001 DIN EN 386-2002
Glow-starters for fluorescent lamps (IEC 60155:1993 + A1:1995 + A2:2006); German version EN 60155:1995 + A1:1995 + A2:2007 DIN EN 60155-2007
Globe valves; General data DIN 3356-1-1982
Global System for Mobile communication (GSM) – Requirements for GSM operation on railways (Endorsement of the English version EN 301515 ((Ausgabe)) as German standard) DIN EN 301515-2005
Global maritime distress and safety system (GMDSS) – Part 1: Radar transponder – Marine search and rescue (SART) – Operational and performance requirements, methods of testing and required test results (IEC 61097-1:2007); German version EN 61097-1:2007 DIN EN 61097-1-2008
Glazing with sealants; rebates; requirements DIN 18545-1-1992
Glazing with sealants; rebates; glazing systems DIN 18545-3-1992
Glass; resistance to attack by a boiling aqueous solution of mixed alkali; method of test and classification; identical with ISO 695:1991 DIN ISO 695-1994
Glass; hydrolytic resistance of glass grains at 98 °C; method of test and classification; identical with ISO 719:1985 DIN ISO 719-1989
Glass; Hydrolytic resistance of glass grains at 121 °C; method of test and classification; identical with ISO 720:1985 DIN ISO 720-1989
Glass plant, pipeline and fittings; general rules for testing, handling and use DIN ISO 3586-1976
Glass plant, pipeline and fittings – Pipeline and fittings DN 15 to DN 1000 – Compatibility and interchangeability; German version EN 12585:1998 DIN EN 12585-1999
Glass packaging – Hand-held crown bottle openers – Dimensions; English version of DIN EN 14798:2006 DIN EN 14798-2006
Glass packaging – Finishes for bottles – Screw thread finishes for bottles for non-carbonated liquids; German version EN 15543:2008 DIN EN 15543-2008
Glass packaging – Cork removal devices – General requirements; English version of DIN EN 14887:2006 DIN EN 14887-2006
Glass packaging – 26 H 126 crown finish – Dimensions; German version EN 14635:2004 DIN EN 14635-2005
Glass luminaires; round hole edges for threaded ring and spring fastening; connection dimensions DIN 49999-2-1983
Glass lined steel baffles for agitator vessels – Mounting dimensions DIN 28146-1998
Glass in furniture – Test methods; German version EN 14072:2003 DIN EN 14072-2004
Glass in building; glass edges; concept, characteristics of edge types and finishes DIN 1249-11-1986
Glass in building – Thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard; German version EN 12150-2:2004 DIN EN 12150-2-2005
Glass in building – Thermally toughened soda lime silicate safety glass – Part 1: Definition and description; German version EN 12150-1:2000 DIN EN 12150-1-2000
Glass in building – Thermally toughened borosilicate safety glass – Part 1: Definition and description; German version EN 13024-1:2002 DIN EN 13024-1-2002
Glass in building – Thermally toughened alkaline earth silicate safety glass – Part 2: Evaluation of conformity/Product standard; German version EN 14321-2:2005 DIN EN 14321-2-2005
Glass in building – Thermally toughened alkaline earth silicate safety glass – Part 1: Definition and description; German version EN 14321-1:2005 DIN EN 14321-1-2005
Glass in building – Special basic products – Borosilicate glasses – Part 1-2: Evaluation of conformity/Product standard; German version EN 1748-1-2:2004 DIN EN 1748-1-2-2005
Glass in building – Special basic products – Borosilicate glasses – Part 1-1: Definitions and general physical and mechanical properties; German version EN 1748-1-1:2004 DIN EN 1748-1-1-2004
Glass in building – Security glazing – Testing and classification of resistance against manual attack; German version EN 356:1999 DIN EN 356-2000
Glass in building – Security glazing – Testing and classification of resistance against explosion pressure; German version EN 13541:2000 DIN EN 13541-2001
Glass in building – Security glazing – Testing and classification of resistance against bullet attack; German version EN 1063:1999 DIN EN 1063-2000
Glass in building – Product standard for structural and/or ultra-violet resistant sealant (for use with structural sealant glazing and/or insulating glass units with exposed seals) English version of DIN EN 15434:2006-08 DIN EN 15434-2006
Glass in building – Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data; German version EN 12603:2002 DIN EN 12603-2003
Glass in building – Pendulum tests – Impact test method and classification for flat glass; German version EN 12600:2002 DIN EN 12600-2003
Glass in building – Mirrors from silver-coated float glass for internal use – Part 2: Evaluation of conformity – Product standard; English version of DIN EN 1036-2:2008-05 DIN EN 1036-2-2008
Glass in building – Mirrors from silver-coated float glass for internal use – Part 1: Definitions, requirements and test methods;English version of DIN EN 1036-1:2008-03 DIN EN 1036-1-2008
Glass in building – Laminated glass and laminated safety glass – Part 5: Dimensions and edge finishing (ISO 12543-5:1998); German version EN ISO 12543-5:1998 DIN EN ISO 12543-5-1998
Glass in building – Laminated glass and laminated safety glass – Part 3: Laminated glass (ISO 12543-3:1998); German version EN ISO 12543-3:1998 DIN EN ISO 12543-3-1998
Glass in building – Laminated glass and laminated safety glass – Part 2: Laminated safety glass (ISO 12543-2:1998)(includes Amendment A1:2004); English version of DIN EN ISO 12543-2:2006-03 DIN EN ISO 12543-2-2006
Glass in building – Laminated glass and laminated safety glass – Evaluation of conformity/Product standard; German version EN 14449:2005 DIN EN 14449-2005
Glass in building – Insulating glass units – Part 5: Evaluation of conformity; German version EN 1279-5:2005+A1:2008 DIN EN 1279-5-2009
Glass in building – Insulating glass units – Part 3: Long term test method and requirements for gas leakage rate and for gas concentration tolerances; German version EN 1279-3:2002 DIN EN 1279-3-2003
Glass in building – Insulating glass units – Part 2: Long term test method and requirements for moisture penetration; German version EN 1279-2:2002 DIN EN 1279-2-2003
Glass in building – Heat strengthened soda lime silicate glass – Part 2: Evaluation of conformity/Product standard; German version EN 1863-2:2004 DIN EN 1863-2-2005
Glass in building – Heat strengthened soda lime silicate glass – Part 1: Definition and description; German version EN 1863-1:2000 DIN EN 1863-1-2000
Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 2: Evaluation of conformity/Product standard; German version EN 14179-2:2005 DIN EN 14179-2-2005
Glass in building – Heat soaked thermally toughened soda lime silicate safety glass – Part 1: Definition and description; German version EN 14179-1:2005 DIN EN 14179-1-2005
Glass in building – Determination of thermal transmittance (U value) – Calculation method (including Amendment A1:2000 + Amendment A2:2002); German version EN 673:1997 + A1:2000 + A2:2002 DIN EN 673-2003
Glass in building – Determination of the thermal transmittance (U value) – Heat flow meter method; German version EN 675:1997 DIN EN 675-1999
Glass in building – Determination of the thermal transmittance (U value) – Guarded hot plate method; German version EN 674:1997 DIN EN 674-1999
Glass in building – Determination of the emissivity; German version EN 12898:2001 DIN EN 12898-2001
Glass in building – Determination of the bending strength of glass – Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 DIN EN 1288-4-2000
Glass in building – Determination of the bending strength of glass – Part 2: Coaxial double ring test on flat specimens with large test surface areas; German version EN 1288-2:2000 DIN EN 1288-2-2000
Glass in building – Determination of luminous and solar characteristics of glazing; German version EN 410:1998 DIN EN 410-1998
Glass in building – Determination of energy balance value – Calculation method (ISO 14438:2002); German version EN ISO 14438:2002 DIN EN ISO 14438-2002
Glass in building – Coated glass – Part 4: Evaluation of conformity/Product standard; German version EN 1096-4:2004 DIN EN 1096-4-2005
Glass in building – Coated glass – Part 3: Requirements and test methods for class C and D coatings; German version EN 1096-3:2001 DIN EN 1096-3-2001
Glass in building – Chemically strengthened soda lime silicate glass – Part 1: Definition and description; German version EN 12337-1:2000 DIN EN 12337-1-2000
Glass in building – Basic soda lime silicate glass products – Part 9: Evaluation of conformity/Product standard; German version EN 572-9:2004 DIN EN 572-9-2005
Glass in building – Basic soda lime silicate glass products – Part 8: Supplied and final cut sizes; German version EN 572-8:2004 DIN EN 572-8-2004
Glass in building – Basic soda lime silicate glass products – Part 6: Wired patterned glass; German version EN 572-6:2004 DIN EN 572-6-2004
Glass in building – Basic soda lime silicate glass products – Part 5: Patterned glass; German version EN 572-5:2004 DIN EN 572-5-2004
Glass in building – Basic soda lime silicate glass products – Part 4: Drawn sheet glass; German version EN 572-4:2004 DIN EN 572-4-2004
Glass globes, flanged DIN 49993-1979
Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes – Part 2: Wound, filled; General quality requirements, testing DIN 16868-2-1994
Glass fibre reinforced unsaturated polyester resin (UP-GF) pipes – Part 1: Wound, filled; dimensions DIN 16868-1-1994
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joints; Reducers, Dimensions DIN 16966-5-1982
Glass fibre reinforced polyester resin (UP-GF) pipe fittings and joint assemblies; fittings; general quality requirements and testing DIN 16966-1-1988
Glass fibre reinforced polyester resin (UP-GF) pipe fittings an joints; Tees, Nozzles, Dimensions DIN 16966-4-1982
Glass fibre mat as carrier material for roll roofing and waterproofing; test procedures DIN 52142-1978
Glass containers; height and non-parallelism of finish with reference to container base; test methods (ISO 9009:1991); German version EN 29009:1994 DIN EN 29009-1994
Glass containers – Vacuum lug finishes – Part 8: 63, 66 and 70 regular (ISO 9100-8:2005); German version EN ISO 9100-8:2005 DIN EN ISO 9100-8-2005
Glass containers – Vacuum lug finishes – Part 7: 58 deep (ISO 9100-7:2005); German version EN ISO 9100-7:2005 DIN EN ISO 9100-7-2005
Glass containers – Vacuum lug finishes – Part 6: 53 and 58 regular (ISO 9100-6:2005); German version EN ISO 9100-6:2005 DIN EN ISO 9100-6-2005
Glass containers – Vacuum lug finishes – Part 4: 38 medium (ISO 9100-4:2005); English version of DIN EN ISO 9100-4:2006-02 DIN EN ISO 9100-4-2006
Glass containers – Vacuum lug finishes – Part 3: 38 regular (ISO 9100-3:2005); English version of DIN EN ISO 9100-3:2006-02 DIN EN ISO 9100-3-2006
Glass containers – Vacuum lug finishes – Part 12: 89 regular (ISO 9100-12:2005); German version EN ISO 9100-12:2005 DIN EN ISO 9100-12-2005
Glass containers – Vacuum lug finishes – Part 1: General (ISO 9100-1:2005); German version EN ISO 9100-1:2005 DIN EN ISO 9100-1-2005
Glass containers – Thermal shock resistance and thermal shock endurance – Test methods (ISO 7459:2004); German version EN ISO 7459:2004 DIN EN ISO 7459-2004
Glass containers – Resistance to vertical load – Test method (ISO 8113:2004); German version EN ISO 8113:2004 DIN EN ISO 8113-2004
Glass containers – Determination of capacity by gravimetric method – Test method (ISO 8106:2004); German version EN ISO 8106:2004 DIN EN ISO 8106-2005
Glass bottles; verticality; test method (ISO 9008:1991); German version EN 29008:1994 DIN EN 29008-1994
Glass block walls; construction and dimensioning DIN 4242-1979
Glass and glass-ceramics; Knoop hardness test; identical with ISO 9385:1990 DIN ISO 9385-1991
Glass and glass ceramics; hydrolytic resistance of the surface of glass and glass ceramic plates at 98 °C; method of test and classification DIN 52296-1989
Glass – Viscosity and viscometric fixed points – Part 7: Determination of annealing point and strain point by beam bending (ISO 7884-7:1987) DIN ISO 7884-7-1998
Glass – Viscosity and viscometric fixed points – Part 6: Determination of softening point (ISO 7884-6:1987) DIN ISO 7884-6-1998
Glass – Viscosity and viscometric fixed points – Part 5: Determination of working point by sinking bar viscometer (ISO 7884-5:1987) DIN ISO 7884-5-1998
Glass – Viscosity and viscometric fixed points – Part 4: Determination of viscosity by beam bending (ISO 7884-4:1987) DIN ISO 7884-4-1998
Glass – Viscosity and viscometric fixed points – Part 3: Determination of viscosity by fibre elongation viscometer (ISO 7884-3:1987) DIN ISO 7884-3-1998
Glass – Part 2: Terminology of glass products DIN 1259-2-2001
Glass – Part 1: Terminology for glass types and groups DIN 1259-1-2001
Glass – Determination of coefficient of mean linear thermal expansion (ISO 7991:1987) DIN ISO 7991-1998
Glands for electrical cables and wires – Part 2: Component parts DIN 89280-2-2008
Glands for electrical cables and wires – Part 1: Assembly DIN 89280-1-2008
Glands for cables; screw bushes DIN 89283-1994
German standard methods for the examination of water, waste water, and sludge – Jointly determinable substances (group F) – Part 14: Determination of phenoxyalkyl carbonic acids by gas chromatography and mass-spectrometric detection after solid-liquid-extraction and derivatization (F 14) DIN 38407-14-1994
German standard methods for the examination of water, waste water and sludge; test methods using water organisms (group L); determination of oxygen production by means of the light and dark bottle method under laboratory conditions (SPL) (L 14) (determination of oxygen production potential) DIN 38412-14-1983
German standard methods for the examination of water, waste water and sludge; summary indices of actions and substances (group H); water hardness (H 6) DIN 38409-6-1986
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); sampling of sediments (S 11) DIN 38414-11-1987
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the specific residual beta activity in sludge, sediment and suspended matter (S 15) DIN 38414-15-1990
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of the amenability to anaerobic digestion (S 8) DIN 38414-8-1985
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of oxygen consumption rate (S 6) DIN 38414-6-1986
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); determination of adsorbed organically bound halogens (AOX) (S 18) DIN 38414-18-1989
German standard methods for the examination of water, waste water and sludge; sludge and sediments (group S); detection of salmonellae in disinfected sewage sludge (S 13) DIN 38414-13-1992
German standard methods for the examination of water, waste water and sludge; physical-chemical parameters (group C); determination of total alpha activity concentration in potable water, ground water and surface water (C 14) DIN 38404-14-1987
German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of the oxidation reduction (redox) potential (C 6) DIN 38404-6-1984
German standard methods for the examination of water, waste water and sludge; physical and physico-chemical parameters (group C); determination of beta activity per unit volume in drinking water, ground water, surface water and waste water (C 15) DIN 38404-15-1987
German standard methods for the examination of water, waste water and sludge; physical and physical-chemical parameters (group C); determination of Radium-226-concentration in potable water, ground water, surface water and waste water (C 18) DIN 38404-18-1994
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of the bismut-chelating index I (H 26) DIN 38409-26-1989
German standard methods for the examination of water, waste water and sludge; parameters characterizing effects and substances (group H); determination of substances that react with disulfine blue (H 20) DIN 38409-20-1989
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of vinyl chloride by headspace gas chromatography (P 2) DIN 38413-2-1988
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of ethylenediaminetetraacetic acid (EDTA) and nitrilotriacetic acid (NTA) by polarography (P 5) DIN 38413-5-1990
German standard methods for the examination of water, waste water and sludge; individual constituents (group P); determination of carbon disulfide (P 4) DIN 38413-4-1986
German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H); determination of the phenol index (H 16) DIN 38409-16-1984
German standard methods for the examination of water, waste water and sludge; general measures of effects and substances (group H), determination of the settleable matter by mass concentration in water and waste water (H10) DIN 38409-10-1980
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of untreated water and drinking water (A 14) DIN 38402-14-1986
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of sea water (A 16) DIN 38402-16-1987
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling of flowing waters (A 15) DIN 38402-15-1986
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from barrages and lakes (A 12) DIN 38402-12-1985
German standard methods for the examination of water, waste water and sludge; general information (group A); sampling from aquifers (A 13) DIN 38402-13-1985
German standard methods for the examination of water, waste water and sludge; general information (group A); inter-laboratory tests; planning and organization (A 41) DIN 38402-41-1984
German standard methods for the examination of water, waste water and sludge; general information (group A); calibration of analytical methods, evaluation of analytical results and linear calibration functions used to determine the performance characteristics of analytical methods (A 51) DIN 38402-51-1986
German standard methods for the examination of water, waste water and sludge; general information (group A); assessment of the minimum frequency for controlling water constituents in discharges (emission strategy) (A 6) DIN 38402-6-1991
German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of ozone (G 3) DIN 38408-3-1993
German standard methods for the examination of water, waste water and sludge; gaseous components (group G); determination of chlorine dioxide (G 5) DIN 38408-5-1990
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of zinc, cadmium, lead, copper, thallium, nickel, cobalt by voltammetry (E 16) DIN 38406-16-1990
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of sodium by atomic absorption spectrometry (ASS) using an air-acetylene flame (E 14) DIN 38406-14-1992
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of potassium by atomic absorption spectrometry (AAS) using an air-acetylene flame (E 13) DIN 38406-13-1992
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of nickel by atomic absorption spectrometry (AAS) (E 11) DIN 38406-11-1991
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of iron (E 1) DIN 38406-1-1983
German standard methods for the examination of water, waste water and sludge; cations (group E); determination of dissolved silver by atomic absorption spectrometry using electrothermal atomization (E 18) DIN 38406-18-1990
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); surfactant biodegradation and elimination test for simulation of municipal waste water treatment plants (L 26) DIN 38412-26-1994
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determining the tolerance of fish to the toxicity of waste water by way of a dilution series (L 31) DIN 38412-31-1989
German standard methods for the examination of water, waste water and sludge; bio-assays (group L); determination of the inhibitory effect of waste water on the oxygen consumption of Pseudomonas putida (L 27) DIN 38412-27-1992
German standard methods for the examination of water, waste water and sludge; anions (group D); photometric determination of chromium(VI) using 1,5-diphenylcarbonohydrazide (D 24) DIN 38405-24-1987
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of sulfate ions (D 5) DIN 38405-5-1985
German standard methods for the examination of water, waste water and sludge; anions (group D); determination of dissolved silicate by spectrometry (D 21) DIN 38405-21-1990
German standard methods for the examination of water, waste water and sludge – Subanimal testing (group T) – Part 6: Toxicity to fish; Determination of the non-acute-poisonous effect of waste water to fish eggs by dilution limits (T 6) DIN 38415-6-2003
German standard methods for the examination of water, waste water and sludge – Sub-animal testing (group T) – Part 4: Determination of the genotoxic potential using the Salmonella microsome test (Ames Test) (T 4) DIN 38415-4-1999
German standard methods for the examination of water, waste water and sludge – Sub-animal testing (group T) – Part 1: Determination of cholinesterase inhibiting organophosphorus and carbamate pesticides (cholinesterase inhibition test) (T 1) DIN 38415-1-1995
German standard methods for the examination of water, waste water and sludge – Sludge and sediments (group S) – Part 24: Determination of polychlorinated dibenzodioxins (PCDD) and polychlorinated dibenzofuranes (PCDF) (S 24) DIN 38414-24-2000
German standard methods for the examination of water, waste water and sludge – Sludge and sediments (group S) – Part 23: Determination of 15 polycyclic aromatic hydrocarbons (PAH) by high performance liquid chromatography (HPLC) and fluorescence detection (S 23) DIN 38414-23-2002
German standard methods for the examination of water, waste water and sludge – Single components (group P) – Part 6: Determination of acrylamide – Methode using high performance liquid chromatography with mass spectrometric detection (HPLC-MS/MS) (P 6) DIN 38413-6-2007
German standard methods for the examination of water, waste water and sludge – Physical and physicochemical parameters (group C) – Part 3: Determination of spectral absorption in the UV range, Spectral absorptions coefficient (C 3) DIN 38404-3-2005
German standard methods for the examination of water, waste water and sludge – Physical and physico-chemical parameters (group C) – Part 10: Calcit saturation of water (C 10) DIN 38404-10-1995
German standard methods for the examination of water, waste water and sludge – Parameters characterizing effects and substances (group H) – Part 7: Determination of acid and base-neutralizing capacities (H 7) DIN 38409-7-2005
German standard methods for the examination of water, waste water and sludge – Jointly determinable substances (group F) – Part 8: Determination of 6 polynuclear aromatic hydrocarbons (PAH) in water by high performance liquid chromatography (HPLC) with fluorescence detection (F 8) DIN 38407-8-1995
German standard methods for the examination of water, waste water and sludge – Jointly determinable substances (group F) – Part 34: Determination of selected plant treatment agents, biocides and break-down products; Method using gas chromatography (GC-MS) after solid-phase micro extraction (SPME) (F 34) DIN 38407-34-2006
German standard methods for the examination of water, waste water and sludge – Jointly determinable substances (group F) – Part 30: Determination of trihalogenmethanes in bathing water and pool water with headspace-gas chromatography (F 30) DIN 38407-30-2007
German standard methods for the examination of water, waste water and sludge – Jointly determinable substances (group F) – Part 17: Determination of selected nitroaromatic compounds by gas-liquid chromatography (F 17) DIN 38407-17-1999
German standard methods for the examination of water, waste water and sludge – Jointly determinable substances (group F) – Part 16: Determination of aniline derivates by gas chromatography (F 16) DIN 38407-16-1999
German standard methods for the examination of water, waste water and sludge – Jointly determinable substances (group F) – Part 11: Determination of selected organic plant protecting agents by Automated Multiple Development (AMD)-technique (F 11) DIN V 38407-11-1995
German standard methods for the examination of water, waste water and sludge – General measures of effects and substances (group H) – Part 22: Determination of dissolved adsorbable and organically bound halogens in salt loaded water (SPE-AOX) (H 22) DIN 38409-22-2001
German standard methods for the examination of water, waste water and sludge – General informations (group A) – Part 24: Guidance on sampling of suspended sediments (A 24) DIN 38402-24-2007
German standard methods for the examination of water, waste water and sludge – General information (group A) – Part 71: Equivalance of two analytical methods based on the comparison of results and their statistical evaluation, Procedure for quantitative characteristics with continuous set of values (A 71) DIN 38402-71-2002
German standard methods for the examination of water, waste water and sludge – General information (group A) – Part 45: Interlaboratory comparisons for proficiency testing of laboratories (A 45) DIN 38402-45-2003
German standard methods for the examination of water, waste water and sludge – General information (group A) – Part 11: Sampling of waste water (A 11) DIN 38402-11-2009
German standard methods for the examination of water, waste water and sludge – Cations (group E) – Part 6: Determination of lead by atomic absorption spectrometry (AAS) (E 6) DIN 38406-6-1998
German standard methods for the examination of water, waste water and sludge – Cations (group E) – Part 33: Determination of manganese by atomic absorption spectrometry (E 33) DIN 38406-33-2000
German standard methods for the examination of water, waste water and sludge – Cations (group E) – Part 32: Determination of iron by atomic absorption spectrometry (E 32) DIN 38406-32-2000
German standard methods for the examination of water, waste water and sludge – Cations (group E) – Part 3: Determination of calcium and magnesium, complexometric method (E 3) DIN 38406-3-2002
German standard methods for the examination of water, waste water and sludge – Cations (group E) – Part 26: Determination of thallium by atomic absorption spectrometry (AAS) using electrothermal atomisation (E 26) DIN 38406-26-1997
German standard methods for the examination of water, waste water and sludge – Biological-ecological analysis of water (group M) – Part 1: Determination of the saprobic index in running waters (M 1) DIN 38410-1-2004
German standard methods for the examination of water, waste water and sludge – Bio-assays (group L) – Part 37: Determination of the inhibitory effect of water on the growth of bacteria (Photobacterium phosphoreum cell multiplication inhibition test) (L 37) DIN 38412-37-1999
German standard methods for the examination of water, waste water and sludge – Anions (group D) – Part 35: Determination of arsenic – Method by graphite furnace atomic absorption spectrometry (GF-AAS) (D 35) DIN 38405-35-2004
German standard methods for the examination of water, waste water and sludge – Anions (group D) – Part 33: Determination of iodide by spectrometry (D 33) DIN 38405-33-2001
German standard methods for the examination of water, waste water and sludge – Anions (group D) – Part 32: Determination of antimony by atomic absorption spectrometry (D 32) DIN 38405-32-2000
German standard methods for the examination of water, waste water and sludge – Anions (Group D) – Part 23: Determination of selenium by atomic absorption spectrometry (D 23) DIN 38405-23-1994
German standard methods for the determination of water, waste water and sludge – Jointly determinable substances (group F) – Part 3: Determination of polychlorinated biphenyls (F 3) DIN 38407-3-1998
German standard methods for the analysis of water, waste water and sludge; Summary action and material characteristic parameters (group H); Determination for the chemical oxygen demand (COD); short duration method (H 43) DIN 38409-43-1981
German standard methods for the analysis of water, waste water and sludge; Individual components (Group P); Determination of hydrazine (P 1) DIN 38413-1-1982
German Standard Methods for the Analysis of Water, Waste Water and Sludge; Anions (Group D); Determination of Borate Ions (D 17) DIN 38405-17-1981
German standard methods for examination of water, waste water and sludge; physical and physico-chemical characteristics (group C); determination of pH value (C5) DIN 38404-5-1984
German standard methods for examination of water, waste water and sludge; anions (group D), determination of nitrate ion (D9) DIN 38405-9-1979
German standard methods for examination of water, waste water and sludge – Anions (group D) – Part 7: Determination of cyanides in low polluted water by liquid chromatography of ions or potentiometric titration (D 7) DIN 38405-7-2002
German standard methodes for the examination of water, waste water und sludge; microbiological methods (group K); determination of Escherichia coli and coliform organisms (K6) DIN 38411-6-1991
Geotextiles and geotextile-related products – Screening test method for determining the resistance to hydrolysis in water; German version EN 12447:2001 DIN EN 12447-2002
Geotextiles and geotextile-related products – Required characteristics for use in the construction of tunnels and underground structures(includes Amendment A1:2005); English version of DIN EN 13256:2000 + A1:2005 DIN EN 13256-2005
Geotextiles and geotextile-related products – Required characteristics for use in the construction of reservoirs and dams(includes Amendment A1:2005); English version of DIN EN 13254:2000 + A1:2005 DIN EN 13254-2005
Geotextiles and geotextile-related products – Required characteristics for use in the construction of railways(includes Amendment A1:2005); English version of DIN EN 13250:2000 + A1:2005 DIN EN 13250-2005
Geotextiles and geotextile-related products – Required characteristics for use in solid waste disposals(includes Amendment A1:2005); English version of DIN EN 13257:2000 + A1:2005 DIN EN 13257-2005
Geotextiles and geotextile-related products – Required characteristics for use in external erosion control systems(includes Amendment A1:2005); English version of DIN EN 13253:2000 + A1:2005 DIN EN 13253-2005
Geotextiles and geotextile-related products – Required characteristics for use in drainage systems (includes Amendment A1:2005); English version of DIN EN 13252:2000 + A1:2005 DIN EN 13252-2005
Geotextiles and geotextile-related products – On-site quality control; German version CEN/TR 15019:2005 DIN-Fachbericht CEN/TR 15019-2005
Geotextiles and geotextile-related products – Method for installing and extracting samples in soil, and testing specimens in laboratory (ISO 13437:1998); German version EN ISO 13437:1998 DIN EN ISO 13437-1998
Geotextiles and geotextile-related products – Method for determining the microbiological resistance by a soil burial test; German version EN 12225:2000 DIN EN 12225-2000
Geotextiles and geotextile-related products – Identification on site (ISO 10320:1999); German version EN ISO 10320:1999 DIN EN ISO 10320-1999
Geotextiles and geotextile-related products – General tests for evaluation following durability testing; German version EN 12226:2000 DIN EN 12226-2000
Geotextiles and geotextile-related products – Determination of water permeability characteristics normal to the plane, without load (ISO 11058:1999); German version EN ISO 11058:1999 DIN EN ISO 11058-1999
Geotextiles and geotextile-related products – Determination of thickness at specified pressures – Part 2: Procedure for determination of thickness of single layers of multilayer products (ISO 9863-2:1996); German version EN ISO 9863-2:1996 DIN EN ISO 9863-2-1996
Geotextiles and geotextile-related products – Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; German version EN 13719:2002, Corrigenda to DIN EN 13719:2002-12; German version EN 13719:2002/AC:2005 DIN EN 13719 Berichtigung 1-2005
Geotextiles and geotextile-related products – Determination of the long term protection efficiency of geotextiles in contact with geosynthetic barriers; German version EN 13719:2002 DIN EN 13719-2002
Geotextiles and geotextile-related products – Determination of the characteristic opening size (ISO 12956:1999); German version EN ISO 12956:1999 DIN EN ISO 12956-1999
Geotextiles and geotextile-related products – Determination of tensile creep and creep rupture behaviour (ISO 13431:1999); German version EN ISO 13431:1999 DIN EN ISO 13431-1999
Geotextiles and geotextile-related products – Determination of resistance to penetration by water (hydraulic pressure test); German version EN 13562:2000 DIN EN 13562-2000
Geotextiles and geotextile-related products – Characteristics required for use in pavements and asphalt overlays; German version EN 15381:2008 DIN EN 15381-2008
Geotextiles and geotextile-related products – Abrasion damage simulation (sliding block test) (ISO 13427:1998); German version EN ISO 13427:1998 DIN EN ISO 13427-1998
Geotextiles and geotexile-related products – Strength of internal structural junctions – Part 1: Geocells (ISO 13426-1:2003); German version EN ISO 13426-1:2003 DIN EN ISO 13426-1-2003
Geotechnical investigations for civil engineering purposes – Aids to application, supplementary information DIN 4020 Bb.1-2003
Geotechnical investigation and testing – Sampling methods and groundwater measurements – Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007); German version CEN ISO/TS 22475-3:2007 DIN ISO/TS 22475-3-2008
Geotechnical investigation and testing – Laboratory testing of soil – Part 8: Unconsolidated undrained triaxial test (ISO/TS 17892-8:2004); German version CEN ISO/TS 17892-8:2004 DIN ISO/TS 17892-8-2005
Geotechnical investigation and testing – Laboratory testing of soil – Part 7: Unconfined compression test on fine-grained soil (ISO/TS 17892-7:2004); German version CEN ISO/TS 17892-7:2004 DIN ISO/TS 17892-7-2005
Geotechnical investigation and testing – Laboratory testing of soil – Part 6: Fall cone test (ISO/TS 17892-6:2004); German version CEN ISO/TS 17892-6:2004 DIN ISO/TS 17892-6-2005
Geotechnical investigation and testing – Laboratory testing of soil – Part 5: Incremental loading oedometer test (ISO/TS 17892-5:2004); German version CEN ISO/TS 17892-5:2004 DIN ISO/TS 17892-5-2005
Geotechnical investigation and testing – Laboratory testing of soil – Part 4: Determination of particle size distribution (ISO/TS 17892-4:2004); German version CEN ISO/TS 17892-4:2004 DIN ISO/TS 17892-4-2005
Geotechnical investigation and testing – Laboratory testing of soil – Part 2: Determination of density of fine grained soil (ISO/TS 17892-2:2004); German version CEN ISO/TS 17892-2:2004 DIN ISO/TS 17892-2-2005
Geotechnical investigation and testing – Laboratory testing of soil – Part 12: Determination of Atterberg limits (ISO/TS 17892-12:2004); German version CEN ISO/TS 17892-12:2004 DIN ISO/TS 17892-12-2005
Geotechnical investigation and testing – Identification and classification of soil – Part 2: Principles for a classification (ISO 14688-2:2004); German version EN ISO 14688-2:2004 DIN EN ISO 14688-2-2004
Geotechnical investigation and testing – Identification and classification of rock – Part 1: Identification and description (ISO 14689-1:2003); German version EN ISO 14689-1:2003 DIN EN ISO 14689-1-2004
Geotechnical investigation and testing – Field testing – Part 3: Standard penetration test (ISO 22476-3:2005); German version EN ISO 22476-3:2005 DIN EN ISO 22476-3-2005
Geotechnical investigation and testing – Field testing – Part 2: Dynamic probing (ISO 22476-2:2005); German version EN ISO 22476-2:2005 DIN EN ISO 22476-2-2005
Geotechnical investigation and testing – Field testing – Part 11: Flat dilatometer test (ISO/TS 22476-11:2005); German version CEN ISO/TS 22476-11:2005 DIN ISO/TS 22476-11-2005
Geosynthetics – Wide-width tensile test (ISO 10319:2008); English version of DIN EN ISO 10319:2008-10 DIN EN ISO 10319-2008
Geosynthetics – Test methods for measuring mass per unit area of clay geosynthetic barriers; German version EN 14196:2003 DIN EN 14196-2004
Geosynthetics – Terms and definitions (ISO 10318:2005); Trilingual version EN ISO 10318:2006 DIN EN ISO 10318-2006
Geosynthetics – Tensile test for joints/seams by wide-width strip method (ISO 10321:2008); German version EN ISO 10321:2008 DIN EN ISO 10321-2008
Geosynthetics – Screening test method for determining chemical resistance for landfill applications; German version EN 14414:2004 DIN EN 14414-2004
Geosynthetics – Sampling and preparation of test specimens (ISO 9862:2005); German version EN ISO 9862:2005 DIN EN ISO 9862-2005
Geosynthetics – Index test procedure for the evaluation of mechanical damage under repeated loading – Damage caused by granular material (ISO 10722:2007); English version of DIN EN ISO 10722:2007-08 DIN EN ISO 10722-2007
Geosynthetics – Determination of the protection efficiency of a geosynthetic against impact damage (ISO 13428:2005); German version EN ISO 13428:2005 DIN EN ISO 13428-2005
Geosynthetics – Determination of friction characteristics – Part 1: Direct shear test (ISO 12957-1:2005); German version EN ISO 12957-1:2005 DIN EN ISO 12957-1-2005
Geosynthetic barriers – Test method for the determination of the influence of wetting-drying cycles on the permeability of clay geosynthetic barriers; German version CEN/TS 14417:2005 DIN CEN/TS 14417-2006
Geosynthetic barriers – Test method for determining the resistance to roots; German version CEN/TS 14416:2005 DIN CEN/TS 14416-2006
Geosynthetic barriers – Test method for determining the resistance to leaching; German version EN 14415:2004 DIN EN 14415-2004
Geosynthetic barriers – Determination of permeability to liquids English version of DIN EN 14150:2006-09 DIN EN 14150-2006
Geosynthetic barriers – Characteristics required for use in transportation infrastructure; German version EN 15382:2008 DIN EN 15382-2008
Geosynthetic barriers – Characteristics required for use in the construction of solid waste storage and disposal sites; German version EN 13493:2005 DIN EN 13493-2005
Geosynthetic barriers – Characteristics required for use in the construction of liquid waste disposal sites, transfer stations or secondary containment(includes Amendment A1:2006); English version of DIN EN 13492:2006-10 DIN EN 13492-2006
Geosynthetic barriers – Characteristics required for use as a fluid barrier in the construction of tunnels and underground structures(includes Amendment A1:2006); English version of DIN EN 13491:2006-10 DIN EN 13491-2006
Geometry and stability of ships – Symbols, terms, definitions – Part 6: Sailing ships DIN 81209-6-2003
Geometry and stability of ships – Symbols, terms, definitions – Part 3: Multihull surface ships DIN 81209-3-2003
Geometry and stability of ships – Symbols, terms, definitions – Part 2: Submarines DIN 81209-2-1999
Geometrical product specifikations (GPS) – General concepts and requirements for GPS measuring equipment (ISO 14978:2006); German version EN ISO 14978:2006, Corrigendum to DIN EN ISO 14978:2006-11; German version EN ISO 14978:2006/AC:2008 DIN EN ISO 14978 Berichtigung 1-2008
Geometrical product specifikations (GPS) – General concepts and requirements for GPS measuring equipment (ISO 14978:2006); English version of DIN EN ISO 14978:2006-11 DIN EN ISO 14978-2006
Geometrical product specifications (GPS) – System of limits and fits – Part 2: Limit gauges and gauging for plain cylindrical workpieces, Corrigenda to DIN 7150-2:2007-02 DIN 7150-2 Berichtigung 1-2007
Geometrical product specifications (GPS) – System of limits and fits – Part 2: Limit gauges and gauging for plain cylindrical workpieces DIN 7150-2-2007
Geometrical Product Specifications (GPS) – Surface texture: Profile method; Measurement standards – Part 1: Material measures (ISO 5436-1:2000); German version EN ISO 5436-1:2000 DIN EN ISO 5436-1-2000
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Terms, definitions and surface texture parameters (ISO 4287:1997); German version EN ISO 4287:1998 DIN EN ISO 4287-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Surfaces having stratified functional properties – Part 2: Height characterization using the linear material ratio curve (ISO 13565-2:1996); German version EN ISO 13565-2:1997 DIN EN ISO 13565-2-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Surfaces having stratified functional properties – Part 1: Filtering and general measurement conditions (ISO 13565-1:1996); German version EN ISO 13565-1:1997 DIN EN ISO 13565-1-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Rules and procedures for the assessment of surface texture (ISO 4288:1996); German version EN ISO 4288:1997 DIN EN ISO 4288-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Nominal characteristics of contact (stylus) instruments (ISO 3274:1996); German version EN ISO 3274:1997 DIN EN ISO 3274-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Motif parameters (ISO 12085:1996); German version EN ISO 12085:1997 DIN EN ISO 12085-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Metrological characteristics of phase correct filters (ISO 11562:1996); German version EN ISO 11562:1997 DIN EN ISO 11562-1998
Geometrical Product Specifications (GPS) – Surface texture: Profile method – Calibration of contact (stylus) instruments (ISO 12179:2000); German version EN ISO 12179:2000 DIN EN ISO 12179-2000
Geometrical product specifications (GPS) – Straightness – Part 2: Specification operators (ISO/TS 12780-2:2003); German version CEN ISO/TS 12780-2:2007 DIN ISO/TS 12780-2-2008
Geometrical product specifications (GPS) – Straightness – Part 1: Vocabulary and parameters of straightness (ISO/TS 12780-1:2003); German version CEN ISO/TS 12780-1:2007 DIN ISO/TS 12780-1-2008
Geometrical product specifications (GPS) – Straight edges – Part 3: Granite straight edges; dimensions, technical delivery conditions DIN 874-3-2008
Geometrical product specifications (GPS) – Standard reference temperature for geometrical product specification and verification – Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 16015:2003) DIN EN ISO 1 Bb.1-2004
Geometrical product specifications (GPS) – Squares 90° – Part 2: Granite squares 90° DIN 875-2-2008
Geometrical Product Specifications (GPS) – Squares 90° – Part 1: Steel squares 90° DIN 875-1-2005
Geometrical product specifications (GPS) – Series of conical tapers and taper angles; Values for setting taper angles and setting heights DIN 254-2003
Geometrical product specifications (GPS) – Series of conical tapers and taper angles (ISO 1119:1998); German version EN ISO 1119:2002 DIN EN ISO 1119-2003
Geometrical product specifications (GPS) – Series of angles and slopes on prisms (ISO 2538:1998); German version EN ISO 2538:2003 DIN EN ISO 2538-2003
Geometrical product specifications (GPS) – Roundness – Part 2: Specification operators (ISO/TS 12181-2:2003); German version CEN ISO/TS 12181-2:2007 DIN ISO/TS 12181-2-2008
Geometrical product specifications (GPS) – Roundness – Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003); German version CEN ISO/TS 12181-1:2007 DIN ISO/TS 12181-1-2008
Geometrical product specifications (GPS) – Reference gauges for gap gauges from 1 mm to 315 mm nominal size DIN 2253-2006
Geometrical product specifications (GPS) – Mechanical dial gauges – Limits for metrological characteristics DIN 878-2006
Geometrical product specifications (GPS) – Limit plug gauges – Part 2: For holes over 40 mm up to 65 mm nominal diameter DIN 2245-2-2008
Geometrical product specifications (GPS) – Limit plug gauges – Part 1: For holes from 1 mm up to 40 mm nominal diameter DIN 2245-1-2008
Geometrical product specifications (GPS) – Limit gap gauges and forged gauging members over 3 mm up to 100 mm nominal size DIN 2231-2008
Geometrical product specifications (GPS) – Length standards – Gauge blocks (ISO 3650:1998); German version EN ISO 3650:1998 DIN EN ISO 3650-1999
Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment – Part 1: Decision rules for proving conformance or non-conformance with specifications (ISO 14253-1:1998); German version EN ISO 14253-1:1998 DIN EN ISO 14253-1-1999
Geometrical product specifications (GPS) – Inspection by measurement of workpieces and measuring equipment – Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification (ISO/TS 14253-2:1999) DIN EN ISO 14253-1 Bb.1-2000
Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002, Corrigendum to DIN EN ISO 1302:2002-06 DIN EN ISO 1302 Berichtigung 1-2008
Geometrical Product Specifications (GPS) – Indication of surface texture in technical product documentation (ISO 1302:2002); German version EN ISO 1302:2002 DIN EN ISO 1302-2002
Geometrical product specifications (GPS) – Guidelines for the evaluation of coordinate measuring machine (CMM) test uncertainty (ISO/TS 23165:2006) DIN ISO/TS 23165-2008
Geometrical product specifications (GPS) – Graduated rules, rules for manufacturing purposes – Design, requirements DIN 866-2006
Geometrical product specifications (GPS) – Graduated rules, rules for inspection purposes – Design, requirements DIN 865-2006
Geometrical product specifications (GPS) – GO ring gauges and setting ring gauges – Part 2: From 1 mm up to 315 mm nominal diameter for precision mechanics DIN 2250-2-2008
Geometrical product specifications (GPS) – GO ring gauges and setting ring gauges – Part 1: From 1 mm up to 315 mm nominal diameter DIN 2250-1-2008
Geometrical Product Specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005 DIN EN ISO 1101-2008
Geometrical product specifications (GPS) – Geometrical tolerancing – Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006); English version of DIN EN ISO 2692:2007-04 DIN EN ISO 2692-2007
Geometrical product specifications (GPS) – General concepts – Part 1: Model for geometrical specification and verification (ISO/TS 17450-1:2005); German version CEN ISO/TS 17450-1:2007 DIN ISO/TS 17450-1-2008
Geometrical product specifications (GPS) – Gauges for cylindrical fits and fits of plan surfaces – Survey, inscription, marking DIN 2259-2008
Geometrical product specifications (GPS) – Gauge in dimensional metrology – Requirements and testing DIN 2239-2006
Geometrical product specifications (GPS) – Gap gauges “NOT GO” with forged gauging member over 3 mm up to 100 mm nominal size DIN 2233-2008
Geometrical product specifications (GPS) – Gap gauges “GO” with forged gauging member over 3 mm up to 100 mm nominal size DIN 2232-2008
Geometrical product specifications (GPS) – Flatness – Part 2: Specification operators (ISO/TS 12781-2:2003); German version CEN ISO/TS 12781-2:2007 DIN ISO/TS 12781-2-2008
Geometrical product specifications (GPS) – Flatness – Part 1: Vocabulary and parameters of flatness (ISO/TS 12781-1:2003); German version CEN ISO/TS 12781-1:2007 DIN ISO/TS 12781-1-2008
Geometrical product specifications (GPS) – Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007); German version EN ISO 10135:2009 DIN EN ISO 10135-2009
Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); German version EN ISO 463:2006, Corrigenda to DIN EN ISO 463:2006-06; German version EN ISO 463:2006/AC 1:2007 DIN EN ISO 463 Berichtigung 1-2008
Geometrical Product Specifications (GPS) – Dimensional measuring equipment – Design and metrological characteristics of mechanical dial gauges (ISO 463:2006); English version of DIN EN ISO 463:2006-06 DIN EN ISO 463-2006
Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008-09 DIN EN ISO 8062-3-2008
Geometrical product specifications (GPS) – Cylindricity – Part 2: Specification operators (ISO/TS 12180-2:2003); German version CEN ISO/TS 12180-2:2007 DIN ISO/TS 12180-2-2008
Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement – Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004); German version CEN ISO/TS 15530-3:2007 DIN ISO/TS 15530-3-2008
Geometrical Product Specifications (GPS) – Acceptance test and reverification test for coordinate measuring machines (CMM) – Part 3: CMMs with the axis of a rotary table as the fourth axis (ISO 10360-3:2000); German version EN ISO 10360-3:2000 DIN EN ISO 10360-3-2000
Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007); German version EN ISO 10360-6:2001+AC:2007 DIN EN ISO 10360-6-2009
Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 5: CMMs using multiple stylus probing systems (ISO 10360-5:2000); German version EN ISO 10360-5:2000 DIN EN ISO 10360-5-2001
Geometrical Product Specifications (GPS) – Acceptance and reverification tests for coordinate measuring machines (CMM) – Part 1: Vocabulary (ISO 10360-1:2000 + Corr 1:2002) (includes Corrigendum AC:2002); German version EN ISO 10360-1:2000 + AC:2002 DIN EN ISO 10360-1-2003
Geometrical Product Specifications (GPS) – “NOT GO” screw plug gauges – Part 3: “NOT GO” workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2283-3-2001
Geometrical Product Specifications (GPS) – “NOT GO” screw gauging members – Part 3: “NOT GO” workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2284-3-2001
Geometrical Product Specifications (GPS) – “NOT GO” screw gauging members – Part 2: “NOT GO” workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter DIN 2284-2-2001
Geometrical product specifications (GPS) – “NOT GO” plug gauges – Part 5: With cylindrical gauging member for holes over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2247-5-2008
Geometrical product specifications (GPS) – “NOT GO” plug gauges – Part 4: With segmental cylindrical gauging member over 120 mm up to 200 mm nominal diameter DIN 2247-4-2008
Geometrical product specifications (GPS) – “NOT GO” plug gauges – Part 3: With cylindrical gauging member for holes over 40 mm up to 120 mm nominal diameter DIN 2247-3-2008
Geometrical product specifications (GPS) – “NOT GO” plug gauges – Part 2: With rod gauge for holes over 40 mm up to 500 mm nominal diameter DIN 2247-2-2008
Geometrical product specifications (GPS) – “NOT GO” plug gauges – Part 1: For holes from 1 mm up to 40 mm nominal diameter DIN 2247-1-2008
Geometrical product specifications (GPS) – “NOT GO” gauging members – Part 4: Cylindrical gauging members for holes over 40 mm up to 120 mm nominal diameter DIN 2249-4-2008
Geometrical product specifications (GPS) – “NOT GO” gauging members – Part 3: Segmental cylindrical gauging members for holes over 120 mm up to 200 mm nominal diameter DIN 2249-3-2008
Geometrical product specifications (GPS) – “NOT GO” gauging members – Part 2: Rod gauge for holes over 40 mm up to 500 mm nominal diameter DIN 2249-2-2008
Geometrical product specifications (GPS) – “GO” screw ring gauges for ISO metric screw threads – Part 2: Nominal diameter over 50 mm up to 200 mm, precision mechanics DIN 2285-2-2008
Geometrical product specifications (GPS) – “GO” screw ring gauges for ISO metric screw threads – Part 1: Nominal diameter from 1 mm up to 200 mm, general purpose DIN 2285-1-2008
Geometrical Product Specifications (GPS) – “GO” screw plug gauges – Part 3: “GO” workshop gauges and check plug gauges for ISO metric screw threads over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2281-3-2001
Geometrical Product Specifications (GPS) – “GO” screw plug gauges – Part 2: “GO” workshop gauges, check and setting plug gauges for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter DIN 2281-2-2001
Geometrical Product Specifications (GPS) – “GO” screw gauging members – Part 2: “GO” workshop gauges, check and setting gauging members for ISO general purpose metric screw threads over 40 mm up to 200 mm nominal diameter DIN 2282-2-2001
Geometrical product specifications (GPS) – “GO” plug gauges – Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2246-4-2008
Geometrical product specifications (GPS) – “GO” plug gauges – Part 3: For holes over 40 mm up to 120 mm nominal diameter DIN 2246-3-2008
Geometrical product specifications (GPS) – “GO” plug gauges – Part 2: For holes over 120 mm up to 200 mm nominal diameter DIN 2246-2-2008
Geometrical product specifications (GPS) – “GO” plug gauges – Part 1: For holes from 1 mm up to 40 mm nominal diameter DIN 2246-1-2008
Geometrical product specifications (GPS) – “GO” gauging members – Part 4: For holes over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2248-4-2008
Geometrical product specifications (GPS) – “GO” gauging members – Part 3: For holes over 120 mm up to 200 mm nominal diameter DIN 2248-3-2008
Geometrical product specifications (GPS) – “GO” gauging members – Part 2: For holes over 40 mm up to 120 mm nominal diameter DIN 2248-2-2008
Geometrical product specifications – Linear dimensioning and tolerancing: ? limit deviations – Step dimensions, dimensions, distances, angular sizes and radii (ISO/TR 16570:2004) DIN-Fachbericht ISO/TR 16570-2008
Geometrical Product Specification (GPS) – NOT GO screw ring gauges for ISO metric screw threads – Part 1: Nominal diameter from 1 mm up to 200 mm; General purposes DIN 2299-1-2003
Geometrical Product Specification (GPS) – Handles – Part 2: For gauging members over 40 mm nominal diameter; Handles, fixing screws and clamps DIN 2240-2-2001
Geometrical Product Specification (GPS) – Handles – Part 1: For gauging members with taper lock 1:50 up to 40 mm nominal diameter DIN 2240-1-2001
Geometrical product specification (GPS) – Geometrical tolerancing – Positional tolerancing (ISO 5458:1998); German version EN ISO 5458:1998 DIN EN ISO 5458-1999
Geometrical optics – Nomenclature and definitions DIN 1335-2003
Geometrical design of cylindrical internal involute gear pairs; Diagrams for geometrical limits of internal gear-pinion matings DIN 3993-2-1981
Geographic information – Web map server interface (ISO 19128:2005); English version EN ISO 19128:2008 DIN EN ISO 19128-2008
Geographic information – Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructure; German version CEN/TR 15449:2006 DIN-Fachbericht CEN/TR 15449-2007
Geographic information – Spatial referencing by coordinates (ISO 19111:2007); English version EN ISO 19111:2007 DIN EN ISO 19111-2007
Geographic information – Simple feature access – Part 2: SQL option (ISO 19125-2:2004); English version EN ISO 19125-2:2006 DIN EN ISO 19125-2-2006
Geographic information – Simple feature access – Part 1: Common architecture (ISO 19125-1:2004); English version EN ISO 19125-1:2006 DIN EN ISO 19125-1-2006
Geographic information – Services (ISO 19119:2005); English version EN ISO 19119:2006 DIN EN ISO 19119-2006
Geographic information – Quality principles (ISO 19113:2002); English version EN ISO 19113:2005 DIN EN ISO 19113-2005
Geographic information – Procedures for item registration (ISO 19135:2005); English version EN ISO 19135:2007 DIN EN ISO 19135-2007
Geographic information – Portrayal (ISO 19117:2005); English version EN ISO 19117:2006 DIN EN ISO 19117-2006
Geographic information – Methodology for feature cataloguing (ISO 19110:2005); English version EN ISO 19110:2006 DIN EN ISO 19110-2006
Geographic information – Metadata (ISO 19115:2003); English version EN ISO 19115:2005 DIN EN ISO 19115-2005
Geographic information – Location-based services – Reference model (ISO 19132:2007); English version EN ISO 19132:2008 DIN EN ISO 19132-2009
Geographic information – Location-based services – Multimodal routing and navigation (ISO 19134:2007); English version EN ISO 19134:2008 DIN EN ISO 19134-2009
Geographic information – Encoding (ISO 19118:2005); English version EN ISO 19118:2006 DIN EN ISO 19118-2006
Geographic information – Data product specifications (ISO 19131:2007); English version EN ISO 19131:2008 DIN EN ISO 19131-2008
Geographic information – Core profile of the spatial schema (ISO 19137:2007); English version EN ISO 19137:2008 DIN EN ISO 19137-2008
Geographic information – Conformance and testing (ISO 19105:2000); English version EN ISO 19105:2005 DIN EN ISO 19105-2005
Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz – 300 GHz) – General public; German version EN 50371:2002 DIN EN 50371-2002
Generic specification; fixed RF wound inductors; German version EN 129000:1993 DIN EN 129000-1994
Generic specification: travelling wave amplifier tubes; German version EN 135000:1992 DIN EN 135000-1993
Generic specification: Printed boards; German version EN 123000:1992/A1:1995 DIN EN 123000/A1-1996
Generic specification: printed boards; german version EN 123000:1991 DIN EN 123000-1992
Generic specification: magnetrons; German version EN 136000:1992 DIN EN 136000-1993
Generic specification: Fibre optic branching devices; German version EN 181000:1994 DIN EN 181000-1995
Generic specification: Fibre optic attenuators; German version EN 180000:1995 DIN EN 180000-1996
Generic specification: cathode ray tubes; German version EN 111000:1991 DIN EN 111000-1993
Generic specification – Printed boards; Amendment A2; German version EN 123000:1991/A2:1996 DIN EN 123000/A2-1997
Generic specification – Electromechanical all-or-nothing relays – Part 3: Test and measurement procedures; German version EN 116000-3:1996 DIN EN 116000-3-1996
Generic specification – Cores made of ferrite materials; German version EN 125000:1997 DIN EN 125000-1998
Generic specification – Camera tubes; German version EN 113000:1991 DIN EN 113000-1996
Generator Sets with Reciprocating Internal Combustion Engines; Connection Dimensions for Generators and Reciprocating Internal Combustion Engines DIN 6281-1978
Generating sets – Uninterruptible power supply – Part 12: Dynamic UPS systems with and without reciprocating internal combustion engines DIN 6280-12-1996
General tolerances for vessels; general-purpose vessels DIN 28005-1-1988
General tolerances for vessels – Part 2: Glass lined vessels DIN 28005-2-2001
General tolerances for linear and angular dimensions and geometrical tolerances (not to be used for new designs) DIN 7168-1991
General tolerances for agitator vessels; agitator vessels for general use DIN 28006-1-1986
General requirements for establishing anthropometric databases (ISO 15535:2006);German version EN ISO 15535:2006 DIN EN ISO 15535-2008
General requirements for components used in pneumatically pressurized discharge pipes, drains and sewers; German version EN 1293:1999 DIN EN 1293-1999
General requirements for components used in discharge pipes, drains and sewers for gravity systems; German version EN 476:1997 DIN EN 476-1997
General requirements for components specifically designed for use in trenchless construction of drains and sewers; German version EN 14457:2004 DIN EN 14457-2004
General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996); Trilingual version EN 45011:1998 DIN EN 45011-1998
General requirements for a discontinuously laid roof covering DIN-Fachbericht 35-1992
General purpose three-phase induction motors having standard dimensions and outputs – Frame numbers 56 to 315 and flange numbers 65 to 740; German version EN 50347:2001 DIN EN 50347-2003
General purpose lead-acid batteries (valve-regulated types) – Part 2: Dimensions, terminals and marking (IEC 61056-2:2002); German version EN 61056-2:2003 DIN EN 61056-2-2003
General purpose knuckle threads – Part 2: Deviations and tolerances DIN 405-2-1997
General purpose ISO metric screw threads – Part 25: Limits of sizes for fine pitch threads with the prefered tolerance classes – Nominal diameter from 182 mm to 250 mm DIN 13-25-2005
General purpose ISO metric screw threads – Part 24: Limits of sizes for fine pitch threads with the prefered tolerance classes – Nominal diameter from 112 mm to 180 mm8 DIN 13-24-2005
General purpose ISO metric screw threads – Part 23: Limits of sizes for fine pitch threads with the prefered tolerance classes – Nominal diameter from 53 mm to 110 mm DIN 13-23-2005
General purpose bolts and screws – Metric series – Radii under the head (ISO 885:2000) DIN ISO 885-2001
General purpose adhesives for structural assembly – Requirements and test methods; English version of DIN EN 15274:2008-01 DIN EN 15274-2008
General principles on reliability for structures; list of equivalent terms; identical with ISO 8930:1987 DIN ISO 8930-1991
General principles of design of fibrous (gypsum) plaster works; German version EN 15319:2007 DIN EN 15319-2007
General Principles for the Safety Design of Technical Products DIN 31000-1979
General methods of test for pigments and extenders – Part 8: Determination of matter soluble in water; Cold extraction method (ISO 787-8:2000); German version EN ISO 787-8:2000 DIN EN ISO 787-8-2001
General methods of test for pigments and extenders – Part 3: Determination of matter soluble in water; Hot extraction method (ISO 787-3:2000); German version EN ISO 787-3:2000 DIN EN ISO 787-3-2001
General methods of test for pigments and extenders – Part 23: Determination of density (using a centrifuge to remove entrained air) (ISO 787-23:1979); German version EN ISO 787-23:1995 DIN EN ISO 787-23-1995
General methods of test for pigments and extenders – Part 19: Determination of water-soluble nitrates (salicylic acid method) (ISO 787-19:1974); German version EN ISO 787-19:1995 DIN EN ISO 787-19-1995
General methods of test for pigments and extenders – Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:1986); German version EN ISO 787-15:1995 DIN EN ISO 787-15-1995
General methods of test for pigments and extenders – Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002); German version EN ISO 787-14:2002 DIN EN ISO 787-14-2002
General methods of test for pigments and extenders – Part 13: Determination of water-soluble sulphates, chlorides and nitrates (ISO 787-13:2002); German version EN ISO 787-13:2002 DIN EN ISO 787-13-2002
General methods of test for pigments and extenders – Part 11: Determination of tamped volume and apparent density after tamping (ISO 787-11:1981); German version EN ISO 787-11:1995 DIN EN ISO 787-11-1995
General methods of test for pigments and extenders – Part 10: Determination of density; pyknometer method (ISO 787-10:1993); German version EN ISO 787-10:1995 DIN EN ISO 787-10-1995
General methods of measurement for digital television receivers (IEC 62028:2002); German version EN 62028:2004 DIN EN 62028-2004
General mathematical symbols and concepts DIN 1302-1999
General lighting service lamps; round bulb signal lamps, pigmy signal lamps; restricted temperature design DIN 49812-4-1993
General lighting service lamps; round bulb lamps, large candle lamps DIN 49812-2-1993
General lighting service lamps; rough service lamps DIN 49810-3-1993
General lighting service lamps; bulbs for explosion- and flame-proof portable DIN 49810-5-1993
General guide for designing of technical equipments to satisfy safety requirements (Amendment 1) DIN 31000/A1-2007
General guidance for the marking of gas appliances; German translation of CEN-Report CR 1472 DIN-Fachbericht 68-1997
General Definitions and Specification Factors for Gears, Gear Pairs and Gear Trains DIN 868-1976
General classification of insulating liquids (IEC 61039:1990); German version HD 618 S1:1992 DIN IEC 61039-1995
Gemetrical product specifications (GPS) – “NOT GO” gauging members – Part 5: Cylindrical gauging members for holes over 40 mm up to 250 mm nominal diameter for precision mechanics DIN 2249-5-2008
Gel permeation chromatography (GPC) – Part 3: Water as elution solvent, Corrigendum to DIN 55672-3:2007-08 DIN 55672-3 Berichtigung 1-2009
Gel permeation chromatography (GPC) – Part 2: N,N-Dimethylacetamide (DMAC) as elution solvent DIN 55672-2-2008
Gel permeation chromatography (GPC) – Part 1: Tetrahydrofuran (THF) as elution solvent DIN 55672-1-2007
Gears with round flanks for fine mechanics; indication on drawings DIN 58425-6-1980
Gears with round flanks for fine mechanics; gear tool profile DIN 58425-5-1980
Gears with round flanks for fine mechanics; gear profile DIN 58425-2-1980
Gears for coal ploughs and underground chain-conveyors; signs for gears DIN 20097-1968
Gear notation; symbols DIN 3999-1974
Gauging of hexagon sockets (ISO 23429:2004); German version EN ISO 23429:2004 DIN EN ISO 23429-2004
Gauges for lampholders with protective collar for fluorescent lamps DIN 49670-1986
Gauges C17, for concentricity of fuse-bases DIN 49518-1979
Gates in fixed guard rails on the deck of sea-going vessels DIN 81703-1993
Gate valves flat sided of gun metall with screwed bonnet and flanges, DN 20 to DN 100, PN 16 DIN 86720-2002
Gasmeter connections – Part 2: One pipe connection; DVGW code of practice DIN 3376-2-2005
Gas-loaded accumulators for fluid power applications; English version EN 14359:2007-02 DIN EN 14359-2007
Gaslamps and lighting fittings; incandescent mantle DIN 5042-3-1980
Gaslamps and lighting fittings; ignition burner, hanging structure DIN 5042-5-1979
Gaslamps and lighting fittings; definition, classification DIN 5042-1-1980
Gaslamps and lighting fittings; ceramic mouthpieces DIN 5042-2-1974
Gaskets for oval flanges DIN 71511-1992
Gaskets for gas supply – Part 6: Gasket materials based on synthetic fibres, graphite or polytetrafluoroethylen (PTFE) for gas valves, gas appliances and gas mains DIN 3535-6-1999
Gasket sheets for ship building – Requirements and tests DIN 86076-2007
Gasket grooves and folds for cast-metal cable fittings DIN 47635-1973
Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kW – Part 1: Safety; German version EN 12752-1:1999 DIN EN 12752-1-1999
Gas-fired overhead radiant heaters – Ventilation requirements for non-domestic premises; German version EN 13410:2001 DIN EN 13410-2002
Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners; German version EN 26:1997+AC:1998+A1:2000+A2:2004+A3:2006 DIN EN 26-2007
Gas-fired insets for heating more than one room; English version of DIN EN 14438:2007-03 DIN EN 14438-2007
Gas-fired domestic appliances producing hot water – Appliances not exceeding 70 kW heat input and 300 l water storage capacity – Part 2: Assessment of energy consumption; English version of DIN EN 13203-2:2006-11 DIN EN 13203-2-2006
Gas-fired central heating boilers; Type C boilers of nominal heat input not exceeding 70 kW; German version EN 483:1999/A2:2001, Corrigenda to DIN EN 483/A2:2002-05; German version EN 483:1999/A2:2001/AC:2006 DIN EN 483/A2 Berichtigung 1-2007
Gas-fired central heating boilers; Type C boilers of nominal heat input not exceeding 70 kW; German version EN 483:1999 DIN EN 483-2000
Gas-fired central heating boilers – Type C boilers of nominal heat input not exceeding 70 kW; Amendment A2; German version EN 483:1999/A2:2001 DIN EN 483/A2-2002
Gas-fired central heating boilers – Type B boilers, fitted with atmospheric burners of nominal heat input not exceeding 70 kW; German version EN 297:1994 + A1:1994 + A2:1996 + A3:1996 + A4:2004 + A5:1998 + A6:2003 DIN EN 297-2005
Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 70 kW, but not exceeding 300 kW; English version of DIN EN 656/A1:2006-12 DIN EN 656/A1-2006
Gas-fired central heating boilers – Type B boilers of nominal heat input exceeding 300 kW, but not exceeding 1000 kW; English version of DIN EN 13836:2007-06 DIN EN 13836-2007
Gas-fired central heating boilers – Specific requirements for condensing boilers with a nominal heat input not exceeding 70 kW; German version EN 677:1998 DIN EN 677-1998
Gasfired catering equipment; glass ceramic hobs requirements and testing DIN 3363-3-1992
Gas-fired absorption and adsorption air-conditioning and/or heat pump appliances with a net heat input not exceeding 70 kW – Part 2: Rational use of energy; German version EN 12309-2:2000 DIN EN 12309-2-2000
Gas-filled compartments for a.c. switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV; German version EN 50187:1996 DIN EN 50187-1997
Gaseous fuels and other gases; types, constituents, application DIN 1340-1990
Gaseous fuels and other gases – Calculation of calorific value, density, relative density and Wobbe index of pure gases and gas mixtures DIN 51857-1997
Gas-appliances; household cooking appliances for gaseous fuels; heating ranges DIN 3360-4-1985
Gas-appliances; gas-burners for laboratory use (laboratory burners) DIN 30665-1-1982
Gas-appliances; corn-dryingplant DIN 3379-1975
Gas-appliances with atmospheric burners terminology; requirements, testing, marking DIN 3362-1990
Gas-appliances for laundry-machinery DIN 30682-1982
Gas/air ratio controls for gas burners and gas burning appliances – Part 2: Electronic types; German version EN 12067-2:2004 DIN EN 12067-2-2004
Gas/air ratio controls for gas burners and gas burning appliances – Part 1: Pneumatic types; Amendment A1; German version EN 12067-1:1998/A1:2003 DIN EN 12067-1/A1-2003
Gas welding equipment – Terminology – Terms used for gas welding equipment; Trilingual version EN 13622:2002 DIN EN 13622-2002
Gas welding equipment – Specification for hose assemblies for equipment for welding, cutting and allied processes; English version of DIN EN 1256:2008-03 DIN EN 1256-2008
Gas welding equipment – Safety devices – Part 2: Not incorporating a flame (flashback) arrestor; German version EN 730-2:2002 DIN EN 730-2-2003
Gas welding equipment – Safety devices – Part 1: Incorporating a flame (flashback) arrestor; German version EN 730-1:2002 DIN EN 730-1-2003
Gas welding equipment – Rubber hoses for welding, cutting and allied processes; German version EN 559:2003 DIN EN 559-2003
Gas welding equipment – Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2007); English version of DIN EN ISO 14113:2009-01 DIN EN ISO 14113-2009
Gas welding equipment – Pressure regulators for manifold systems used in welding, cutting and allied processes up to 300 bar (ISO 7291:1999); German version EN ISO 7291:2001 DIN EN ISO 7291-2001
Gas welding equipment – Pressure gauges used in welding, cutting and allied processes; German version EN 562:2003 DIN EN 562-2003
Gas welding equipment – Industrial manual and machine oxygen-fuel gases blowpipes for flame heating and allied processes (CR 13259:1998) DIN V 32528-1999
Gas welding equipment – Hose connections for equipment for welding, cutting and allied processes(includes Corrigendum AC:2007); English version of DIN EN 560:2008-03 DIN EN 560-2008
Gas welding equipment – Blowpipes for gas welding, heating and cutting – Specifications and tests (ISO 5172:2006) English version of DIN EN ISO 5172:2006-08 DIN EN ISO 5172-2006
Gas welding equipment – Acetylene manifold systems for welding, cutting and allied processes – General requirements (ISO 14114:1999); German version EN ISO 14114:1999 DIN EN ISO 14114-1999
Gas valves; angle pattern ball shut-off valves with compression coupling DIN 3431-1986
Gas valves; angle pattern ball shut-off valves DIN 3430-1986
Gas turbines – Procurement – Part 5: Applications for petroleum and natural gas industries (ISO 3977-5:2001); German and English version EN ISO 3977-5:2003 DIN EN ISO 3977-5-2008
Gas tightness of equipment for gas welding and allied processes; identical with ISO 9090:1989 DIN ISO 9090-1990
Gas supply systems – Welding steel pipework – Functional requirements; German version EN 12732:2000 DIN EN 12732-2000
Gas supply systems – Unterground gas storage – Part 2: Functional recommendations for storage in oil and gas fields; German version EN 1918-2:1998 DIN EN 1918-2-1998
Gas supply systems – Underground gas storage – Part 5: Functional recommendations for surface facilities; German version EN 1918-5:1998 DIN EN 1918-5-1998
Gas supply systems – Underground gas storage – Part 3: Functional recommendations for storage in solution-mined salt cavities; German version EN 1918-3:1998 DIN EN 1918-3-1998
Gas supply systems – Underground gas storage – Part 1: Functional recommendations for storage in aquifers; German version EN 1918-1:1998 DIN EN 1918-1-1998
Gas supply systems – Pressure testing, commissioning and decomissioning procedures – Functional requirements; German version EN 12327:2000 DIN EN 12327-2000
Gas supply systems – Pipelines for maximum operating pressure up to and including 16 bar – Part 2: Specific functional recommendations for polyethylene (MOP up to and including 10 bar); German version EN 12007-2:2000 DIN EN 12007-2-2000
Gas supply systems – Guideline for safety management systems for natural gas transmission pipelines; German version CEN/TS 15174:2006 DIN CEN/TS 15174-2006
Gas supply systems – Gas pressure regulating stations for transmission and distribution – Functional requirements; German version EN 12186:2000 + A1:2005, Corrigenda to DIN EN 12186:2006-01 DIN EN 12186 Berichtigung 1-2008
Gas supply systems – Gas pressure regulating installations on service lines – Functional requirements; English version of DIN EN 12279:2000 + A1:2005 DIN EN 12279-2005
Gas supply systems – Compressor stations – Functional requirements; German version EN 12583:2000 DIN EN 12583-2000
Gas supply – Gas pipework for buildings – Maximum operating pressure less than or equal to 5 bar – Functional recommendations; German version EN 1775:2007 DIN EN 1775-2007
Gas pressure regulators for inlet pressures up to 100 bar; German version EN 334:2005 DIN EN 334-2005
Gas pressure regulators and safety devices for gas installations for inlet pressure up to 5 bar DIN 33822-2009
Gas pipelines; size 3 valve box DIN 3583-1990
Gas pipelines; size 2 valve box DIN 3582-1990
Gas pipelines indicating labels DIN 4065-1974
Gas meters – Turbine gas meters(includes Amendment A1:2006) ; English version of DIN EN 12261:2007-07 DIN EN 12261-2007
Gas meters – Rotary displacement gas meters; German version EN 12480:2002+A1:2006, Corrigenda to DIN EN 12480:2007-09 DIN EN 12480 Berichtigung 1-2008
Gas meters – Diaphragm meters; German version EN 1359:1998 + A1:2006, Corrigendum to DIN EN 1359:2007-06 DIN EN 1359 Berichtigung 1-2008
Gas meters – Diaphragm meters(includes Amendment A1:2006); English version of DIN EN 1359:2007-06 DIN EN 1359-2007
Gas meters – Conversion devices – Part 1: Volume conversion (includes Amendment A1:2006); English version of DIN EN 12405-1:2007-08 DIN EN 12405-1-2007
Gas meter connections – Part 1: Two pipes connection; DVGW code of practice DIN 3376-1-2005
Gas heated catering equipment; convection-ovens DIN 3363-2-1986
Gas heated catering equipment – Part 2-9 Specific requirements – Solid tops, warming plates and griddles; English version of DIN EN 203-2-9:2006-02 DIN EN 203-2-9-2006
Gas heated catering equipment – Part 2-7: Specific requirements – Salamanders and rotisseries; English version of DIN EN 203-2-7:2007-08 DIN EN 203-2-7-2007
Gas heated catering equipment – Part 2-6: Specific requirements – Hot water heaters for beverage; English version of DIN EN 203-2-6:2006-02 DIN EN 203-2-6-2006
Gas heated catering equipment – Part 2-4: Specific requirements – Fryers; English version of DIN EN 203-2-4:2006-02 DIN EN 203-2-4-2006
Gas heated catering equipment – Part 2-3: Specific requirements – Boiling pans; English version of DIN EN 203-2-3:2006-02 DIN EN 203-2-3-2006
Gas heated catering equipment – Part 2-10: Specific requirements – Chargrills; English version of DIN EN 203-2-10:2007-07 DIN EN 203-2-10-2007
Gas heated catering equipment – Part 1: General safety rules; German version EN 203-1:2005 DIN EN 203-1-2005
Gas explosion venting protective systems English version of DIN EN 14994:2007-05 DIN EN 14994-2007
Gas cylinders – Valve protection caps and valve guards – Design, construction and tests (ISO 11117:2008); German version EN ISO 11117:2008 DIN EN ISO 11117-2009
Gas cylinders – Terminology (ISO 10286:2007); Trilingual version EN ISO 10286:2007 DIN EN ISO 10286-2007
Gas cylinders – Stamp marking (ISO 13769:2002); English version of DIN EN ISO 13769:2006-09 DIN EN ISO 13769-2006
Gas cylinders – Residual pressure valves – General requirements and type testing (ISO 15996:2005+Amd 1:2007)(includes Amendment A1:2007); English version of DIN EN ISO 15996:2008-04 DIN EN ISO 15996-2008
Gas cylinders – Refillable seamless steel gas cylinders – Acoustic emission testing (AT) for periodic inspection (ISO 16148:2006) English version of DIN EN ISO 16148:2006-08 DIN EN ISO 16148-2006
Gas cylinders – Procedures for change of gas service (ISO 11621:1997); German version EN ISO 11621:2005 DIN EN ISO 11621-2008
Gas cylinders – Precautionary labels (ISO 7225:2005); English version of DIN EN ISO 7225:2008-02 DIN EN ISO 7225-2008
Gas cylinders – Parallel threads for connection of valves to gas cylinders – Part 1: Specifications (ISO 15245-1:2001); German version EN ISO 15245-1:2001 DIN EN ISO 15245-1-2003
Gas cylinders – Outlet connections for gas cylinder valves for compressed breathable air – Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); German version EN ISO 12209-3:2000 DIN EN ISO 12209-3-2001
Gas cylinders – Outlet connections for gas cylinder valves for compressed breathable air – Part 2: Threaded connections (ISO 12209-2:2000); German version EN ISO 12209-2:2000 DIN EN ISO 12209-2-2001
Gas cylinders – Outlet connections for gas cylinder valves for compressed breathable air – Part 1: Yoke type connections (ISO 12209-1:2000); German version EN ISO 12209-1:2000 DIN EN ISO 12209-1-2001
Gas cylinders – Identification and marking using radio frequency identification technology – Part 2: Numbering schemes for radio frequency identification (ISO 21007-2:2005); English version of DIN EN ISO 21007-2 DIN EN ISO 21007-2-2005
Gas cylinders – Identification and marking using radio frequency identification technology – Part 1: Reference architecture and terminology (ISO 21007-1:2005); English version of DIN EN ISO 21007-1 DIN EN ISO 21007-1-2005
Gas cylinders – Gases and gas mixtures – Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures (ISO 10156-2:2005); German version EN ISO 10156-2:2005, Corrigenda to DIN EN ISO 10156-2:2005-10; German version EN ISO 10156-2:2005/AC:2006 DIN EN ISO 10156-2 Berichtigung 1-2006
Gas cylinders – Gases and gas mixtures – Part 2: Determination of oxidizing ability of toxic and corrosive gases and gas mixtures (ISO 10156-2:2005); English version of DIN EN ISO 10156-2 DIN EN ISO 10156-2-2005
Gas cylinders – Gas cylinder valve connections for use in the microelectronic industry – Part 2: Specification and type testing for valve to cylinder connections (ISO 10692-2:2001); German version EN ISO 10692-2:2001 DIN EN ISO 10692-2-2003
Gas cylinders – Gas cylinder valve connections for use in the microelectronic industry – Part 1: Outlet connections (ISO 10692-1:2001); German version EN ISO 10692-1:2001 DIN EN ISO 10692-1-2003
Gas cylinder valves – Part 5: For test pressure up to 450 bar max.; Outlet connections DIN 477-5-2002
Gas cooled bushings for hydrogen cooled generators DIN 48124-3-1980
Gas appliances; forced air gasburners with ventilation in bakeries DIN 30683-2-1984
Gas appliances – Fuel cell gas heating appliances – Fuel cell gas heating appliance of nominal heat input inferior or equal to 70 kW; German version EN 50465:2008 DIN EN 50465-2009
Gas analyzers – Expression of performance – Part 3: Paramagnetic oxygen analyzers (IEC 61207-3:2002); German version EN 61207-3:2002 DIN EN 61207-3-2002
Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 8: Diffusion method (ISO 6145-8:2005); English version of DIN EN ISO 6145-8:2008-11 DIN EN ISO 6145-8-2008
Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 6: Critical orifices (ISO 6145-6:2003); English version of DIN EN ISO 6145-6:2008-11 DIN EN ISO 6145-6-2008
Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 4: Continuous syringe injection method (ISO 6145-4:2004); English version of DIN EN ISO 6145-4:2008-11 DIN EN ISO 6145-4-2008
Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 11: Electrochemical generation (ISO 6145-11:2005); English version of DIN EN ISO 6145-11:2008-11 DIN EN ISO 6145-11-2008
Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 10: Permeation method (ISO 6145-10:2002); English version of DIN EN ISO 6145-10:2008-11 DIN EN ISO 6145-10-2008
Gas analysis – Preparation of calibration gas mixtures using dynamic volumetric methods – Part 1: Methods of calibration (ISO 6145-1:2003); German version EN ISO 6145-1:2008 DIN EN ISO 6145-1-2008
Gas analysis – Preparation of calibration gas mixtures – Static volumetric method (ISO 6144:2003); English version of DIN EN ISO 6144:2006-11 DIN EN ISO 6144-2006
Gas analysis – Preparation of calibration gas mixtures – Gravimetric method (ISO 6142:2001); English version of DIN EN ISO 6142:2006-11 DIN EN ISO 6142-2006
Gas analysis – Investigation and treatment of analytical bias (ISO 15796:2005); English version of DIN EN ISO 15796:2008-11 DIN EN ISO 15796-2008
Gas analysis – Handling of calibration gases and gas mixtures – Guidelines (ISO 16664:2004); English version of DIN EN ISO 16664:2008-11 DIN EN ISO 16664-2008
Gas analysis – Determination of the water dew point of natural gas – Cooled surface condensation hygrometers (ISO 6327:1981); English version of DIN EN ISO 6327:2008-04 DIN EN ISO 6327-2008
Gas analysis – Conversion of gas mixture composition data (ISO 14912:2003); English version of DIN EN ISO 14912:2006-11 DIN EN ISO 14912-2006
Gas analysis – Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001); English version of DIN EN ISO 6143:2006-11 DIN EN ISO 6143-2006
Garden tools – Non motorized hand-held tools for using in soil – Performance characteristics, requirements and testing DIN 8471-2005
Garden equipments – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge-trimmers – Mechanical safety (includes amendment A1:2001); German version EN 786:1996 + A1:2001 DIN EN 786-2001
Garden equipment – Powered lawnmowers – Safety; German version EN 836:1997/A3:2004 DIN EN 836/A3-2004
Garden equipment – Powered lawnmowers – Safety; German version EN 836:1997/A1:1997 DIN EN 836/A1-1998
Garden equipment – Powered lawnmowers – Safety; German version EN 836:1997, Corrigenda to DIN EN 836:1997-09; German version EN 836:1997/AC:2006 DIN EN 836 Berichtigung 1-2006
Garden equipment – Powered lawnmowers – Safety; German version EN 836:1997 DIN EN 836-1997
Garden equipment – Pedestrian controlled lawn aerators and scarifiers – Safety; German version EN 13684:2004 DIN EN 13684-2004
Garden equipment – Integrally powered shredders/chippers – Safety; German version EN 13683:2003, Corrigenda to DIN EN 13683:2004-03 DIN EN 13683 Berichtigung 1-2007
Garden equipment – Integrally powered shredders/chippers – Safety; German version EN 13683:2003 DIN EN 13683-2004
Garden equipment – Hand-held, integrally powered hedge trimmers – Safety; Amendment A3; German version EN 774:1996/A3:2001 DIN EN 774/A3-2002
Garden equipment – Electrically powered walk-behind and hand-held lawn trimmers and lawn edge-trimmers – Mechanical safety (includes amendment A1:2001); German version EN 786:1996+A1:2001, Corrigenda to DIN EN 786:2001-12 DIN EN 786 Berichtigung 1-2005
Garbage containers; garbage containers for special wastes; with a capacity 1000 l for liquid special wastes DIN 30741-2-1992
Gall’s chains DIN 8150-1984

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Update for DIN Standards Collection-2010-11(13)

July 30th, 2009 | hench2004

http://www.findstandards.info
http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Quote: Hench2004@sina.com
DIN EN 14701-4:2010 Characterization of sludges – Filtration properties – Part 4: Determination of the drainability of flocculated sludges; German version EN 14701-4:2010
DIN EN 15182-1:2010 Hand-held branchpipes for fire service use – Part 1: Common requirements; German version EN 15182-1:2007+A1:2009
DIN EN 15182-2:2010 Hand-held branchpipes for fire service use – Part 2: Combination branchpipes PN 16; German version EN 15182-2:2007+A1:2009
DIN EN 15182-3:2010 Hand-held branchpipes for fire service use – Part 3: Smooth bore jet and/or one fixed spray jet angle branchpipes PN 16; German version EN 15182-3:2007+A1:2009
DIN EN 15182-4:2010 Hand-held branchpipes for fire service use – Part 4: High pressure branchpipes PN 40; German version EN 15182-4:2007+A1:2009
DIN EN 15254-5:2010 Extended application of results from fire resistance tests – Non-loadbearing walls – Part 5: Metal sandwich panel construction; German version EN 15254-5:2009
DIN EN 15269-7:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware – Part 7: Fire resistance for steel sliding doorsets; German version EN 15269-7:2
DIN EN 15841:2010 Ambient air quality – Standard method for determination of arsenic, cadmium, lead and nickel in atmospheric deposition; German version EN 15841:2009
DIN EN 54-23:2010 Fire detection and fire alarm systems – Part 23: Fire alarm devices – Visual alarm devices; German version EN 54-23:2010
DIN EN 343:2010 Protective clothing – Protection against rain; German version EN 343:2003+A1:2007 + AC:2009
DIN EN 1366-5:2010 Fire resistance tests for service installations – Part 5: Service ducts and shafts; German version EN 1366-5:2010
DIN EN 13238:2010 Reaction to fire tests for building products – Conditioning procedures and general rules for selection of substrates; German version EN 13238:2010
DIN EN 15843:2010 Water quality – Guidance standard on determining the degree of modification of river hydromorphology; German version EN 15843:2010
DIN EN 15848:2010 Water conditioning equipment inside buildings – Adjustable chemical dosing systems – Requirements for performance, safety and testing; German version EN 15848:2010
DIN 5510-2:2009 Preventive fire protection in railway vehicles – Part 2: Fire behaviour and fire side effects of materials and parts – Classification, requirements and test methods
DIN EN 1634-3 Berichtigung 1:2009 Fire resistance tests for door and shutter assemblies – Part 3: Smoke control doors and shutters; German version EN 1634-3:2004, Corrigenda to DIN EN 1634-3:2005-01; German version EN 1634-3:2004/AC:2006
DIN EN 1777:2010 Hydraulic platforms (HPs) for fire fighting and rescue services – Safety requirements and testing; German version EN 1777:2010
DIN EN 1991-1-2 Berichtigung 1:2009 Eurocode 1 – Actions on structures – Part 1-2: General actions – Actions on structures exposed to fire; German version EN 1991-1-2:2002, Corrigendum to DIN EN 1991-1-2:2003-09; German version EN 1991-1-2:2002/AC:2009
DIN EN 1995-1-2 Berichtigung 1:2009 Eurocode 5: Design of timber structures – Part 1-2: General – Structural fire design; German version EN 1995-1-2:2004 + AC:2006, Corrigendum to DIN EN 1995-1-2:2006-10; German version EN 1995-1-2:2004/AC:2009
DIN EN 12254:2010 Screens for laser working places – Safety requirements and testing; German version EN 12254:2010
DIN EN 15269-1:2010 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware – Part 1: General requirements; German version EN 15269-1:2010
DIN EN 13523-1:2010 Coil coated metals – Test methods – Part 1: Film thickness; German version EN 13523-1:2009
DIN EN 15461/A1:2010 Railway applications – Noise emission – Characterisation of the dynamic properties of track sections for pass by noise measurements; German and English version EN 15461:2008/FprA1:2010
DIN EN 13363-1 Berichtigung 1:2009 Solar protection devices combined with glazing – Calculation of solar and light transmittance – Part 1: Simplified method; German version EN 13363-1:2003+A1:2007, Corrigendum to DIN EN 13363-1:2007-09; German version EN 13363-1:2003+A1:2007/AC:2008 (Forei
DIN EN 12668-1:2010 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 1: Instruments; German version EN 12668-1:2010
DIN EN 15856:2010 Non-destructive testing – Acoustic emission – General principles of AE testing for the detection of corrosion within metallic surrounding filled with liquid; German version EN 15856:2010
DIN EN 15857:2010 Non-destructive testing – Acoustic emission – Testing of fibre-reinforced polymers – Specific methodology and general evaluation criteria; German version EN 15857:2010
DIN EN 12668-2:2010 Non-destructive testing – Characterization and verification of ultrasonic examination equipment – Part 2: Probes; German version EN 12668-2:2010
DIN EN 1515-4:2010 Flanges and their joints – Bolting – Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC; German version EN 1515-4:2009
DIN EN 15427:2010 Railway applications – Wheel/rail friction management – Flange lubrication; German version EN 15427:2008
DIN EN 12819:2010 LPG equipment and accessories – Inspection and requalification of LPG tanks greater than 13 m; German version EN 12819:2009
DIN EN 15001-2:2010 Gas infrastructure – Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations – Part 2: Detailed functional requirements for commissioning
DIN EN 15632-2:2010 District heating pipes – Pre-insulated flexible pipe systems – Part 2: Bonded plastic service pipes – Requirements and test methods; German and English version EN 15632-2:2010
DIN EN 15632-3:2010 District heating pipes – Pre-insulated flexible pipe systems – Part 3: Non bonded system with plastic service pipes – Requirements and test methods; German and English version EN 15632-3:2010
DIN 8061:2009 Unplasticized polyvinyl chloride (PVC-U) pipes – General quality requirements and testing
DIN 8062:2009 Unplasticized polyvinyl chloride (PVC-U) pipes – Dimensions
DIN 8079:2009 Chlorinated polyvinyl chloride (PVC-C) pipes – Dimensions
DIN 16834:2009 Polyethylene pipes of raised temperature resistance (PE-RT) – PE-RT Type I and PE-RT Type II – Dimensions
DIN EN 1057:2010 Copper and copper alloys – Seamless, round copper tubes for water and gas in sanitary and heating applications; German version EN 1057:2006+A1:2010
DIN EN 12162:2010 Liquid pumps – Safety requirements – Procedure for hydrostatic testing; German version EN 12162:2001+A1:2009
DIN EN 12817:2010 LPG Equipment and accessories – Inspection and requalification of LPG tanks up to and including 13 m; German version EN 12817:2010
DIN EN 13121-3:2010 GRP tanks and vessels for use above ground – Part 3: Design and workmanship; German version EN 13121-3:2008+A1:2010
DIN EN 13785:2010 Regulators with a capacity of up to and including 100 kg/h, having a maximum nominal outlet pressure of up to and including 4 bar, other than those covered by EN 12864 and their associated safety devices for butane, propane or their mixtures; German versi
DIN 8080:2009 Chlorinated polyvinyl chloride (PVC-C) pipes – General quality requirements, testing
DIN 16833:2009 Polyethylene pipes of raised temperature resistance (PE-RT) – PE-RT Type I and PE-RT Type II – General quality requirements, testing
DIN EN 10253-4 Berichtigung 1:2009 Butt-welding pipe fittings – Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements; German version EN 10253-4:2008, Corrigendum to DIN EN 10253-4:2008-06; German version EN 10253-4:2008/AC:2009
DIN 2303:2007 Welding and allied processes – Quality requirements for production and maintenance companies for military products
DIN EN 287-6:2010 Qualification test of welders – Fusion welding – Part 6: Cast iron; German version EN 287-6:2010
DIN EN 1708-1:2010 Welding – Basic welded joint details in steel – Part 1: Pressurized components; German version EN 1708-1:2010
DIN EN 12622:2010 Safety of machine tools – Hydraulic press brakes; German version EN 12622:2009

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm
http://www.findstandards.info

Quote: Hench2004@sina.com

Update for ISO Standards Collection-2010-10(8)

July 30th, 2009 | hench2004

http://www.findstandards.info
http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Quote: Hench2004@sina.com

ISO 15893:2010 Space data and information transfer systems – Space communications protocol specification (SCPS) – Transport protocol (SCPS-TP)
ISO 22647:2010 Space data and information transfer systems – Space link identifiers
ISO 10537:2010 Space data and information transfer systems – Encapsulation service
ISO 13526:2010 Space data and information transfer systems – Tracking data message
ISO 13527:2010 Space data and information transfer systems – XML formatted data unit (XFDU) structure and construction rules
ISO 13541:2010 Space data and information transfer systems – Attitude data messages
ISO 11790:2010 Copper, lead, zinc and nickel concentrates – Guidelines for the inspection of mechanical sampling systems
ISO 13680:2010 Petroleum and natural gas industries – Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock – Technical delivery conditions
ISO 10678:2010 Fine ceramics (advanced ceramics, advanced technical ceramics) – Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
ISO 13007-1:2010 Ceramic tiles – Grouts and adhesives – Part 1: Terms, definitions and specifications for adhesives
ISO 13007-2:2010 Ceramic tiles – Grouts and adhesives – Part 2: Test methods for adhesives
ISO 13007-3:2010 Ceramic tiles – Grouts and adhesives – Part 3: Terms, definitions and specifications for grouts
ISO 13007-4:2010 Ceramic tiles – Grouts and adhesives – Part 4: Test methods for grouts
ISO/IEC 19793/Cor1:2010 Information technology – Open Distributed Processing – Use of UML for ODP system specifications – Corrigendum 1
ISO 10110-8:2010 Optics and photonics – Preparation of drawings for optical elements and systems – Part 8: Surface texture; roughness and waviness
ISO/TS 10867:2010 Nanotechnologies – Characterization of single-wall carbon nanotubes using near infrared photoluminescence spectroscopy
ISO 8536-4:2010 Infusion equipment for medical use – Part 4: Infusion sets for single use, gravity feed
ISO 12863:2010 Standard test method for assessing the ignition propensity of cigarettes
ISO 18437-2/Amd1:2010 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials – Part 2: Resonance method – Amendment 1
ISO 18437-3/Amd1:2010 Mechanical vibration and shock – Characterization of the dynamic mechanical properties of visco-elastic materials – Part 3: Cantilever shear beam method – Amendment 1
ISO 11382:2010 Optics and photonics – Optical materials and components – Characterization of optical materials used in the infrared spectral range from 0,78 m to 25 m
ISO 21507:2010 Earth-moving machinery – Performance requirements for non-metallic fuel tanks
ISO 3632-2:2010 Spices – Saffron (Crocus sativus L.) – Part 2: Test methods
ISO 4647:2010 Rubber, vulcanized – Determination of static adhesion to textile cord – H-pull test
ISO 27547-1:2010 Plastics – Preparation of test specimens of thermoplastic materials using mouldless technologies – Part 1: General principles, and laser sintering of test specimens
ISO 8394-1:2010 Building construction – Jointing products – Part 1: Determination of extrudability of sealants
ISO 8394-2:2010 Building construction – Jointing products – Part 2: Determination of extrudability of sealants using standardized apparatus
ISO/IEC 24727-3/Cor1:2010 Identification cards – Integrated circuit card programming interfaces – Part 3: Application interface – Corrigendum 1
ISO/IEC 19775-2:2010 Information technology – Computer graphics and image processing – Extensible 3D (X3D) – Part 2: Scene access interface (SAI)
ISO 6472:2010 Rubber compounding ingredients – Symbols and abbreviated terms
ISO/TR 11769:2010 Intelligent transport systems – Communications access for land mobiles (CALM) – Data retention for law enforcement
ISO 24500:2010 Ergonomics – Accessible design – Auditory signals for consumer products
ISO 14729/Amd1:2010 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses – Amendment 1
ISO 28218:2010 Radiation protection – Performance criteria for radiobioassay
ISO/TS 29843-1:2010 Soil quality – Determination of soil microbial diversity – Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis
ISO 30011:2010 Workplace air – Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry
ISO 12952-1:2010 Textiles – Assessment of the ignitability of bedding items – Part 1: Ignition source: smouldering cigarette
ISO 12952-2:2010 Textiles – Assessment of the ignitability of bedding items – Part 2: Ignition source: match-flame equivalent
ISO 3741:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Precision methods for reverberation test rooms
ISO 3743-1:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for small movable sources in reverberant fields – Part 1: Comparison method for a hard-walled test room
ISO 3744:2010 Acoustics – Determination of sound power levels and sound energy levels of noise sources using sound pressure – Engineering methods for an essentially free field over a reflecting plane
ISO 225:2010 Fasteners – Bolts, screws, studs and nuts – Symbols and descriptions of dimensions
ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
ISO 13956:2010 Plastics pipes and fittings – Decohesion test of polyethylene (PE) saddle fusion joints – Evaluation of ductility of fusion joint interface by tear test
ISO 18752/Amd1:2010 Rubber hoses and hose assemblies – Wire- or textile-reinforced single-pressure types for hydraulic applications – Specification – Amendment 1
ISO 11148-3:2010 Hand-held non-electric power tools – Safety requirements – Part 3: Drills and tappers
ISO 11148-4:2010 Hand-held non-electric power tools – Safety requirements – Part 4: Non-rotary percussive power tools
ISO 11148-6:2010 Hand-held non-electric power tools – Safety requirements – Part 6: Assembly power tools for threaded fasteners
ISO 28706-5:2010 Vitreous and porcelain enamels – Determination of resistance to chemical corrosion – Part 5: Determination of resistance to chemical corrosion in closed systems
ISO 28721-4:2010 Vitreous and porcelain enamels – Glass-lined apparatus for process plants – Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm
http://www.findstandards.info

Quote: Hench2004@sina.com

Update for BSI Standards Collection-2010-7(17)

July 30th, 2009 | hench2004

http://www.findstandards.info
http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Quote: Hench2004@sina.com

BS ISO 25119-3:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Series development, hardware and software
BS ISO 25119-4:2010 Tractors and machinery for agriculture and forestry. Safety-related parts of control systems. Production, operation, modification and supporting processes
BS ISO 27875:2010 Space systems. Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages
BS ISO 28641:2010 Rubber compounding ingredients. Organic chemicals. General test methods
BS ISO 29301:2010 Microbeam analysis. Analytical transmission electron microscopy. Methods for calibrating image magnification by using reference materials having periodic structures
BS ISO 29621:2010 Cosmetics. Microbiology. Guidelines for the risk assessment and identification of microbiologically low-risk products
BS ISO 8820-3:2010 Road vehicles. Fuselinks. Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)
BS ISO/IEC 15420:2009 Information technology. Automatic identification and data capture techniques. EAN/UPC bar code symbology specification
BS 5335-1:1991+A2:2010 Continental quilts. Specification for quilts containing fillings other than feather and/or down
BS 8525-1:2010 Greywater systems. Code of practice
BS EN 1106:2010 Manually operated taps for gas burning appliances
BS EN 12568:2010 Foot and leg protectors. Requirements and test methods for toecaps and penetration resistant inserts
BS EN 13000:2010 Cranes. Mobile cranes
BS EN 15650:2010 Ventilation for buildings. Fire dampers
BS EN 15723:2010 Railway applications. Closing and locking devices for payload protecting devices against environmental influences. Requirements for durability, operation, indication, maintenance, recycling
BS EN 15853:2010 Ambient air quality. Standard method for the determination of mercury deposition
BS EN 15900:2010 Energy efficiency services. Definitions and requirements
BS EN 60191-6-19:2010 Mechanical standardization of semiconductor devices. Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage
BS EN 62282-6-300:2009 Fuel cell technologies. Micro fuel cell power systems. Fuel cartridge interchangeability
BS EN 60695-1-10:2010 Fire hazard testing. Guidance for assessing the fire hazard of electrotechnical products. General guidelines
BS EN 3-10:2009 Portable fire extinguishers. Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm
http://www.findstandards.info

Quote: Hench2004@sina.com

Sell: BSI Standards Manufacturing, Processing & Goods 3 In the Cheapest

July 30th, 2009 | hench2004

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

BS ISO 8967:2005 BS ISO 8967:2005. Dried milk and dried milk products. Determination of bulk density
PAS78 : 2005 Audio format PAS78 : 2005 Audio format. PAS78 : 2005 (Audio Format) Guide to good practice in commissioning accessible websites
PAS78 : 2005 CD ROM Format PAS78 : 2005 CD ROM Format. PAS78 : 2005 (Disk Format) Guide to good practice in commissioning accessible websites
PAS78 : 2005 Large Print PAS78 : 2005 Large Print. PAS78 : 2005 (Large Print) Guide to good practice in commissioning accessible websites
PAS78 : 2005 Easyread Format PAS78 : 2005 Easyread Format. PAS78 : 2005 (Easyread format) Guide to good practice in commissioning accessible websites
ISO16732 : 2005 EDTN 1 ISO16732 : 2005 EDTN 1. ISO16732 : 2005 Fire safety engineering – Guidance on fire risk assessment
05/30139447 DC 05/30139447 DC. ISO 21601. Guidelines for assessing the significance of stress corrosion cracks detected in service
BS ISO/IEC 11694-6:2006 BS ISO/IEC 11694-6:2006. Identification cards. Optical memory cards. Linear recording method. Use of biometrics on an optical memory card
BS ISO/IEC 11694-5:2006 BS ISO/IEC 11694-5:2006. Identification cards. Optical memory cards. Linear recording method. Data format for information interchange for applications using ISO/IEC 11694-4, annex B
BS EN ISO 4491-3:2006 BS EN ISO 4491-3:2006. Metallic powders. Determination of oxygen content by reduction methods. Hydrogen-reducible oxygen
BS EN ISO 13944:2006 BS EN ISO 13944:2006. Lubricated metal-powder mixes. Determination of lubricant content. Modified Soxhlet extraction method
BS EN ISO 3738-2:2006 BS EN ISO 3738-2:2006. Hardmetals. Rockwell hardness test (scale A). Preparation and calibration of standard test blocks
BS EN ISO 291:2005 BS EN ISO 291:2005. Plastics. Standard atmospheres for conditioning and testing
BS ISO 12647-2:2004 BS ISO 12647-2:2004. Graphic technology. Process control for the production of half-tone colour separations, proof and production prints. Offset lithographic processes
05/30139275 DC 05/30139275 DC. EN 624 AMD 1. Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats
05/30139208 DC 05/30139208 DC. HD 361 S3 AMD 1. System for cable designation
06/30139194 DC 06/30139194 DC. ISO 8124-2. Safety of toys. Part 2. Flammability
06/30139190 DC 06/30139190 DC. ISO 8124-1 AMD 2. Safety of toys. Part 1. Safety aspects related to mechanical and physical properties
KIT 178 KIT 178. Conformity assessment kit no. 2
KIT 177 KIT 177. Conformity assessment kit
BS EN 4460:2005 BS EN 4460:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Installation and removal procedure
BS EN 4459:2005 BS EN 4459:2005. Aerospace series. Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel. Design standard
BS EN 4175:2005 BS EN 4175:2005. Aerospace series. Collars, flanged swage locking, sheartype, in titanium TI-P99002, metric series
BS EN 4458:2005 BS EN 4458:2005. Aerospace series. Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel.Strengt h class: 1100 MPa (at ambient temperature). Technicalspecification
BS EN ISO 16484-6:2005 BS EN ISO 16484-6:2005. Building automation and control systems (BACS). Data communication conformance testing
05/30138957 DC 05/30138957 DC. IEC 61300-2-34. Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 2-34. Tests. Resistance to solvents and contaminating fluids
BS EN 12101-1:2006 BS EN 12101-1:2006. Smoke and heat control systems. Specification for smoke barriers
BIP 2036:2006 BIP 2036:2006. The Risk Management Universe: a guided tour
06/30138864 DC 06/30138864 DC. ISO 18436-8. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 8. Thermography
06/30138861 DC 06/30138861 DC. ISO 18436-4. Condition monitoring and diagnostics of machines. Requirements for training and certification of personnel. Part 4. Industrial lubricant analysis
05/30138753 DC 05/30138753 DC. EN 71-1 AMD 1. Safety of toys. Part 1. Mechanical and physical properties
BS ISO 17356-3:2005 BS ISO 17356-3:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX operating system (OS)
PD CLC/TR 50448:2005 PD CLC/TR 50448:2005. Guide to levels of competence required in laser safety
BS ISO 17356-5:2006 BS ISO 17356-5:2006. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Network Management (NM)
BS ISO 17356-6:2006 BS ISO 17356-6:2006. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX implementation language (OIL)
BS ISO 17356-4:2005 BS ISO 17356-4:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX Communication (COM)
BS ISO 19013-1:2005 BS ISO 19013-1:2005. Rubber hoses and tubing for fuel circuits for internal combustionengines . Specification. Diesel fuels
PD ISO/TR 23602:2005 PD ISO/TR 23602:2005. Toughness of chain steels
WD/ISO/IEC22535 : 2006 EDTN2 WD/ISO/IEC22535 : 2006 EDTN2. ISO/IEC22535 : 2006 Information technology – Telecommunications and information exchange between systems – Corporate Telecommunication Networks – Tunnelling of QSIG over SIP
05/30138594 DC 05/30138594 DC. ISO/IEC 22535. Corporate Telecommunication Networks. Tunnelling of QSIG over SIP
BS 6007:2006 BS 6007:2006. Electric cables. Single core unsheathed heat resisting cables forvoltages up to and including 450/750 V, for internal wiring
ISO/IEC25437 : 2006 EDTN1 ISO/IEC25437 : 2006 EDTN1. ISO/IEC25437 : 2006 Information techonology – Telecommunications and information exchange between systems – WS-Session – Web Services for Application Session Services
05/30138572 DC 05/30138572 DC. IEC 61196-1-300. Coaxial communication cables. Mechanical test methods. Part 1-300. General requirements
PD CLC/TR 50469:2005 PD CLC/TR 50469:2005. Lightning protection systems. Symbols
ISO/IEC11179-2 : 2005 EDTN2 ISO/IEC11179-2 : 2005 EDTN2. ISO/IEC11179-2 : 2005 Information technology — Metadata registries (MDR). Part 2: Classification
05/30138432 DC 05/30138432 DC. BS EN 1501-1. Refuse collection vehicles. General requirements and safety reqirements. Part 1. Rear loaded refuse collection vehicles
05/30138425 DC 05/30138425 DC. ISO 4254-5. Agricultural machinery. Safety. Part 5. Power-driven soil-working equipment
CWA 15295:2005 CWA 15295:2005. Description of references and data models for classification
CWA 15374:2005 CWA 15374:2005. Security management system for suppliers to the secure printing industry
CWA 15375:2005 CWA 15375:2005. Separators for marine residual fuel. Performance testing using specific test oil.
06/30138405 DC 06/30138405 DC. ISO 8539. Forged steel components for lifting slings. Grade 8
05/30138385 DC 05/30138385 DC. EN 50440. Efficiency of domestic electrical storage water-heaters
BS EN 60335-2-29:2004 BS EN 60335-2-29:2004. Specification for safety of household and similar electrical appliances. Particular requirements. Particular requirements for battery chargers
06/30138366 DC 06/30138366 DC. ISO 9241-20. Ergonomics of human-system interaction. Part 20. Accessibility guidelines for information/communication technology (ICT) equipment and services
05/30138350 DC 05/30138350 DC. EN 15322. Bitumen and bituminous binders. Framework for specifying cutback and fluxed bituminous binders
BS 5261C:2005 (Pack of 100 laminated) BS 5261C:2005 (Pack of 100 laminated).
BS5261C : 2005 (Pack of 50) BS5261C : 2005 (Pack of 50).
BS5261C : 2005 (Pack of 20) BS5261C : 2005 (Pack of 20).
BS5261C : 2005 (Pack of 10) BS5261C : 2005 (Pack of 10).
05/30138231 DC 05/30138231 DC. ISO 8407. Corrosion of metals and alloys. Removal of corrosion products from corrosion test specimens
PAS 75:2005 PAS 75:2005. Specification for the service and provision of printing services
ISO/IECTR24746 : 2005 EDTN 1 ISO/IECTR24746 : 2005 EDTN 1. ISO/IECTR24746 : 2005 Information technology. Generic cabling for customer premises Mid-Span DTE Power insertion.
BS ISO 18164:2005 BS ISO 18164:2005. Passenger car, truck, bus and motorcycle tyres. Methods of measuring rolling resistance
05/30137984 DC 05/30137984 DC. EN 15273-3. Railway applications. Gauges. Part 3. Structure gauges
05/30137981 DC 05/30137981 DC. EN 15273-2. Railway applications. Gauges. Part 2. Rolling stock gauges
05/30137978 DC 05/30137978 DC. EN 15273-1. Railway applications. Gauges. Part 1. Generalities. Common rules for infrastructure and rolling stock
PAS 80:2005 PAS 80:2005. Automotive garage services – Service and repair of vehicles – Technical and customer service – Specification
PAS 81:2005 PAS 81:2005. Specification for the management and operation of swimming pools
BS EN 2002-1:2005 BS EN 2002-1:2005. Aerospace series. Metallic materials. Test methods. Tensile testing at ambient temperature
05/30137949 DC 05/30137949 DC. EN 15269-3. Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and shutters. Part 3. Timber hinged and pivoted doorsets
05/30137946 DC 05/30137946 DC. EN 15269-1. Extended application of test results for fire resistance for doorsets and shutter assemblies. For doors and windows. Part 1. General requirements for fire resistance
05/30137922 DC 05/30137922 DC. ISO 13865-3. Safety of machinery. Pressure-sensitive protective devices. Part 3. General principles for the design and testing of pressure-sensitive bumpers, plates, wires and similar devices
ISO13602-2 : 2006 EDTN 1 (R08) ISO13602-2 : 2006 EDTN 1 (R08). ISO13602-2 : 2006 Technical energy systems – Methods for analysis. Part 2: Weighting and aggregation and of energywares
05/30137738 DC 05/30137738 DC. ISO 9523. Touring ski-boots for adults. Interface with touring ski-bindings. Requirements and test methods
05/30137732 DC 05/30137732 DC. ISO 11088 AMD 1. Assembly, adjustment and inspection of an alpine ski-binding-boot (S-B-B) system
06/30137711 DC 06/30137711 DC. EN 13618-2. Water supply. Hose assemblies. Part 2. Semi rigid assemblies with or without braiding
06/30137708 DC 06/30137708 DC. EN 13618-1. Water supply. Hose assemblies. Part 1. Flexible hose assemblies with or without braiding
BIP 0081:2005 BIP 0081:2005. ITSMF. Application management pocketbook
BIP 0083:2005 BIP 0083:2005. ITSMF. ICT infrastructure management pocketbook
BIP 3044:2005 BIP 3044:2005. BS 8300 Design of buildings and their approaches to meet the needs of disabled people. Code of practice CD-ROM
BS EN 14453:2005 BS EN 14453:2005. Devices to prevent pollution by backflow of potable water. Pipe interrupter with permanent atmospheric vent DN 10 to DN 20. Family D, type C
PD CEN/TR 15128:2005 PD CEN/TR 15128:2005. Survey of European standards for rehabilitation of drain and sewer systems
BS EN 14870-3:2006 BS EN 14870-3:2006. Petroleum and natural gas industries. Induction bends, fittings and flanges for pipeline transportation systems. Flanges
PD CLC/TR 62102:2006 PD CLC/TR 62102:2006. Electrical safety. Classification of interfaces for equipment to be connected to information and communications technology networks
BS ISO 11357-4:2005 BS ISO 11357-4:2005. Plastics. Differential scanning calorimetry (DSC). Determination of specific heat capacity
BS ISO 22718:2006 BS ISO 22718:2006. Cosmetics. Microbiology. Detection of Staphylococcus aureus
BS ISO 22717:2006 BS ISO 22717:2006. Cosmetics. Microbiology. Detection of Pseudomonas aeruginosa
BS ISO 22715:2006 BS ISO 22715:2006. Cosmetics. Packaging and labelling
BS ISO 21150:2006 BS ISO 21150:2006. Cosmetics. Microbiology. Detection of Escherichia coli
BS ISO 21149:2006 BS ISO 21149:2006. Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria
BS ISO 21148:2005 BS ISO 21148:2005. Cosmetics. Microbiology. General instructions for microbiological examimation
BS EN 3475-414:2005 BS EN 3475-414:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Differential scanning calorimeter (DSC test)
BS ISO 8262-3:2005 BS ISO 8262-3:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (Reference method). Special cases
BS EN ISO 20345:2004 BS EN ISO 20345:2004. Personal protective equipment. Safety footwear
BS EN ISO 7998:2005 BS EN ISO 7998:2005. Ophthalmic optics. Spectacle frames. Lists of equivalent terms and vocabulary
BS EN 2714-013:2005 BS EN 2714-013:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. DR family, screened (spiral) and jacketed, UV laser printable. Product standard
BS EN ISO 17249:2004 BS EN ISO 17249:2004. Safety footwear with resistance to chain saw cutting
BS EN 13141-5:2004 BS EN 13141-5:2004. Ventilation for buildings. Performance testing of components/products for residential ventilation. Cowls and roof outlet terminal devices
05/30137514 DC 05/30137514 DC. IEC 60747-14-4. Discrete semiconductor devices. Part 14-4. Semiconductor accelerometers
BS EN 12666-1:2005 BS EN 12666-1:2005. Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE). Specifications for pipes, fittings and the system
BS EN ISO 6134:2005 BS EN ISO 6134:2005. Rubber hoses and hose assemblies for saturated steam. Specification
BS EN 1146:2005 BS EN 1146:2005. Respiratory protective devices. Selfcontained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
ISO/TS9941 : 2005 EDTN2 ISO/TS9941 : 2005 EDTN2. ISO/TS9941 : 2005 Milk and canned evaporated milk – Determination of tin contant – Spectrometric method
BS EN 2607:2005 BS EN 2607:2005. Aerospace series. O-rings for adaptors, threaded, with lockring. Survey
BS ISO 22644:2006 BS ISO 22644:2006. Space data and information transfer systems. Orbit data messages
BS ISO 22672:2006 BS ISO 22672:2006. Space data and information transfer systems. Space link extension (SLE). Forward space packet service
DD CEN/TS 15297:2006 DD CEN/TS 15297:2006. Solid biofuels. Determination of minor elements
DD CEN/TS 15296:2006 DD CEN/TS 15296:2006. Solid biofuels. Calculation of analyses to different bases
DD CEN/TS 15290:2006 DD CEN/TS 15290:2006. Solid biofuels. Determination of major elements
DD CEN/TS 15289:2006 DD CEN/TS 15289:2006. Solid biofuels. Determination of total content of sulphur and chlorine
BS 8408:2005 BS 8408:2005. Road traffic signs. Testing and performance of microprismatic retroreflective sheeting materials. Specification
BS EN 4176:2005 BS EN 4176:2005. Aerospace series. Lockbolts, 100° countersunk normal head or protruding head, tension-/ sheartype, close tolerance, in titanium alloy TI-P64001, anodized or with aluminium pigmented coating. Collars in titanium TI-P99002 or aluminium alloy 2024. Metric series. Technical specification
BS EN 4591:2005 BS EN 4591:2005. Aerospace series. Nuts, barrel, self-locking, floating, self-aligning,in heat resisting nickel base alloy, MoS2 lubricated. Classification: 15 50 MPa (at ambient temperature) / 315°C
BS EN 4303:2005 BS EN 4303:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4304:2005 BS EN 4304:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,25 mm wall thickness)
BS EN 4306:2005 BS EN 4306:2005. Aerospace series. Sleeves, tubular, for tension screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4307:2005 BS EN 4307:2005. Aerospace series. Sleeves, tubular, for shear screws with flush head, in corrosion resisting steel, passivated, (0,50 mm wall thickness)
BS EN 4497:2005 BS EN 4497:2005. Aerospace series. Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating. Classification: 1 100 MPa (at ambient temperature) / 315 °C
BS EN 4498:2005 BS EN 4498:2005. Aerospace series. Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating. Classification: 1 550 MPa (at ambient temperature) / 315 °C
BS EN 4590:2005 BS EN 4590:2005. Aerospace series. Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated
BS EN 60127-4:2005+A1:2009 BS EN 60127-4:2005+A1:2009. Miniature fuses. Universal modular fuse-links (UMF). Through-hole and surface mount types
ISO/IECTR15440 : 2005 EDTN1 ISO/IECTR15440 : 2005 EDTN1. ISO/IECTR15440 : 2005 Information technology – Future keyboards and other associated input devices and related entry methods
BS EN 2337:2006 BS EN 2337:2006. Aerospace series. Spherical plain bearings. Technical specification
BS EN 2336:2005 BS EN 2336:2005. Aerospace series. Bearings, spherical plain in steel with assembly slots. Dimensions and loads
BS EN 2328:2006 BS EN 2328:2006. Aerospace series. Washers, tab in corrosion resisting steel, cadmium plated for flight control rods. Dimensions
05/30137050 DC 05/30137050 DC. EN 15313. Railway applications. Wheelsets and bogies. Wheelset maintenance
DD CEN/TS 15279:2006 DD CEN/TS 15279:2006. Workplace exposure. Measurement of dermal exposure. Principles and methods
BS EN 14343:2005 BS EN 14343:2005. Rotary positive displacement pumps. Performance tests for acceptance
BIP 2079:2005 BIP 2079:2005. ISO 22000. Food safety management pack (due for publication November 2005)
BS EN 3745-202:2005 BS EN 3745-202:2005. Aerospace series. Fibres and cables, optical, aircraft use. Test methods. Fibre dimensions
BS EN 2853:2005 BS EN 2853:2005. Current ratings for electrical cables with conductor EN 2083
06/30136833 DC 06/30136833 DC. ISO 21100. Air cargo unit load devices. Performance requirements and test parameters
BS EN 2591-609:2005 BS EN 2591-609:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Optical elements. Effectiveness of cable attachment. Cable cyclic flexing
BS EN 2591-212:2005 BS EN 2591-212:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Surface transfer impedance
BS EN 2591-214:2005 BS EN 2591-214:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Lightning strike, current and voltage pulse
BS EN 2591-220:2005 BS EN 2591-220:2005. Aerospace series. Elements of electrical and optical connection. Test methods. Contact/conductor joint ageing by current and temperature cycling
05/30136816 DC 05/30136816 DC. IEC 60191-2/F62 ED 1. Proposed new package outline, power package with 17 pins
05/30136813 DC 05/30136813 DC. IEC 60191-2/F63 ED 1. Proposed new package outline, power package with 34 pins
BS EN 2267-010:2005 BS EN 2267-010:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DR family, single UV laser printable. Product standard
BS EN 2267-009:2005 BS EN 2267-009:2005. Aerospace series. Cables, electrical for general purpose. Operating temperatures between -55°C and 260°C. DRA family, single and multicore assembly. Product standard
05/30136673 DC 05/30136673 DC. IEC 61000-6-4 ED 2. Electromagnetic compatibility (EMC). Part 6-4. Generic standards. Emission standard for industrial environments
05/30136667 DC 05/30136667 DC. IEC 61000-6-3 ED 2. Electromagnetic compatibility (EMC). Part 6-3. Generic standards. Emission standard for residential, commercial and light-industrial environments
05/30136650 DC 05/30136650 DC. IEC 60127-2 AMD 2. Miniature fuses. Part 2. Cartridge fuse-links
DD IEC/PAS 62267:2005 DD IEC/PAS 62267:2005. Railway applications. Automated urban guided transport (AUGT). Safety requirements
ISO22242 : 2005 EDTN 1 ISO22242 : 2005 EDTN 1. ISO22242 : 2005 Road construction and road maintenance machinery and equipment. Basic types. Identification and description
05/30136556 DC 05/30136556 DC. prEN 14313. Thermal insulation products for building equipment and industrial installation. Factory made polyethylene foam (PEF) products. Specification
05/30136552 DC 05/30136552 DC. prEN 14304. Thermal insulation products for building equipment and industrial installations. Factory made flexible elastomeric foam (FEF). Specification
05/30136550 DC 05/30136550 DC. prEN 14314. Thermal insulation products for building equipment and industrial installations. Factory made phenolic foam (PF) products. Specification
05/30136538 DC 05/30136538 DC. prEN 14307. Thermal insulation products for building equipment and industrial installations. Factory made extruded polystyrene foam (XPS) products. Specification
05/30136516 DC 05/30136516 DC. prEN 14308. Thermal insulation products for building equipment and industrial installations. Factory made rigid polyurethane foam (PUR) and polyisocyanurate foam (PIR) products. Specification
05/30136503 DC 05/30136503 DC. prEN 14309. Thermal insulation products for building equipment and industrial installations. Factory made products of expanded polystyrene (EPS). Specification
05/30136482 DC 05/30136482 DC. EN 12983-3. Cookware. Domestic cookware for use on top of a stove, cooker or hob. Part 3. Cookware for use on induction heating sources
PD ISO/TR 7620:2005 PD ISO/TR 7620:2005. Rubber materials. Chemical resistance
PD CEN/TR 14709:2006 PD CEN/TR 14709:2006. Postal services. Quality of service. Guide for the implementation of EN 13850
DD CEN/TS13381-1:2005 DD CEN/TS13381-1:2005. Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS ISO 16038:2005 BS ISO 16038:2005. Rubber condoms. Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms
BS EN 12984:2005 BS EN 12984:2005. Food processing machinery. Portable and/or hand-guided machines and appliances with mechanically driven cutting tools. Safety and hygiene requirements
BS ISO 1817:2005 BS ISO 1817:2005. Rubber, vulcanized. Determination of the effect of liquids
05/30136363 DC 05/30136363 DC. IEC 60255-6 ED 3. Electrical relays. Part 6. General requirements for measuring relays and protection equipment
BS EN 581-1:2006 BS EN 581-1:2006. Outdoor furniture. Seating and tables for camping, domestic and contract use. General safety requirements
05/30136348 DC 05/30136348 DC. BS 1339-2. Humidity. Part 2. Humidity calculation and tables
05/30136307 DC 05/30136307 DC. ISO 1496-1 AMD 5. Freight containers. Specification and testing. Part 1. General cargo containers for general purposes
BS ISO 11157:2005 BS ISO 11157:2005. Road vehicles. Brake lining assemblies. Inertia dynamometer test method
CWA 14729-3:2005 CWA 14729-3:2005. The Intrastat system. Message implementation guideline of INSRES/XML
CWA 14729-2:2005 CWA 14729-2:2005. The Intrastat system. Message implementation guideline of INSTAT/XML
CWA 14729-1:2005 CWA 14729-1:2005. The Intrastat system. The implementation model
06/30136266 DC 06/30136266 DC. ISO 21138-3. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 3.Pipes with a non-smooth external surface (all materials), type B
06/30136263 DC 06/30136263 DC. ISO 21138-2. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 2.Pipes and fittings with smooth external surface. Type A
06/30136260 DC 06/30136260 DC. ISO 21138-1. Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinylchloride) (PVC-U), polypropylene (PP) and polyethylene (PE). Part 1.Material and performance specifications for pipes, fittings and the systems
BS EN 2084:2005 BS EN 2084:2005. Aerospace series. Cables, electric, single-core, general purpose, with conductors in copper or copper alloy. Technical specification
BS ISO 132:2005 BS ISO 132:2005. Rubber, vulcanized or thermoplastic. Determination of flex cracking and crack growth (De Mattia)
DD CEN/TS 15280:2006 DD CEN/TS 15280:2006. Evaluation of a.c. corrosion likelihood of buried pipelines. Application to cathodically protected pipelines
DD CLC/TS 61970-2:2005 DD CLC/TS 61970-2:2005. Energy management system application program interface (EMS-API). Glossary
05/30136183 DC 05/30136183 DC. IEC 60404-8-7. Magnetic materials. Part 8-7. Specification of individual materials. Cold-rolled grain-oriented electrical steel sheet and strip delivered in the fully-processed state
BS EN 10294-1:2005 BS EN 10294-1:2005. Hollow bars for machining. Technical delivery conditions. Non alloy and alloy steels
05/30136149 DC 05/30136149 DC. IEC 62116. Testing procedure of islanding prevention measures for utility interactive photovoltaic inverters
05/30136140 DC 05/30136140 DC. IEC 60095-4 ED 2. Lead-acid starter batteries. Part 4. Dimensions of batteries for heavy vehicles
05/30136105 DC 05/30136105 DC. ISO 15042. Multiple split-system air-conditioners and air-to-air heat pumps. Testing and rating for performance
ISO6597 : 2005 EDTN4 ISO6597 : 2005 EDTN4. ISO6597 : 2005 Road vehicles – Hydraulic braking systems, including those with electronic control functions, for motor vehicles – Test procedures
05/30136084 DC 05/30136084 DC. ISO 12575-3. Thermal insulation. Exterior insulating systems for foundations. Part 3. Test methods
05/30136071 DC 05/30136071 DC. ISO 13253. Ducted air-conditioners and air-to-air heat pumps. Testing and rating for performance
PD IEC/TR 62240:2005 PD IEC/TR 62240:2005. Process management for avionics. Use of semiconductor devices outside manufacturers’ specified temperature range
BS ISO 14827-2:2005 BS ISO 14827-2:2005. Transport information and control systems. Data interfaces between centres for transport information and control systems. DATEX-ASN
PD CEN/TR 14819-2:2005 PD CEN/TR 14819-2:2005. Safety recommendations for cableway installations designed to carry persons. Prevention and fight against fire. Other funicular railways and other installations
BS EN ISO 8340:2005 BS EN ISO 8340:2005. Building construction. Sealants. Determination of tensile properties at maintained extension
BS EN ISO 8339:2005 BS EN ISO 8339:2005. Building construction. Sealants. Determination of tensile properties (extension to break)
BS ISO 14827-1:2005 BS ISO 14827-1:2005. Transport information and control systems. Data interfaces between centres for transport information and control systems. Message definition requirements
ISO/IECTR15938-11 : 2005 EDTN1 ISO/IECTR15938-11 : 2005 EDTN1. ISO/IECTR15938-11 : 2005 Information technology – Multimedia content description interface – Part 11: MPEG-7 profile schemas
BS EN 4616:2005 BS EN 4616:2005. Aerospace series. Magnesium alloy MG-C18002. T4. Chill casting
DD ISO/PAS 22241-2:2005 DD ISO/PAS 22241-2:2005. Diesel engines. NOx reduction agent AUS 32. Test methods
BS EN 4615:2005 BS EN 4615:2005. Aerospace series. Magnesium alloy MG-C18002. T4. Sand casting
BIP 3041:2005 BIP 3041:2005. Recommended DDA hardware for BIP 3040
DD ISO/PAS 22241-1:2005 DD ISO/PAS 22241-1:2005. Diesel engines. NOx reduction agent AUS 32. Quality requirements
BIP 2100:2005 BIP 2100:2005. ISO 9001:2000 for small businesses. 3rd edition
BIP 2099:2005 BIP 2099:2005. ISO 9001:2000 in brief. 2nd edition
BS EN ISO 5943:2006 (EDTN 1) BS EN ISO 5943:2006 (EDTN 1). Cheese and processed cheese products. Determination of chloride content. Potentiometric titration method
BS ISO 8156:2005 BS ISO 8156:2005. Dried milk and dried milk products. Determination of insolubility index
PD CEN/TR 15253:2005 PD CEN/TR 15253:2005. Health informatics. Quality of service requirements for health information interchange
BS ISO 15113:2005 BS ISO 15113:2005. Rubber. Determination of frictional properties
05/30135559 DC 05/30135559 DC. EN 50471. Electromagnetic compatibility (EMC). Product family emission standard for wire-line telecommunication networks
ISO93-2 : 2006 EDTN3 ISO93-2 : 2006 EDTN3. ISO 93-2 Textile machinery and accessories – Cylindrical sliver cans. Part 2: Spring bottoms
ISO93-1 : 2006 EDTN4 ISO93-1 : 2006 EDTN4. ISO93-1 : 2006 Textile machinery and accessories – Cylindrical sliver cans. Part 1: Main dimensions
BIP 2088:2005 BIP 2088:2005. Escalators and moving walks. Code of practice for safe working on escalators and moving walks
BS EN 521:2006 BS EN 521:2006. Specifications for dedicated liquefied petroleum gas appliances. Portable vapour pressure liquefied petroleum gas appliances
05/30135474 DC 05/30135474 DC. BS 600. A guide to the application of statistical methods to quality and standardization
06/30135440 DC 06/30135440 DC. ISO 21072-1. Ships and marine technology. Marine environment protection. Performance testing of oil skimmers. Part 1. Moving water condition
05/30135332 DC 05/30135332 DC. BS 6102-3 AMD 4. Cycles. Part 3. Specification for photometric and physical requirements of lighting equipment
BS EN ISO 6270-2:2005, BS 3900-F21:2005 BS EN ISO 6270-2:2005, BS 3900-F21:2005. Paints and varnishes. Determination of resistance to humidity. Procedure for exposing test specimens in condensation-water atmospheres
BIP 0018:2005 BIP 0018:2005. Simplifying the implementation of MPEG CD-ROM
WD/ISO/IEC17344 : 2005 EDTN2 WD/ISO/IEC17344 : 2005 EDTN2. ISO/IEC17344 : 2005 Information technology — Data interchange on 120 mm and 80 mm using +R format — Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)
05/30135285 DC 05/30135285 DC. HD 22.3 S4/prAA. Cables of rated voltages up to and including 450/750 V and having cross-linked insulation. Part 3. Heat resistant silicone rubber insulated cables
KIT 176 KIT 176. BS EN 13001. Crane safety design kit
BS EN 14529:2005 BS EN 14529:2005. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask designed to include a positive pressure lung governed demand valve for escape purposes only
05/30135225 DC 05/30135225 DC. IEC 60749-9 ED 2. Semiconductor devices. Discrete devices. Part 9. Insulated-gate bipolar transistors (IGBTs)
BS EN 2714-002:2005 BS EN 2714-002:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened and jacketed. General
BS EN 3475-705:2005 BS EN 3475-705:2005. Aerospace series. Cable, electrical, aircraft use. Test methods. Contrast measurement
BS EN 3475-407:2005 BS EN 3475-407:2005. Aerospace series. Cable, electrical, aircraft use. Test methods. Flammability
05/30135208 DC 05/30135208 DC. ISO 20712-1. Water safety signs and beach safety flags. Part 1. Specifications for water safety signs used in workplaces and public areas
BS EN 3475-706:2005 BS EN 3475-706:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Laser markability
BS EN 1034-5:2005 BS EN 1034-5:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Sheeters
AD2000M S3/2 : 2004 AD2000M S3/2 : 2004.
AD2000M N1 : 2004 AD2000M N1 : 2004. Pressure vessels in glass fibre reinforced thermosetting plastics
AD2000M W9 : 2004 AD2000M W9 : 2004. ADM W9 : 2004 Steel flanges
AD2000M W13 : 2004 AD2000M W13 : 2004.
PD ISO/TR 16142:2006 PD ISO/TR 16142:2006. Medical devices. Guidance on the selection of standards in support of recognized essential principles of safety and performance of medical devices
AD2000M G1 : 2004 AD2000M G1 : 2004. ADM G1 : 2004 Structure, Application and Method Guidelines
BS EN 3475-411:2005 BS EN 3475-411:2005. Aerospace series. Cables, electrical, aircraft use. Test methods. Resistance to fluids
BS EN 2714-003:2005 BS EN 2714-003:2005. Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55°C and 260°C. Screened (spiral) and jacketed, ink jet printable. Product standard
BS ISO 15928-2:2005 BS ISO 15928-2:2005. Houses. Description of performance. Structural serviceability
BS ISO 3899:2005 BS ISO 3899:2005. Rubber. Nitrile latex. Determination of residual acrylonitrile content
BS EN 13321-1:2006 BS EN 13321-1:2006. Open data communication in building automation, controls and building management. Home and building electronic system. Product and system requirements
FDIS 27001:2005, BS 7799-2:2005 (Draft) FDIS 27001:2005, BS 7799-2:2005 (Draft). Draft BS 7799-2:2005 (ISO/IEC FDIS 27001:2005). Information technology. Security techniques. Information security management systems. Requirements (See Item Summary for details of Special Offer)
DD ISO/TS 16553:2006 DD ISO/TS 16553:2006. Road vehicles. Data cables. Test methods and requirements
05/30135076 DC 05/30135076 DC. IEC 60730-1 A5 ED 4. Automatic eletrical controls for household and similar use. Part 1. General requirements. Amendment to incorporate EMC levels from the IEC 60335 series of standards
05/30135066 DC 05/30135066 DC. IEC 60730-1 AMD 4. ED 4. Automatic electrical controls for household and similar use. Part 1. General requirements. Amendment to to incorporates EMC levels from IEC 60335-1 A1 ED 4
05/30135062 DC 05/30135062 DC. IEC 60730-1 AMD 3. ED 4. Automatic electrical controls for household and similar use. Part 1. General requirements. Amendment to update clauses 9, 10, and 20
05/30135055 DC 05/30135055 DC. IEC 60730-1 AMD 2. ED 4. Automatic electrical controls for household and similar use. Part 1. General requirements. Amendment to update Annex N
05/30135042 DC 05/30135042 DC. ISO/DIS 17512-1. Soil quality. Avoidance test for testing the quality of soils and effects of chemicals on behaviour. Part 1. Test with earthworms (Eisenia fetida and Eisenia andrei)
ISO23551-4 : 2005 EDTN 1 ISO23551-4 : 2005 EDTN 1. ISO23551-4 : 2005 Safety and control devices for gas burners and gas-burning appiances. Particular requirements. Part 4: Valve-proving systems for automatic shut-off valves
PD CEN/TR 15118:2005 PD CEN/TR 15118:2005. Testing guidelines for touch and close fasteners
DD CLC/TS 61643-22:2006 DD CLC/TS 61643-22:2006. Low-voltage surge protective devices. Surge protective devices connected to telecommunications and signalling networks. Selection and application principles
BS ISO 289-1:2005 BS ISO 289-1:2005. Rubber, unvulcanized. Determinations using a shearing-disc viscometer. Determination of Mooney viscosity
05/30134891 DC 05/30134891 DC. EN 15254-2. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 2. Masonry and gypsum blocks
BS ISO 9349:2004 BS ISO 9349:2004. Preinsulated ductile iron pipeline systems
BS EN 12336:2005 BS EN 12336:2005. Tunnelling machines. Shield machines, thrust boring machines, auger boring machines, lining erection equipment. Safety requirements
05/30134824 DC 05/30134824 DC. EN 50447. Active implantable medical devices. Particular requirements for Heart-Lung Machines (HLM)
05/30134817 DC 05/30134817 DC. IEC 62434 TR. The pH measurements in difficult media. Definitions, standards and procedures
05/30134815 DC 05/30134815 DC. IEC 62432 TR. The rH index in aqueous and aqueous-organic media
05/30134748 DC 05/30134748 DC. ISO 14521. Gears. Calculation of load capacity of wormgears
06/30134713 DC 06/30134713 DC. ISO 14855-2. Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions. Method by analysis of evolved carbon dioxide. Part 2. Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
BS ISO 13232-1:2005 BS ISO 13232-1:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definitions, symbols and general considerations
BS ISO 13232-2:2005 BS ISO 13232-2:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Definition of impact conditions in relation to accident data
BS ISO 13232-3:2005 BS ISO 13232-3:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Motorcyclist anthropometric impact dummy
BS ISO 13232-4:2005 BS ISO 13232-4:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Variables to be measured, instrumentation and measurement procedures
BS ISO 13232-5:2005 BS ISO 13232-5:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Injury indices and risk/benefit analysis
BS ISO 13232-6:2005 BS ISO 13232-6:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Full-scale impact-test procedures
BS ISO 13232-7:2005 BS ISO 13232-7:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Standardized procedures for performing computer simulations of motorcycle impact tests
BS ISO 13232-8:2005 BS ISO 13232-8:2005. Motorcycles. Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles. Documentation and reports
BIP 2073:2005 BIP 2073:2005. Quality patient care in hospitals
BIP 2072:2005 BIP 2072:2005. Quality of care in residential homes for the elderly
BIP 2071:2005 BIP 2071:2005. Medical devices: ISO 13485 and ISO 9001
06/30134641 DC 06/30134641 DC. ISO 19252. Plastics. Determination of scratch properties
06/30134637 DC 06/30134637 DC. ISO 22007-3. Plastics. Determination of thermal conductivity and diffusivity. Part 3. Temperature wave analysis method
DD IEC/PAS 62431:2005 DD IEC/PAS 62431:2005. Measurement methods for reflectivity of electromagnetic wave absorbers in millimetre wave frequency
05/30134607 DC 05/30134607 DC. ISO 22110. Milk and milk products. Sampling. Inspection by variables in the presence of measurement error
BS ISO 8262-2:2005 BS ISO 8262-2:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method). Edible ices and ice-mixes
BS ISO 8262-1:2005 BS ISO 8262-1:2005. Milk products and milk-based foods. Determination of fat content by the Weibull-Berntrop gravimetric method (reference method). Infant foods
PD ISO/TR 15155:2005 PD ISO/TR 15155:2005. Test facilities for agricultural irrigation equipment
BS ISO 6730:2005 BS ISO 6730:2005. Milk. Enumeration of colony-forming units of psychrotrophic microorganisms. Colony-count technique at 6,5°C
05/30134586 DC 05/30134586 DC. IEC 60050-426. International Electrotechnical Vocabulary. Chapter 426. Electrical apparatus for explosive atmospheres
05/30134544 DC 05/30134544 DC. EN 23698. Chemical analysis of nitride bonded silicon carbide refractories
BS ISO 23273-1:2006 BS ISO 23273-1:2006. Fuel cell road vehicles. Safety specifications. Vehicle functional safety
BS EN 62317-7:2005 BS EN 62317-7:2005. Ferrite cores. Dimensions. EER-cores
CWA 15292:2005 CWA 15292:2005. Standard form contract to assist compliance with obligations imposed by article 17 of the Data Protection Directive 95/46/EC (and implementation guide)
CWA 15294:2005 CWA 15294:2005. Dictionary of terminology for product classification and description
CWA 15293:2005 CWA 15293:2005. Automotive fuels. Ethanol E85. Requirements and test methods
BS EN 12951:2004 BS EN 12951:2004. Prefabricated accessories for roofing. Permanently fixed roof ladders. Product specification and test methods
DD CEN/TS 15210-2:2005 DD CEN/TS 15210-2:2005. Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes. Briquettes
DD CEN/TS 15210-1:2005 DD CEN/TS 15210-1:2005. Solid biofuels. Method for the determination of mechanical durability of pellets and briquettes. Pellets
BS ISO 15837:2004 BS ISO 15837:2004. Ships and marine technology. Gasketed mechanical couplings for use in piping systems. Performance specification
BS ISO 3384:2005 BS ISO 3384:2005. Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
05/30134362 DC 05/30134362 DC. EN 15101-2. Thermal insulation products for buildings. In-situ formed loose-fill cellulose products. Part 2. Specification for the installed products
05/30134359 DC 05/30134359 DC. EN 15101-1. Thermal insulation products for buildings. In-situ formed loose-fill cellulose products. Part 1. Specification for the products before installation
05/30134315 DC 05/30134315 DC. ISO 22967. Automatic forced draught burners for gaseous fuels
05/30134294 DC 05/30134294 DC. BS 8445. Bath and shower mats. Specification
BS EN 516:2006 BS EN 516:2006. Prefabricated accessories for roofing. Installations for roof access. Walkways, treads and steps
BS 8766:2004 BS 8766:2004. Names and identifiers of individuals and groups. Data structure for interoperability. Specification
BS EN 60228:2005 BS EN 60228:2005. Conductors of insulated cables
BS EN 13367:2005 BS EN 13367:2005. Ceramic machines. Safety. Transfer platforms and cars
BS ISO 8705:2005 BS ISO 8705:2005. Mopeds. Measurement methods for location of centre of gravity
05/30134101 DC 05/30134101 DC. EN 15228. Structural timber. Structural timber preservative treated against biological attack
BS EN 1034-4:2005 BS EN 1034-4:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Pulpers and their loading facilities
KIT 175 KIT 175. Lifts and escalators safety kit
BS ISO 17356-2:2005 BS ISO 17356-2:2005. Road vehicles. Open interface for embedded automotive applications. OSEK/VDX specifications for binding OS, COM and NM
05/30134015 DC 05/30134015 DC. EN 15254-5. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 5. Metal sandwich panel construction
05/30134009 DC 05/30134009 DC. EN 15254-1. Extended application of results from fire resistance tests. Non-loadbearing walls. Part 1. General
PD 970:2005 PD 970:2005. Wrought steels for mechanical and allied engineering purposes. Requirements for carbon, carbon manganese and alloy hot worked or cold finished steels
BS 8459:2005 BS 8459:2005. Determination of extractable matter in textiles. Method
PD CEN/TR 15230:2005 PD CEN/TR 15230:2005. Workplace atmospheres. Guidance for sampling of inhalable, thoracic and respirable aerosol fractions
BIP 2095:2005 BIP 2095:2005. Setting the tone. Ethical business leadership
BIP 2092:2005 BIP 2092:2005. Corporate use of codes of ethics: 2004 survey
BIP 2091:2005 BIP 2091:2005. Risky business. Towards best practice in managing reputation risk
BS ISO 23539:2005 BS ISO 23539:2005. Photometry. The CIE system of physical photometry
BIP 2090:2005 BIP 2090:2005. Understanding and managing risk attitude
BIP 2087:2005 BIP 2087:2005. SMMT kit. Guides for business improvement
BS 8621:2004 BS 8621:2004. Thief resistant lock assembly. Keyless egress
BS 3621:2004 BS 3621:2004. Thief resistant lock assembly. Key egress
06/30133753 DC 06/30133753 DC. ISO 24473. Fire tests. Open calorimetry. Measurement of the rate of production of heat and combustion products for fires of up to 20MW
BS 9990:2006 BS 9990:2006. Code of practice for non-automatic fire-fighting systems in buildings
BS EN 237:2004, BS 2000-428:2004 BS EN 237:2004, BS 2000-428:2004. Methods of test for petroleum and its products. BS 2000-428: Liquid petroleum products. Petrol. Determination of low lead concentrations by atomic absorption spectrometry
BS EN 62137:2004 BS EN 62137:2004. Environmental and endurance testing. Test methods for surface-mount boards of area array type packages FBGA, BGA, FLGA, LGA, SON and QFN
BS ISO 22663:2006 BS ISO 22663:2006. Space data and information transfer systems. Proximity-1 space link protocol. Data link layer
BS ISO 21848:2005 BS ISO 21848:2005. Road vehicles. Electrical and electronic equipment for a supply voltage of 42 V. Electrical loads
BS 7593:2006 BS 7593:2006. Code of practice for treatment of water in domestic hot water central heating systems
ISO10426-1 : 2005 EDTN2 ISO10426-1 : 2005 EDTN2. ISO10426-1 : 2005 Petroleum and natural gas industries – Cements and materials for well cementing. Part 1: Specification
05/30133483 DC 05/30133483 DC. ISO 18213-6. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 6. Accurate in-tank determination of liquid density in accountancy vessels equipped with dip tubes
05/30133480 DC 05/30133480 DC. ISO 18213-5. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 5. Accurate determination using a rapid bubbling rate of liquid height in accountancy tanks equipped with dip tubes
05/30133477 DC 05/30133477 DC. ISO 18213-4. Nuclear fuel technology. Tank calibration and volume determination for nuclear materials accountancy. Part 4. Accurate determination using a slow bubbling rate of liquid height in accountancy tanks equipped with dip tubes
DD CEN/TS 15291:2006 DD CEN/TS 15291:2006. Identification card system. Guidance on design for accessible card-activated devices
BS EN 50310:2006 BS EN 50310:2006. Application of equipotential bonding and earthing in buildings with information technology equipment
BS EN 1034-14:2005 BS EN 1034-14:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Reel splitter
BS EN 1034-13:2005 BS EN 1034-13:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Machines for de-wiring bales and units
BS EN 1034-6:2005 BS EN 1034-6:2005. Safety of machinery. Safety requirements for the design and construction of paper making and finishing machines. Calender
05/30133366 DC 05/30133366 DC. EN 5XXXX BTTF 116-1. Standard for the inventory, control, management, decontamination and/or disposal of electrical equipment and insulating liquids containing PCBs
BIP 0074:2006 BIP 0074:2006. Measuring the effectiveness of your ISMS implementations based on ISO/IEC 27001
DD 9999:2005 DD 9999:2005. Code of practice for fire safety in the design, construction and use of buildings
BS EN 12629-6:2004 BS EN 12629-6:2004. Machines for the manufacture of constructional products from concrete and calcium-silicate. Safety. Stationary and mobile equipment for the manufacture of precast reinforced products
06/30133245 DC 06/30133245 DC. EN 1501-5. Refuse collection vehicles and their associated lifting devices. General requirements and safety requirements. Part 5. Lifting devices for refuse collection vehicles
BS EN 13591:2005 BS EN 13591:2005. Food processing machinery. Fixed deck oven loaders. Safety and hygiene requirements
BS EN 13288:2005 BS EN 13288:2005. Food processing machinery. Bowl lifting and tilting machines. Safety and hygiene requirements.
BS EN 13389:2005 BS EN 13389:2005. Food processing machinery. Mixers with horizontal shafts. Safety and hygiene requirements
BS EN 12851:2005 BS EN 12851:2005. Food processing machinery. Catering attachments for machines having an auxiliary drive hub. Safety and hygiene requirements
DD CLC/TS 50459-6:2005 DD CLC/TS 50459-6:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Audible information
DD CLC/TS 50459-5:2005 DD CLC/TS 50459-5:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Symbols
DD CLC/TS 50459-4:2005 DD CLC/TS 50459-4:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Data entry for the ERTMS/ETCS/GSM-R systems
DD CLC/TS 50459-2:2005 DD CLC/TS 50459-2:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Ergonomic arrangements of ERTMS/ETCS information
DD CLC/TS 50459-1:2005 DD CLC/TS 50459-1:2005. Railway applications. Communication, signalling and processing systems. European rail traffic management system. Driver-machine interface. Ergonomic principles for the presentation of ERTMS/ETCS/GSM-R information
BS ISO 9926-3:2005 BS ISO 9926-3:2005. Cranes. Training of drivers. Tower cranes
BS ISO 1940-1:2003 BS ISO 1940-1:2003. Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state. Specification and verification of balance tolerances
DD IEC/PAS 61996-2:2005 DD IEC/PAS 61996-2:2005. Maritime navigation and radiocommunication equipment and systems. Shipborne voyage data recorder (VDR). Simplified voyage data recorder (S-VDR). Performance requirements. Methods of testing and required test results
BS EN 1744-4:2005 BS EN 1744-4:2005. Tests for chemical properties of aggregates. Determination of water susceptibility of fillers for bituminous mixtures
BIP 0073:2005 BIP 0073:2005. Guide to the implementation and auditing of ISMS controls based on ISO/IEC 27001
BIP 0072:2005 BIP 0072:2005. Are you ready for a BS ISO/IEC 27001 ISMS audit?
BIP 0071:2005 BIP 0071:2005. Guidelines on Requirements and Preparations for ISMS Certification based on ISO/IEC 27001
KIT 174 KIT 174. Gas fire appliances kit (BS 5871)
BIP 3035:2005 BIP 3035:2005. OH&S management systems. A practical approach – Video & CD
BIP 3033:2005 BIP 3033:2005. How to lead OH&S risk management – Video and CD
BIP 3029:2005 BIP 3029:2005. Connor. The ISO 9001:2000 road movie. Leadership skills for customer satisfaction – Video and CD
05/30133005 DC 05/30133005 DC. ISO 21847-3. Nuclear fuel technology. Alpha spectrometry. Part 3. Determination of uranium 232 in uranium and its compounds
BIP 3031:2005 BIP 3031:2005. The ISO 14000 challenge. Environmental management – Video and CD
BIP 3027:2005 BIP 3027:2005. Gorilla in the midst. Auditing to add value – Video & CD
BIP 3039:2005 BIP 3039:2005. Introducing the tools for continuous improvement – Video & CD
BIP 3026:2005 BIP 3026:2005. Introducing the tools for continuous improvement – DVD & CD
BIP 3028:2005 BIP 3028:2005. Gorilla in the midst. Auditing to add value – DVD & CD
BIP 3030:2005 BIP 3030:2005. Connor. The ISO 9001:2000 road movie. Leadership skills for customer satisfaction – DVD and CD
BIP 3032:2005 BIP 3032:2005. The ISO 14000 challenge. Environmental management – DVD and CD
BIP 3034:2005 BIP 3034:2005. How to lead OH&S risk management – DVD and CD
BIP 3036:2005 BIP 3036:2005. OH&S management systems. A practical approach – DVD & CD
PD CEN/TR 15160:2005 PD CEN/TR 15160:2005. Petroleum and related products. Applicability of diesel fuel test methods for fatty acid methyl esters (FAME). Information and results on round robin tests
CWA 15249:2005 CWA 15249:2005. Guidance information for naming, versioning, evolution and maintenance of element declarations and application profiles
CWA 15248:2005 CWA 15248:2005. Guidelines for machine-processable representation of Dublin Core application profiles
CWA 15247:2005 CWA 15247:2005. Guidance information for the deployment of Dublin Core metadata in corporate environments
CWA 15246:2005 CWA 15246:2005. Guidance for the deployment of the EU e-government metadata framework
CWA 15245:2005 CWA 15245:2005. EU e-government metadata framework
CWA 15244:2005 CWA 15244:2005. Guidance information for the deployment of Dublin Core metadata
CWA 15263:2005 CWA 15263:2005. Analysis of privacy protection technologies, privacy-enhancing technologies (PET), privacy management systems (PMS) and identity management systems (IMS), the drivers thereof and the need for standardization
CWA 15262:2005 CWA 15262:2005. Inventory of data protection auditing practices
CWA 15264-3:2005 CWA 15264-3:2005. User requirements for a European interoperable eID system within a smart card infrastructure
CWA 15264-2:2005 CWA 15264-2:2005. Best practice manual for card scheme operators exploiting a multi-application card scheme incorporating interoperable IAS services
CWA 15264-1:2005 CWA 15264-1:2005. Architecture for a European interoperable eID system within a smart card infrastructure
BS ISO 22090-3:2004 BS ISO 22090-3:2004. Ships and marine technology. Transmitting heading devices (THDs). GNSS principles
BS ISO/IEC 24723:2006 BS ISO/IEC 24723:2006. Information technology. Automatic identification and data capture techniques. EAN.UCC composite bar code symbology specification
05/30132762 DC 05/30132762 DC. prEN 15229. Plastics piping systems. Piping systems for non-pressure underground drainage and sewerage. Performance requirements for thermoplastics manholes and inspection chambers
ISO5355 : 2005 EDTN4 ISO5355 : 2005 EDTN4. ISO5355 : 2005 Alpine ski-boots – Requirements and test methods
05/30132752 DC 05/30132752 DC. ISO 15968. Direct reduced iron. Determination of apparent density and water absorption of hot briquetted iron (HBI)
05/30132701 DC 05/30132701 DC. IEC 62271-300 ED 1. High-voltage switchgear and controlgear. Part 300. Seismic qualification of alternating current circuit-breakers
05/30132689 DC 05/30132689 DC. IEC 60350 AMD 2. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance
BS EN 60068-2-58:2004 BS EN 60068-2-58:2004. Environmental testing. Tests. Test Td. Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD)
BS ISO 20957-1:2005 BS ISO 20957-1:2005. Stationary training equipment. General safety requirements and test methods
BS ISO 20957-2:2005 BS ISO 20957-2:2005. Stationary training equipment. Strength training equipment. Additional specific safety requirements and test methods
BS 2000-284:2004, IP 284:2004 BS 2000-284:2004, IP 284:2004. Methods of test for petroleum and its products. Determination of unsaponifiable and saponifiable matter in oils, fats and waxes
BS 2000-182:2005, IP 182:2005 BS 2000-182:2005, IP 182:2005. Methods of test for petroleum and its products. Determination of inorganic acidity of petroleum products. Colour indicator titration method
BS 2000-168:2003, IP 168:2003 BS 2000-168:2003, IP 168:2003. Methods of test for petroleum and its products. Determination of rolling bearing performance of lubricating grease
BS 2000-156:2005, IP 156:2005 BS 2000-156:2005, IP 156:2005. Methods of test for petroleum and its products. Determination of hydrocarbon types in petroleum products. Fluorescent indicator adsorption method
CWA 15261-3:2005 CWA 15261-3:2005. Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in creep testing
BS 2000-143:2004, IP 143:2004 BS 2000-143:2004, IP 143:2004. Methods of test for petroleum and its products. Determination of asphaltenes (heptane insolubles)in crude petroleum and petroleum products
CWA 15261-2:2005 CWA 15261-2:2005. Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in tensile testing
CWA 15261-1:2005 CWA 15261-1:2005. Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in low-cycle fatigue testing
BS 2000-138:2002, IP 138:2002 BS 2000-138:2002, IP 138:2002. Methods of test for petroleum and its products. Determination of oxidation stability of aviation fuel. Potential residue method
BS EN 61058-2-4:2005 BS EN 61058-2-4:2005. Switches for appliances. Particular requirements for independently mounted switches
BS 2000-129:2003, IP 19:2003 BS 2000-129:2003, IP 19:2003. Methods of test for petroleum and its products. Determination of bromine number. Colour indicator titration method
BS EN 60335-2-31:2003 BS EN 60335-2-31:2003. Household and similar electrical appliances. Safety. Particular requirements for range hoods
BS 2000-19:2003, IP 19:2003 BS 2000-19:2003, IP 19:2003. Methods of test for petroleum and its products. Determination of demulsibility characteristics of lubricating oil
05/30132567 DC 05/30132567 DC. IEC 60335-2-103 AMD 1. Household and similar electrical appliances. Safety. Part 2-103. Particular requirements for drives for gates, doors and windows
BS 2000-121:2005, IP 121:2005 BS 2000-121:2005, IP 121:2005. Methods of test for petroleum and its products. Determination of oil separation from lubricating grease. Pressure filtration method
BS 2000-112:2005, IP 112:2005 BS 2000-112:2005, IP 112:2005. Methods of test for petroleum and its products. Determination of corrosiveness to copper of lubricating grease. Copper strip method
PD CEN/TR 15225:2005 PD CEN/TR 15225:2005. Guidance on factory production control for the CE marking (attestationof conformity 2+) of designed masonry mortars
PD CEN/TR 15235:2005 PD CEN/TR 15235:2005. Welding. Methods for assessing imperfections in metallic structures
BS EN ISO 10426-5:2005 BS EN ISO 10426-5:2005. Petroleum and natural gas industries. Cements and materials for well cementing. Determination of shrinkage and expansion of well cement formulations at atmospheric pressure
BS EN ISO 7686:2005 BS EN ISO 7686:2005. Plastics pipes and fittings. Determination of opacity
05/30132503 DC 05/30132503 DC. BS ISO 16653-2. Mobile elevating work platforms. Design, calculations, safety requirements and test methods relative to special features. Part 2. MEWPs with non-conductive (insulating) components
05/30132502 DC 05/30132502 DC. ISO 4468. Gear hobs. Accuracy requirements
BIP 0008-3:2005 BIP 0008-3:2005. Code of practice for legal admissibility and evidential weight of linking electronic identity to documents
BIP 0008-2:2005 BIP 0008-2:2005. Code of practice for legal admissibility and evidential weight of information communicated electronically
BIP 3025:2005 BIP 3025:2005. Policybase CD-ROM
BIP 2082:2005 BIP 2082:2005. Electrician’s Guide to the Building Regulations. Including approved Document P: Electrical Safety in Dwellings
PD IEC/TR 62154:2005 PD IEC/TR 62154:2005. Terminology in the area of Information structures, documentation and graphical symbols
BS EN 14654-1:2005 BS EN 14654-1:2005. Management and control of cleaning operations in drains and sewers. Sewer cleaning
ISO8713 : 2005 EDTN2 ISO8713 : 2005 EDTN2. ISO 8713 : 2005 Electric road vehicles – Vocabulary
06/30132356 DC 06/30132356 DC. ISO 22007-4. Plastics. Determination of thermal conductivity and thermal diffusivity. Part 4. Laser flash method
BS ISO 16564:2004 BS ISO 16564:2004. Rubber, raw natural. Determination of average molecular mass and molecular-mass distribution by size exclusion chromatography (SEC)
BS EN 60534-1:2005 BS EN 60534-1:2005. Industrial-process control valves. Control valve terminology and general considerations
BS EN ISO 10993-18:2005 BS EN ISO 10993-18:2005. Biological evaluation of medical devices. Chemical characterization of materials
BS ISO 8820-2:2005 BS ISO 8820-2:2005. Road vehicles. Fuse-links. User’s guide
BS ISO 11452-4:2005 BS ISO 11452-4:2005. Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Bulk current injection (BCI)
05/30132291 DC 05/30132291 DC. IEC 60061-1. Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 1. Lamp caps Amd. 37. Part 2. Lampholders – Amendment 34. Part 3. Gauges -Amendment 36. Part 4. Guidelines and general information A.10
ISO6594 : 2006 EDTN 2 ISO6594 : 2006 EDTN 2. ISO6594 : 2006 Cast iron drainage pipes and fittings – Spigot series
PD EN 14035-31:2005 PD EN 14035-31:2005. Fireworks. Shell-in-mortars. Specification and test methods

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Sell: DIN Standards (DIN EN) page 18-2 In the Cheapest

July 30th, 2009 | hench2004

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm

Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Closed User Group (CUG) supplementary service – Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 300138-6 V 1.5.1 (2002-04) as German Standard) DIN EN 300138-6-2002
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Restriction (CLIR) supplementary service – Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 300093-4 V 1.3.1 (2002-04) as German Standard) DIN EN 300093-4-2002
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Calling Line Identification Presentation (CLIP) supplementary service – Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 300092-6 V 1.4.1 (2002-04) as German Standard) DIN EN 300092-6-2002
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Call Waiting (CW) supplementary service – Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 300058-6 V 1.4.1 (2002-04) as German Standard) DIN EN 300058-6-2002
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the “b” service entry point for Virtual Private Network (VPN) applications – Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 301060-6 V 1.1.4 (1999-11) as German standard) DIN EN 301060-6-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the “b” service entry point for Virtual Private Network (VPN) applications – Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 301060-4 V 1.1.4 (1999-08) as German standard) DIN EN 301060-4-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the “b” service entry point for Virtual Private Network (VPN) applications – Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorsement of the English version EN 301060-3 V 1.1.3 (1998-11) as German standard) DIN EN 301060-3-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol; Basic call control; enhancement at the “b” service entry point for Virtual Private Network (VPN) applications – Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 301060-2 V 1.1.3 (1998-11) as German standard) DIN EN 301060-2-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Signalling network layer for circuit-mode basic call control – Part 4: Test Suite Structure and Test Purposes (TSS&TP) specification for the user; English version ETS 300403-4:1997 DIN ETS 300403-4-1997
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Generic functional protocol for the support of supplementary services at the “b” service entry point for Virtual Private Network (VPN) applications – Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network (Endorsement of the English version EN 301061-5 V 1.1.3 (1998-10) as German standard) DIN EN 301061-5-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Generic functional protocol for the support of supplementary services at the “b” service entry point for Virtual Private Network (VPN) applications – Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the use (Endorsement of the English version EN 301061-3 V 1.1.3 (1998-10) as German standard) DIN EN 301061-3-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Generic functional protocol for the support of supplementary services at the “b” service entry point for Virtual Private Network (VPN) applications – Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 301061-2 V 1.1.3 (1998-10) as German standard) DIN EN 301061-2-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Data link layer – Part 5: Protocol Implementation Conformance Statement (PICS) proforma specification for the frame relay protocol; English version ETS 300402-5:1996 DIN ETS 300402-5-1997
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Data link layer – Part 3: Frame relay protocol specification; English version ETS 300402-3:1996 DIN ETS 300402-3-1997
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Data link layer – Part 1: General aspects [ITU-T Q.920 (1993), modified]; English version ETS 300402-1:1995 DIN ETS 300402-1-1996
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) protocol – Basic call control; enhancement at the “b” service entry point for Virtual Private Network (VPN) applications – Part 1: Protocol specification (Endorsement of the English version EN 301060-1 V 1.2.2 (1998-04) as German standard) DIN EN 301060-1-2000
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) and Signalling System No.7 (SS7) protocols; Signalling application for the mobility management service on the alpha interface – Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network (Endorsement of the English version EN 301144-5 V 1.1.5 (2000-05) as German standard) DIN EN 301144-5-2001
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 protocols; Signalling application for the mobility management service on the alpha interface – Part 2: Protocol Implementation conformance Statement (PICS) proforma specification (Endorsement of the English version EN 301144-2 V 1.1.1 (2000-10) as German standard) DIN EN 301144-2-2001
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1 – Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 302094-4 V 1.1.1 (2002-02) as German Standard) DIN EN 302094-4-2002
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1 – Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorsement of the English version EN 302094-3 V 1.1.1 (2001-09) as German Standard) DIN EN 302094-3-2002
Integrated Services Digital Network (ISDN) – Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 (SS7) protocols; Call Forwarding on Not Reachable (CFNRc) supplementary service for Cordless Terminal Mobility (CTM) phase 1 – Part 1: Protocol specification (Endorsement of the English version EN 302094-1 V 1.1.3 (1999-09) as German Standard) DIN EN 302094-1-2000
Integrated Services Digital Network (ISDN) – Definition and usage of cause and location in Digital Subscriber Signalling System No. one (DSS1) and Signalling System No. 7 (SS7) ISDN User Part (ISUP) (ITU-T Recommendation Q.850 (1998) with addendum, modified) (Endorsement of the English version EN 300485 V 1.3.1 (2001-04) as German standard) DIN EN 300485-2001
Integrated Services Digital Network (ISDN) – Connected Line Identification Restriction (COLR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 300098-1 V 1.2.4 (1998-06) as German standard) DIN EN 300098-4-1999
Integrated Services Digital Network (ISDN) – Connected Line Identification Presentation (COLP) supplementary service – Service description (Endorsement of the English version EN 300094 V 2.1.1 (2000-06) as German standard) DIN EN 300094-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 300185-6 V 1.3.4 (1999-11) as German standard) DIN EN 300185-6-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network (Endorsement of the English version EN 300185-5 V 1.2.4 (1998-06) as German standard) DIN EN 300185-5-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 300185-4 V 1.3.3 (2000-05) as German standard) DIN EN 300185-4-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service – Service description (Endorsement of the English version ETS 300183:1992/A1:1998 as German standard) DIN ETS 300183/A1-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorsement of the English version EN 300185-3 V 1.2.4 (1998-06) as German standard) DIN EN 300185-3-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 300185-2 V 1.2.4 (1998-06) as German standard) DIN EN 300185-2-2000
Integrated Services Digital Network (ISDN) – Conference call, add-on (CONF) supplementary service – Digital Subscriber Signalling System No. one (DSS 1) protocol – Part 1: Protocol specification (Endorsement of the English version EN 300185-1 V 1.2.4 (1998-06) as German standard) DIN EN 300185-1-2000
Integrated Services Digital Network (ISDN) – Completion of Calls to Busy Subscriber (CCBS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 4: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the user (Endorsement of the English version EN 300359-4 V 1.4.1 (2001-11) as German Standard) DIN EN 300359-4-2002
Integrated Services Digital Network (ISDN) – Completion of Calls to Busy Subscriber (CCBS) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 300359-2 V 1.4.1 (2001-06) as German Standard) DIN EN 300359-2-2002
Integrated Services Digital Network (ISDN) – Completion of Calls to Busy Subscriber (CCBS) supplementary service – Functional capabilities and information flows; English version ETS 300358:1995 DIN ETS 300358-1996
Integrated Services Digital Network (ISDN) – Completion of Calls on No Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorsement of the English version EN 301065-3 V 1.1.3 (1998-10) as German standard) DIN EN 301065-3-2000
Integrated Services Digital Network (ISDN) – Completion of Calls on No Reply (CCNR) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 1: Protocol specification (Endorsement of the English version EN 301065-1 V 1.2.2 (1998-10) as German standard) DIN EN 301065-1-2000
Integrated Services Digital Network (ISDN) – Completion of Calls on No Reply (CCNR) supplementary service – Service description (Endorsement of the English version EN 301134 V 1.1.1 (1998-10) as German standard) DIN EN 301134-2000
Integrated Services Digital Network (ISDN) – Closed User Group (CUG) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 1: Protocol specification (Endorsement of the English version EN 300138-1 V 1.3.4 (1998-06) as German standard) DIN EN 300138-1-2000
Integrated Services Digital Network (ISDN) – Closed User Group (CUG) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 3: Test Suite Structure and Test Purposes (TSS&TP) specification for the user (Endorsement of the English version EN 300138-3 V 1.3.4 (1998-06) as German standard) DIN EN 300138-3-2000
Integrated Services Digital Network (ISDN) – Closed User Group (CUG) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 300138-2 V 1.3.4 (1998-06) as German standard) DIN EN 300138-2-2000
Integrated Services Digital Network (ISDN) – Calling Line Identification Presentation (CLIP) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 1: Protocol specification (Endorsement of the English version EN 300092-1 V 2.1.1 (2001-02) as German standard) DIN EN 300092-1-2001
Integrated Services Digital Network (ISDN) – Call Waiting (CW) supplementary service – Service description; English version ETS 300056:1991/A1:1996 DIN ETS 300056/A1-1997
Integrated Services Digital Network (ISDN) – Call Hold (HOLD) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network (Endorsement of the English version EN 300141-5 V 1.2.4 (1998-06) as German standard) DIN EN 300141-5-2000
Integrated Services Digital Network (ISDN) – Call Hold (HOLD) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 1: Protocol specification (Endorsement of the English version EN 300141-1 V 1.2.4 (1998-06) as German standard) DIN EN 300141-1-2000
Integrated Services Digital Network (ISDN) – Call Forwarding Unconditional (CFU) supplementary service – Service description; English version ETS 300200:1994 DIN ETS 300200-1995
Integrated Services Digital Network (ISDN) – Call Forwarding Unconditional (CFU) supplementary service – Functional capabilities and information flows; English version ETS 300204:1994 DIN ETS 300204-1995
Integrated Services Digital Network (ISDN) – Call Forwarding No Reply (CFNR) supplementary service – Service description (Endorsement of the English version EN 300201 V 1.2.1 (2001-05) as German standard) DIN EN 300201-2002
Integrated Services Digital Network (ISDN) – Call Forwarding Busy (CFB) supplementary service – Service description (Endorsement of the English version EN 300199 V 1.2.1 (2001-06) as German standard) DIN EN 300199-2002
Integrated Services Digital Network (ISDN) – Call Deflection (CD) supplementary service – Service description; English version ETS 300202:1994 DIN ETS 300202-1995
Integrated Services Digital Network (ISDN) – Call Deflection (CD) supplementary service – Service description; English version 300202:1995/A1:1996 DIN ETS 300202/A1-1997
Integrated Services Digital Network (ISDN) – Call Deflection (CD) supplementary service – Functional capabilities and information flows; English version ETS 300206:1994 DIN ETS 300206-1995
Integrated Services Digital Network (ISDN) – Basic User Network Interface (UNI) – Part 7: Abstract Test Suite (ATS) specification for interface IB (Endorsement of the English version ETS 300012-7:1998 as German Standard) DIN ETS 300012-7-2000
Integrated Services Digital Network (ISDN) – Basic User Network Interface (UNI) – Part 6: Abstract Test Suite (ATS) specification for interface IA (Endorsement of the English version ETS 300012-6:1998 as German Standard) DIN ETS 300012-6-2000
Integrated Services Digital Network (ISDN) – Basic User Network Interface (UNI) – Part 4: Conformance test specification for interface IA (Endorsement of the English version ETS 300012-4:1998 as German Standard) DIN ETS 300012-4-2000
Integrated Services Digital Network (ISDN) – Basic User Network Interface (UNI) – Part 3: Implementation Conformance Statement (ICS) and Implementation eXtra Information for Testing (IXIT) specification for interface IB (Endorsement of the English version ETS 300012-3:1998 as German Standard) DIN ETS 300012-3-2000
Integrated Services Digital Network (ISDN) – Autographic conference teleservice – Service description; English version ETS 300675:1996 DIN ETS 300675-1997
Integrated Services Digital Network (ISDN) – Audiovisual services – Videotelephone systems and terminal equipment operating on one or two 64 kbit/s channels; English version ETS 300145:1996 DIN ETS 300145-1996
Integrated Services Digital Network (ISDN) – Audiovisual services – Inband signalling procedures for audiovisual terminals using digital channels up to 2048 kbit/s; English version ETS 300143:1994/A1:1996 DIN ETS 300143/A1-1996
Integrated Services Digital Network (ISDN) – Audiovisual services – Frame structure for a 64 kbit/s to 1920 kbit/s channel and associated syntax for inband signalling; English version ETS 300144:1996 DIN ETS 300144-1996
Integrated Services Digital Network (ISDN) – Attachment requirements for terminal equipment to connect to an ISDN using ISDN basic access – Layer 3 aspects; English version ETS 300104:1991/A1:1994 DIN ETS 300104/A1-1994
Integrated Services Digital Network (ISDN) – Application of the ISDN User Part (ISUP) of ITU-T Signalling System No. 7 (SS7) for international ISDN interconnections (ISUP version 1); Amendment 1: International Emergency Preference Scheme (IEPS) service [ITU-T Recommendation Q.767 Amendment 1 (2002), modified] (Endorsement of the English version EN 300121 V1.2.1 (2003-07) as German standard) DIN EN 300121-2004
Integrated Services Digital Network (ISDN) – Advice of Charge (AOC) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification for the network (Endorsement of the English version EN 300182-6 V 1.4.1 (2001-06) as German Standard) DIN EN 300182-6-2002
Integrated Services Digital Network (ISDN) – Advice of Charge (AOC) supplementary service; Digital Subscriber Signalling System No. one (DSS1) protocol – Part 5: Test Suite Structure and Test Purposes (TSS&TP) specification for the network (Endorsement of the English version EN 300182-5 V 1.4.1 (2001-06) as German Standard) DIN EN 300182-5-2002
Integrated Services Digital Network (ISDN) – Advice of Charge (AOC) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification (Endorsement of the English version EN 300182-2 V 1.3.4 (1999-09) as German standard) DIN EN 300182-2-2000
Integrated Services Digital Network (ISDN) – Advice of charge (AOC) supplementary service – Digital Subscriber Signalling System No. one (DSS1) protocol – Part 1: Protocol specification (Endorsement of the English version EN 300182-1 V 1.3.6 (1999-09) as German standard) DIN EN 300182-1-2000
Integrated Services Digital Network (ISDN) – Access digital section for ISDN primary rate; English version ETS 300233:1994 DIN ETS 300233-1994
Integrated Services Digital Network (ISDN) – Access digital section for ISDN basic rate; English version ETS 300297:1995/A1:1996 DIN ETS 300297/A1-1996
Integrated Services Digital Network (ISDN) – Access digital section for ISDN basic access; English version ETS 300297:1995 DIN ETS 300297-1995
Integrated Service Digital Network (ISDN); Signalling System No. 7 (SS7); Bearer Independent Call Control (BICC) – Signalling procedures in an ATM/IP/.. backbone network; Capability Set 1 (CS1) – Part 1: Protocol specification (ITU-T Recommendations Q.1901 and Q.765.5, modified) (Endorsement of the English version EN 301848-1 V 1.1.1 (2001-02) as German Standard) DIN EN 301848-1-2001
Integrated Service Digital Network (ISDN) – Signalling System No. 7 (SS7); ISDN User part (ISUP) version 4 for the international interface – Part 21: Anonymous Call rejection (ACR) supplementary service (ITU-T Recommendation Q.731, clause 4 (1993)) (Endorsement of the English version EN 300356-21 V 4.2.1 (2001-07) as German standard) DIN EN 300356-21-2002
Integrated optics – Vocabulary – Part 2: Terms used in classification (ISO 11807-2:2001); German version EN ISO 11807-2:2005 DIN EN ISO 11807-2-2005
Integrated optics – Vocabulary – Part 1: Basic terms and symbols (ISO 11807-1:2001); German version EN ISO 11807-1:2005 DIN EN ISO 11807-1-2005
Integrated optics – Near-field-measurement for single-mode optical chip components DIN 58002-2001
Integrated optics – Interfaces – Parameters relevant to coupling properties (ISO 14881:2001); German version EN ISO 14881:2005 DIN EN ISO 14881-2005
Integrated film circuits; substrates DIN 41850-1-1986
Integrated circuits – Memory devices pin configurations (IEC 61964:1999); German version EN 61964:1999 DIN EN 61964-2000
Integrated circuits – Measurement of electromagnetic immunity, 150 kHz to 1 GHz – Part 5: Workbench Faraday cage method (IEC 62132-5:2005); German version EN 62132-5:2006 DIN EN 62132-5-2006
Integrated circuits – Measurement of electromagnetic immunity, 150 kHz to 1 GHz – Part 3: Bulk current injection (BCI) method (IEC 62132-3:2007); German version EN 62132-3:2007 DIN EN 62132-3-2008
Integrated circuits – Measurement of electromagnetic immunity, 150 kHz to 1 GHz – Part 1: General conditions and definitions (IEC 62132-1:2006); German version EN 62132-1:2006, Corrigenda to DIN EN 62132-1:2006-06; CENELEC-Corrigendum November 2006 to EN 62132-1:2006 DIN EN 62132-1 Berichtigung 1-2007
Integrated circuits – Measurement of electromagnetic immunity, 150 kHz to 1 GHz – Part 1: General conditions and definitions (IEC 62132-1:2006); German version EN 62132-1:2006 DIN EN 62132-1-2006
Integrated circuits – Measurement of electromagnetic immunity 150 kHz to 1 GHz – Part 4: Direct RF power injection method (IEC 62132-4:2006); German version EN 62132-4:2006 DIN EN 62132-4-2006
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz – Part 6: Measurement of conducted emissions – Magnetic probe method (IEC 61967-6:2002 + A1:2008); German version EN 61967-6:2002 + A1:2008 DIN EN 61967-6-2008
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz – Part 4: Measurement of conducted emissions – 1 ohm/150 ohm direct coupling method (IEC 61967-4:2002 + A1:2006); German version EN 61967-4:2002 + A1:2006 DIN EN 61967-4-2006
Integrated circuits – Measurement of electromagnetic emissions, 150 kHz to 1 GHz – Part 2: Measurement of radiated emissions – TEM cell and wideband TEM cell method (IEC 61967-2:2005); German version EN 61967-2:2005 DIN EN 61967-2-2006
Integrated circuits – Manufacturing line approval application guideline (IEC 61943:1999); German version EN 61943:1999 DIN EN 61943-2001
Integral leakage rate test of containment with the absolute pressure method DIN 25436-1980
Insulators RMk DIN 48140-1960
Insulators of ceramic material or glass for overhead lines with a nominal voltage greater than 1000 V – Impulse puncture testing in air (IEC 61211:2004); German version EN 61211:2005 DIN EN 61211-2005
Insulators for pantographs for light rail vehicles and tramcars DIN 43169-1987
Insulators for overhead power lines; pin type insulators St, rated voltages 10 to 30 kV DIN 48004-1969
Insulators for overhead lines with a nominal voltage above 1 kV – Ceramic insulators for a.c. systems – Characteristics of insulator units of the long rod type (IEC 60433:1998); German version EN 60433:1998 DIN EN 60433-1999
Insulators for overhead lines – Part 2: Long-rod insulators LG with clevis caps DIN 48006-2-2005
Insulators for overhead lines – Part 1: Long-rod insulators LP with socket caps DIN 48006-1-2005
Insulators for overhead equipment, 1000 V a.c./1500 V d.c.; mounting dimensions DIN 43188-1980
Insulators for electric fence installations [VDE Specification] DIN VDE 0669-1983
Insulators for carbon brush-holders for electric traction DIN 43053-1964
Insulators – Tests on indoor post insulators of organic material for systems with nominal voltages greater than 1 kV up to but not including 300 kV (IEC 60660:1999); German version EN 60660:1999 DIN EN 60660-2000
Insulator spindles for telecommunication overhead-lines; notches DIN 48055-4-1971
Insulator pin, cylindrical DIN 48050-2-1963
Insulation work on industrial installations and building equipment – Execution of thermal and cold insulations DIN 4140-2008
Insulation systems of electrical equipment; performance evaluation; identical with IEC 60791:1984 (report) DIN VDE 0302-5-1988
Insulation systems of electrical equipment; electrical endurance; general considerations, evaluation procedures; identical with IEC 60727-1:1982 (report) DIN VDE 0302-4-1988
Insulation co-ordination for equipment within low-voltages systems; partial discharge tests; application guide DIN VDE 0110-20-1990
Insulation coordination for equipment within low-voltage systems – Supplement 3: Interface consideration; Application guide (IEC/TR 60664-2-2:2002) DIN EN 60664-1 Bb.3-2003
Insulation coordination for equipment within low-voltage systems – Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm (IEC 60664-5:2007); German version EN 60664-5:2007 DIN EN 60664-5-2008
Insulation coordination for equipment within low-voltage systems – Part 4: Consideration of high-frequency voltage stress (IEC 60664-4:2005); German version EN 60664-4:2006 DIN EN 60664-4-2006
Insulation coordination for equipment within low-voltage systems – Part 3: Use of coating, potting or moulding for protection against pollution (IEC 60664-3:2003); German version EN 60664-3:2003 DIN EN 60664-3-2003
Insulation co-ordination – Part 2: Application guide (IEC 60071-2:1996); German version EN 60071-2:1997 DIN EN 60071-2-1997
Insulation bushings, group rings for plastic insulated communication cables DIN 47661-2-1973
Insulating, sheathing and covering materials for low-voltage energy cables – Part 0: General introduction; German version EN 50363-0:2005 DIN EN 50363-0-2006
Insulating, sheathing and covering materials for low voltage energy cables – Part 6: Halogen-free, cross-linked sheathing compounds; German version EN 50363-6:2005 DIN EN 50363-6-2006
Insulating, sheathing and covering materials for low voltage energy cables – Part 5: Halogen-free, cross-linked insulating compounds; German version EN 50363-5:2005 DIN EN 50363-5-2006
Insulating, sheathing and covering materials for low voltage energy cables – Part 3: PVC insulating compounds; German version EN 50363-3:2005 DIN EN 50363-3-2006
Insulating, sheathing and covering materials for low voltage energy cables – Part 2-2: Cross-linked elastomeric covering compounds; German version EN 50363-2-2:2005 DIN EN 50363-2-2-2006
Insulating, sheathing and covering materials for low voltage energy cables – Part 2-1: Cross-linked elastomeric sheathing compounds; German version EN 50363-2-1:2005 DIN EN 50363-2-1-2006
Insulating, sheathing and covering materials for low voltage energy cables – Part 10-1: Miscellaneous sheathing compounds – Cross-linked polyvinyl chloride (XLPVC); German version EN 50363-10-1:2005 DIN EN 50363-10-1-2006
Insulating refractory products – Part 6: Determination of permanent change in dimensions of shaped products on heating (ISO 2477:1987); German version EN 1094-6:1998 DIN EN 1094-6-1998
Insulating refractory products – Part 1: Terminology, classification and methods of test for high temperature insulation wool products; English version of DIN EN 1094-1:2008-09 DIN EN 1094-1-2008
Insulating poles (insulating sticks) and universal tool attachments (fittings) for live working (IEC 60832:1988, modified); German version EN 60832:1996 DIN EN 60832-1998
Insulating oil – Determination of fibre contamination by the counting method using a microscope; German version EN 50353:2001 DIN EN 50353-2002
Insulating materials based on mica – Part 3: Specifications for individual materials – Sheet 9: Moulding micanite (IEC 60371-3-9:1995 + A1:2007); German version EN 60371-3-9:1995 + A1:2007 DIN EN 60371-3-9-2008
Insulating materials based on mica – Part 3: Specifications for individual materials – Sheet 5 : Glass-backed mica paper with an epoxy resin binder for post-impregnation (VPI) (IEC 60371-3-5:2005); German version EN 60371-3-5:2006, Corrigenda to DIN EN 60371-3-5 (VDE 0332-3-5):2006-08; CENELEC-Corrigendum November 2006 to EN 60371-3-5:2006 DIN EN 60371-3-5 Berichtigung 1-2007
Insulating Materials – Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes – Part 2: Methods of test (IEC 61212-2:2006); German version EN 61212-2:2006 DIN EN 61212-2-2007
Insulating materials – Industrial rigid moulded laminated tubes and rods of rectangular and hexagonal cross-section based on thermosetting resins for electrical purposes – Part 3-1: Specifications for individual materials – Tubes and rods of rectangular and hexagonal cross-section (IEC 62011-3-1:2003); German version EN 62011-3-1:2003 DIN EN 62011-3-1-2004
Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-7: Specifications for individual materials – Requirements for rigid laminated sheets based on polyimide resins (IEC 60893-3-7:2003); German version EN 60893-3-7:2004 DIN EN 60893-3-7-2004
Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-4: Specifications for individual materials – Requirements for rigid laminated sheets based on phenolic resins (IEC 60893-3-4:2003); German version EN 60893-3-4:2004 DIN EN 60893-3-4-2004
Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-3: Specifications for individual materials – Requirements for rigid laminated sheets based on melamine resins (IEC 60893-3-3:2003); German version EN 60893-3-3:2004 DIN EN 60893-3-3-2004
Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-2: Specifications for individual materials – Requirements for rigid laminated sheets based on epoxy resins (IEC 60893-3-2:2003); German version EN 60893-3-2:2004 DIN EN 60893-3-2-2004
Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-1: Specifications for individual materials – Requirements for types of industrial rigid laminated sheets (IEC 60893-3-1:2003); German version EN 60893-3-1:2004 DIN EN 60893-3-1-2004
Insulating liquids – Specifications for unused liquids based on synthetic aromatic hydrocarbons (IEC 60867:1993); German version EN 60867:1994 DIN EN 60867-1995
Insulating liquids – Methods for counting and sizing particles (IEC 60970:2007); German version EN 60970:2007 + Corrigendum: 2008 DIN EN 60970-2008
Insulating liquids – Measurement of relative permittivity, dielectric dissipation factor (tan ) and d.c. resistivity (IEC 60247:2004); German version EN 60247:2004 DIN EN 60247-2005
Insulating liquids – Linear flame propagation – Test methods using a glass-fibre tape (IEC 61197:1993); German version EN 61197:1994 DIN EN 61197-1996
Insulating liquids – Determination of the breakdown voltage at power frequency – Test method (IEC 60156:1995); German version EN 60156:1995 DIN EN 60156-1996
Insulating liquids – Determination of acidity – Part 2: Colourimetric titration (IEC 62021-2:2007); German version EN 62021-2:2007 DIN EN 62021-2-2008
Insulating liquids – Determination of acidity – Part 1: Automatic potentiometric titration (IEC 62021-1:2003); German version EN 62021-1:2003 DIN EN 62021-1-2004
Insulating liquids – Contamination by polychlorinated biphenyls (PCBs) – Method of determination by capillary column gas chromatography (IEC 61619:1997); German version EN 61619:1997 DIN EN 61619-1998
Insulating foam-filled tubes and solid rods for live working (IEC 60855:1985, modified); German version EN 60855:1996 DIN EN 60855-1998
Insulating beats DIN 44932-1984
Insulating and sheathing materials of electric cables – Common test methods – Part 1-1: General application; Measurement of thickness and overall dimensions; Test for determining the mechanical properties (IEC 60811-1-1:1993 + A1:2001); German version EN 60811-1-1:1995 + A1:2001 DIN EN 60811-1-1-2002
Insulating and sheathing materials of electric and optical cables – Common test methods – Part 4-2: Methods specific to polyethylene and polypropylene compounds – Tensile strength and elongation at break after conditioning at elevated temperature – Wrapping test after conditioning at elevated temperature – Wrapping test after thermal ageing in air – Measurement of mass increase – Long-term stability test – Test method for copper-catalyzed oxidative degradation (IEC 60811-4-2:2004); German version EN 60811-4-2:2004 DIN EN 60811-4-2-2005
Insulating and sheathing materials of electric and optical cables – Common test methods – Part 4-1: Methods specific to polyethylene and polypropylene compounds – Resistance to environmental stress cracking – Measurement of the melt flow index – Carbon black and/or mineral filler content measurement in polyethylene by direct combustion – Measurement of carbon black content by thermogravimetric analysis (TGA) – Assessment of carbon black dispersion in polyethylene using a microscope (IEC 60811-4-1:2004); German version EN 60811-4-1:2004 DIN EN 60811-4-1-2005
Insulating and sheathing materials of electric and optical cables – Common test methods – Part 3-2: Methods specific to PVC compounds – Loss of mass test – Thermal stability test (IEC 60811-3-2:1985 + Corr. 1986 + A1:1993 + A2:2003); German version EN 60811-3-2:1995 + A2:2004 DIN EN 60811-3-2-2004
Insulating and sheathing materials of electric and optical cables – Common test methods – Part 2-1: Methods specific to elastomeric compounds; Ozone resistance, hot set and mineral oil immersion tests (IEC 60811-2-1:1998 + A1:2001); German version EN 60811-2-1:1998 + A1:2001 DIN EN 60811-2-1-2002
Insulating and sheathing materials of electric and optical cables – Common test methods – Part 1-3: General application; Methods for determining the density; Water absorption tests; Shrinkage test (IEC 60811-1-3:1993 + A1:2001); German version EN 60811-1-3:1995 + A1:2001 DIN EN 60811-1-3-2002
Insulating and sheathing compounds for cables and flexible cords; rubber sheathing compounds DIN VDE 0207-21-1993
Insulating and sheathing compounds for cables and flexible cords; rubber insulating compounds DIN VDE 0207-20-1993
Instruments transformers for 50 Hz, U 0,6 to 52 kV; voltage transformers U 12 and 24 kV; narrow design, main dimensions, indoor type DIN 42600-9-1985
Instruments for intramedullary nailing; trochanteric reamer DIN 58807-1972
Instruments for intramedullary nailing; reamer DIN 58808-1972
Instruments for intramedullary nailing; nail extractor DIN 58806-1972
Instruments for intramedullary nailing; intermedullary canal reamer DIN 58809-1972
Instruments for intramedullary nailing; guide pin DIN 58802-1-1972
Instruments for intramedullary nailing; guide pin DIN 58802-2-1972
Instruments for intramedullary nailing; extracting hook with thread DIN 58805-1-1972
Instruments and software used for measurements in high-voltage impulse tests – Part 1: Requirements for instruments (IEC 61083-1:2001); German version EN 61083-1:2001 DIN EN 61083-1-2002
Instrumentation to be used in association with non-active surgical implants – General requirements; German version EN 12011:1998 DIN EN 12011-1998
Instrumentation tape; mechanical properties and designation DIN 66208-1-1974
Instrumentation magnetic tape; direct and FM recording DIN 66210-1974
Instrument transformers for 50 Hz, U of 72,5 kV and above – Basic requirements DIN 42601-2003
Instrument transformers for 50 Hz, U 0,6 to 52 kV; current transformers (support-type-insulators) U 12 and 24 kV; narrow design, main dimensions, indoor type DIN 42600-8-1983
Instrument transformers for 50 Hz, HSV 0,6 to 52 kV; current transformers (support-type-insulator) HSV 12 to 36 kV, large design, main dimensions, indoor type DIN 42600-5-1977
Instrument transformers – Three-phase inductive voltage transformers having U up to 52 kV; German version EN 50482:2008 DIN EN 50482-2008
Instrument transformers – Part 8: Electronic current transformers (IEC 60044-8:2002); German version EN 60044-8:2002 DIN EN 60044-8-2003
Instrument transformers – Part 7: Electronic voltage transformers (IEC 60044-7:1999); German version EN 60444-7:2000 DIN EN 60044-7-2000
Instrument transformers – Part 5: Capacitor voltage transformers (IEC 60044-5:2004); German version EN 60044-5:2004, Corrigenda to DIN EN 60044-5 (VDE 0414-44-5):2005-03 DIN EN 60044-5 Berichtigung 1-2005
Instrument transformers – Part 5: Capacitor voltage transformers (IEC 60044-5:2004); German version EN 60044-5:2004 DIN EN 60044-5-2005
Instrument transformers – Part 2: Inductive voltage transformers – Supplement 1: Complementary marking of the rating plate for reduced rated power frequency withstand voltage DIN EN 60044-2 Bb.1-2008
Instrument transformers – Part 1: Current transformers (IEC 60044-1:1996 + A1:2000 + A2:2002); German version EN 60044-1:1999 + A1:2000 + A2:2003 DIN EN 60044-1-2003
Instrument panel-measuring instruments for motor vehicles; built-in diameters DIN 75501-1987
Instructions for use for in-vitro-diagnostic instruments for professional use; German version EN 591:2001 DIN EN 591-2001
Instant coffee – Determination of free and total carbohydrate contents – Method using high-performance anion-exchange chromatography DIN 10780-2003
Installed monitors for the control and detection of gamma radiations contained in recyclable or non-recyclable materials transported by vehicles (IEC 62022:2004, modified); German version EN 62022:2007 DIN EN 62022-2008
Installations switches, AC/DC 10 A, AC/DC 250 V, degree of protection IP 56 DIN 89270-1997
Installations for separation of light liquids – Part 100: Requirements on application of installations for separation of light liquids in accordance with DIN EN 858-1 and DIN EN 858-2 DIN 1999-100-2003
Installations for oil supply systems for oil burners – Part 2: Safety requirements and tests; parts, valves pipes, filters, oil de-aerators, meters; German version EN 12514-2:2000 DIN EN 12514-2-2000
Installations for oil supply systems for oil burners – Part 1: Safety requirements and tests; parts, oil feed pumps, control and safety devices, supply tanks; German version EN 12514-1:2000 DIN EN 12514-1-2000
Installations and equipment for liquefied natural gas – Testing of insulating linings for liquefied natural gas impounding areas; German version EN 12066:1997 DIN EN 12066-1998
Installations and equipment for liquefied natural gas – Testing of foam concentrates designed for generation of medium and high expansion foam and of extinguishing powders used on liquefied natural gas fires; German version EN 12065:1997 DIN EN 12065-1998
Installations and equipment for liquefied natural gas – Suitability testing of gaskets designed for flanged joints used on LNG piping; German version EN 12308:1998 DIN EN 12308-1998
Installations and equipment for liquefied natural gas – Ship to shore interface; German version EN 1532:1997 DIN EN 1532-1997
Installation couplers intended for permanent connection in fixed installations DIN VDE 0606-200-2004
Installation and equipment for liquefied natural gas – Design and testing of marine transfer systems – Part 3: Offshore transfer systems; German version EN 1474-3:2008 DIN EN 1474-3-2009
Installation and equipment for liquefied natural gas – Design and testing of marine transfer systems – Part 2: Design and testing of transfer hoses; German version EN 1474-2:2008 DIN EN 1474-2-2009
Installation and equipment for liquefied natural gas – Design and testing of marine transfer systems – Part 1: Design and testing of transfer arms; German version EN 1474-1:2008 DIN EN 1474-1-2009
Inspection vee blocks; designs, requirements DIN 2274-1981
Inspection and testing of LPG road tankers; German version EN 14334:2005 DIN EN 14334-2005
Inspection and requalification of LPG tanks greater than 13 m underground; German version EN 12820:2002 DIN EN 12820-2002
Inspection and requalification of LPG tanks greater than 13 m overground; German version EN 12819:2002 DIN EN 12819-2002
Inspection after repair, modification of electrical appliances – Periodic inspection on electrical appliances – General requirements for electrical safety DIN VDE 0701-0702-2008
In-situ-gamma-ray spectrometry for nuclide specific environmental measurements DIN 25462-2000
Inset appliances including open fires fired by solid fuels – Requirements and test methods; German version EN 13229:2001+A1:2003+A2:2004, Corrigenda to DIN EN 13229:2005-10; German version EN 13229:2001/AC:2006 and EN 13229:2001/A2:2004/AC:2007 DIN EN 13229 Berichtigung 1-2008
Inset appliances including open fires fired by solid fuels – Requirements and test methods; German version EN 13229:2001 + A1:2003 + A2:2004 DIN EN 13229-2005
In-service inspections for primary coolant circuit components of light water reactors – Part 7: Radiographic testing DIN 25435-7-2003
In-service inspections for primary coolant circuit components of light water reactors – Part 6: Eddy current testing of steam generator heating tubes DIN 25435-6-2003
In-service inspections for primary coolant circuit components of light water reactors – Part 4: Visual inspection DIN 25435-4-2003
In-service inspections for primary coolant circuit components of light water reactors – Part 2: Magnetic particle and penetrant inspection DIN 25435-2-2003
Insert nuts; heavy type for plastics mouldings and pressure die castings with dead hole DIN 16903-4-1991
Inscription of dimensions and tolerances for optical systems; blemishes DIN 58170-54-1980
Inlet valves for flushing cisterns with internal overflow; German version EN 14124:2004 DIN EN 14124-2005
Inland navigation vessels; outboard ladders DIN 83512-1985
Inland navigation vessels; gangways with a length not exceeding 8 m; requirements, types; German version EN 526:1993 DIN EN 526-1993
Inland navigation vessels – Work boats, ship’s boats and lifeboats; German version EN 1914:2009 DIN EN 1914-2009
Inland navigation vessels – Winches for ship operation – Safety requirements; German version EN 13711:2002 DIN EN 13711-2002
Inland navigation vessels – Wheelhouse – Ergonomic and safety requirements; English version of DIN EN 1864:2008-06 DIN EN 1864-2008
Inland navigation vessels – Vocabulary; Trilingual version EN 13551:2003 DIN EN 13551-2003
Inland navigation vessels – Tiltable railings – Stanchion DIN 83510-1997
Inland navigation vessels – Studless anchor chain – Accessories; German version EN 14606:2004 DIN EN 14606-2004
Inland navigation vessels – Stairs with inclination angles of 30° to 45° – Requirements, types; German version EN 13056:2000 DIN EN 13056-2000
Inland navigation vessels – Safety requirements for walkways and working places; German version EN 13281:2000 DIN EN 13281-2000
Inland navigation vessels – Railings for decks – Requirements, types; German version EN 711:1995 DIN EN 711-1995
Inland navigation vessels – Gangways for passenger vessels – Requirements, types; German version EN 14206:2003 DIN EN 14206-2003
Inland navigation vessels – Floating landing stages – Requirements, tests; German version EN 14504:2009 DIN EN 14504-2009
Inland navigation vessels – Equipment for rope leading – Part 4: Rope lead; English version of DIN EN 15272-4:2007-12 DIN EN 15272-4-2007
Inland navigation vessels – Equipment for rope leading – Part 3: Roller fairleads; English version of DIN EN 15272-3:2008-02 DIN EN 15272-3-2008
Inland navigation vessels – Equipment for rope leading – Part 2: Fairlead;English version of DIN EN 15272-2:2007-06 DIN EN 15272-2-2007
Inland navigation vessels – Detachable railings – Stanchion, holder for stanchion DIN 81701-1997
Inland navigation vessels – Connections for the transfer of diesel oil; German version EN 12827:1999 DIN EN 12827-1999
Inland navigation vessels – Connections for the discharge of oily mixture; German version EN 1305:1996 DIN EN 1305-1996
Inland navigation vessels – Boarding ladders; German version EN 1502:1995 DIN EN 1502-1996
Inland navigation vessels – Anchoring, coupling, towing, hauling and mooring systems; German version EN 13573:2009 DIN EN 13573-2009
Injection pumps for Diesel engines; pressure pipe connections DIN 73365-3-1970
Injection equipment for medical use – Part 1: Ampoules for injectables (ISO 9187-1:2006); German and English version EN ISO 9187-1:2008 DIN EN ISO 9187-1-2008
Injection containers for injectables and accessories – Part 5: Freeze drying closures for injection vials (ISO 8362-5:1995) DIN ISO 8362-5-1996
Injection containers for injectables and accessories – Part 3: Aluminium caps for injection vials (ISO 8362-3:2001); German version EN ISO 8362-3:2003; German and English texts DIN EN ISO 8362-3-2003
Injection containers and accessories – Part 4: Injection vials made of moulded glass (ISO 8362-4:2003); German version EN ISO 8362-4:2004, text in German and English DIN EN ISO 8362-4-2004
Injection containers and accessories – Part 1: Injection vials made of glass tubing (ISO 8362-1:2003); German version EN ISO 8362-4:2004, text in German and English DIN EN ISO 8362-1-2004
Inhalational nitric oxide systems – Part 2: Supply systems; German version CEN/TS 14507-2:2003 DIN CEN/TS 14507-2-2003
Inhalational anaesthesia systems – Part 5: Anaesthetic ventilators (ISO 8835-5:2004 + AC:2006) Corrigendum 1 to English version of DIN EN ISO 8835-5:2005-03 DIN EN ISO 8835-5 Corrigendum 1-2006
Inhalational anaesthesia systems – Part 5: Anaesthetic ventilators (ISO 8835-5:2004 + AC:2004); German version EN ISO 8835-5:2004 + AC:2004, Corrigenda to DIN EN ISO 8835-5:2005-03; German version EN ISO 8835-5:2004/AC:2006 DIN EN ISO 8835-5 Berichtigung 1-2006
Inhalational anaesthesia systems – Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004); German version EN ISO 8835-4:2004 + AC:2004 DIN EN ISO 8835-4-2005
Inhalational anaesthesia systems – Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004 + AC:2006) Corrigendum 1 to DIN EN ISO 8835-4:2005-03 DIN EN ISO 8835-4 Corrigendum 1-2006
Inhalational anaesthesia systems – Part 3: Transfer and receiving systems of active anaesthetic gasscavenging systems (ISO 8835-3:2007) English version of DIN EN ISO 8835-3:2007-11 DIN EN ISO 8835-2-2007
Inhalational anaesthesia systems – Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007)English version of DIN EN ISO 8835-3:2007-11 DIN EN ISO 8835-3-2007
Infusion equipment for medical use – Part 9: Fluid lines for use with pressure infusion equipment (ISO 8536-9:2004); German version EN ISO 8536-9:2004 DIN EN ISO 8536-9-2005
Infusion equipment for medical use – Part 8: Infusion equipment for use with pressure infusion apparatus (ISO 8536-8:2004); German version EN ISO 8536-8:2004 DIN EN ISO 8536-8-2005
Infusion equipment for medical use – Part 2: Closures for infusion bottles (ISO 8536-2:2001); German version EN ISO 8536-2:2002, German and English texts DIN EN ISO 8536-2-2003
Infusion equipment for medical use – Part 2: Closures for infusion bottles (ISO 8536-2:2001), Corrigendum to DIN EN ISO 8536-2:2003-02; German version EN ISO 8536-2:2002/AC:2005 DIN EN ISO 8536-2 Berichtigung 1-2005
Infusion equipment for medical use – Part 11: Infusion filters for use with pressure infusion equipment (ISO 8536-11:2004); German version EN ISO 8536-11:2004 DIN EN ISO 8536-11-2005
Infusion equipment for medical use – Part 10: Accessories for fluid lines for use with pressure infusion equipment (ISO 8536-10:2004); German version EN ISO 8536-10:2004 DIN EN ISO 8536-10-2005
Infusion equipment for medical use – Part 1: Infusion glass bottles (ISO 8536-1:2006); German and English version EN ISO 8536-1:2008 DIN EN ISO 8536-1-2008
Infusion – Infusion equipment and accessories – Part 7: Check valves DIN 58362-7-2002
Information theory; concepts DIN 44301-1984
Information technology; information resource dictionary system (IRDS) framework; identical with ISO/IEC 10027:1990 DIN 66313-1992
Information technology; computer graphics; reference model; identical with ISO/IEC 11072:1992 DIN 66341-1993
Information technology, computer graphics and image processing – Graphical Kernel System (GKS) – Part 1: Functional description (ISO/IEC 7942-1:1994); English version EN ISO/IEC 7942-1:1995 DIN EN ISO/IEC 7942-1-1996
Information technology equipment – Safety – Part 23: Large data storage equipment (IEC 60950-23:2005); German version EN 60950-23:2006, Corrigendum to DIN EN 60950-23 (VDE 0805-23):2006-09; German version CENELEC-Cor. :2008 to EN 60950-23:2006 DIN EN 60950-23 Berichtigung 1-2009
Information technology equipment – Safety – Part 22: Equipment installed outdoors (IEC 60950-22:2005, modified); German version EN 60950-22:2006, Corrigendum to DIN EN 60950-22 (VDE 0805-22):2006-09; German version CENELEC-Cor. :2008 to EN 60950-22:2006 DIN EN 60950-22 Berichtigung 1-2009
Information technology equipment – Safety – Part 22: Equipment installed outdoors (IEC 60950-22:2005, modified); German version EN 60950-22:2006 DIN EN 60950-22-2006
Information technology equipment – Safety – Part 21: Remote power feeding (IEC 60950-21:2002); German version EN 60950-21:2003 DIN EN 60950-21-2003
Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement (IEC/CISPR 22:2005, modified + A1:2005); German version EN 55022:2006 + A1:2007 DIN EN 55022-2008
Information technology – Voice Control Application Programming Interface (VOCAPI) DIN 33880-2001
Information technology – Software document evaluation – Quality characteristics DIN 66270-1998
Information technology – Small Computer System Interface-2 (ISO/IEC 9316:1995); German version EN ISO/IEC 9316:1996 DIN EN ISO/IEC 9316-1997
Information technology – Security techniques – Information security management systems – Requirements (ISO/IEC 27001:2005); English version of DIN ISO/IEC 27001:2008-09 DIN ISO/IEC 27001-2008
Information technology – Security techniques – Evaluation criteria for IT Security – Part 3: Security assurance requirements (ISO/IEC 15408-3:2005); Text in English DIN ISO/IEC 15408-3-2007
Information technology – Security techniques – Evaluation criteria for IT security – Part 2: Security functional requirements (ISO/IEC 15408-2:2005); Text in English DIN ISO/IEC 15408-2-2007
Information technology – Security techniques – Code of practice for information security management (ISO/IEC 27002:2005); English version of DIN ISO 27002:2008-09 DIN ISO/IEC 27002-2008
Information technology – Representation of SI and other units in systems with limited character sets DIN 66030-2002
Information technology – Part 3: Safety of installations with remote power feeding DIN VDE 0800-3-2003
Information technology – Open Systems Interconnection – Application layer structure (ISO/IEC 9545:1994) DIN ISO/IEC 9545-1996
Information technology – Office machines; devices for colour image reproduction – Part 5: Method of specifying image reproduction of colour devices by digital input and analog output as softcopy with colour image reproduction devices: “digital-analog” (monitors), realization and application DIN 33866-5-2000
Information technology – Office machines; devices for colour image reproduction – Part 4: Method of specifying image reproduction of colour devices by analog input and digital output for colour image reproduction devices: “analog-digital” (scanners), realization and application DIN 33866-4-2000
Information technology – Office machines; devices for colour image reproduction – Part 2: Method of specifying image reproduction of colour devices by analog input and analog output for colour image reproduction devices: “analog-analog” (copiers), realization and application DIN 33866-2-2000
Information technology – Office machines; colour image reproduction equipment – Part 1: Method of specifying image reproduction of colour devices by digital and analog test charts; classification and principles DIN 33866-1-2000
Information technology – Office machines – Requirements and test for the preparation of refilled toner modules for electrophotographical printers, copiers and facsimile machines DIN 33870-2001
Information technology – Office equipment – Minimum information to be specified for image scanners (ISO/IEC 14473:1998) DIN ISO/IEC 14473-2000
Information technology – Office equipment – Minimum information to be included in specification sheets for printing devices class 3 and class 4 (ISO/IEC 11160-1:1996) DIN 33869-1998
Information technology – Office equipment – Minimum information to be included in specification sheets for printing devices class 1 and class 2 (ISO/IEC 11160-1:1996) DIN 33868-1998
Information technology – Office equipment – Method for measuring throughput class 1 and class 2 printers (ISO/IEC 10561:1997) DIN ISO/IEC 10561-1998
Information technology – Internet accesses – Part 1: Terminology DIN 66274-1-2008
Information technology – International Standardized Profile FOD126; Open document format: Image applications; Enhanced document structure; Character, raster graphics, and geometric graphics content architecture – Part 1: Document Application Profile (DAP) (ISO/IEC ISP 15124-1:1998); German version EN ISP 15124-1:1998 in english language DIN EN ISP 15124-1-1998
Information technology – International Standardized Profile FOD112; Open document format: Image applications; Simple document structure; Raster graphics content architecture – Part 1: Document Application Profile (DAP) (ISO/IEC ISP 12064-1:1995); German version EN ISP 12064-1:1998 in english language DIN EN ISP 12064-1-1998
Information technology – Implementation and operation of customer premises cabling – Part 3: Testing of optical fibre cabling (ISO/IEC 14763-3:2006) DIN ISO/IEC 14763-3-2009
Information technology – Generic of coding of moving pictures and associated audio information – Part 1: Systems (ISO/IEC 13818-1:1996); English version EN ISO/IEC 13818-1:1997 DIN EN ISO/IEC 13818-1-1997
Information technology – Generic cabling systems – Part 5: Data centers; German version EN 50173-5:2007 DIN EN 50173-5-2007
Information technology – Generic cabling systems – Part 4: Residential premises; German version EN 50173-4:2007 DIN EN 50173-4-2007
Information technology – European character repertoires and their coding – 8 bit single byte coding; German version CEN/TS 1923:2003 DIN CEN/TS 1923-2004
Information technology – Data interchange on 12,7 mm wide magnetic tape cartridges – 18 tracks, 1491 data bytes per millimetre (ISO/IEC 9661:1994); German version EN ISO/IEC 9661:1995 DIN EN ISO/IEC 9661-1997
Information technology – Coded graphic character set for use in the preparation of documents used in electrotechnology and for information interchange (IEC 61286:2001, modified); German version EN 61286:2002 DIN EN 61286-2003
Information technology – Coded graphic character set for text communication – Latin alphabet (ISO/IEC 6937:1994) DIN ISO/IEC 6937-1996
Information technology – Character repertoire and coding for interworking with telex services; German version EN 1922:1997 DIN EN 1922-1997
Information technology – Cabling installation – Testing of installed cabling; German version EN 50346:2002 + A1:2007 DIN EN 50346-2008
Information technology – Cabling installation – Part 3: Installation planning and practices outside buildings; German version EN 50174-3:2003 DIN EN 50174-3-2004
Information technology – Cabling installation – Part 2: Installation planning and practices inside buildings; German version EN 50174-2:2000 DIN EN 50174-2-2001
Information technology – Cabling installation – Part 1: Specification and quality assurance; German version EN 50174-1:2000 DIN EN 50174-1-2001
Information technology – Automatic identification and data capture techniques – Bar code verifier conformance specification – Part 2: Two-dimensional symbols (ISO/IEC 15426-2:2005); English version EN ISO/IEC 15426-2:2006 DIN EN ISO/IEC 15426-2-2006
Information technology – Automatic identification and data capture techniques – Bar code symbology specifications; PDF417 (ISO/IEC 15438:2001); German version EN ISO/IEC 15438:2003 DIN EN ISO/IEC 15438-2003
Information technology – Automatic identification and data capture techniques – Bar code scanner and decoder performance testing (ISO/IEC 15423:2004); English version EN ISO/IEC 15423:2005 DIN EN ISO/IEC 15423-2005
Information technology – Automatic identification and data capture techniques – Bar code print quality test specification; Linear symbols (ISO/IEC 15416:2000); German Version EN ISO/IEC 15416:2001 DIN EN ISO/IEC 15416-2002
Information technology – Automatic identification and data capture techniques – Bar code master test specifications (ISO/IEC 15421:2000); German Version EN ISO/IEC 15421:2001 DIN EN ISO/IEC 15421-2002
Information technology – 7-bit code DIN 66003-1999
Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing; German version EN 376:2002, German and English texts DIN EN 376-2002
Information supplied by the manufacturer of medical devices; German version EN 1041:2008 DIN EN 1041-2008
Information processing; volume and file structure of CD-ROM for information interchange; (ISO 9660:1988) EN 29660 DIN ISO 9660-1990
Information processing; switching algebra, mathematical signs and symbols DIN 66000-1985
Information processing; representation of packed numerics and binary data recorded on 9 tracks on magnetic tape 12 DIN 66005-1988
Information processing; processing functions for linearly ordered data DIN 66263-1984
Information processing; Nassi-Shneiderman flowchart symbols DIN 66261-1985
Information processing; measurement and rating of data processing performance; measuring and rating method DIN 66273-1-1991
Information processing; handwriting of the digit 0 and of the upper case letter O DIN 66002-1975
Information processing; graphical symbols and their application; layout of graphical symbols on a template DIN 66001 Bb.1-1983
Information processing; coding on data media; representation of 7-bit coded and 8-bit coded character sets on punched cards DIN 66004-2-1982
Information processing; coding on data media; representation of 7-bit coded and 8-bit coded character sets on magnetic tape 12 DIN 66004-3-1983
Information processing; coding on data media; representation of 7-bit code character sets on punched tape 25 DIN 66004-1-1983
Information processing; coding of machine readable characters, MICR and OCR DIN 66226-1987
Information processing systems; fibre distributed date interface (FDDI); part 2: token ring media access control (MAC) (ISO 9314-2:1989); English version EN 29314-2:1993 DIN EN 29314-2-1993
Information processing systems; computer graphics; graphical kernel system for three dimensions (GKS-3D) functional description; identical with ISO 8805:1988 DIN ISO 8805-1991
Information processing systems – Flexible disk standards and parameter values – Survey DIN 66329-1997
Information processing systems – Fibre Distributed Data Interface (FDDI) – Part 3: Physical layer Medium Dependent (PMD) (ISO/IEC 9314-3:1990); English version EN ISO 9314-3:1995 DIN EN ISO/IEC 9314-3-1995
Information processing 8-dot-Braille graphic characters – Identifiers, names and assignation to 8-bit-codetables DIN 32982-1994
Information processing – Measurement and rating of data processing performance – Part 4: Workload Type C DIN 66273-4-2002
Information processing – Measurement and rating of data processing performance – Part 2: Workload Type A DIN 66273-2-2000
Information processing – Magnetic tape cassette and cartridge labelling and file structure for information interchange DIN 66229-1997
Information processing – Magnetic ink character recognition – Print specifications (ISO 1004:1995) DIN ISO 1004-1999
Information processing – Conversion between the two coded character sets of ISO 646 and ISO 6937-2 and the CCITT international telegraph alphabet No. 2 (ITA 2) (ISO 6936:1988) DIN ISO 6936-2000
Information interchange; decision table, discription medium DIN 66241-1979
Information and documentation – Requirements for binding of library, archive and other paper documents for archive and library use – Methods and materials DIN 33902-2004
Information and documentation – Requirements for binding materials and methods used in the manufacture of books (ISO 11800:1998) DIN ISO 11800-2002
Information and documentation – Permanence and durability of writing, printing and copying on paper – Requirements and test methods (ISO 11798:1999) DIN ISO 11798-2001
Information and documentation – Paper for documents – Requirements for permanence (ISO 9706:1994) DIN ISO 9706-1995
Information and documentation – International standard music number (ISMN); identical with ISO 10957:1993 DIN ISO 10957-1994
Information and documentation – Codes for the representation of names of countries and their subdivisions – Part 3: Code for formerly used names of countries (ISO 3166-3:1999) DIN ISO 3166-3-2001
Information and documentation – Bibliographic control characters (ISO 6630:1986) DIN ISO 6630-1997
Influence of organic materials on water intended for human consumption – Organoleptic assessment of water in storage systems – Part 1: Test method; German version EN 14395-1:2004 DIN EN 14395-1-2005
Influence of organic materials on water intended for human consumption – Organic materials; Determination of colour and turbidity of water in piping systems – Part 1: Test method; German version EN 13052-1:2001 DIN EN 13052-1-2001
Influence of organic materials on water intended for human consumption – Determination of the chlorine demand – Test method; English version of DIN EN 14718:2006-10 DIN EN 14718-2006
Influence of organic materials on water intended for human consumption – Determination of odour and flavour assessment of water in piping systems – Part 1: Test method; German version EN 1420-1:1999 DIN EN 1420-1-1999
Influence of metallic materials on water intended for human consumption – Dynamic rig test for assessment of metal release – Part 1: Design and operation; German version EN 15664-1:2008 DIN EN 15664-1-2008
Influence of materials on water intended for human consumption – Influence due to migration – Part 3: Test method for ion exchange and adsorbent resins English version of DIN EN 12873-3:2006-06 DIN EN 12873-3-2006
Influence of cementitious products on water intended for human consumption – Test methods – Part 3: Migration of substances from factory-made cementitious products; German version EN 14944-3:2007 DIN EN 14944-3-2009
Influence of cementitious products on water intended for human consumption – Test methods – Part 1: Influence of factory made cementitious products on organoleptic parameters English version of DIN EN 14944-1:2006-07 DIN EN 14944-1-2006
Inflators for inflatable recreational articles – Requirements and testing DIN 32928-2005
Inflatable boats – Part 3: Boats with a maximum motor power rating of 15 kW and greater (ISO 6185-3:2001); German version EN ISO 6185-3:2001 DIN EN ISO 6185-3-2002
Inflatable boats – Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001); German version EN ISO 6185-2:2001 DIN EN ISO 6185-2-2002
Inflatable boats – Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001); German version EN ISO 6185-1:2001 DIN EN ISO 6185-1-2002
Industrial-process measurement and control – Evaluation of system properties for the purpose of system assessment – Part 8: Assessment of non-task-related system properties (IEC 61069-8:1999); German version EN 61069-8:1999 DIN EN 61069-8-2000
Industrial-process measurement and control – Evaluation of system properties for the purpose of system assessment – Part 6: Assessment of system operability (IEC 61069-6:1998); German version EN 61069-6:1998 DIN EN 61069-6-1998
Industrial-process measurement and control – Evaluation of system properties for the purpose of system assessment – Part 5: Assessment of system dependability (IEC 61069-5:1994); German version EN 61069-5:1995 DIN EN 61069-5-1995
Industrial-process measurement and control – Evaluation of system properties for the purpose of system assessment – Part 1: General considerations and methodology (IEC 61069-1:1991); German version EN 61069-1:1993 DIN EN 61069-1-1994
Industrial-process control valves – Part 9: Test procedure for response measurements from step inputs (IEC 60534-9:2007); German version EN 60534-9:2007 DIN EN 60534-9-2008
Industrial-process control valves – Part 8-4: Noise considerations – Prediction of noise generated by hydrodynamic flow (IEC 60534-8-4:2005 + Corrigendum 1:2006); German version EN 60534-8-4:2005 DIN EN 60534-8-4-2006
Industrial-process control valves – Part 8-3: Noise considerations; Control valve aerodynamic noise prediction method (IEC 60534-8-3:2000); German version EN 60534-8-3:2000 DIN EN 60534-8-3-2001
Industrial-process control valves – Part 6-2: Mounting details for attachment of positioners to control valves – Positioner mounting on rotary actuators (IEC 60534-6-2:2000); German version EN 60534-6-2:2001 DIN EN 60534-6-2-2001
Industrial-process control valves – Part 6: Mounting details for attachment of positioners to control valves – Section 1: Postioner mounting on linear actuators (IEC 60534-6-1:1997); German version EN 60534-6-1:1997 DIN EN 60534-6-1-1998
Industrial-process control valves – Part 2-3: Flow capacity; test procedures (IEC 60534-2-3:1997); German version EN 60534-2-3:1998 DIN EN 60534-2-3-1998
Industrial-process control systems – Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 61514:2000); German version EN 61514:2002 DIN EN 61514-2002
Industrial-process control systems – Classification of adaptive controllers for the purpose of evaluation (IEC 61297:1995); German version EN 61297:1995 DIN EN 61297-1996
Industrial-process control – Safety of analyser houses (IEC 61285:2004); German version EN 61285:2004 DIN EN 61285-2005
Industrial, commercial and garage doors and gates – Terminology – Part 1: Types of doors; Trilingual version EN 12433-1:1999 DIN EN 12433-1-2000
Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Test methods; German version EN 12445:2000 DIN EN 12445-2001
Industrial, commercial and garage doors and gates – Safety in use of power operated doors – Requirements; German version EN 12453:2000 DIN EN 12453-2001
Industrial, commercial and garage doors and gates – Resistance to wind load – Classification; German version EN 12424:2000 DIN EN 12424-2000
Industrial, commercial and garage doors and gates – Resistance to water penetration – Classification; German version EN 12425:2000 DIN EN 12425-2000
Industrial, commercial and garage doors and gates – Product Standard – Part 1: Products without fire resistance or smoke control characteristics; German version EN 13241-1:2003 DIN EN 13241-1-2004
Industrial, commercial and garage doors and gates – Mechanical aspects – Test methods; German version EN 12605:2000 DIN EN 12605-2000
Industrial, commercial and garage doors and gates – Mechanical aspects – Requirements; German version EN 12604:2000 DIN EN 12604-2000
Industrial, commercial and garage doors and gates – Installation and use; German version EN 12635:2002+A1:2008 DIN EN 12635-2009
Industrial, commercial and garage doors and gates – Air permeability – Test method; German version EN 12427:2000 DIN EN 12427-2000
Industrial, commercial and garage doors and gates – Air permeability – Classification; German version EN 12426:2000 DIN EN 12426-2000
Industrial wire screens and woven wire cloth – Guide to the choice of aperture size and wire diameter combinations – Part 3: Preferred combinations for pre-crimped or pressure-welded wire screens; identical with ISO 4783-3:1981 DIN ISO 4783-3-1996
Industrial valves – Testing of valves – Part 2: Tests, test procedures and acceptance criteria; Supplementary requirements; German version EN 12266-2:2002 DIN EN 12266-2-2003
Industrial valves – Testing of valves – Part 1: Pressure tests, test procedures and acceptance criteria – Mandatory requirements; German version EN 12266-1:2003 DIN EN 12266-1-2003
Industrial valves – Steel gate valves; German version EN 1984:2000 DIN EN 1984-2000
Industrial valves – Steel ball valves; English version of DIN EN 1983:2006 DIN EN 1983-2006
Industrial valves – Shell design strength – Part 4: Calculation method for valve shells manufactured in metallic materials other than steel; English version of DIN EN 12516-4:2008-05 DIN EN 12516-4-2008
Industrial valves – Shell design strength – Part 1: Tabulation method for steel valve shells; German version EN 12516-1:2005 DIN EN 12516-1-2005
Industrial valves – Protective caps for valves with flanged connections; German version EN 12351:1999 DIN EN 12351-1999
Industrial valves – Performance characteristics of thermoplastic valves when used as construction products; English version of DIN EN 15389:2008-10 DIN EN 15389-2008
Industrial valves – Multi-turn valve actuator attachments (ISO 5210:1991); German version EN ISO 5210:1996 DIN EN ISO 5210-1996
Industrial valves – Mounting kits for part-turn valve actuator attachment; English version of DIN EN 15081:2008-03 DIN EN 15081-2008
Industrial valves – Method for sizing the operating element; German version EN 12570:2000 DIN EN 12570-2000
Industrial valves – Measurement, test and qualification procedures for fugitive emissions – Part 2: Production acceptance test of valves (ISO 15848-2:2006); English version of DIN EN ISO 15848-2:2006-11 DIN EN ISO 15848-2-2006
Industrial valves – Measurement, test and qualification procedures for fugitive emissions – Part 1: Classification system and qualification procedures for type testing of valves (ISO 15848-1:2006); English version of DIN EN ISO 15848-1:2006-04 DIN EN ISO 15848-1-2006
Industrial valves – Globe valves of thermoplastics materials (ISO 21787:2006); German version EN ISO 21787:2006, Corrigenda to DIN EN ISO 21787:2006-06 DIN EN ISO 21787 Berichtigung 1-2008
Industrial valves – Gate valves of thermoplastics materials (ISO 16139:2006); German version EN ISO 16139:2006, Corrigenda to DIN EN ISO 16139:2006-06 DIN EN ISO 16139 Berichtigung 1-2008
Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – PN and Class designated valves; German version EN 558:2008, Corrigendum to DIN EN 558:2008-05 DIN EN 558 Berichtigung 1-2008
Industrial valves – Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems – PN and Class designated valves; English version of DIN EN 558:2008-05 DIN EN 558-2008
Industrial valves – Diaphragm valves of thermoplastics materials (ISO 16138:2006); German version EN ISO 16138:2006, Corrigenda to DIN EN ISO 16138:2006-06 DIN EN ISO 16138 Berichtigung 1-2008
Industrial valves – Diaphragm valves of thermoplastics materials (ISO 16138:2006); English version of DIN EN ISO 16138:2006-06 DIN EN ISO 16138-2006
Industrial valves – Diaphragm valves made of metallic materials; German version EN 13397:2001 DIN EN 13397-2002
Industrial valves – Copper alloy ball valves; German version CEN/TS 13547:2006 DIN CEN/TS 13547-2007
Industrial valves – Check valves of thermoplastics materials (ISO 16137:2006); English version of DIN EN ISO 16137:2006-06 DIN EN ISO 16137-2006
Industrial valves – Cast iron globe valves; German version EN 13789:2002 DIN EN 13789-2003
Industrial valves – Cast iron check valves; German version EN 12334:2001 + A1:2004 DIN EN 12334-2004
Industrial valves – Butterfly valves of thermoplastics materials (ISO 16136:2006); German version EN ISO 16136:2006, Corrigenda to DIN EN ISO 16136:2006-06 DIN EN ISO 16136 Berichtigung 1-2008
Industrial valves – Butterfly valves of thermoplastics materials (ISO 16136:2006); English version of DIN EN ISO 16136:2006-06 DIN EN ISO 16136-2006
Industrial valves – Ball valves of thermoplastics materials (ISO 16135:2006); German version EN ISO 16135:2006, Corrigenda to DIN EN ISO 16135:2006-06 DIN EN ISO 16135 Berichtigung 1-2008
Industrial valves – Ball valves of thermoplastics materials (ISO 16135:2006); English version of DIN EN ISO 16135:2006-06 DIN EN ISO 16135-2006
Industrial trucks; trapezoidblock-springs for axles of handcarts and trailers DIN 3019-1972
Industrial trucks; trailer couplings; connecting dimensions, requirements, testing DIN 15170-1987
Industrial trucks; supermarket trolleys, with platform for carrying on conveyers; safety requirements and testing DIN 32601-3-1993
Industrial trucks; platforms for hand trucks and trailers; main dimensions DIN 8457-1967
Industrial trucks; drawbars for trailers, main dimensions DIN 8454-1962
Industrial trucks, hand-carriage and trailer, movement-wheels, symbols, terms, explanations DIN 4902-1972
Industrial trucks – Electromagnetic compatibility; German version EN 12895:2000 DIN EN 12895-2001
Industrial thermoprocessing equipment – Part 5: Particular safety requirements for salt bath thermoprocessing equipment; German version EN 746-5:2000 DIN EN 746-5-2001
Industrial thermoprocessing equipment – Part 4: Particular safety requirements for hot dip galvanising thermoprocessing equipment; German version EN 746-4:1999 DIN EN 746-4-2000
Industrial thermoprocessing equipment – Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment; German version EN 1547:2001 DIN EN 1547-2001
Industrial systems, installations and equipments and industrial products – Designation of signals (IEC 61175:2005); German version EN 61175:2005 DIN EN 61175-2006
Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations – Discussion of concepts (IEC 61346-4:1998) DIN EN 61346 Bb.2-1999
Industrial systems, installations and equipment and industrial products – Structuring principles and reference designations – Application guidelines (IEC/TR 61346-3:2001) DIN EN 61346 Bb.1-2002
Industrial systems, installations and equipment and industrial products – Identification of terminals within a system (IEC 61666:1997); German version EN 61666:1997 DIN EN 61666-1998
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 200; dimensions and nominal ranges DIN 16189-1991
Industrial straight stem liquid-in-glass thermometers with V-shaped case, of nominal size 150; dimensions and nominal ranges DIN 16185-1991
Industrial sewing machines; presser foot, fitting dimensions DIN 5318-1-1978
Industrial sewing machines; presser bar with prismatical support, fitting dimensions DIN 5319-1978
Industrial sewing machines – Safety requirements for sewing machines, units and systems (ISO 10821:2005); English version of DIN EN ISO 10821:2005 DIN EN ISO 10821-2005
Industrial screens and screening – Vocabulary (ISO 9045:1990) DIN ISO 9045-1998
Industrial screens – Woven wire cloth, perforated plate and electroformed sheet – Designation and nominal sizes of openings (ISO 2194:1991) DIN ISO 2194-1998
Industrial safety helmets (includes Amendment A1:2000); German version EN 397:1995 + A1:2000 DIN EN 397-2000
Industrial process control systems – Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs (IEC 61514-2:2004); German version EN 61514-2:2004 DIN EN 61514-2-2004
Industrial platinum resistance thermometer sensors (IEC 60751:1983 + AMD 1:1986 + AMD 2:1995); German version EN 60751:1995 + A2:1995 DIN EN 60751-1996
Industrial electroheating installations – Test methods for induction channel and induction crucible furnaces (IEC 62076:2006); German version EN 62076:2006 DIN EN 62076-2007
Industrial electroheating installations – General test methods (IEC 60398:1999); German version EN 60398:1999 DIN EN 60398-2000
Industrial electro-heat equipment; power measurement on high-frequency appliances for induction heating equipment, measuring method for determination of power output of high-frequency generators DIN 48600-1979
Industrial construction; traffic ways in industrial buildings; regulations DIN 18225 Bb.1-1988
Industrial construction; traffic ways in industrial buildings DIN 18225-1988
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces – Part 3: Smart Distributed System (SDS); German version EN 50325-3:2001, text English DIN EN 50325-3-2001
Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces – Part 2: DeviceNet; German version EN 50325-2:2000, text english DIN EN 50325-2-2001
Industrial communication networks – Profiles – Part 5-6: Installation of fieldbuses – Installation profiles for CPF 6 (IEC 61784-5-6:2007); German version EN 61784-5-6:2008 DIN EN 61784-5-6-2009
Industrial communication networks – Profiles – Part 5-2: Installation of fieldbuses – Installation profiles for CPF 2 (IEC 61784-5-2:2007); German version EN 61784-5-2:2008 DIN EN 61784-5-2-2009
Industrial communication networks – Profiles – Part 5-11: Installation of fieldbuses – Installation profiles for CPF 11 (IEC 61784-5-11:2007); German version EN 61784-5-11:2008 DIN EN 61784-5-11-2009
Industrial communication networks – Profiles – Part 5-10: Installation of fieldbuses – Installation profiles for CPF 10 (IEC 61784-5-10:2007); German version EN 61784-5-10:2008 DIN EN 61784-5-10-2009
Industrial communication networks – Profiles – Part 3-6: Functional safety fieldbuses – Additional specifications for CPF 6 (IEC 61784-3-6:2007); English version EN 61784-3-6:2008 DIN EN 61784-3-6-2008
Industrial communication networks – Profiles – Part 3-3: Functional safety fieldbuses – Additional specifications for CPF 3 (IEC 61784-3-3:2007); English version EN 61784-3-3:2008 DIN EN 61784-3-3-2008
Industrial communication networks – Profiles – Part 3-2: Functional safety fieldbuses – Additional specifications for CPF 2 (IEC 61784-3-2:2007); English version EN 61784-3-2:2008 DIN EN 61784-3-2-2008
Industrial communication networks – Profiles – Part 3-1: Functional safety fieldbuses – Additional specifications for CPF 1 (IEC 61784-3-1:2007); English version EN 61784-3-1:2008 DIN EN 61784-3-1-2008
Industrial communication networks – Profiles – Part 3: Functional safety fieldbuses – General rules and profile definitions (IEC 61784-3:2007); German version EN 61784-3:2008 DIN EN 61784-3-2008
Industrial communication networks – Profiles – Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 (IEC 61784-2:2007); English version EN 61784-2:2008, only on CD-ROM DIN EN 61784-2-2008
Industrial communication networks – Profiles – Part 1: Fieldbus profiles (IEC 61784-1:2007); English version EN 61784-1:2008, only on CD-ROM DIN EN 61784-1-2008
Industrial communication networks – Installation of communication networks in industrial premises (IEC 61918:2007, modified); German version EN 61918:2008 DIN EN 61918-2009
Industrial communication networks – Fieldbus specifications – Part 6-9: Application layer protocol specification – Type 9 elements (IEC 61158-6-9:2007); English version EN 61158-6-9:2008, only on CD-ROM DIN EN 61158-6-9-2008
Industrial communication networks – Fieldbus specifications – Part 6-8: Application layer protocol specification – Type 8 elements (IEC 61158-6-8:2007); English version EN 61158-6-8:2008, only on CD-ROM DIN EN 61158-6-8-2008
Industrial communication networks – Fieldbus specifications – Part 6-7: Application layer protocol specification – Type 7 elements (IEC 61158-6-7:2007); English version EN 61158-6-7:2008, only on CD-ROM DIN EN 61158-6-7-2008
Industrial communication networks – Fieldbus specifications – Part 6-5: Application layer protocol specification – Type 5 elements (IEC 61158-6-5:2007); English version EN 61158-6-5:2008, only on CD-ROM DIN EN 61158-6-5-2008
Industrial communication networks – Fieldbus specifications – Part 6-4: Application layer protocol specification – Type 4 elements (IEC 61158-6-4:2007); English version EN 61158-6-4:2008, only on CD-ROM DIN EN 61158-6-4-2008
Industrial communication networks – Fieldbus specifications – Part 6-3: Application layer protocol specification – Type 3 elements (IEC 61158-6-3:2007); English version EN 61158-6-3:2008, only on CD-ROM DIN EN 61158-6-3-2008
Industrial communication networks – Fieldbus specifications – Part 6-20: Application layer protocol specification – Type 20 elements (IEC 61158-6-20:2007); English version EN 61158-6-20:2008, only on CD-ROM DIN EN 61158-6-20-2008
Industrial communication networks – Fieldbus specifications – Part 6-2: Application layer protocol specification – Type 2 elements (IEC 61158-6-2:2007); English version EN 61158-6-2:2008, only on CD-ROM DIN EN 61158-6-2-2008
Industrial communication networks – Fieldbus specifications – Part 6-19: Application layer protocol specification – Type 19 elements (IEC 61158-6-19:2007); English version EN 61158-6-19:2008, only on CD-ROM DIN EN 61158-6-19-2008
Industrial communication networks – Fieldbus specifications – Part 6-18: Application layer protocol specification – Type 18 elements (IEC 61158-6-18:2007); English version EN 61158-6-18:2008, only on CD-ROM DIN EN 61158-6-18-2008
Industrial communication networks – Fieldbus specifications – Part 6-17: Application layer protocol specification – Type 17 elements (IEC 61158-6-17:2007); English version EN 61158-6-17:2008, only on CD-ROM DIN EN 61158-6-17-2008
Industrial communication networks – Fieldbus specifications – Part 6-16: Application layer protocol specification – Type 16 elements (IEC 61158-6-16:2007); English version EN 61158-6-16:2008, only on CD-ROM DIN EN 61158-6-16-2008

http://www.int-bizdirectory.com/
http://www.int-bizdirectory.com/standards.htm